Polaris Sportsman 800 EFI - 2008 Fuse Box Diagram

Polaris Sportsman 800 EFI - 2008 Fuse Box Diagram

95
MAINTENANCE
Air Filter
1.
Remove the seat.
2.
Release the air box cover clips,
and remove the air box cover.
3.
Loosen the clamp and remove
the filter.
4.
Remove the fabric type pre-filter
from the main filter. Wash the
pre-filter in soapy water, then
rinse and let dry.
5.
Reinstall the pre-filter over the
main filter.
NOTE:
Install a new main filter if
needed.
6.
Reinstall the filter into the air
box and tighten the clamp. Do
not over-tighten the clamp, as
filter damage could occur.
7.
Reinstall the air box cover and the seat.
Fuse Replacement
If the engine stops or will not start,
or if you experience other electrical
failures, a fuse may need replace-
ment. Locate and correct any short
circuits that may have caused the
blown fuse, then replace the fuse.
NOTE:
Spare fuses are provided in a
compartment on the top of the
access door.
1.
Open the front box cover and
pull open the access door.
2.
Remove the suspect fuse from
the fuse panel. If the fuse is
blown, install a new fuse with
the same amperage.
3.
Secure the access door.
4.
Secure the box cover.
Main Filter
Pre-Filter
Fuse Panel
Fuses
5
or
6 15 20
20