Nissan Versa Sedan - 2011 Fuse Box Diagram

Nissan Versa Sedan - 2011 Fuse Box Diagram

1.
Outside mirror control switch
(if so equipped) (P. 3-31)
2.
Headlight/fog light (if so equipped)/turn
signal switch (P. 2-21)
3.
Steering wheel switch for audio control
and Bluetooth
²
Hands-Free Phone
System (if so equipped) (P. 4-53, 4-56)
4.
Driver’s supplemental air bag/horn
(P. 1-41, 2-24)
5.
Meters and gauges (P. 2-3)
6.
Cruise control main/set switches
(if so equipped) (P. 5-25)
7.
Windshield wiper/washer switch
(P. 2-19, 2-20)
8.
Audio system (if so equipped) (P. 4-17)
9.
Covered storage bin (P. 2-25)/iPod
²
outlet (if so equipped) (P. 4-47)/USB
interface (if so equipped) (P. 4-51)
10.
Center ventilator (P. 4-8)
11.
Hazard warning flasher switch (P. 2-23)
12.
Passenger’s supplemental air bag
(P. 1-41)
13.
Glove box (P. 2-28)
14.
Side ventilator (P. 4-8)
15.
Navigation system* (if so equipped)
(P. 4-2)
16.
Cup holders (P. 2-27)
17.
Shift selector (P. 5-14)
18.
Defroster switch (P. 2-20)
19.
Climate control (P. 4-9)
20.
Passenger air bag status light (P. 1-49)
21.
Ignition switch (P. 5-7)
22.
Tilt steering (P. 3-29)
23.
Instrument brightness control (P. 2-22)
24.
Hood release lever (P. 3-22)
25.
Fuel-filler lid release lever (P. 3-26)
26.
Fuse block (P. 8-24)
WIC1599
INSTRUMENT PANEL
Illustrated table of contents
0-7
HR16DE
1.
Engine oil filler cap (P. 8-10)
2.
Brake and clutch (*1) fluid reservoir
(P. 8-15)
3.
Air cleaner (P. 8-21)
4.
Battery (P. 8-17)
5.
Fuse/fusible link box (P. 8-24)
6.
Automatic transmission fluid (ATF)
dipstick (*2) (P. 8-14)
7.
Radiator cap (P. 8-8)
8.
Engine coolant reservoir (P. 8-8)
9.
Engine oil dipstick (P. 8-10)
10.
Drive belt location (P. 8-19)
11.
Windshield-washer fluid reservoir
(P. 8-16)
*1
For Manual Transmission (M/T) model
*2
For Automatic Transmission (A/T)
model
See the page number indicated in paren-
theses for operating details.
WDI0715
ENGINE COMPARTMENT CHECK
LOCATIONS
Illustrated table of contents
0-9
MR18DE
1.
Engine oil filler cap (P. 8-10)
2.
Brake and clutch (*1) fluid reservoir
(P. 8-15)
3.
Air cleaner (P. 8-21)
4.
Battery (P. 8-17)
5.
Fuse/fusible link box (P. 8-24)
6.
Automatic/Continuously variable
transmission fluid (ATF) dipstick (*2)
(P. 8-14)
7.
Radiator cap (P. 8-8)
8.
Engine oil dipstick (P. 8-10)
9.
Engine coolant reservoir (P. 8-8)
10.
Drive belt location (P.8-19)
11.
Windshield-washer fluid reservoir
(P. 8-16)
*1
For Manual Transmission (M/T) model
*2
For Automatic Transmission (A/T)
model/Continuously Variable
Transmission (CVT) model
See the page number indicated in paren-
theses for operating details.
WDI0733
0-10
Illustrated table of contents
1.
Outside mirror control switch
(if so equipped) (P. 3-31)
2.
Headlight/fog light (if so equipped)/turn
signal switch (P. 2-21)
3.
Steering wheel switch for audio control
and Bluetooth
²
Hands-Free Phone
System (if so equipped) (P. 4-53, 4-56)
4.
Driver’s supplemental air bag/horn
(P. 1-41, 2-24)
5.
Meters and gauges (P. 2-3)
6.
Cruise control main/set switches
(if so equipped) (P. 5-25)
7.
Windshield wiper/washer switch
(P. 2-19, 2-20)
8.
Audio system (if so equipped) (P. 4-17)
9.
Covered storage bin (P. 2-25)/iPod
²
outlet (if so equipped) (P. 4-47)/USB
interface (if so equipped) (P. 4-51)
10.
Center ventilator (P. 4-8)
11.
Hazard warning flasher switch (P. 2-23)
12.
Passenger’s supplemental air bag
(P. 1-41)
13.
Glove box (P. 2-28)
14.
Side ventilator (P. 4-8)
15.
Navigation system* (if so equipped)
(P. 4-2)
16.
Cup holders (P. 2-27)
17.
Shift selector (P. 5-14)
18.
Defroster switch (P. 2-20)
19.
Climate control (P. 4-9)
20.
Passenger air bag status light (P. 1-49)
21.
Ignition switch (P. 5-7)
22.
Tilt steering (P. 3-29)
23.
Instrument brightness control (P. 2-22)
24.
Hood release lever (P. 3-22)
25.
Fuel-filler lid release lever (P. 3-26)
26.
Fuse block (P. 8-24)
WIC1599
INSTRUMENT PANEL
2-2
Instruments and controls
The power outlet is for powering electrical acces-
sories such as cellular telephones. The outlet is
rated at 12 volt, 120 W (10A) maximum.
CAUTION
The outlet and plug may be hot during
or immediately after use.
Only certain power outlets are designed
for use with a cigarette lighter unit. Do
not use any other power outlet for an
accessory
lighter.
See
your
NISSAN
dealer for additional information.
Do not use with accessories that ex-
ceed a 12 volt, 120W (10A) power draw.
Do not use double adapters or more
than one electrical accessory.
Use power outlets with the engine run-
ning to avoid discharging the vehicle
battery.
Avoid using power outlets when the air
conditioner, headlights or rear window
defroster is on.
Before
inserting
or
disconnecting
a
plug, be sure the electrical accessory
being used is turned OFF.
Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat or the internal temperature
fuse may open.
When not in use, be sure to close the
cap. Do not allow water or any other
liquids to contact the outlet.
MAP POCKETS
LIC0969
LIC0971
POWER OUTLET
STORAGE
Instruments and controls
2-25
TUNE/SEEK buttons:
Manual tuning
Press the
or
button for less than 0.5
seconds for manual tuning.
SEEK tuning
Press the
or
button for more than
1.5 seconds to seek through the frequencies.
Seek tuning begins from low to high frequencies,
or high to low frequencies depending on which
button is pressed, and stops at the next broad-
casting station. Once the highest broadcasting
station is reached, the radio continues in the seek
mode at the lowest broadcasting station.
Station memory operations:
18 stations can be set for the FM and AM radio to
the A, B and C preset button in any combination
of AM or FM stations.
1. Press the PRESET A·B·C button to change
between storage banks. The radio displays
the icon A, B or C to indicate which set of
presets are active.
2. Tune to the desired station using manual
TUNE or SEEK tuning. Press and hold any of
the desired station memory buttons (1 – 6)
until a beep sound is heard. (The radio mutes
when the select button is pressed.)
3. The channel indicator will then come on and
the sound will resume. Programming is now
complete.
4. Other buttons can be set in the same man-
ner.
If the battery cable is disconnected, or if the fuse
opens, the radio memory will be canceled. In that
case, reset the desired stations.
Compact disc (CD) player operation
Place the ignition switch in the ACC or ON
position and carefully insert the compact disc
into the slot with the label side up. The compact
disc is automatically pulled into the slot and starts
to play.
If the radio is already operating, it automatically
turns off and the compact disc begins to play.
CD button:
When the CD button is pressed with a compact
disc loaded and the radio playing, the radio turns
off and the last used compact disc starts to play.
Rewind and Fast Forward
buttons:
When the
or
button is pressed
while the compact disc is playing, the compact
disc plays at an increased speed while rewinding
or fast forwarding. When the button is released,
the compact disc returns to normal play speed.
SEEK/TRACK buttons:
When
is pressed while the compact disc
is playing, the next track following the present
one
starts
to
play
from
the
beginning.
Press
several times to skip several tracks.
Each time the button is pressed, the CD ad-
vances 1 additional track. The track number ap-
pears in the display window. (When the last track
on the compact disc is skipped, the first track is
played).
When
is pressed, the track being played
returns to the beginning. Press
several
times to skip back several tracks. Each time the
button is pressed the CD moves back 1 track.
RPT button:
When the RPT button is pressed while the com-
pact disc is being played, the play pattern can be
changed as follows:
1 TRACK RPT
←→
Normal
1 TRACK RPT: The track that is currently playing
will be repeated.
4-28
Display screen, heater, air conditioner, audio and phone systems
FM/AM/SAT radio operation
FM/AM/SAT band select:
Pressing the RADIO button will change the band
as follows:
AM
←→
FM
←→
SAT (satellite, if so equipped)
When the RADIO button is pressed while the
ignition switch is in the ACC or ON position, the
radio will come on at the station last played.
No satellite radio reception is available when the
RADIO button is pressed to access satellite radio
stations unless optional satellite receiver and an-
tenna are installed and an XM
²
satellite radio
service subscription is active. Satellite radio can
only be installed in vehicles that were factory
pre-wired for satellite radio. Satellite radio is not
available in Alaska, Hawaii and Guam. If satellite
radio is not operational then the RADIO button is
used to toggle between AM and FM bands.
If a compact disc is playing when the RADIO
button is pressed, the compact disc will auto-
matically be turned off and the last radio station
played will come on.
The FM stereo indicator ST will glow during FM
stereo reception. When the stereo broadcast
signal is weak, the radio will automatically change
from stereo to monaural reception.
TUNE/FF·REW/FOLDER
(Tuning):
To
manually
tune
the
radio,
press
the
TUNE/FF·REW/FOLDER button
or
.
To move quickly through the channels, hold either
the
or
button down for more than
1.5 seconds.
SEEK/TRACK/FILE
tuning:
Press
the
SEEK/TRACK/FILE
button
or
for less than 1.5 seconds to tune from
high to low or low to high frequencies and stop at
the next broadcasting station.
To seek quickly through the channels, press and
hold the SEEK/TRACK/FILE button for more than
1.5 seconds. When the button is released, the
radio will seek to the next broadcasting station.
SCAN tuning:
Press the SCAN button for more than 1.5 sec-
onds to stop at each broadcasting station for 5
seconds. Pressing the button again during this 5
second period will stop SCAN tuning and the
radio will remain tuned to that station. If the
SCAN button is not pressed within 5 seconds,
SCAN tuning moves to the next station.
PRESET A·B·C (Station memory opera-
tions):
18 stations can be set for the FM, AM and SAT
(satellite, if so equipped) radio to the A, B and C
preset button in any combination of FM, AM or
SAT stations.
1. Choose preset bank A, B or C using the
PRESET A·B·C select button.
2. Select the desired FM, AM or SAT station
band.
3. Tune to the desired station using manual,
SEEK or SCAN tuning. Press and hold any
of the desired station memory buttons (1 –
6) until a beep sound is heard.
4. The channel indicator will then come on and
the sound will resume. Programming is now
complete.
5. Other buttons can be set in the same man-
ner.
If the battery cable is disconnected, or if the fuse
opens, the radio memory will be canceled. In that
case, reset the desired stations.
Display screen, heater, air conditioner, audio and phone systems
4-33
4. Other buttons can be set in the same man-
ner.
If the battery cable is disconnected or if the fuse
opens, the radio memory will be canceled. In that
case, reset the desired stations.
DISP/TEXT button:
When the DISP/TEXT button is pressed while in
FM radio mode, the radio display will change as
follows:
Frequency
PTY
PS
Frequency
Compact disc (CD) player operation
Place the ignition switch in the ACC or ON
position and carefully insert the compact disc
into the slot with the label side up. The compact
disc is automatically pulled into the slot and starts
to play.
If the radio is already operating, it automatically
turns off and the compact disc begins to play.
CD button:
When the CD button is pressed with the system
off and the compact disc loaded, the system will
turn on and the compact disc will start to play.
When the CD button is pressed with a compact
disc loaded and the radio playing, the radio will
automatically be turned off and the compact disc
will start to play.
DISP/TEXT button:
When the DISP/TEXT button is pressed while a
CD is playing, the display will change as follows:
CD:
Track number
Disc title
Song title
Track
number
CD with MP3 or WMA:
Track number
Folder title
Album title
Artist
Song title
Track number
TUNE/FF-REW/FOLDER
(Reverse or Fast Forward)
button:
CD:
When
the
TUNE/FF-REW/FOLDER
button
(fast
forward)
or
(reverse)
is
pressed while the compact disc is playing, the
compact disc plays at an increased speed while
reversing or fast forwarding. When the button is
released, the compact disc returns to normal play
speed.
CD with MP3 or WMA:
When
the
TUNE/FF-REW/FOLDER
button
(fast
forward)
or
(reverse)
is
pressed for less than 1.5 seconds while the
compact disc is playing, the folders in the CD will
change.
When
the
TUNE/FF-REW/FOLDER
button
(fast forward) or
(reverse) is
pressed for more than 1.5 seconds while the
compact disc is playing, the compact disc plays
at an increased speed while reversing or fast
forwarding. When the button is released, the
compact disc returns to normal play speed.
SEEK/TRACK button:
When
the
SEEK/TRACK
button
is
pressed while the compact disc is playing, the
next track following the present one starts to play
from the beginning. Press the SEEK/TRACK
button
several times to skip several tracks.
Each time the button is pressed, the CD ad-
vances one additional track. The track number
appears in the display window. (When the last
track on the compact disc is skipped, the first
track is played.)
When
the
SEEK/TRACK
button
is
pressed, the track being played returns to the
beginning.
Press
the
SEEK/TRACK
button
several times to skip back several
tracks. Each time the button is pressed the CD
moves back one track.
Display screen, heater, air conditioner, audio and phone systems
4-39
Tuning with the touchscreen:
When in AM or FM mode, the radio can be tuned
using the touchscreen. To bring up the visual
tuner, touch the “Tune” key on the lower right
corner of the screen. A screen appears with a bar
running from low frequencies on the left to high
frequencies on the right. Touch the screen at the
location of the frequency you wish to tune and the
station will change to that frequency. To return to
the regular radio display screen, touch the “OK”
key.
Tuning with the TUNE/SCROLL knob:
The radio can also be manually tuned using the
TUNE/SCROLL knob. When in FM or AM mode,
turn the TUNE/SCROLL knob to the left for lower
frequencies or to the right for higher frequencies.
When in XM mode, turn the TUNE/SCROLL
knob to change the channel.
SEEK tuning:
When
in
FM
or
AM
mode,
press
the
SEEK/CATEGORY
button
or
to
tune from low to high or high to low frequencies
and to stop at the next broadcasting station.
When in XM mode, press the SEEK/CATEGORY
button
or
to change the category.
1 to 6 Station memory operations:
Twelve stations can be set for the FM band (6 for
FM1, 6 for FM2) and six stations can be set for
the AM band. Eighteen stations can be set for the
XM band (6 for XM1, 6 for XM2, 6 for XM3).
1. Choose the radio band AM, FM1 or FM2
using the FM·AM select button or choose
the radio band XM1, XM2 or XM3 using the
XM button.
2. Tune to the desired station using manual or
seek tuning. Press and hold any of the de-
sired station memory buttons (1 – 6) until a
beep sound is heard.
3. The channel indicator will then come on and
the sound will resume. Programming is now
complete.
4. Other buttons can be set in the same man-
ner.
If the battery cable is disconnected or if the fuse
opens, the radio memory will be canceled. In that
case, reset the desired stations.
Compact disc (CD) player operation
Place the ignition switch in the ACC or ON
position and carefully insert the compact disc
into the slot with the label side up. The compact
disc is automatically pulled into the slot and starts
to play.
If the radio is already operating, it automatically
turns off and the compact disc begins to play.
CD button:
When the CD button is pressed with the system
off and the compact disc loaded, the system will
turn on and the compact disc will start to play.
When the CD button is pressed with a compact
disc loaded and the radio playing, the radio will
automatically be turned off and the compact disc
will start to play.
LHA1489
4-44
Display screen, heater, air conditioner, audio and phone systems
HR16DE Engine Model
1.
Engine oil filler cap
2.
Brake and clutch (*1) fluid reservoir
3.
Air cleaner
4.
Battery
5.
Fuse/fusible link box
6.
Automatic Transmission Fluid (ATF)
dipstick (*2)
7.
Radiator cap
8.
Engine coolant reservoir
9.
Engine oil dipstick
10.
Drive belt location
11.
Windshield-washer fluid reservoir
*1:
For Manual Transmission (M/T) model
*2:
For Automatic Transmission (A/T)
model
WDI0715
ENGINE COMPARTMENT CHECK
LOCATIONS
8-6
Maintenance and do-it-yourself
MR18DE Engine Model
1.
Engine oil filler cap
2.
Brake and clutch (*1) fluid reservoir
3.
Air cleaner
4.
Battery
5.
Fuse/Fusible link box
6.
Automatic Transmission Fluid (ATF)/
Continuously Variable Transmission
(CVT) dipstick (*2)
7.
Radiator cap
8.
Engine oil dipstick
9.
Engine coolant reservoir
10.
Drive belt location
11.
Windshield-washer fluid reservoir
*1:
For Manual Transmission (M/T) model
*2:
For Automatic Transmission (A/T)
model/Continuously Variable
Transmission (CVT) model
WDI0733
Maintenance and do-it-yourself
8-7
Two types of fuses are used. Type A is used in the
fuse boxes in the engine compartment. Type B is
used in the passenger compartment fuse box.
Type A fuses are provided as spare fuses. They
are stored in the passenger compartment fuse
box.
Type A fuses can be installed in the engine com-
partment
and
passenger
compartment
fuse
boxes.
If a type A fuse is used to replace a type B fuse,
the type A fuse will not be level with the fuse
pocket as shown in the illustration. This will not
affect the performance of the fuse. Make sure the
fuse is installed in the fuse box securely.
Type B fuses cannot be installed in the under-
hood fuse boxes. Only use type A fuses in the
underhood fuse boxes.
ENGINE COMPARTMENT
CAUTION
Never use a fuse of a higher or lower
amperage rating than specified on the
fuse box cover. This could damage the
electrical system or cause a fire.
If any electrical equipment does not come on,
check for an open fuse.
1. Be sure the ignition switch and the headlight
switch are OFF.
2. Open the engine hood.
LDI0455
LDI0457
WDI0731
FUSES
8-24
Maintenance and do-it-yourself
3. Remove the fuse box cover by pushing the
tab
±
1
and lifting the cover up from the right
side
±
2
, then the left side
±
3
.
4. Remove the fuse with the fuse puller. The
fuse puller is located in the center of the fuse
block in the passenger compartment.
5. If the fuse is open
±
A
, replace it with a new
fuse
±
B
.
6. If a new fuse also opens, have the electrical
system checked and repaired by a NISSAN
dealer.
Fusible links
If any electrical equipment does not operate and
the fuses are in good condition, check the fusible
links in the holders
±
1
,
±
2
and
±
3
. If any of these
fusible links are melted, replace only with genuine
NISSAN parts.
For checking and replacing the fusible links in
holders
±
2
and
±
3
, see a NISSAN dealer.
WDI0452
WDI0732
Maintenance and do-it-yourself
8-25
PASSENGER COMPARTMENT
CAUTION
Never use a fuse of a higher or lower
amperage rating than specified on the
fuse box cover. This could damage the
electrical system or cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
NOTE:
The fuse box is located on the driver’s side
of the instrument panel.
1. Be sure the ignition switch and the headlight
switch are OFF.
2. Pull the fuse box cover to remove
±
1
.
3. Remove the fuse with the fuse puller
±
2
.
4. If the fuse is open
±
A
, replace it with an
equivalent good fuse
±
B
.
5. Push the fuse box cover to install.
6. If a new fuse also opens, have the electrical
system checked and repaired by a NISSAN
dealer.
SDI1870
Type A
WDI0452
8-26
Maintenance and do-it-yourself
Extended storage switch (if so
equipped)
If any electrical equipment does not operate,
remove the extended storage switch and check
for an open fuse.
NOTE:
The extended storage switch is used for
long term vehicle storage. Even if the ex-
tended storage switch is broken it is not
necessary to replace it. Replace only the
open fuse in the switch with a new fuse.
How to replace the extended storage switch:
1. To remove the extended storage switch, be
sure the ignition switch is in the OFF or
LOCK position.
2. Be sure the headlight switch is in the OFF
position.
3. Remove the fuse box cover.
4. Pinch the locking tabs
±
1
found on each
side of the storage switch.
5. Pull the storage switch straight out from the
fuse box
±
2
.
Type B
LDI0456
LDI2035
Maintenance and do-it-yourself
8-27