Polaris SPORTSMAN 850 HIGH LIFTER - 2017 Fuse Box Diagram

Polaris SPORTSMAN 850 HIGH LIFTER - 2017 Fuse Box Diagram

35
FEATURES AND CONTROLS
Front Compartment
Open or remove the front rack, box or fan shroud to access the front
compartment components.
Fan Shroud
Release the front fan shroud
latches and remove the shroud to
gain access to the front
compartment.
Always reinstall
the shroud and secure the latches
before operating the vehicle.
Radiator Cap
Cooler
Electrical/Fuse/Relay
Latches
81
WINCH GUIDE
Winch Cable Care
For your safety, always replace POLARIS winch parts (including the
cable) with genuine POLARIS replacement parts available at your
authorized POLARIS dealer or other qualified personnel.
WARNING!
Use of worn or damaged cable could lead to sudden failure and
SEVERE INJURY.
1.
Always inspect your winch before each use. Inspect for worn or
loose parts including mounting hardware. Never use the winch if
any part needs repair or replacement.
2.
Always inspect your winch cable before each use. Inspect for worn
or kinked winch cable.
A.
A kinked winch cable made of
wire rope is shown at right. Even
after being “straightened out,”
this cable has already been
permanently and severely
damaged. Promptly discontinue
use of a winch cable in this
condition.
B.
A kinked winch cable made of
wire rope that has been
“straightened out” is shown at
right. Even though it may look
usable, the cable has been
permanently and severely damaged. It can no longer transmit the load
that it could prior to kinking. Promptly discontinue use of a winch cable
in this condition.
C.
A winch cable made of
synthetic rope should be
inspected for signs of fraying.
Replace the cable if fraying is
observed (shown at right).
Promptly discontinue use of a
winch cable in this condition.
D.
Also replace the winch cable if there are fused or melted fibers. Such
an area of the synthetic rope will be stiff and appear smooth or glazed.
Promptly discontinue use of a winch cable in this condition.
A
B
C
108
MAINTENANCE
Fuse Replacement
If the engine stops or will not start, or if you experience other electrical
failures, a fuse may need replacement. Locate and correct any short
circuits that may have caused the blown fuse, then replace the fuse.
Spare fuses are provided in the fuse box.
1.
Open or remove the front rack, box or fan shroud to access the fuse
box. See pages 35-36.
2.
Remove the fuse box cover.
3.
Remove the suspect fuse from the fuse panel. If the fuse is blown,
install a new fuse with the same amperage rating.
4.
Reinstall the fuse box cover.
5.
Close and secure the front rack, box or fan shroud and cover.
Fuse Box
141
WARRANTY
Warranty Coverage And Exclusions:
Limitations Of Warranties And Remedies
This warranty excludes damages or failures caused by abuse, accident, fire, or any other
cause other than a defect in materials or workmanship and provides no coverage for
consumable components, general wear items, or any parts exposed to friction surfaces,
stresses, environmental conditions and/or contamination for which they were not
designed or not intended, including but not limited to the following items:
Lubricants and Fluids
1. Mixing oil brands or using non-recommended oil may cause engine damage. We
recommend the use of POLARIS engine oil.
2. Damage or failure resulting from the use of non-recommended lubricants or fluids is
not covered by this warranty.
This warranty provides no coverage for personal loss or expense, including mileage,
transportation costs, hotels, meals, shipping or handling fees, product pick-up or
delivery, replacement rentals, loss of product use, loss of profits, or loss of vacation or
personal time.
Wheels and tires
Finished and unfinished surfaces
Suspension components
Carburetor/Throttle body components
Brake components
Engine components
Seat components
Drive belts
Clutches and components
Hydraulic components and fluids
Steering components
Circuit breakers/Fuses
Batteries
Electronic components
Light bulbs/Sealed beam lamps
Spark plugs
Filters
Sealants
Lubricants
Coolants
Bushings
Bearings