Kia Forte - 2017 Fuse Box Diagram

Kia Forte - 2017 Fuse Box Diagram

3 41
Safety features of your vehicle
NOTICE
Before you replace a fuse or discon-
nect a battery terminal, turn the igni-
tion switch to the LOCK
position
and remove the ignition key. Never
remove or replace the air bag related
fuse(s) when the ignition switch is in
the ON position. Failure to heed this
warning will cause the SRS air bag
warning light to illuminate.
Occupant detection system
Your vehicle is equipped with an occu-
pant detection system in the front
passenger's seat.
The occupant detection system is
designed to detect the presence of a
properly-seated front passenger and
determine if the passenger's front air
bag should be enabled (may inflate)
or not.The driver's front air bag is not
affected or controlled by the occu-
pant detection system.
Main components of occupant
detection system
• A detection device located within
the front passenger seat track.
• Electronic system to determine
whether passenger air bag sys-
tems
should be activated or deac-
tivated.
• An indicator light located on the
instrument panel which illuminates
the words PASSENGER AIR BAG
“OFF” indicating the front passen-
ger air bag system is deactivated.
The instrument panel air bag warn-
ing light is interconnected with the
occupant detection system.
OYD036104N
Features of your vehicle
34
4
Power window lock button
(if equipped)
The driver can disable the power
window switches on the rear passen-
gers' doors by pressing the power
window lock switch to the lock posi-
tion (pressed).
When the power window lock
switch is pressed:
• The driver's master control can
operate all the power windows.
• The front passenger's control
can operate the front passen-
ger's power window.
• The rear passenger's control
cannot operate the rear passen-
ger's power window.
If the window cannot be close
because it is blocked by objects,
remove the objects and close the
window.
Always double check to make sure
all arms, hands, head and other
obstructions are safely out of the way
before closing a window.
If the power window switch is pulled
up continuously again within 5 sec-
onds after the window is lowered by
the automatic window reversal fea-
ture, the automatic window reversal
will not operate.
CAUTION
- Opening/clos-
ing Window
To prevent possible damage to
the power window system, do
not open or close two windows
or more at the same time. This
will also ensure the longevity of
the fuse.
WARNING -
Power
windows
Do not allow children to play
with the power windows. Keep
the driver’s door power window
lock switch in the LOCK posi-
tion (pressed).
WARNING
Always check for obstructions
before raising any window to
avoid injuries or vehicle dam-
age. If an object less than 4 mm
(0.16 in.) in diameter is caught
between the window glass and
the upper window channel, the
automatic reverse window may
not detect the resistance and
will not stop and reverse direc-
tion.
OYDM046402N
4 43
Features of your vehicle
Sunshade
When opening the sunroof, the sun-
shade will also open. Once the sun-
roof is closed, the sunshade can be
manually closed.
Resetting the sunroof
Whenever the vehicle battery is dis-
connected or discharged, or related
fuse is blown, you must reset your
sunroof system as follows:
1. Turn the ignition switch to the ON
position or start the engine. We
recommend resetting the sunroof
while the engine is running.
2. Push and release the control lever
forward in the direction of close
repeatedly until the sunroof does
not move. Sunroof will stop at the
close position Glass will tilt up then
will move up and down slightly.
3. Release the control lever when
sunroof does not move.
4. Glass will tilt up then will move up
and down slightly.
5. Within 5 seconds, push the sun-
roof control lever forward in the
direction of close until the sunroof
operates as follows:
Tilt down
Slide Open
Slide Close.
NOTICE
Do not release the lever until the
operation is completed.
If you release the lever during oper-
ation, try again from step 2.
6. Release the sunroof control lever
after all operation has completed.
(The sunroof system has been
reset.)
For more detailed information,
contact
an authorized Kia dealer.
NOTICE
If the sunroof is not reset when the
vehicle battery is disconnected or
discharged, or related fuse is blown,
the sunroof may operate improperly.
OBK049019
4 71
Features of your vehicle
Service in OFF
If the service interval is not set,
“Service in OFF” message is dis-
played on the LCD window.
NOTICE
If any of the following conditions
occurs, the mileage and days may be
incorrect.
-
The battery cable is disconnected.
-
The fuse switch is turned off.
-
The battery is discharged.
User Settings Mode
On this mode, you can change set-
ting of the doors, lamps, and so on.
Driving Assist (if equipped)
• Lane
Keeping
Assist
System
(LKAS, if equipped) : To adjust the
sensitivity of the Lane Keeping
Assist System.
- Lane
Departure/Standard
LKA/Activ LKA For more informa-
tion, refer to the “Lane Keep Assist
System” in chap ter 5.
• Autonomous Emergency Braking
system (AEB,if equipped) : To acti-
vate or deactivate the Autonomous
Emergency Braking (AEB).
For more information, refer to
“Autonomous Emergency Braking
(AEB)” in chapter 5.
OYD046218L
OYD046210L
WARNING
Do not adjust the User Setting
while driving.You may lose your
steering control and cause
severe personal injury or acci-
dents.
Features of your vehicle
76
4
Turn on FUSE SWITCH (if equipped)
• This warning message illuminates
if the fuse switch under the steer-
ing wheel is OFF.
• It means that you should turn the
fuse switch on.
For more details, refer to “Fuses” in
chapter 7.
Engine has overheated
This warning message illuminates
when the engine coolant tempera-
ture is above 120°C (248°F). This
means that the engine is overheated
and may be damaged.
If your vehicle is overheated, refer to
“Overheating” in chapter 6.
Shift to P (for smart key system and
automatic transaxle)
This warning message illuminates if
you try to turn off the engine without
the shift lever in P (Park) position.
At this time, the Engine Start/Stop
Button turns to the ACC position (If
you press the Engine Start/Stop
Button once more, it will turn to the
ON position).
Low Key Battery
(for smart key system)
• This warning message illuminates
if the battery of the smart key is
discharged
when
the
Engine
Start/Stop Button changes to the
OFF position.
Press START button while turn steer-
ing (for smart key system)
• This warning message illuminates
if the steering wheel does not
unlock normally when the Engine
Start/Stop Button is pressed.
It means that you should press the
Engine Start/Stop Button while
turning the steering wheel right
and left.
Steering wheel unlocked
(for smart key system)
• This warning message illuminates
if the steering wheel does not lock
when the Engine Start/Stop Button
changes to the OFF position.
Features of your vehicle
78
4
Press START button with smart key
(for smart key system)
• This warning message illuminates
if you press the Engine Start/Stop
Button while the warning message
“Key not detected” is illuminating.
At this time, the immobilizer indica-
tor light blinks.
Check fuse “BRAKE SWITCH”
(for smart key system and automatic
transaxle/transmission)
• This warning message illuminates
if the brake switch fuse is discon-
nected.
• It means that you should replace
the fuse with a new one. If that is
not possible, you can start the
engine by pressing the Engine
Start/Stop Button for 10 seconds in
the ACC position.
Shift to P or N to start engine
(for smart key system and automatic
transaxle)
• This warning message illuminates
if you try to start the engine with
the shift lever not in the P (Park) or
N (Neutral) position.
NOTICE
You can start the engine with the
shift lever in the N (Neutral) position.
But, for your safety, we recommend
that you start the engine with the
shift lever in the P (Park) position.
Low Washer Fluid (if equipped)
• This warning message illuminates
on the service reminder mode if
the washer fluid level in the reser-
voir is nearly empty.
• It means that you should refill the
washer fluid.
Low Fuel
• This warning message illuminates
if the fuel tank is nearly empty.
- When the low fuel level warning
light is illuminates.
Add fuel as soon as possible.
4 147
Features of your vehicle
LCD monitor (clock)
Whenever the battery terminals or
related fuses are disconnected, you
must reset the time.
When the ignition switch is in the
ACC or ON position, the clock but-
tons operate as follows:
• HOUR (1) :
Pressing the 'H" button will advance
the time display by one hour.
• MINUTE (2) :
Pressing the "M" button will advance
the time display by one minute.
• Display conversion:
- Clock
To change the 12 hour format to
the 24 hour format, press the "H"
and “M” button at the same time for
more than 4 seconds.
For example, if the time is 10:15
p.m., the display will change to
22:15.
WARNING
- Clock setting
distraction
Do not adjust the clock while
driving.You may lose your steer-
ing control and cause severe
personal injury or an accident.
OYD046323
5 13
Driving your vehicle
• If the battery is weak or the smart
key does not work correctly, you
can start the engine by pressing
the engine start/stop button with
the smart key.
When the stop lamp fuse is blown,
you can not start the engine nor-
mally. Replace the fuse with a new
one. If it is not possible, you can
start the engine by pressing the
ENGINE START/STOP button for
10 seconds while it is in the ACC
position.The engine can start with-
out depressing the brake pedal.
But for your safety always depress
the brake pedal before starting the
engine.
Do not press the ENGINE START/
STOP button for more than 10 sec-
onds except when the stop lamp fuse
is blown.
OYDDDR3006
7 3
Maintenance
ENGINE COMPARTMENT
OYDM076017/OYDM076078N
Gasoline Nu 2.0 MPI Engine
The actual engine compartment in the vehicle may differ from the illustration.
Gasoline Nu 2.0 GDI Engine
1. Engine oil dipstick
2. Engine oil filler cap
3. Engine coolant reservoir
4. Radiator cap
5. Brake/clutch* fluid reservoir
6. Windshield washer fluid reservoir
7. Air cleaner
8. Positive battery terminal
9. Negative battery terminal
10. Fuse box
* : if equipped
Maintenance
4
7
OYD076038N
Gasoline Gamma 1.6T-GDI Engine
The actual engine compartment in the vehicle may differ from the illustration.
1. Engine oil dipstick
2. Engine oil filler cap
3. Engine coolant reservoir
4. Radiator cap
5. Brake/clutch* fluid reservoir
6. Windshield washer fluid reservoir
7. Air cleaner
8. Positive battery terminal
9. Negative battery terminal
10. Fuse box
* : if equipped
7 69
Maintenance
FUSES
A vehicle's electrical system is protect-
ed from electrical overload damage by
fuses.
This vehicle has 2 fuse panels, one
located in the driver's side panel bol-
ster, others in the engine compart-
ment near the battery.
If any of your vehicle's lights, acces-
sories, or controls do not work, check
the appropriate circuit fuse. If a fuse
has blown, the element inside the fuse
will be melted.
If the electrical system does not work,
first check the driver's side fuse panel.
Always replace a blown fuse with one
of the same rating.
Before replacing a blown fuse, move
to safe place, turn off the engine and
all electric devices, and disconnect the
negative battery cable.
If the replacement fuse blows, this
indicates an electrical problem. Avoid
using the system involved and we rec-
ommend that you consult an author-
ized Kia dealer.
Four kinds of fuses are used: blade
type for lower amperage rating, car-
tridge type,
battery fuse terminal and
multi fuse type for higher amperage
ratings.
Do not arbitrarily modify or add-on
electric wiring to the vehicle.
WARNING
- Fuse replace-
ment
Never replace a fuse with any-
thing but another fuse of the
same rating.
• A higher capacity fuse could
cause damage and possibly a
fire.
Never install a wire or aluminum
foil instead of the proper fuse -
even as a temporary repair. It
may cause extensive wiring
damage and a possible fire.
CAUTION
- Fuse replace-
ment
Do not use a screwdriver or any
other metal object to remove
fuses because it may cause a
short circuit and damage the
system.
OXM073122
Normal
Normal
Blade type
Cartridge type
Multi fuse
Blown
Blown
Normal
Blown
Normal
Blown
Maintenance
70
7
NOTICE
The actual fuse/relay panel label
may differ depending on equip-
ment/options.
Instrument panel fuse replace-
ment
1. Turn the ignition switch and all
other switches off.
2. Open the fuse panel cover.
CAUTION
- Fuse replace-
ment
Do not input any other objects
except fuses or relays into
fuse/relay terminals such as a
driver or wiring. It may cause
contact failure and system mal-
function.
OYDDMC2009
WARNING
- Electrical Fire
• Always ensure replacements
fuses and relays are securely
fastened
when
installed.
Failure to do so can result in a
vehicle fire.
We recommend that you do not
remove fuses, relays and termi-
nals that are fastened with
bolts or nuts. If they are not
completely re-installed, such
looseness may cause electrical
arcing and a possible fire. If
fuses, relays and terminals fas-
tened with bolts or nuts need
replacement, consult with an
authorized Kia dealer.
7 71
Maintenance
3. Pull the suspected fuse straight
out. Use the removal tool provided
in the engine compartment fuse
panel.
4. Check the removed fuse; replace it
if it is blown.
5. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips.
If it fits loosely, consult an authorized
Kia dealer.
If you do not have a spare, use a
fuse of the same rating from a circuit
you may not need for operating the
vehicle, such as the cigarette lighter
fuse.
If the headlights or other electrical
components do not work and the
fuses are OK, check the fuse panel
in the engine compartment. If a fuse
is blown, it must be replaced.
Fuse switch
Your vehicle is equipped with a fuse
switch to prevent battery discharge if
your vehicle is parked without being
operated for prolonged periods.
Use the following procedures before
parking the vehicle for prolonged
periods.
1. Turn off the engine.
2. Turn off the headlights and tail
lights.
3. Open the driver’s side panel cover
and move the fuse switch up to the
OFF position.
OYDDMC2040
OYDDMC2010
Maintenance
72
7
NOTICE
• If the fuse switch is in the OFF
position,
the
warning
chime,
audio, clock and interior lamps,
etc., will not operate. Some items
must be reset after replacement.
Refer to “Battery” in this chapter.
Even when the fuse switch is in the
OFF position, the battery can still
be discharged by operation of the
headlights or
other
electrical
devices.
Engine compartment fuse
replacement
1.Turn the ignition switch and all
other switches off.
2.Remove the fuse panel cover by
pressing the tab and pulling the
cover up.
When the blade type fuse is dis-
connected, remove it by using the
clip designed for changing fuses
located in the engine room fuse
box. Upon removal, securely insert
reserve fuse of equal quantity.
3. Check the removed fuse; replace it
if it is blown. To remove or insert
the fuse, use the fuse puller in the
engine compartment fuse panel.
4. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips. If it fits loosely, consult
an authorized Kia dealer.
CAUTION
- Fuse panel
covers
After checking the fuse panel in
the
engine
compartment,
securely install the fuse panel
cover. If not, electrical failures
may occur from water contact.
OYDDMC2011
7 73
Maintenance
Main fuse
If the main fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery
cable.
3. Remove the nuts shown in the pic-
ture above.
4. Replace the fuse with a new one
of the same rating.
5. Reinstall in the reverse order of
removal.
Multi fuse
If the multi fuse is blown, it must be
removed as follows:
1. Remove the fuse panel in the
engine compartment.
2. Remove the nuts shown in the pic-
ture above.
3. Replace the fuse with a new one
of the same rating.
4. Reinstall in the reverse order of
removal.
OMD070022
OMD070021
CAUTION
Visually inspect the battery cap
to ensure it is securely closed. If
the battery cap is not securely
closed, moisture may enter the
system and damage the electri-
cal components.
Maintenance
74
7
Fuse/relay panel description
Inside the fuse/relay panel covers, you
can find the fuse/relay label describing
fuse/relay name and capacity.
NOTICE
Not all fuse panel descriptions in
this manual may be applicable to
your vehicle. It is accurate at the
time of printing. When you inspect
the fuse panel in your vehicle, refer
to the fuse panel label.
NOTICE
The actual fuse/relay panel label
may differ depending on equip-
ment/options.
OYDNMC5014
OYDDMC2012
7 75
Maintenance
Engine compartment fuse
panel
NOTICE
Not all fuse panel descriptions in
this manual may be applicable to
your vehicle. It is accurate at the
time of printing. When you inspect
the fuse panel in your vehicle, refer
to the fuse panel label.
OYDM076074
OYDDMC2013
Maintenance
76
7
Engine room
(Battery terminal cover)
NOTICE
Not all fuse panel descriptions in
this manual may be applicable to
your vehicle. It is accurate at the
time of printing. When you inspect
the fuse panel in your vehicle, refer
to the fuse panel label.
OYDM076075
OYDNMC2059
7 77
Maintenance
Instrument panel fuse panel
Fuse Name
Fuse rating
Circuit Protected
P/SEAT DRV
30A
Driver IMS Module, Driver Seat Manual Switch
SPARE 4
25A
-
P/WDW RH
25A
Smart Junction Block (Power Window RH Relay), Passenger Safety Power Window Module
TRUNK
10A
Smart Junction Box (Trunk Relay)
P/WDW LH
25A
Smart Junction Block (Power Window LH Relay), Driver Safety Power Window Module
DR LOCK
20A
Smart Junction Block (Door Lock Relay, Door Unlock Relay), ICM Relay Box (Two Turn Unlock Relay)
SPARE 3
20A
-
POWER OUTLET 1
20A
Cigarette Lighter & Power Outlet (Cigarette Lighter)
S/HEATER RR
20A
Rear Seat Warmer LH/RH
MODULE 8
10A
BCM, Smart Key Control Module
SPARE 2
7.5A
-
MODULE 9
15A
Driver/Passenger Smart Key Outside Handle, Driver/Passenger Power Outside Handle
MODULE 1
10A
Smart Key Control Module, BCM, Digital Clock, Audio, A/V & Navigation Head Unit, Power Outside
Mirror Switch
A/CON
7.5A
A/C Control Module, Cluster Ionizer, E/R Junction Block (Blower Relay, GSL PTC Heater Relay)
MODULE 5
7.5A
Driver/Passenger Seat Warmer Module, Driver Passenger Air Ventilation Seat Control Module, Rear
Seat Warmer LH/RH, Sunroof
HTD MIRR
10A
ECM/PCM, A/C Control Module, Driver/Passenger Power Outside Mirror
INTERIOR LAMP
7.5A
Trunk Room Lamp, Glove Box Lamp, Vanity Lamp LH/RH, Room Lamp, Overhead Console Lamp,
Ignition Key ILL. & Door Warning Switch, Luggage Lamp
MODULE 6
7.5A
Key Solenoid
PDM 2
7.5A
[With Smart Key] Smart Key Control Module [W/O Smart Key] Immobilizer Module
SUNROOF
20A
Sunroof
Maintenance
78
7
Fuse Name
Fuse rating
Circuit Protected
MODULE 2
10A
Electro Chromic Mirror, Multipurpose Check Connector, A/C Control Module, Driver CCS Switch,
Driver/Passenger Air Ventilation Seat Control Module, Driver/Passenger Seat Warmer Module, Driver
IMS Module, A/V & Navigation Head Unit, ATM Lever Indicator, Rear Seat Warmer LH/RH, Rear Power
Window Switch LH/RH, Rear Seat Warmer LH/RH, Audio, Dynamic Bending Light Module, Console
Switch LH/RH
HTD STRG
15A
Steering Wheel Heater
IG 1
20A
W/O Smart Key : E/R Junction Block (Fuse - TCU1, ECU 3, ABS 3)
WIPER FRT
25A
Wiper Motor, E/R Junction Block (Wiper Relay), Multifunction Switch (Wiper)
MULTIMEDIA 2
7.5A
-
MEMORY
7.5A
Driver IMS Module, BCM, Tire Pressure Monitoring Module, Auto Light & Photo Sensor, Instrument
Cluster, Data Link Connector, Digital Clock, A/C Control Module, Electro Chromic Mirror,
MODULE 7
10A
ICM Relay Box (Turn Signal Lamp Sound Relay, Folding Relay, Unfolding Relay)
PDM 3
7.5A
[With Smart Key] Smart Key Control Module [W/O Smart Key] Immobilizer Module
MDPS
7.5A
MDPS Unit
MODULE 3
7.5A
Instrument Cluster
START
7.5A
[With Burglar Alarm & W/O Smart Key & W/O IMMO.] ICM Relay Box (Burglar Alarm Relay)
[W/O Burglar Alarm or With Smart Key or With IMMO.] Transaxle Range Switch, Ignition Lock Switch
MULTIMEDIA 1
15A
Audio, A/V & Navigation Head Unit
BRAKE SWITCH
10A
Stop Lamp Switch, Smart Key Control Module
PDM 1
20A
Smart Key Control Module
POWER OUTLET FRT
20A
Cigarette Lighter & Power Outlet (Power Outlet)
A/BAG IND
7.5A
Instrument Cluster (Air Bag IND.)
MODULE 4
10A
Crash Pad Switch, Tire Pressure Monitoring Module, Stop Lamp Switch, Digital Clock, BCM, Blind Spot
Detection Radar LH/RH, MDPS Unit, AEB Module,
Sport Mode Switch, AEB Radar
A/BAG
15A
SRS Control Module, Weight Classification Module
7 79
Maintenance
Engine compartment fuse panel
Fuse Name
Fuse rating
Circuit Protected
MULTI FUSE
MDPS
80A
MDPS Unit
B+1
60A
Smart Junction Block (ARISU-LT IPS 1 (4CH), Fuse - MODULE6, MODULE7, MODULE9,
P/WDW LH, P/WDW RH, TRUNK)
ABS 1
40A
ESC Module
C/FAN
40A
C/Fan Relay
RR HTD
40A
RR HTD Relay
BLOWER
40A
Blower Relay
GSL PTC HEATER
60A
GSL PTC Heater Relay
B+2
60A
Smart Junction Block (ARISU-LT IPS 3 (4CH), ARISU-LT IPS 4 (4CH), IPS 5 (2CH), Fuse -
PDM 1, P/SEAT DRV BRAKE SWITCH, S/HEATER RR)
FUSE
B/UP LAMP
10A
A/T,DCT : Electro Chromic Mirror, Audio, A/V & Navigation Head Unit, Rear Combination
Lamp (In) LH/RH M/T : Back-Up Lamp Switch
TCU 1
15A
A/T : Transaxle Range Switch, DCT : Transaxle Range Switch, TCM
ABS 3
10A
ESC Module
ECU 3
10A
ECM/PCM, Vacuum Pump
A/CON SWITCH
10A
A/C Control Module, Blower Motor, Blower Relay, ECM/PCM, Blower Resistor
WIPER FRT
10A
ECM/PCM, Wiper Motor, E/R Junction Block (Wiper FRT Relay)
B+3
50A
Smart Junction Block (Leak Current Autocut Device, Fuse - PDM 2, DR LOCK, SUNROOF)
ECU 6
40A
EMS Block (Engine Control Relay, Fuse - ECU 4, A/CON, F/PUMP)
GSL PTC HEATER
50A
GSL PTC HEATER RELAY
DEICER
15A
ICM Relay Box (Front Deicer Relay)
STOP LAMP
10A
Stop Signal Electronic Module
Maintenance
80
7
Fuse Name
Fuse rating
Circuit Protected
FUSE
S/HEATER FRT
20A
Driver/Passenger Air Ventilation Seat Control Module, Driver/Passenger Seat Warmer Module
HORN
15A
Horn Relay, ICM Relay Box (Burglar Alarm Horn Relay)
ECU 5
15A
ECM/PCM
IG 2
40A
W/O Smart Key : Ignition Switch, Start 1 Relay, With Smart Key : PDM 4 (IG2) Relay, Start 1
Relay
ABS 2
40A
ESC Module
IG 1
40A
W/O Smart Key : Ignition Switch, With Smart Key : PDM 3 (IG1) Relay, PDM 2 (ACC) Relay
WIPER RR
15A
Multifunction Switch, Rear Wiper Motor, ICM Relay Box (Rear Wiper Relay), Ignition Switch,
PDM 4 (IG2) Relay
TCU 3
40A
TCM
TCU 2
20A
TCM
TCU 4
40A
TCM
7 81
Maintenance
Fuse & Relay Box( NU 2.0L MPI/ NU 2.0 GDI)
Relay NO.
Relay Name
Type
E41
RR HTD RELAY
PLUG MICRO
E42
WIPER RELAY
PLUG MICRO
E43
GSL PTC RELAY
PLUG MICRO
E44
PDM 2 (ACC) RELAY
PLUG MICRO
E45
START 1 RELAY
PLUG MICRO
E46
PDM 3 (IG1) RELAY
PLUG MICRO
E47
C/FAN RELAY
PLUG MINI
E48
HORN RELAY
PLUG MICRO
E49
PDM 4 (IG2) RELAY
PLUG MICRO
E50
BLOWER RELAY
PLUG MICRO
E52
C/FAN 2 RELAY
PLUG MICRO
Junction Block (GAMMA 1.6L T-GDI)
Relay NO.
Relay Name
Type
E41
RR HTD RELAY
PLUG MICRO
E42
WIPER RELAY
PLUG MICRO
E43
GSL PTC RELAY
PLUG MICRO
E44
PDM 2 (ACC) RELAY
PLUG MICRO
E45
START 1 RELAY
PLUG MICRO
E46
PDM 3 (IG1) RELAY
PLUG MICRO
E47
C/FAN RELAY
PLUG MINI
E48
HORN RELAY
PLUG MICRO
E49
PDM 4 (IG2) RELAY
PLUG MICRO
E50
BLOWER RELAY
PLUG MICRO
E52
C/FAN 2 RELAY
PLUG MICRO
Maintenance
82
7
EMS Block (NU 2.0L MPI)
Fuse Name
Fuse rating
Circuit Protected
F/PUMP
20A
F/Pump Relay
ECU 4
15A
PCM
A/CON
15A
A/CON COMP Relay
INJECTOR
10A
EMS Block (F/Pump Relay)
SPARE
10A
-
IGN COIL
20A
Ignition Coil #1/#2/#3/#4, EMS Block (F/PUMP Relay)
ECU 1
20A
ECM/PCM
SENSOR 2
10A
Oxygen Sensor (Up), Oxygen Sensor (Down), Variable Intake Solenoid Valve, EMS Block (A/CON
COMP Relay) Purge Control Solenoid Valve, Canister Close Valve, E/R Junction Block (C/Fan 2 Relay)
SENSOR 1
10A
Oil Control Valve #1 (Intake), Oil Control Valve #2 (Exhaust), Oil Control Valve #3 (Signal), Electronic
Thermostat
SPARE
10A
-
SPARE
15A
-
SPARE
20A
-
Relay Name
Type
ENGINE CONTROL RELAY
PCB
A/CON COMP RELAY
PLUG MICRO
F/PUMP RELAY
PLUG MICRO
7 83
Maintenance
EMS Block (NU 2.0L GDI)
Fuse Name
Fuse rating
Circuit Protected
F/PUMP
20A
F/Pump Relay
ECU 4
15A
PCM/ECM
A/CON
15A
A/CON COMP Relay
INJECTOR
10A
EMS Block (F/Pump Relay)
ECU 2
10A
PCM/ECM
IGN COIL
20A
Ignition Coil #1/#2/#3/#4, Condenser
ECU 1
20A
PCM/ECM
SENSOR 2
10A
Oxygen Sensor (Up), Oxygen Sensor (Down), Variable Intake Solenoid Valve, EMS Block (A/CON
COMP Relay)
Purge Control Solenoid Valve, Canister Close Valve, E/R Junction Block (C/Fan 2 Relay)Oil Control
Valve #1 (Intake), Oil Control Valve #2 (Exhaust)
SPARE
10A
-
SPARE
10A
-
SPARE
15A
-
SPARE
20A
-
Relay Name
Type
ENGINE CONTROL RELAY
PCB
A/CON COMP RELAY
PCB
F/PUMP RELAY
PCB
Maintenance
84
7
EMS Block GAMMA 1.6L T-GDI
Fuse Name
Fuse rating
Circuit Protected
F/PUMP
20A
F/Pump Relay
ECU 4
15A
PCM/ECM
A/CON
15A
A/CON COMP Relay
INJECTOR
10A
EMS Block (F/Pump Relay)
ECU 2
10A
PCM/ECM
IGN COIL
20A
Ignition Coil #1/#2/#3/#4, Condenser
ECU 1
20A
PCM/ECM
SENSOR 2
10A
Oxygen Sensor (Up), Oxygen Sensor (Down), Variable Intake Solenoid Valve, EMS Block (A/CON
COMP Relay)
Purge Control Solenoid Valve, Canister Close Valve, E/R Junction Block (C/Fan 2 Relay)Oil Control
Valve #1 (Intake), Oil Control Valve #2 (Exhaust)
SPARE
10A
-
SPARE
10A
-
SPARE
15A
-
SPARE
20A
-
Relay Name
Type
ENGINE CONTROL RELAY
PCB
A/CON COMP RELAY
PCB
F/PUMP RELAY
PCB
7 85
Maintenance
LIGHT BULBS
Use only the bulbs of the specified
wattage.
If you don’t have necessary tools, the
correct bulbs and the expertise, con-
sult an authorized Kia dealer. In
many cases, it is difficult to replace
vehicle light bulbs because other
parts of the vehicle must be removed
before you can get to the bulb.This is
especially true if you have to remove
the headlight assembly to get to the
bulb(s).
Removing/installing
the
headlight assembly can result in
damage to the vehicle.
Front lights replacement
(1) Headlight (High)
(2) Headlight (Low)
(3) Front turn signal light
(4) Front fog light
(5) Front position light
(6) Side marker
WARNING
- Lights
Prior to working on the light,
firmly apply the parking brake,
ensure that the ignition switch
is turned to the “LOCK”position
and turn off the lights to avoid
burning your fingers or receiv-
ing an electric shock.
CAUTION
- Light
replacement
Be sure to replace the burned-
out bulb with one of the same
wattage rating.
Otherwise,
it
may cause damage to the fuse
or electric wiring system.
OYDM076048
OYD076034L
4 Door, 5 Door
2 Door