Nissan Frontier - 2004 Fuse Box Diagram

Nissan Frontier - 2004 Fuse Box Diagram

VG33E engine
1.
Fuse/fusible link holder (P. 8-28)
2.
Power steering fluid reservoir (P. 8-15)
3.
Automatic transmission fluid dipstick
(A/T model) (P. 8-14)
4.
Brake fluid reservoir (P. 8-16)
5.
Clutch fluid reservoir (M/T model)
(P.8-16)
6.
Air cleaner (P. 8-22)
7.
Windshield washer fluid reservoir
(P. 8-17)
8.
Engine oil dipstick (P. 8-10)
9.
Radiator cap (P. 8-9)
10.
Engine oil filler cap (P. 8-10)
11.
Engine coolant reservoir (P. 8-9)
12.
Battery (P. 8-17)
WDI0269
0-8
Illustrated table of contents
VG33ER engine
1.
Fuse/fusible link holder (P. 8-28)
2.
Power steering fluid reservoir (P. 8-15)
3.
Automatic transmission fluid dipstick
(A/T model) (P. 8-14)
4.
Supercharger
5.
Brake fluid reservoir (P. 8-16)
6.
Air cleaner (P. 8-22)
7.
Windshield washer fluid reservoir
(P. 8-17)
8.
Engine oil dipstick (P. 8-10)
9.
Radiator cap (P. 8-9)
10.
Engine oil filler cap (P. 8-10)
11.
Engine coolant reservoir (P. 8-9)
12.
Battery (P. 8-17)
WDI0270
Illustrated table of contents
0-9
Do not use with accessories that ex-
ceed a 12 volt, 120W (10A) power draw.
Do not use double adapters or more
than one electrical accessory.
Use power outlets with the engine run-
ning to avoid discharging the vehicle
battery.
Avoid using power outlets when the air
conditioner, headlights or rear window
defroster is on.
Before
inserting
or
disconnecting
a
plug, be sure the electrical accessory
being used is turned OFF.
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat or the internal temperature
fuse may open.
When not in use, be sure to close the
cap. Do not allow water to contact the
outlet.
The dual 12 volt power outlets can be used to
power optional add-on electrical devices.
To access the dual 12 volt power outlets, push in
the tab
s
1
and remove the cover
s
2
.
The outlets are rated at 12 volt, 240W (20A)
maximum.
CAUTION
Do not use with accessories that ex-
ceed a 12 volt, 240W (20A) power draw.
Do not use double adapters or more
than one electrical accessory.
Console (if so equipped)
WIC0331
Rear (if so equipped)
WIC0332
LIC0598
DUAL 12 VOLT POWER OUTLETS (if
so equipped)
Instruments and controls
2-25
pressed, and stops at the next broadcasting sta-
tion. If using the
button, once the highest
broadcasting station is reached, the radio contin-
ues in the SEEK mode at the lowest broadcasting
station. If using the
button, once the lowest
broadcasting station is reached, the radio contin-
ues in the SEEK mode at the highest broadcast-
ing station.
Manual tuning
Use the
and
buttons for manual
tuning. To move quickly through the channels,
hold either of the tuning buttons down.
SCAN tuning
Push and hold the SEEK/TRACK tuning button
(
or
) for more than 1.5 seconds.
SCAN illuminates in the display window, and the
radio station blinks. SCAN tuning begins from
low to high frequencies or high to low frequen-
cies, depending on which button is pressed.
SCAN tuning stops at each broadcasting station
for 5 seconds. When scanning, SCAN is solid
and the radio station blinks. When temporarily
stopped on a station, SCAN blinks and the sta-
tion display is solid. Pushing the button again
during this 5 second period stops SCAN tuning
and the radio remains tuned to that station.
Station memory operations
Each preset mode (A, B or C) has 6 presets,
capable of storing any combination of AM and FM
stations.
Press the PRESET ABC button to change be-
tween the presets:
A
B
C
The radio displays icon A, B or C to indicate
which set of presets is active.
To store a radio station in a preset:
1. Select the desired preset by pressing PRE-
SET ABC.
2. Tune to the desired station.
3. Press the desired station select button for
more than 3 seconds. For example, in the
illustrations, ch2 is to be memorized. The
radio
mutes
when
the
select
button
is
pushed.
4. When the indicator illuminates in the display
and the sound resumes, memorizing is com-
plete.
5. Other station select buttons can be set in
the same manner.
If the battery cable is disconnected, or if the radio
fuse opens, the radio memory is canceled. In that
case, reset the desired stations.
Compact disc (CD) player operation
Turn the ignition key to the ACC or ON position,
and carefully insert the compact disc into the slot
LHA0119
4-14
Heater, air conditioner and audio systems
Station memory operation — Travel Preset
is OFF
Each preset mode (A, B or C) has 6 presets,
capable of storing any combination of AM, FM
and FM RDS stations.
Press the PRESET ABC button to change be-
tween the presets:
A
B
C
The radio displays icon A, B or C to indicate
which set of presets is active.
To store a radio station in a preset:
1. Tune to the desired station.
2. Press the desired station select button (>2
seconds). For example, in the illustrations
ch3 is to be memorized.
3. When the indicator illuminates in the station
selection button, a beep will sound indicat-
ing memorization is complete. For FM sta-
tions, the indicator will turn green. For AM
stations, the indicator will turn amber.
4. Other station select buttons can be set in
the same manner.
If the battery cable is disconnected, or if the radio
fuse opens, the radio memory is canceled. In that
case, reset the desired stations.
LHA0081
WHA0064
Heater, air conditioner and audio systems
4-19
VG33E engine
1.
Fuse/fusible link box
2.
Power steering fluid reservoir
3.
Automatic transmission fluid dipstick
(A/T model)
4.
Brake fluid reservoir
5.
Clutch fluid reservoir (M/T model)
6.
Air cleaner
7.
Windshield washer fluid reservoir
8.
Engine oil dipstick
9.
Radiator cap
10.
Engine oil filler cap
11.
Engine coolant reservoir
12.
Battery
WDI0269
Maintenance and do-it-yourself
8-7
VG33ER engine
1.
Fuse/fusible link box
2.
Power steering fluid reservoir
3.
Automatic transmission fluid dipstick
(A/T model)
4.
Supercharger
5.
Brake fluid reservoir
6.
Air cleaner
7.
Windshield washer fluid reservoir
8.
Engine oil dipstick
9.
Radiator cap
10.
Engine oil filler cap
11.
Engine coolant reservoir
12.
Battery
WDI0270
8-8
Maintenance and do-it-yourself
1.
Fuse box
2.
Spare fuses
3.
Fuse puller
PASSENGER COMPARTMENT
CAUTION
Never use a fuse of a higher or lower
amperage rating than specified on the
fuse box cover. This could damage the
electrical system or cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1. Be sure the ignition switch and the headlight
switch are OFF.
2. Pull the fuse box cover to remove
s
A
.
3. Remove the fuse with the fuse puller
s
B
.
WDI0304
FUSES
8-28
Maintenance and do-it-yourself
4. If the fuse is open, replace it with a known
good fuse.
5. Push the fuse box cover to install.
6. If a new fuse also opens, have the electrical
system checked and repaired by a NISSAN
dealer.
Replace the battery in the keyfob as follows:
s
1
Open the lid using a coin.
s
2
Remove the battery.
s
3
Install a new battery with the “+” facing
down.
Recommended
battery:
Toshiba
CR2025
or
equivalent.
s
4
Close the lid securely.
WDI0200
WPD0160
KEYFOB BATTERY REPLACEMENT
Maintenance and do-it-yourself
8-29