Nissan Sentra - 2003 Fuse Box Diagram

Nissan Sentra - 2003 Fuse Box Diagram

1.
Headlight and turn signal switch
(P. 2-16)
2.
Meters/gauges (P. 2-3)
3.
Windshield wiper/washer switch
(P. 2-15)
4.
Heater/air conditioner control (P. 4-2)
5.
Storage compartment (P. 2-23)
6.
Hazard warning flasher switch (P. 2-19)
7.
Center ventilators (P. 4-2)
8.
Passenger supplemental air bag (P. 1-6)
9.
Glove box (P. 2-22)
10.
Pocket
11.
12 volt DC/cigarette lighter (accessory)
(P. 2-20)
12.
12 volt DC/cigarette lighter (accessory)
(if so equipped) (P. 2-20)
13.
Radio/CD player/CD changer (P. 4-10)
14.
Cruise control and main set switch
(P. 5-13)
15.
Tilt steering lock lever (P. 3-13)
16.
Trunk release Type B (P. 3-9)
17.
Fuel filler lid opening lever (P. 3-12)
18.
Driver supplemental air bag (P. 1-6)
19.
Hood release lever (P. 3-9)
20.
Fuse box cover/coin holder
(P. 8-31, 2-22)
21.
Trunk release Type A (P. 3-9)
22.
Instrument brightness control switch
(P. 2-18)
23.
Outside mirror control switch (P. 3-15)
WIC0433
INSTRUMENT PANEL
2-2
Instruments and controls
The power outlets are for powering electrical
accessories such as cellular telephones. They
are rated at 12 Volts 120 Watts maximum.
CAUTION
Take care as the outlet and plug may be
hot during or immediately after use.
This power outlet is not designed for
use with a cigarette lighter unit.
Do not use with accessories that ex-
ceed a 12 volt, 120W (10A) power draw.
Do not use double adapters or more
than one electrical accessory.
Use this power outlet with the engine
running. (If the engine is stopped, this
could result in a discharged battery.)
Avoid using when the air conditioner,
headlights or rear window defroster is
on.
Before
inserting
or
disconnecting
a
plug, be sure the electrical accessory
being used is turned OFF.
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat or the internal temperature
fuse may blow.
When not in use, be sure to close the
cap. Do not allow water to contact the
outlet.
Instrument panel
WIC0250
Console (if so equipped)
WIC0251
POWER OUTLET
2-20
Instruments and controls
1. Push to select AM, FM1, or FM2. The se-
lected band illuminates in the display.
2. Tune to the desired station.
3. Push the desired station select button for
more than 1.5 seconds. For example, in the
illustrations, ch2 is to be memorized. The
radio
mutes
when
the
select
button
is
pushed.
4. When the indicator illuminates in the display
and the sound resumes, memorizing is com-
plete.
5. Other station select buttons can be set in
the same manner.
If the battery cable is disconnected, or if the radio
fuse opens, the radio memory is canceled. In that
case, reset the desired stations.
Compact disc (CD) player operation
Turn the ignition key to the ACC or ON position,
and carefully insert the compact disc into the slot
with the label side up. The compact disc is auto-
matically pulled into the slot and starts to play.
If the radio is already operating, it automatically
turns off and the compact disc begins to play.
CAUTION
Do not force a compact disc into the CD
insert slot. This could damage the CD
and/or CD changer/player.
CD button
When the CD button is pushed with a compact
disc loaded and the radio playing, the radio turns
off and the compact disc starts to play.
When this button is pushed while the compact
disc is playing, the compact disc stops playing.
FF (Fast Forward), REW
(Rewind) buttons
When the
or
button is pushed while
the compact disc is playing, the compact disc
plays at an increased speed while fast forwarding
or rewinding. When the button is released, the
compact disc returns to normal play speed.
APS (Automatic Program
Search) FF, APS REW
When the
button is pushed while the com-
pact disc is playing, the selection following the
present one starts to play from the beginning.
Push the
button several times to skip sev-
eral selections. Each time the button is pushed,
the CD advances one selection. (When the last
selection on the compact disc is skipped, the first
selection is played.)
When the
button is pushed, the selection
being played returns to the beginning. Push
the
button several times to skip back sev-
eral selections. Each time the button is pushed,
the CD moves back one selection.
Repeat/Random button
When the
button is pushed while the
compact disc is playing, the play pattern changes
as follows:
1:
The current selection is repeated.
RANDOM:
Selections are played at random, not
following the sequence on the compact disc. The
same program may be repeated twice.
Normal
(no symbol): All selections are played in
sequence.
When a new compact disc is inserted, the
play pattern automatically changes to the
“Normal” play pattern.
Heater, air conditioner and audio systems
4-15
QG18DE engine
1.
Engine oil filler cap
2.
Spark plug caps
3.
Brake fluid reservoir
4.
Clutch fluid reservoir (M/T model)
5.
Air cleaner
6.
Battery
7.
Fuse/Fusible link holds
8.
Radiator cap
9.
Engine oil dipstick
10.
Windshield washer fluid reservoir
11.
Coolant reservoir
12.
Power steering fluid reservoir
NOTE:
Engine cover removed for clarity.
WDI0024
ENGINE COMPARTMENT CHECK
LOCATIONS
Maintenance and do-it-yourself
8-7
ENGINE COMPARTMENT
CAUTION
Never use a fuse of a higher amperage
rating
than
specified
on
the
fuse
box
cover. This could damage the electrical
system or cause a fire.
If any electrical equipment does not come on,
check for an open fuse.
1. Be sure the ignition switch and the headlight
switch are OFF.
2. Open the engine hood.
3. Remove the fuse box cover by pushing the
tab and lifting the cover up.
4. Remove the fuse with the fuse puller. The
fuse puller is located in the center of the fuse
block in the passenger compartment.
5. If the fuse is open, replace it with a new fuse.
6. If a new fuse also opens, have the electrical
system checked and repaired by a NISSAN
dealer.
Fusible links
If the electrical equipment does not operate and
fuses are in good condition, check the fusible
links. If any of these fusible links are melted,
replace with only genuine NISSAN parts.
WDI0199
WDI0200
FUSES
Maintenance and do-it-yourself
8-31
PASSENGER COMPARTMENT
CAUTION
Never use a fuse of a higher amperage
rating
than
specified
on
the
fuse
box
cover. This could damage the electrical
system or cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1. Be sure the ignition switch and the headlight
switch are OFF.
2. Remove the coin box
s
A
.
3. Remove the fuse with the fuse puller
s
B
. The
fuse puller is located in the center of the fuse
block.
4. If the fuse is open, replace it with a known
good fuse.
5. If a new fuse also opens, have the electrical
system checked and repaired by a NISSAN
dealer.
6. Install the coin box.
WDI0201
8-32
Maintenance and do-it-yourself