Nissan JUKE - 2017 Fuse Box Diagram

Nissan JUKE - 2017 Fuse Box Diagram

JVC0725X
1.
Outside mirror remote control switch (P.3-22)
2.
Headlight, fog light and turn signal switch
— Headlight (P.2-40)
— Turn signal light (P.2-43)
— Fog light* (P.2-44)
3.
Paddle shifter* (P.5-16)
4.
Steering wheel
— Electric power steering (P.5-34)
— Horn (P.2-44)
— Driver’s supplemental air bag (P.1-38)
5.
Wiper and washer switch (P.2-36)
6.
Shift lever
— Continuously Variable Transmission (CVT)
(P.5-14)
— Manual Transmission (MT) (P.5-19)
7.
Fuse box cover (P.8-19)
8.
Vehicle Dynamic Control (VDC) OFF switch
(P.5-37)
9.
All-Wheel Drive (AWD) switch* (P.5-29)
10.
Tilting steering wheel lever (P.3-20)
11.
Steering-wheel-mounted controls (left side)
— Audio control (P.4-73)
— Siri
¡
Eyes Free (P.4-76)
— Bluetooth
¡
Hands-Free Phone System con-
trol (P.4-80, P.4-89)
— NISSAN
Voice
Recognition
System
(with
navigation system)* (P.4-96)
12.
Steering-wheel-mounted controls (right side)
— Cruise control switches (P.5-26)
13.
Heated seat switch* (P.2-45)
*:
if so equipped
Illustrated table of contents
0-7
COCKPIT
JVC0747X
MR16DDT ENGINE
1.
Engine oil filler cap (P.8-5)
2.
Radiator filler cap (P.8-5)
— Vehicle overheat (P.6-11)
3.
Brake and clutch* fluid reservoir (P.8-9)
4.
Air cleaner (P.8-14)
5.
Window washer fluid reservoir (P.8-9)
6.
Engine drive belt location (P.8-12)
7.
Engine oil dipstick (P.8-5)
8.
Engine coolant reservoir (P.8-5)
9.
Fuse/fusible link holder (P.8-17)
10.
Battery (P.8-10)
— Jump starting (P.6-9)
*:
for Manual Transmission (MT) models
Illustrated table of contents
0-11
ENGINE COMPARTMENT
JVC0725X
1.
Outside mirror remote control switch
2.
Headlight, fog light and turn signal switch
— Headlight
— Turn signal light
— Fog light*
3.
Paddle shifter*
4.
Steering wheel
— Electric power steering
— Horn
— Driver’s supplemental air bag
5.
Wiper and washer switch
6.
Shift lever
— Continuously Variable Transmission (CVT)
— Manual Transmission (MT)
7.
Fuse box cover
8.
Vehicle Dynamic Control (VDC) OFF switch
9.
All-Wheel Drive (AWD) switch*
10.
Tilting steering wheel lever
11.
Steering-wheel-mounted controls (left side)
— Audio control
— Siri
¡
Eyes Free
— Bluetooth
¡
Hands-Free Phone System con-
trol
— NISSAN
Voice
Recognition
System
(with
navigation system)*
12.
Steering-wheel-mounted controls (right side)
— Cruise control switches
13.
Heated seat switch*
*:
if so equipped
Instruments and controls
2-3
COCKPIT
JVI1372X
Check tire pressure warning message
The CHECK TIRE PRES (pressure) warning
message is displayed when the low tire pressure
warning light
is illuminated and low tire
pressure is detected. Check and adjust the tire
pressure
to
the
recommended
COLD
tire
pressure
shown
on
the
Tire
and
Loading
Information
label.
The
CHECK
TIRE
PRES
warning message turns off when the low tire
pressure warning light
turns off.
The low tire pressure warning light
remains
illuminated until the tires are inflated to the
recommended COLD tire pressure. The CHECK
TIRE PRES warning message is displayed each
time the ignition switch is placed in the ON
position as long as the low tire pressure warning
light
remains illuminated.
The CHECK TIRE PRES warning message can
be turned off by pushing the reset switch
*
A
.
For more information see “Low tire pressure
warning light” (P.2-18), “Tire Pressure Monitor-
ing System (TPMS)” (P.5-3), and “Wheels and
tires” (P.8-28).
Extended storage fuse warning message
The SHIP PHASE On/PUSH FUSE In warning
message
may
be
displayed
if
the
extended
storage fuse switch is not pushed in (switched
on). When this message is displayed, push in
(switch on) the extended storage fuse switch to
turn off the message. For more information, see
“Extended storage fuse switch” (P.8-20).
SIC4506
TACHOMETER
The
tachometer
indicates
engine
speed
in
revolutions per minute (RPM).
Do not rev the
engine into the red zone
*
1
.
CAUTION
When engine speed approaches the red
zone, shift to a higher gear or reduce
engine speed. Operating the engine in
the red zone may cause serious engine
damage.
Instruments and controls
2-9
2-46
Instruments and controls
The heater is controlled by a thermostat,
automatically turning the heater on and off.
The indicator light will remain on as long as
the switch is on.
When the vehicle’s interior is warmed, or
before you leave the vehicle, be sure to turn
off the switch.
SIC4525
The power outlet is located in the instrument
panel.
CAUTION
.
The
outlet
and
plug
may
be
hot
during or immediately after use.
.
Do not use with accessories that
exceed a 12 volt, 120W (10A) power
draw. Do not use double adapters or
more than one electrical accessory.
.
Use power outlet with the engine
running
to
avoid
discharging
the
vehicle battery.
.
Avoid using power outlet when the
air conditioner, headlights or rear
window defroster is on.
.
This power outlet is not designed
for use with a cigarette lighter unit.
.
Push the plug in as far as it will go.
If good contact is not made, the plug
may overheat or the internal tem-
perature fuse may open.
.
Before inserting or disconnecting a
plug, be sure the electrical acces-
sory being used is turned OFF.
.
When not in use, be sure to close
the cap. Do not allow water or any
liquid to contact the outlet.
POWER OUTLET
Apps button:
The
button
launches
the
Smartphone
Integration mode. See “NissanConnect
SM
App
smartphone integration” (P.4-75).
FM-AM Radio operation
radio (FM·AM) band select:
Push the
button to change the band as
follows:
AM
?
FM1
?
FM2
?
AM
TUNE (Tuning):
Turn the TUNE·FOLDER knob for manual tuning.
SEEK tuning:
Push the
or
button to tune from low to
high or high to low frequencies and to stop at
the next broadcasting station.
SCAN tuning:
Push the
button to tune from low to high
frequencies
and
stop
at
each
broadcasting
station for several seconds. Pushing the button
again during this several seconds period will
stop SCAN tuning and the radio will remain
tuned to that station.
If the
button is not pushed within this
period, SCAN tuning moves to the next station.
to
Radio memory buttons:
Up to 12 stations can be set for the FM band (6
each for FM1 and FM2) and 6 stations can be
set for the AM band.
1.
Choose
the
radio
band
using
the
button.
2.
Tune to the desired station.
3.
Push and hold the desired station preset
button
to
until beep sounds.
4.
The station indicator will then come on. The
station is now set to the button memory.
5.
Other
buttons
can
be
set
in
the
same
manner.
If the battery cable is disconnected, or if the fuse
opens, the station memory will be erased. In that
case, reset the desired stations.
CD player operation
Place the ignition switch in the ON or ACC
position. Insert the Compact Disc (CD) into the
slot with the label side facing up. The CD will be
guided
automatically
into
the
slot
and
start
playing.
After loading the CD, the number of tracks on
the CD and the play time will appear on the
display.
If another audio source is already operating, it
will automatically turn off and the CD will play.
If the system has been turned off while the CD
was playing, pushing the Power button will start
the CD.
CD PLAY:
When the CD button is pushed while a CD is
loaded, the CD will start playing.
SEEK TRACK:
When the
or
button is pushed and hold
while the CD is being played, the CD will play
while fast forwarding or rewinding. When the
button is released, the CD will return to normal
play speed.
When the
or
button is pushed while
the CD is being played, the next track or the
beginning of the current track on the CD will be
played. Push the
button again to select the
previous track.
Heater, air conditioner, audio and phone systems
4-47
4-56
Heater, air conditioner, audio and phone systems
station.
to
Station memory operations:
12 stations can be set for the FM band (6 each
for FM1 and FM2) and 6 stations can be set for
the AM band.
1.
Choose
the
radio
band
using
the
button.
2.
Tune to the desired station.
3.
Push and hold the desired station preset
button
to
until beep sounds.
4.
The station indicator will then come on.
Memorizing is now complete.
5.
Other
buttons
can
be
set
in
the
same
manner.
If the battery cable is disconnected, or if the fuse
opens, the station memory will be erased. In that
case, reset the desired stations.
CD player operation
Place the ignition switch in the ON or ACC
position, and insert the compact disc (CD) into
the slot with the label side facing up. The CD will
be guided automatically into the slot and start
playing.
After loading the CD, the number of tracks on
the CD and the play time will appear on the
display.
If another audio source is already operating, it
will automatically turn off and the CD will play.
If the system was turned off while the CD was
playing, pushing the Power button will start the
CD.
PLAY:
With a CD loaded, press the
button until
the CD mode is displayed on the screen.
Next/Previous Track and Fast
Forward/Rewind :
When the
or
button is pushed and hold
while the CD is being played, the CD will play
while fast forwarding or rewinding. When the
button is released, the CD will return to normal
play speed.
When the
or
button is pushed while
the CD is being played, the next track or the
beginning of the current track on the CD will be
played. Push the
button again to select the
previous track.
RPT (repeat) button:
When the
button is pushed while the CD is
played, the play pattern can be changed as
follows:
(CD)
(Normal)
1 Track Repeat
(CD with compressed audio files)
(Normal)
?
1 Folder Repeat
?
1 Track Repeat
?
(Normal)
RDM (random) button:
When the
button is pushed while a CD is
being played, the play pattern can be changed
as follows:
(CD)
(Normal)
1 Disc Random
(CD with compressed audio files)
(Normal)
?
1
Disc
Random
?
1
Folder
Random
?
(Normal)
CD eject button:
When the
button is pushed with the CD
loaded, the CD will be ejected.
3.
The channel indicator will then come on and
the sound will resume. Programming is now
complete.
4.
Other keys can be set in the same manner.
If the battery cable is disconnected or if the fuse
opens, the radio memory will be erased. In that
case, reset the desired stations.
Presets can also be selected by touching the
desired preset number on the screen.
Compact Disc (CD) player operation
If the radio is already operating, it automatically
turns off and the compact disc begins to play.
CD button:
When the CD button is pushed with the system
off and the compact disc loaded, the system will
turn on and the compact disc will start to play.
When the CD button is pushed with a compact
disc loaded and the radio playing, the radio will
automatically be turned off and the compact
disc will start to play.
CD/MP3/WMA display mode:
Menu item
CD/MP3 display mode
While listening to a CD or an MP3/WMA CD, certain text may be displayed (when a
CD encoded with text is being used). Depending on how the CD or MP3/WMA CD
is encoded, the text is displayed listing the artist, album and song title. There are
other keys displayed on the screen when a CD is playing:
Random
Touch the “Random” key to apply a random play pattern to the CD. If an MP3 CD is
playing, touching “Random” or alternates between Random Folder, and Random All.
This text will appear on the display. To cancel Random mode, touch the “Random”
key until the key is no longer highlighted.
Repeat
Touch the “Repeat” key to apply a repeat play pattern to the CD. If an MP3 CD is
playing, touching “Repeat” alternates between repeating the current song and
repeating the current folder. This text will appear on the display. To cancel Repeat
mode, touch the “Repeat” key until the key is no longer highlighted.
Browse
Touch the “Browse” key to display the titles on the CD in list format. Touch the title of
a song in the list to begin playing that song. If an MP3 CD is playing, touching the
“Browse” key will also list the folders on the disc. Follow the procedure for selecting
a song with the touch-screen to choose a folder.
Heater, air conditioner, audio and phone systems
4-65
improper
servicing
may
result
in
operating
difficulties or excessive emissions, and could
affect
your
warranty
coverage.
If
in
doubt
about any servicing, it is recommended
you have it done by a NISSAN dealer.
JVC0747X
MR16DDT ENGINE
1.
Engine oil filler cap
2.
Radiator filler cap
3.
Brake and clutch* fluid reservoir
4.
Air cleaner
5.
Window washer fluid reservoir
6.
Engine drive belt location
7.
Engine oil dipstick
8.
Engine coolant reservoir
9.
Fuse/fusible link holder
10.
Battery
*:
for Manual Transmission (MT) models
Do-it-yourself
8-3
ENGINE COMPARTMENT CHECK
LOCATIONS
Under
some
driving
or
climate
conditions,
occasional brake squeak, squeal or other noise
may be heard. Occasional brake noise during
light to moderate stops is normal and does not
affect the function or performance of the brake
system.
Proper brake inspection intervals should
be followed.
For additional information, see the
maintenance schedule shown in the “9. Main-
tenance and schedules” section.
JVM0620X
ENGINE COMPARTMENT
WARNING
Never use a fuse of a higher or lower
amperage rating than that specified on
the fuse box cover. This could damage
the electrical system or electronic con-
trol units or cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1.
Be sure the ignition switch and the headlight
switch are turned off.
2.
Open the engine hood.
3.
Remove the fuse/fusible link holder cover by
pushing the tab
*
1
and lifting the cover
from the right side
*
2
, then the left side
*
3
.
4.
Locate the fuse that needs to be replaced.
5.
Remove
the
fuse
using
the
fuse
puller
located in the passenger compartment fuse
box.
Do-it-yourself
8-17
FUSES
8-18
Do-it-yourself
SDI1754
6.
If the fuse is open
*
A
, replace it with a new
fuse
*
B
.
7.
If a new fuse also opens, have the electrical
system checked and repaired. It is recom-
mended you visit a NISSAN dealer for this
service.
The holder
*
4
also contains the fuses. It is
recommended you visit a NISSAN dealer for
checking and/or replacing.
JVM0621X
Fusible links
If any electrical equipment does not operate and
the
fuses are
in good
condition,
check
the
fusible links in the holders
*
1
and
*
2
. If any of
these fusible links are melted, replace only with
genuine NISSAN parts.
For checking and replacing the fusible links in
the holders
*
2
, it is recommended you visit a
NISSAN dealer.
JVM0622X
PASSENGER COMPARTMENT
WARNING
Never use a fuse of a higher or lower
amperage rating than that specified on
the fuse box cover. This could damage
the electrical system or electronic con-
trol units or cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1.
Be sure the ignition switch and the headlight
switch are turned off.
2.
Remove the fuse box cover
*
1
.
3.
Remove the fuse with the fuse puller
*
2
.
SDI1754
4.
If the fuse is open
*
A
, replace it with a new
fuse
*
B
.
5.
If a new fuse also opens, have the electrical
system checked and repaired. It is recom-
mended you visit a NISSAN dealer for this
service.
Do-it-yourself
8-19
8-20
Do-it-yourself
SDI2705
Extended storage fuse switch (if so
equipped)
To reduce battery drain, the extended storage
fuse switch comes from the factory switched off.
Prior to delivery of your vehicle, the switch is
pushed in (switched on) and should always
remain on.
If
the
extended
storage
fuse
switch
is
not
pushed in (switched on), the meter may display
a warning message. See “Extended storage fuse
warning message” (P.2-9).
If any electrical equipment does not operate,
remove the extended storage fuse switch and
check for an open fuse.
NOTE:
If the extended storage fuse switch mal-
functions or if the fuse is open, it is not
necessary to replace the switch. In this
case, remove the extended storage fuse
switch and replace it with a new fuse of the
same rating.
How to remove the extended storage fuse
switch:
1.
To remove the extended storage fuse switch,
be sure the ignition switch is in the OFF or
LOCK position.
2.
Be sure the headlight switch is in the OFF
position.
3.
Remove the fuse box cover.
4.
Pinch the storage fuse switch and pull it in
the direction illustrated.
CAUTION
Be
careful
not
to
allow
children
to
swallow the battery and removed parts.
INTELLIGENT KEY BATTERY
REPLACEMENT