Polaris Breeze - 2011 Fuse Box Diagram

Polaris Breeze - 2011 Fuse Box Diagram

40
FEATURES AND CONTROLS
Multifunction Light
If the light does not illuminate, the vehicle could be in sleep mode.
Toggle the master ON/OFF switch off and back on to wake up. If
this is unsuccessful, check the battery voltage, battery cable connec-
tions and chassis fuse.
Multifunction Light Troubleshooting Guide
Flash
Sequence
Solution
1 Flash
The system controller has an internal error. See your Polaris
dealer for service.
2 Flashes
Move the master on/off switch to OFF. Inspect electrical con-
nections to the direction selector switch. Return the master on/
off switch to ON. If the light continues to flash, see your Polaris
dealer for service.
3 Flashes
Move the master on/off switch to OFF. Inspect electrical con-
nections to the motor. Return the master on/off switch to ON. If
the light continues to flash, see your Polaris dealer for service.
4 Flashes
The line contactor requires service. See your Polaris dealer for
service.
6 Flashes
Move the master on/off switch to OFF. Inspect electrical con-
nections to the accelerator pedal. Return the master on/off
switch to ON. If the light continues to flash, see your Polaris
dealer for service.
7 Flashes
Battery voltage is low. Move the master on/off switch to OFF.
Check battery cable connections. Return the master on/off
switch to ON. If the light continues to flash, move the master
on/off switch to OFF and use a battery tester to check each bat-
tery.
79
MAINTENANCE
Lights
Brake Lights
When the brake pedal is depressed, the brake light comes on. Check the
brake light before each ride.
1.
Turn the ignition switch to the ON position.
2.
Apply the brakes.If the light doesn't come on, check the wiring, the
brake switch or the tail light assembly.
Light Fuse
If all lights are non-funtional, the fuse PN 7.5A 5A 10A might be need
to be replaced. The fuse is located under the seat near the controller.
Fuse
87
TROUBLESHOOTING
Vehicle and Reverse Buzzer Doesn’t Operate
Vehicle Doesn’t Operate
All Lighting Non-Functional
Batteries Won’t Charge
Possible Cause
Solution
Vehicle in Sleep Mode
Slightly depress and release the accelera-
tor, or toggle the master on/off switch
Low battery voltage
Recharge the battery overnight, check
charger status lights for correct operation
Loose battery connections
Check all connections and tighten
Loose contactor connections
Check all connections and tighten
Loose electronic control box connections
Inspect, clean, reinstall connectors
Blown fuse
Check chassis fuse
Possible Cause
Solution
Accelerator pedal depressed when turning
the key switch on
Return accelerator pedal to rest position
FNR switch in neutral
Place FNR in desired direction of travel
Controller fault
Refer to Multi Function Light Trouble-
shooting Guide
Possible Cause
Solution
Loose connection
Check DC-DC converter connection
Blown Fuse
Check lighting fuse
Possible Cause
Solution
Very Low battery voltage
If battery voltage is less than 9V, the
charger won’t turn on. Contact dealer to
have batteries recharged.
Charger fault
Refer to Charger Status Dispaly Trouble-
shooting Guide