Kia Rondo - 2017 Fuse Box Diagram

Kia Rondo - 2017 Fuse Box Diagram

3 57
Safety features of your vehicle
Occupant Detection System
(ODS)
Your vehicle is equipped with an
occupant detection system in the
front passenger's seat.
WARNING
• If an air bag deploys, there
may be a loud noise followed
by a fine dust released in the
vehicle.
These conditions are
normal and are not hazardous
- the air bags are packed in
this fine powder.
The dust
generated during air bag
deployment may cause skin
or eye irritation as well as
aggravate asthma for some
persons.
Always wash all
exposed skin areas thorough-
ly with cold water and a mild
soap after an accident in
which the air bags were
deployed.
(Continued)
(Continued)
• The SRS can function only
when the ignition switch is in
the ON position. If the SRS air
bag warning light does not illu-
minate,
or
continuously
remains on after illuminating
for about 6 seconds when the
ignition switch is turned to the
ON position,
or after the
engine is started, comes on
while driving, the SRS is not
working
properly.
If
this
occurs,
have your vehicle
immediately inspected by an
authorized Kia dealer.
• Before you replace a fuse or
disconnect a battery terminal,
turn the ignition switch to the
LOCK position and remove the
ignition switch. Never remove
or replace the air bag related
fuse(s)
when
the
ignition
switch is in the ON position.
Failure to observe this warning
will cause the SRS air bag
warning light to illuminate.
ORP033082C
ORP033082N
Type A
Type B
Features of your vehicle
34
4
When the power window lock
switch is pressed :
- The driver's master control can
operate all the power windows.
- The front passenger's control can
operate the front passenger's
power window.
- The rear passenger's control can-
not operate the rear passenger's
power window.
CAUTION
• To prevent possible damage
to the power window system,
do not open or close two win-
dows or more at the same
time. This will also ensure the
longevity of the fuse.
• Never try to operate the main
switch on the driver's door
and the individual door win-
dow switch in the opposite
directions at the same time. If
this is done, the window will
stop and cannot be opened or
closed.
WARNING -
Windows
• Never leave the keys in your
vehicle with unsupervised
children, when the engine is
running.
• NEVER leave any child unat-
tended in the vehicle. Even
very young children may inad-
vertently cause the vehicle to
move, entangle themselves in
the windows, or otherwise
injure themselves or others.
Always double check to make
sure all arms, hands, head
and other obstructions are
safely out of the way before
closing a window.
• Do not allow children to play
with the power windows. Keep
the driver’s door power win-
dow lock button in the LOCK
position (pressed). Serious
injury can result from uninten-
tional window operation by
the child.
• Do not extend heads or any
limbs outside the window
while the vehicle is in motion.
4 65
Features of your vehicle
Service Mode
Service Interval
Service in
It calculates and displays when you
need a scheduled maintenance
service (mileage or days).
If the remaining mileage or time
reaches 1,500 km. (900 mi) or 30
days, "Service in" message is dis-
played for several seconds each time
you set the ignition switch or Engine
Start/Stop Button to the ON position.
Service required
If you do not have your vehicle serv-
iced according to the already inputted
service interval, “Service required”
message is displayed for several sec-
onds each time you set the ignition
switch or Engine Start/Stop Button to
the ON position (The mileage and
time changes to "---").
To reset the service interval to the
mileage and days you inputted before:
- Press the RESET button
for
more than 1 second.
Service in OFF
If the service interval is not set,
“Service in OFF” message is dis-
played on the LCD display.
NOTICE
If any of the following conditions
occurs, the mileage and days may be
incorrect.
-
The battery cable is disconnected.
-
The fuse switch is turned off.
-
The battery is discharged.
4 71
Features of your vehicle
Key not detected
(for smart key system)
• This warning message illuminates
if the smart key is not detected
when
you
press
the
Engine
Start/Stop Button.
Press start button again
(for smart key system)
• This warning message illuminates
if you can not operate the Engine
Start/Stop Button when there is a
problem with the Engine Start/Stop
Button system.
• It means that you could start the
engine by pressing the Engine
Start/ Stop Button once more.
If the warning illuminates each time
you press the Engine Start/Stop
Button, have your vehicle inspected
by an authorized Kia dealer.
Press start button with smart key
(for smart key system)
• This warning message illuminates
if you press the Engine Start/Stop
Button while the warning message
“Key not detected” is illuminating.
At this time, the immobilizer indica-
tor light blinks.
Check fuse "BRAKE SWITCH"
(for smart key system and auto-
matic transaxle)
• This warning message illuminates
if the brake switch fuse is discon-
nected.
• It means that you should replace
the fuse with a new one. If that is
not possible, you can start the
engine by pressing the Engine
Start/Stop Button for 10 seconds in
the ACC position.
4 73
Features of your vehicle
Liftgate Open
It means that the liftgate is open.
Sunroof Open (if equipped)
• The warning message illuminates
if you turn off the engine and then
open the driver's door when the
sunroof is open.
Low Washer Fluid
• This warning message illuminates
on the service reminder mode if
the washer fluid level in the reser-
voir is nearly empty.
• It means that you should refill the
washer fluid.
Turn on "FUSE SWITCH"
• This warning message illuminates
if the fuse switch on the fuse box is
OFF.
• It means that you should turn the
fuse switch on.
For more details, refer to “Fuses” in
chapter 8.
ORP042084
ORP046323L
Type A
Type B
ORP042085
ORP046316L
Type A
Type B
6 13
Driving your vehicle
NOTICE
If the battery is weak or the smart
key does not work correctly, you
can start the engine by pressing
the engine start/stop button with
the smart key.
The side with the lock button
should
contact
the
engine
start/stop button directly.
When
you
press
the
engine
start/stop button directly with the
smart key, the smart key should
contact the button at a right angle.
(Continued)
(Continued)
When the stop lamp fuse is blown,
you can't start the engine normal-
ly. Replace the fuse with a new
one. If it is not possible, you can
start the engine by pressing the
ENGINE START/STOP
button
for 10 seconds
while it is in the
ACC position. The engine can
start without depressing the brake
pedal. But for your safety always
depress the brake pedal before
starting the engine.
CAUTION
Do not press the ENGINE
START/ STOP button for more
than 10 seconds except when
the stop lamp fuse is blown.
ORP052003
8 3
Maintenance
ENGINE COMPARTMENT
ORP072002
1. Engine oil dipstick
2. Engine oil filler cap
3. Engine coolant reservoir
4. Radiator cap
5. Brake fluid reservoir
6. Windshield washer fluid reservoir
7. Air cleaner
8. Positive battery terminal
9. Negative battery terminal
10. Fuse box
NU 2.0L GDI
The actual engine room in the vehicle may differ from the illustration.
Maintenance
66
8
FUSES
A vehicle’s electrical system is pro-
tected from electrical overload dam-
age by fuses.
This vehicle has 3 (or 4) fuse panels,
one located in the driver’s side panel
bolster, others in the engine com-
partment near the battery.
If any of your vehicle’s lights, acces-
sories, or controls do not work, check
the appropriate circuit fuse. If a fuse
has blown, the element inside the
fuse will be melted.
If the electrical system does not
work, first check the driver’s side
fuse panel.
Always replace a blown fuse with
one of the same rating.
Before replacing a blown fuse, dis-
connect the negative battery cable.
If the replacement fuse blows, this
indicates an electrical problem. Avoid
using the system involved and imme-
diately consult an authorized Kia
dealer.
Three kinds of fuses are used: blade
type for lower amperage rating, car-
tridge type, and multi fuse for higher
amperage ratings.
WARNING
- Fuse replace-
ment
Never replace a fuse with any-
thing but another fuse of the
same rating.
• A higher capacity fuse could
cause damage and possibly a
fire.
• Never install a wire or alu-
minum foil instead of the
proper fuse - even as a tem-
porary repair. It may cause
extensive wiring damage and
a possible fire.
• Do not arbitrarily modify or
add-on electric wiring of the
vehicle.
Normal
Normal
Blade type
Cartridge type
Multi fuse type
Blown
Blown
Normal
Blown
ORB072110/ODM072020
Normal
Blown
Battery fuse terminal
8 67
Maintenance
NOTICE
The actual fuse/relay panel label
may differ depending on equip-
ment/options.
CAUTION
Do not use a screwdriver or any
other metal object to remove
fuses because it may cause a
short circuit and damage the
system.
CAUTION -
Fuse
Replacement
Do not input any other objects
except fuses or relays into
fuse/relay terminals such as a
driver or wiring. It may cause
contact failure and system mal-
function.
WARNING
- Electrical Fire
• When replacing a blown fuse
or relay with a new one, make
sure the new fuse or relay fits
tightly into the clips The
incomplete fastening fuse or
relay may cause the vehicle
wiring and electric systems
damage and a possible fire.
• Do not remove fuses, relays
and terminals fastened with
bolts or nuts.
The fuses,
relays and terminals may be
fastened incompletely, and it
may cause a possible fire. If
fuses, relays and terminals
fastened with bolts or nuts are
blown, we recommend that
you consult with an author-
ized Kia dealer.
Maintenance
68
8
Instrument panel fuse replacement
1. Turn the ignition switch and all
other switches off.
2. Open the fuse panel cover.
3. Pull the suspected fuse straight
out. Use the removal tool provided
in the engine compartment fuse
panel.
4. Check the removed fuse; replace it
if it is blown.
5. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips.
If it fits loosely, consult an authorized
Kia dealer.
If you do not have a spare, use a
fuse of the same rating from a circuit
you may not need for operating the
vehicle, such as the cigar lighter
fuse.
If the headlights or other electrical
components do not work and the
fuses are OK, check the fuse block in
the engine compartment. If a fuse is
blown, it must be replaced.
ORP072014
ORP072015
8 69
Maintenance
Fuse switch
Always, put the fuse switch at the ON
position.
If you move the switch to the OFF
position, some items such as audio
and digital clock must be reset and
transmitter (or smart key) may not
work properly.
Engine compartment panel fuse
replacement
1. Turn the ignition switch and all
other switches off.
2. Remove the fuse box cover by
pressing the tap and pulling up the
cover. When the blade type fuse is
disconnected, remove it by using
the clip designed for changing fuses
located in the engine room fuse
box. Upon removal, securely insert
reserve fuse of equal quantity.
ORP072016
CAUTION
Always place the fuse switch in
the ON position while driving
the vehicle.
ORP072017
Maintenance
70
8
3. Check the removed fuse; replace it
if it is blown. To remove or insert
the fuse, use the fuse puller in the
engine compartment fuse panel.
4. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips. If it fits loosely, consult
an authorized Kia dealer.
Main fuse
If the main fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery
cable.
3. Remove the nuts shown in the pic-
ture above.
4. Replace the fuse with a new one
of the same rating.
5. Reinstall in the reverse order of
removal.
CAUTION
- Fuse panel
covers
After checking the fuse panel in
the
engine
compartment,
securely install the fuse panel
cover. If not, electrical failures
may occur from water contact.
CAUTION
Visually inspect the battery cap
to ensure it is securely closed. If
the battery cap is not securely
closed, moisture may enter the
system and damage the electri-
cal components.
OGD071020
8 71
Maintenance
Multi fuse
If the multi fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery
cable.
3. Remove the fuse panel on the
right side in the engine compart-
ment.
4. Remove the nuts shown in the pic-
ture above.
5. Replace the fuse with a new one
of the same rating.
6. Reinstall in the reverse order of
removal.
If the multi fuse is blown, consult an
authorized Kia dealer.
OJD072018
Maintenance
72
8
Instrument panel fuse panel
NOTICE
Not all fuse panel descriptions in
this manual may be applicable to
your vehicle. It is accurate at the
time of printing. When you inspect
the fuse panel in your vehicle, refer
to the fuse panel label.
NOTICE
The actual fuse/relay panel label
may differ depending on equip-
ment/options.
ORP072019
ORP076085N
Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing fuse/relay name and capacity.
8 73
Maintenance
Engine compartment fuse panel
NOTICE
The actual fuse/relay panel label
may differ depending on equip-
ment/options.
OGD071023
ORP076086N
Maintenance
74
8
Instrument panel (Driver’s side fuse panel)
No.
Fuse rating
Description
Protected component
1
10A
PDM 2
Start/Stop Button Switch, Immobilizer Module
2
15A
MULTI MEDIA
DC-DC Converter (Audio), A/V & Navigation Head Unit, Audio
3
7.5A
MODULE 3
Seat Warmer Control Module, Rear Seat Warmer Module, Passenger Seat Warmer Module, DC-DC
Converter (AMP), Auto Head Lamp Leveling Device Module, Rain Sensor, Head Lamp Leveling Device
Actuator LH/RH, A/C Control Module, Electro Chromic Mirror, Head Lamp Leveling Device Switch, A/V
Navigation Head Unit
4
7.5A
CLUSTER
Instrument Cluster, DC-DC Converter (Audio)
5
7.5A
MDPS
MDPS Unit
6
7.5A
START
ICM Relay Box (B/Alarm Relay), Ignition Lock Switch
[A/T - Transaxle Range Switch], [M/T - E/R Junction Block
(RLY. 10), ECM/PCM, Smart Key Control Module]
7
10A
INTERIOR
LAMP
Driver/Passenger Power Outside Mirror, Driver/Passenger Foot Lamp, Ignition Key ILL. & Door Warning
Switch, Overhead Console Lamp, Room Lamp, Vanity Lamp LH/RH, Rear Personal Lamp LH/RH,
Luggage Lamp, Portable Lamp
8
20A
PDM
Smart Key Control Module
9
7.5A
MEMORY 2
RF Receiver
10
10A
ECU
Smart Key Control Module, Immobilizer Module,
Vehicle Speed Sensor, ECM/PCM, Air Flow Sensor (D4FD), Glow Relay Unit
11
10A
ABS
ABS/ESC Control Module
8 75
Maintenance
No.
Fuse rating
Description
Protected component
12
15A
TCU
TCM (D4FD), Transaxle Range Switch (A/T, DCT), E/R Junction Block (Fuse - F27) (M/T)
13
7.5A
MODULE 4
BCM
14
7.5A
A/CON SW
A/C Control Module
15
10A
MEMORY 1
Instrument Cluster, Auto Light & Photo Sensor, Tire Pressure Monitoring Module, Ultrasonic Instrusion
Protection Sensor, A/C Control Module, Data Link Connector, Siren Control Module, Clock, BCM
16
7.5A
MODULE 1
Smart Parking Assist Control Module, Stop Lamp Switch, Tire Pressure Monitoring Module, Clutch Sensor
(M/T), Front Parking Assist Sensor (Center)/(Side) LH/RH, Front Parking Assist Sensor (In)/(Out) LH/RH,
Rear Parking Assist Sensor Center LH/RH, Crash Pad Switch, Rear Parking Assist Sensor (In)/(Out)
LH/RH, Sport Mode Switch, Parking Assist Buzzer, Multipurpose Check Connector, Electric Parking Brake
Module, Lane Departure Warning Module, Blind Spot Detection Radar LH/RH
17
20A
POWER
OUTLET 1
Rear Power Outlet, Cigarette Lighter, Front Power Outlet
18
10A
MODULE 6
A/V & Navigation Head Unit, DC-DC Converter (Audio/AMP), Audio, Clock, Smart Key Control Module,
BCM, E/R Junction Block (RLY. 7), AMP, Power Outside Mirror Switch
19
15A
A/BAG
SBR Control Module, Seat Belt Reminder IND.,Instrument Cluster Door Lock & PAB On/Off IND., SRS
Control Module, A/C Control Module
20
25A
P/WDW LH
Rear Safety Power Window Module LH, Driver/Passenger Safety Power Window Module, Power Window
LH Relay
21
10A
HTD MIRR
A/C Control Module, ECM/PCM, Driver/Passenger Power Outside Mirror
22
7.5A
MODULE 5
Portable Lamp, Rear Seat Warmer Module, Panorama Sunroof Assembly, Driver/Passenger CCS Control
Module, Seat Warmer Control Module, Passenger Seat Warmer Module, E/R Junction Block (RLY. 8)
23
7.5A
MODULE 7
BCM, Smart Key Control Module
Maintenance
76
8
No.
Fuse rating
Description
Protected component
24
15A
HTD STRG
Steering Wheel Heater
25
15A
S/HEATER RR
Rear Seat Warmer Module
26
25A
AMP
DC-DC Converter (AMP), AMP
27
20A
SUNROOF
Panorama Sunroof Assembly
28
20A
S/HEATER
FRT
Driver/Passenger CCS Control Module, Seat Warmer Control Module, Passenger Seat Warmer Module
29
7.5A
MODULE 2
ICM Relay Box (Turn Signal Lamp Sound Relay, Folding/Unfolding Relay), Key Solenoid, Sport Mode
Switch, Console Switch LH/RH, Rear Power Window Switch LH/RH
30
7.5A
A/CON
Diesel Block (RLY. 2, RLY. 3), E/R Junction Block (RLY. 2), A/C Control Module, Cluster Ionizer
31
15A
WIPER
Rear Wiper Motor, ICM Relay Box (Rear Wiper Relay), Multifunction Switch
32
25A
P/WDW RH
Rear Safety Power Window Module RH, Driver/Passenger Safety Power Window Module, Power Window
RH Relay
33
30A
P/SEAT DRV
Driver Seat Manual Switch
34
10A
FOG LAMP
RR
ICM Relay Box (Rear Fog Lamp Relay)
35
20A
DR LOCK
Tail Gate Open Relay, Door Lock/Unlock Relay, ICM Relay Box (Dead Lock Relay)
8 77
Maintenance
Fuse
Fuse rating
Description
Protected component
MULTI
FUSE
80A
MDPS
MDPS Unit
60A
B+1
Smart Junction Block (IPS 1, IPS 2, IPS 3, IPS 4, Fuse - F2/F9/F22/F29/F36)
40A
IG2
RLY. 10 (Start Relay), Ignition Switch (W/O Button Start), RLY. 3 (PDM 3 (IG2) Relay, With Button Start)
40A
ABS 1
ABS/ESC Control Module
40A
RR HTD
RLY. 6 (Rear Defogger Relay)
40A
BLOWER
RLY. 2 (Blower Relay)
40A
ABS 2
ABS/ESC Control Module, Multipurpose Check Connector
60A
B+2
Smart Junction Block (IPS 5, IPS 6, IPS 7, IPS 8, Fuse - F31/F37/F38)
FUSE
50A
B+4
E/R Junction Block (Fuse - F29/F30/F31)
30A
EPB 1
Electric Parking Brake Module
50A
C/FAN
RLY. 1 (C/Fan 1 Relay), RLY. 5 (C/Fan 2 Relay)
30A
EPB 2
Electric Parking Brake Module
Engine compartment main fuse panel
Maintenance
78
8
Fuse
Fuse rating
Description
Protected component
FUSE
20A
H/LP WASHER
RLY. 8 (Head Lamp Washer Relay)
10A
BRAKE SWITCH
Stop Lamp Switch, Smart Key Control Module
30A
POWER OUTLET 2
RLY. 7 (Power Outlet Relay)
15A
FUEL PUMP
RLY. 12 (Fuel Pump Relay)
15A
DEICER
RLY. 4 (Deicer Relay)
15A
STOP LAMP
Stop Signal Electronic Module
50A
B+3
Smart Junction Block (Leak Current Autocut Device, Fuse - F30/F32/F33/F39)
40A
IG1
RLY. 9 (PDM 1 (ACC) Relay), RLY. 11 (PDM 2 (IG 1) Relay), Ignition Switch
40A
ECU 5
EMS Block (Fuse - F32/F33/F34, Engine Control Relay)
10A
B/UP LP
MT - Back-Up Lamp Switch,
A/T - Rear Combination Lamp (In) LH/RH, Electro Chromic Mirror, A/V & Navigation Head Unit,
Audio, Instrument Cluster
25A
WIPER (LH)
Front Wiper Motor LH
25A
WIPER (RH)
Front Wiper Motor RH
15A
ECU 4
ECM/PCM
8 79
Maintenance
Fuse
Fuse rating
Description
Protected component
FUSE
15A
HORN
Horn Relay
15A
ECU 3
PCM (A/T), ECM (M/T)
10A
B/ALARM
B/Alarm Horn Relay, Horn Relay
10A
INJECTOR
G4NA : Injector #1/#2/#3/#4
10A
ECU 2
G4FD : PCM (A/T), ECM (M/T)
G4NC : PCM (A/T), ECM (M/T)
20A
IGN COIL 1
Ignition Coil #1/#2/#3/#4, Condenser
10A
SENSOR 2
G4FD : Oil Control Valve #1/ #2, Oil Level Sensor, E/R Junction Block (RLY. 1, RLY. 5)
G4NA/G4NC : Oil Control Valve #1/ #2, Camshaft Position Sensor (Intake/Exhaust),
Oil Level Sensor (G4NC), E/R Junction Block (RLY. 1, RLY. 5)
20A
ECU 1
PCM (A/T), ECM (M/T)
10A
SENSOR 1
Oxygen Sensor (Up/Down), Variable Intake Solenoid Valve, Purge Control Solenoid Valve
8 81
Maintenance
LIGHT BULBS
Use only the bulbs of the specified
wattage.
NOTICE
After driving in heavy rain or wash-
ing the vehicle, headlight and tail-
light lenses could appear foggy. This
condition is caused by the tempera-
ture difference between the lamp
inside and outside.
This is similar to
the condensation on your windows
inside your vehicle during
rain and
does not indicate a problem with
your vehicle.
If the water leaks into
the lamp bulb circuitry, we recom-
mend that the system be checked by
an authorized Kia dealer.
WARNING
- Working on
the lights
Prior to working on the light,
firmly apply the parking brake,
ensure that the ignition switch
is turned to the “LOCK”position
(smart key: turn off the engine)
and turn off the lights to avoid
sudden movement of the vehi-
cle and burning your fingers or
getting an electric shock.
CAUTION
Be sure to replace the burned-
out bulb with one of the same
wattage rating.
Otherwise,
it
may cause damage to the fuse
or electric wiring system.
CAUTION
If you do not have necessary
tools, the correct bulbs and the
expertise, we recommend that
you consult an authorized Kia
dealer. In many cases, it is diffi-
cult to replace vehicle light
bulbs because other parts of the
vehicle must be removed before
you can get to the bulb. This is
especially true if you have to
remove the headlight assembly
to get to the bulb(s).
Removing/installing the head-
light assembly can result in
damage to the vehicle.