Kia Soul EV - 2016 Fuse Box Diagram

Kia Soul EV - 2016 Fuse Box Diagram

3 41
Safety features of your vehicle
If an air bag deploys, there may be
a loud noise followed by a fine dust
released in the vehicle. These con-
ditions are normal and are not haz-
ardous - the air bags are packed in
this fine powder. The dust generat-
ed during air bag deployment may
cause skin or eye irritation as well
as aggravate asthma for some per-
sons. Always wash all exposed
skin areas thoroughly with luke-
warm water and a mild soap after
an accident in which the air bags
were deployed.
• The SRS can function only when
the POWER button is in the ON
position. If the SRS air bag warning
light does not illuminate, or contin-
uously remains on after illuminat-
ing for about 6 seconds when the
POWER button is turned to the ON
position, or after the vehicle is in
the ready (
) mode, comes on
while driving, the SRS is not work-
ing properly. If this occurs, have
your vehicle immediately inspected
by an authorized Kia dealer.
NOTICE
Before you replace a fuse or discon-
nect a battery terminal, turn the
vehicle off. Never remove or replace
the air bag related fuse(s) when the
POWER button is in the ON posi-
tion. Failure to heed this warning
will cause the SRS air bag warning
light to illuminate.
Occupant Detection System
(ODS)
Your vehicle is equipped with an
occupant detection system in the
front passenger's seat.
The occupant detection system is
designed to detect the presence of a
properly-seated front passenger and
determine if the passenger's front air
bag should be enabled (may inflate)
or not. Only the front passenger front
air bag is controlled by the Occupant
Detection System.
Do not put anything in front of the
passenger air bag
indicator.
WARNING
- Flying objects
Do not place any objects (an
umbrella, bag, etc.) between the
front door and the front seat.
Such objects may become dan-
gerous projectiles if the side
airbag inflates.
OPSE035035N
4 21
Features of your vehicle
When the power window lock
switch is pressed :
- The driver's master control can
operate all the power windows.
- The front passenger's control can
operate the front passenger's
power window.
- The rear passenger's control can-
not operate the rear passenger's
power window.
Always double check to make sure
all arms, hands, head and other
obstructions are safely out of the way
before closing a window.
CAUTION
- Opening /
closing Window
To prevent possible damage to
the power window system, do
not open or close two windows
or more at the same time. This
will also ensure the longevity of
the fuse.
WARNING
- Power
windows
Do not allow children to play
with the power windows. Keep
the power window lock switch
(on the driver's door) in the
LOCK (pressed) position.
4 49
Features of your vehicle
Service interval OFF
If the service interval is not set,
“Service interval OFF” message is
displayed on the LCD display.
NOTICE
If any of the following conditions
occurs, the mileage and days may be
incorrect.
-
The battery cable is disconnected.
-
The fuse switch is turned off.
-
The battery is discharged.
Master Warning Mode
This warning light informs the driver
the following situations
- TPMS
- Service reminder
- Low washer fluid
The Master Warning Light illumi-
nates when more than one of the
above warning situations occur. At
this time, the LCD Modes Icon will
change from (
) to (
).
If the warning situation is solved, the
LCD Modes Icon will be changed back
to its previous icon (
).
User Settings Mode
Description
On this mode, you can change set-
ting of the doors, lamps, and so on.
OPSE044212L
OTF044192L
Features of your vehicle
58
4
Press POWER button again
• This warning message illuminates
if you can not operate the POWER
button when there is a problem
with the POWER button system.
• It means that you could start the
engine by pressing the POWER
button once more.
• If the warning illuminates each
time you press the POWER button,
have your vehicle inspected by an
authorized Kia dealer.
Press POWER button with key
• This warning message illuminates
if you press the POWER button
while the warning message “Key
not detected” is illuminating.
At this time, the immobilizer indica-
tor light blinks.
Check BRAKE SWITCH fuse
• This warning message illuminates
if the brake switch fuse is discon-
nected.
• It means that you should replace
the fuse with a new one.If that is not
possible, you can start the engine
by pressing the POWER button for
10 seconds in the ACC position.
OPSE044157L
OPSE044144L
OPSE044146L
4 59
Features of your vehicle
Door Open
It means that any door is open.
Tailgate Open
It means that the tailgate is open.
Turn on FUSE SWITCH
• This warning message illuminates
if the fuse switch on the fuse box is
OFF.
• It means that you should turn the
fuse switch on.
For more details, refer to “Fuses” in
chapter 7.
OPSE043121
OPSE044154L
OPSE043122
Driving your vehicle
8
5
• If the battery is weak or the smart
key does not work correctly, you
can start the vehicle by pressing
the POWER button with the smart
key.
The side with the lock button
should contact the POWER button
directly.
When you press the POWER but-
ton directly with the smart key, the
smart key should contact the
POWER button at a right angle.
When the stop lamp fuse is blown,
you can't start the vehicle normally.
Replace the fuse with a new one. If
it is not possible, you can start the
vehicle by pressing the POWER
button for 10 seconds
while it is in
the ACC position. The vehicle can
start with depressing the brake
pedal.
Do not press the POWER button for
more than 10 seconds except when
the stop lamp fuse is blown.
Pedestrian Warning System
The Pedestrian Warning System
generates engine sound for pedestri-
ans to hear vehicle sound because
there is little sound while the Electric
Vehicle (EV) is operating.
If the vehicle is moving low speed,
the Pedestrian Warning System will
operated.
- When the reduction gear is shifted to
[R], the Pedestrian Warning System
will be operated immediately.
OPSE054005
Maintenance
2
7
MOTOR ROOM COMPARTMENT
OPSE075001
1. Coolant reservoir
2. Brake fluid reservoir
3. Fuse box
4. Positive battery terminal
5. Negative battery terminal
6. Radiator cap
7. Windshield washer fluid reservoir
The actual motor compartment in the vehicle may differ from the illustration.
7 47
Maintenance
FUSES
A vehicle’s electrical system is pro-
tected from electrical overload dam-
age by fuses.
This vehicle has 3 (or 4) fuse panels,
one located in the driver’s side panel
bolster, the other in the motor com-
partment near the battery.
If any of your vehicle’s lights, acces-
sories, or controls do not work, check
the appropriate circuit fuse. If a fuse
has blown, the element inside the
fuse will
melt.
If the electrical system does not
work, first check the driver’s side
fuse panel.
Always replace a blown fuse with
one of the same rating.
If the replacement fuse blows, this
indicates an electrical problem. Avoid
using the system involved and imme-
diately consult an authorized Kia
dealer.
Three kinds of fuses are used: micro
mini type for lower amperage rating,
cartridge type, and multi fuse for
higher amperage ratings.
• Replace the fuse with the ignition
“OFF”, switch off of all electrical
devices and then separation (-) ter-
minal from the battery in a safe
place.
Do not arbitrarily modify or add-on
electric wiring of the vehicle.
WARNING
- Fuse
replacement
Never replace a fuse with any-
thing but another fuse of the
same rating.
• A higher capacity fuse could
cause damage and possibly a
fire.
• Never install a wire or alu-
minum foil instead of the
proper fuse - even as a tempo-
rary repair.
It may cause
extensive wiring damage and
a possible fire.
OPS073054
Normal
Normal
Micro mini type
Cartridge type
Multi fuse
Blown
Blown
Normal
Blown
Maintenance
48
7
NOTICE
The actual fuse/relay panel label
may differ depending on equip-
ment/options.
WARNING
- Fuse fire
• When replacing a blown fuse
or relay with a new one, make
sure the new fuse or relay fits
tightly into the clips The
incomplete fastening fuse or
relay may cause the vehicle
wiring and electric systems
damage and a possible fire.
• Do not remove fuses, relays
and terminals fastened with
bolts or nuts.The fuses, relays
and terminals may be fastened
incompletely, and it may cause
a possible fire. If fuses, relays
and terminals fastened with
bolts or nuts are blown, we
recommend that you consult
with an authorized Kia dealer.
CAUTION
- Fuse
Replacement
Do not use a screwdriver or any
other metal object to remove
fuses because it may cause a
short circuit and damage the
system.
CAUTION
- Fuse
Replacement
Do not input any other objects
except fuses or relays into
fuse/relay terminals such as a
driver or wiring. It may cause
contact failure and system mal-
function.
WARNING
- Electrical Fire
• Always ensure replacements
fuses and relays are securely
fastened
when
installed.
Failure to do so can result in a
vehicle fire.
We recommend that you do not
remove fuses, relays and termi-
nals that are fastened with
bolts or nuts. If they are not
completely re-installed, such
looseness may cause electrical
arcing and a possible fire. If
fuses, relays and terminals fas-
tened with bolts or nuts need
replacement, consult with an
authorized Kia dealer.
7 49
Maintenance
Inner panel fuse replacement
1. Turn the ignition switch and all
other switches off.
2. Open the fuse panel cover.
3. Pull the suspected fuse straight
out. Use the fuse puller provided
on the motor compartment fuse
panel cover.
4. Check the removed fuse; replace it
if it is blown.
Spare fuses are provided in the
motor compartment fuse panel.
5. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips.
If it fits loosely, consult an authorized
Kia dealer.
If you do not have a spare, use a
fuse of the same rating from a circuit
you may not need for operating the
vehicle, such as the power outlet
fuse.
If the headlights or other electrical
components do not work and the
fuses are OK, check the fuse panel
in the motor compartment. If a fuse is
blown, it must be replaced.
OPSE074007
OPSE075006N
Maintenance
50
7
Fuse switch
Always, put the fuse switch at the ON
position.
If you move the switch to the OFF
position, some items such as audio
and digital clock must be reset and
transmitter (or smart key) may not
work properly.
NOTICE
If you need to park your vehicle for
prolonged periods more than 1
month, move the transportation fuse
switch to the OFF position to pre-
vent the battery being discharged.
Motor compartment fuse
replacement
1. Turn the ignition switch and all
other switches off.
2. Remove the fuse panel cover by
pressing the tab and pulling the
cover up.
3. Check the removed fuse; replace it
if it is blown. To remove or insert
the fuse, use the fuse puller in the
motor compartment fuse panel.
4. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips. If it fits loosely, consult
an authorized Kia dealer.
OPSE074009
OPSE075008N
7 51
Maintenance
Multi fuse
If the multi fuse is blown, it must be
removed as follows:
1. Turn off the vehicle.
2. Disconnect the negative battery
cable.
3. Remove the nuts shown in the pic-
ture above.
4. Replace the fuse with a new one
of the same rating.
5. Reinstall in the reverse order of
removal.
NOTICE
If the multi fuse is blown, consult an
authorized Kia dealer.
CAUTION
- Fuse panel
covers
After checking the fuse panel in
the motor compartment, secure-
ly install the fuse panel cover
with using cover locking sound.
If not, electrical failures may
occur from water contact.
OPSE074033
Maintenance
52
7
Fuse/relay panel description
Inside the fuse/relay panel covers,
you can find the fuse/relay label
describing fuse/relay name and
capacity.
NOTICE
Not all fuse panel descriptions in
this manual may be applicable to
your vehicle. It is accurate at the
time of printing. When you inspect
the fuse panel in your vehicle, refer
to the fuse panel label.
OPSE075010N
OPSE075028N
7 53
Maintenance
Instrument panel (Driver’s side fuse panel)
Fuse Name
Fuse rating
Circuit Protected
POWER OUTLET 2
20A
Front Power Outlet
ACC
10A
BCM, Mood Lamp Module, A/V & Navigation Head Unit, Smart Key Control Module, Power Outside Mirror
Switch, E/R Junction Block (Power Outlet Relay)
POWER OUTLET 1
20A
Rear Power Outlet
DRL
10A
BCM
MODULE 6
7.5A
Front Seat Warmer Module, Driver Air Ventilation Seat Control Module
WIPER FRT 1
25A
E/R Junction Block (Front Wiper Low Relay)
WIPER RR
15A
Rear Wiper Motor, Multifunction Switch
MODULE 5
7.5A
BCM, Smart Key Control Module
WIPER FRT 2
10A
BCM, Multifunction Switch, PCB Block (Front Wiper High Relay)
HEATED STEERING
15A
Clock Spring (Steering Wheel Heated)
A/CON
7.5A
A/C Control Module, Heater Assembly (Cluster Ionizer)
HEATED MIRROR
10A
A/C Control Module, Driver/Passenger Power Outside Mirror, Rear Defogger
TAIL GATE OPEN
15A
Tail Gate Open Relay
S/HEATER FRT
20A
Front Seat Warmer Module, Driver Air Ventilation Seat Control Module
DR LOCK
20A
Door Lock Relay, Door Unlock Relay, Two Turn Unlock Relay
A/BAG IND
7.5A
Instrument Cluster
AIR BAG
15A
SRS Control Module
MODULE 4
10A
Electro Chromic Mirror, Front Seat Warmer Module, Driver Air Ventilation Seat Control Module
STOP LAMP
15A
Stop Signal Electronic Module
MODULE 7
10A
Sport Mode Switch, ICM Relay Box
S/HEATER RR
20A
Rear Seat Warmer Module
P/WINDOW RH
25A
Power Window RH Relay
P/WINDOW LH
25A
Power Window LH Relay, Driver Safety Power Window Module
Maintenance
54
7
Fuse Name
Fuse rating
Circuit Protected
MODULE 1
10A
BCM
IBAU
10A
Integrated Brake Actuation Unit
MODULE 2
10A
Tire Pressure Monitoring Module, Crash Pad Switch, Center Fascia Switch, Electronic Parking Brake
Module, Stop Lamp Switch, Rear Parking Assist Sensor RH/LH (IN/OUT), Front Parking Assit Sensor
LH/RH (OUT/IN)
MODULE 3
10A
ATM Lever Indicator, Multipurpose Check Connector, PCB Block (IG3 #4 Relay)
PDM 3
7.5A
Smart Key Control Module
IOD 2
15A
A/V & Navigation Head Unit
IOD 3
7.5A
ICM Relay Box (Outside Mirror Folding Relay, Outside Mirror Unfolding Relay)
CLUSTER
10A
Instrument Cluster
IG1
15A
EPCU
IOD 4
7.5A
Instrument Cluster, Tire Pressure Monitoring Module, Data Link Connector, Multipurpose Check Connector,
A/C Control Module, BCM
FOG LAMP REAR
10A
Rear Fog Lamp Control Block
SUNROOF 2
20A
SUNROOF_MOTOR (POWER)
SUNROOF 1
20A
SUNROOF_MOTOR (POWER)
MDPS
7.5A
MDPS Unit
START
7.5A
Transaxle Range Switch
IOD 1
7.5A
Overhead Console Lamp, Vanity Lamp LH/RH, Room Lamp, Glove Box Lamp, Luggage Lamp
PDM 2
7.5A
Smart Key Control Module
PDM 1
20A
Smart Key Control Module
BRAKE SWITCH
10A
Smart Key Control Module, Stop Lamp Switch
7 55
Maintenance
Motor compartment fuse panel
OPSE074012
OPSE074027L
Maintenance
56
7
Fuse Name
Fuse rating
Circuit Protected
MDPS
80A
MDPS Unit
ALT
150A
Alternator
B+1
50A
Smart Junction Block (Fuse - (S/HEATER FRT, TAIL GATE OPEN, DR LOCK, P/WINDOW LH, P/WINDOW
RH, MODULE 7))
B+2
50A
Smart Junction Block (Fuse - (STOP LAMP) Arisu-LT2)
B+3
50A
Smart Junction Block (Fuse - (PDM 1, PDM 2, BRAKE SWITCH, Leak Current Autocut Device) IPS1,
Arisu-LT1)
IG2
40A
PCB Block (Button Start (IG2) Relay)
POWER OUTLET
20A
Power Outlet Relay
OBC
10A
OBC Unit, Rear Heated Relay
BMS
10A
BMS Control Module
EPCU
20A
EPCU
CHARGER 2
10A
Normal Charge Port Lmap
C/FAN
40A
COOLING FAN 1 Relay, COOLING FAN 2 Relay
RR HTD
40A
Rear Heated Relay
IBAU 2
30A
Integrated Brake Actuation Unit
IBAU 1
40A
Integrated Brake Actuation Unit
7 57
Maintenance
Fuse Name
Fuse rating
Circuit Protected
IG1
40A
Button Start (ACC) Relay, Button Start (IG1) Relay
BLOWER
40A
Blower Relay
IG3 1
30A
IG3 #1/#2/#3/#4/#5 Relay
EPB 1
30A
Electronic Parking Brake Module
EPB 2
30A
Electronic Parking Brake Module
IG3 2
10A
Blower Relay, A/C Control Module, A/C Compressor, E/R Junction Block (Cooling Fan 1/2 Relay), Heater
Assembly (PTC Heater)
CHARGER 1
10A
OBC Unit, BMS Control Module
EWP
10A
Electronic Water Pump
IG3 3
15A
EPCU, Transaxle Range Switch, A/V & Navigation Head Unit, Instrument Cluster
HORN
15A
Horn Relay
B/UP LAMP
10A
Transaxle Range Switch, EPCU
BATTERY C/FAN
25A
Battery C/FAN Relay
No.
Relay Name
Type
E41
Power Outlet Relay
PLUG MICRO
E42
C/FAN 1 Relay
PLUG MICRO
E43
RR HTD Relay
PLUG MICRO
E44
C/FAN 2 Relay
PLUG MINI
Maintenance
58
7
Motor compartment fuse panel
(Battery terminal cover)
NOTICE
The actual fuse/relay panel label
may differ depending on equip-
ment/options.
OPSE074015L
OPSE074014
7 59
Maintenance
LIGHT BULBS
Use only the bulbs of the specified
wattage.
• If you don’t have necessary tools,
the correct bulbs and the expertise,
consult an authorized Kia dealer. In
many cases, it is difficult to replace
vehicle light bulbs because other
parts of the vehicle must be
removed before you can get to the
bulb. This is especially true if you
have to remove the headlight
assembly to get to the bulb(s).
Removing/installing the headlight
assembly can result in damage to
the vehicle.
• Do not install additional bulb or
LED. If you install that, the lamp
may not be operated properly and
fuse box or electric wiring system
may have problem.
Front light replacement
(1) Headlight (High)
(2) Headlight (Low)
(3) Front position light/
Daytime running light
(if equipped)
(4) Front turn signal
(5) Front side marker light
(6) Front fog light (if equipped)
WARNING
-
Lights
Prior to working on the light,
firmly apply the parking brake,
ensure that the ignition switch
is turned to the LOCK position
and turn off the lights to avoid
sudden movement of the vehi-
cle and burning your fingers or
receiving an electric shock.
CAUTION
- Light
replacement
Be sure to replace the burned-
out bulb with one of the same
wattage rating.
Otherwise,
it
may cause damage to the fuse
or electric wiring system.
OPS073020