Nissan Rogue - 2011 Fuse Box Diagram

Nissan Rogue - 2011 Fuse Box Diagram

SSI0763
1.
Side ventilator (P.4-13)
2.
Headlight, fog light* and turn signal switch
(P.2-31)
3.
Steering-wheel-mounted controls (left side)*
— Audio control* (P.4-54)
— Bluetooth
®
Hands-Free Phone System control*
(P.4-57)
4.
Steering wheel
— Horn (P.2-37)
— Driver supplemental air bag (P.1-37)
— Electric power steering system (P.5-26)
5.
Meters and gauges (P.2-3)
6.
Steering-wheel-mounted controls (right side)
— Cruise control switches (P.5-18)
7.
Wiper and washer switch (P.2-29)
8.
Center ventilator (P.4-13)
9.
Hazard warning flasher switch (P.2-36)
10. Audio system (P.4-20)/Navigation system**
— Clock (P.2-39)
— Rear view monitor* (P.4-9)
11. Front passenger supplemental air bag (P.1-37)
12. Outside remote mirror control switch (P.3-29)
13. Headlight aiming control* (P.2-34)
14. All-Wheel Drive (AWD) LOCK switch* (P.5-22)
15. Fuse box cover (P.8-20)
16. Vehicle Dynamic Control (VDC) OFF switch
(P.2-38, 5-28)
17. Hood release handle (P.3-21)
18. Tilting steering wheel lever (P.3-26)
19. Parking brake (P.5-17)
20. Ignition switch (P.5-9)
21. Heated seat switch* (P.2-37)
22. Power outlet (P.2-40)
23. Heater/air conditioner control (P.4-13)
24. Selector lever (P.5-13)
25. Front passenger air bag status light (P.1-44)
26. Rear window and outside mirror* defroster switch
(P.2-31)
27. Glove box (P.2-43)
*:
if so equipped
**:
See
a
separate
Navigation
System
Owner’s
Manual (if so equipped)
INSTRUMENT PANEL
Illustrated table of contents
0-7
SDI2127
QR25DE ENGINE
1.
Engine oil filler cap (P.8-9)
2.
Brake fluid reservoir (P.8-11)
3.
Air cleaner (P.8-16)
4.
Engine coolant reservoir (P.8-8)
5.
Window washer fluid reservoir (P.8-12)
6.
Engine drive belt location (P.8-15)
7.
Engine oil dipstick (P.8-9)
8.
Radiator filler cap (P.8-7)
— Vehicle overheat (P.6-11)
9.
Battery (P.8-13)
— Jump starting (P.6-9)
10. Fuse/fusible link holder (P.8-19)
ENGINE COMPARTMENT
Illustrated table of contents
0-9
SSI0763
1.
Side ventilator
2.
Headlight, fog light (if so equipped) and turn
signal switch
3.
Steering-wheel-mounted controls (left side)
— Audio control
— Bluetooth
®
Hands-Free Phone system control
4.
Steering wheel
— Horn
— Driver supplemental air bag
5.
Meters and gauges
6.
Steering-wheel-mounted controls (right side)
— Cruise control switches
7.
Wiper and washer switch
8.
Center ventilator
9.
Hazard warning flasher switch
10. Audio system
— Clock
— Rear view monitor (if so equipped)
11. Front passenger supplemental air bag
12. Outside remote mirror control switch
13. Headlight aiming control (if so equipped)
14. All-Wheel
Drive
(AWD)
LOCK
switch
(if
so
equipped)
15. Fuse box cover
16. Vehicle Dynamic Control (VDC) OFF switch
17. Hood release handle
18. Tilting steering wheel lever
19. Parking brake
20. Ignition switch
21. Heated seat switch (if so equipped)
22. Power outlet
23. Heater/air conditioner control
24. Selector lever
25. Front passenger air bag status light
26. Rear window and outside mirror (if so equipped)
defroster switch
27. Glove box
INSTRUMENT PANEL
2-2
Instruments and controls
5.
Push the ENTER SETTING button
*
1
.
The
display
will
return
to
the
regular
clock
display after 5 seconds.
Models with navigation system
See “CONTROL PANEL BUTTONS — COLOR
SCREEN WITH NAVIGATION SYSTEM” in the
“4. Center display, heater, air conditioner, audio,
phone and voice recognition systems” section.
SIC3492
Instrument panel
SIC3493
Center console (if so equipped)
The power outlet is located in the instrument
panel and the center console (if so equipped).
CAUTION
.
The
outlet
and
plug
may
be
hot
during or immediately after use.
.
Do not use with accessories that
exceed a 12 volt, 120W (10A) power
draw. Do not use double adapters or
more than one electrical accessory.
.
Use power outlet with the engine
running
to
avoid
discharging
the
vehicle battery.
.
Avoid using power outlet when the
air conditioner, headlights or rear
window defroster is on.
.
This power outlet is not designed
for use with a cigarette lighter unit.
.
Push the plug in as far as it will go.
If good contact is not made, the plug
may overheat or the internal tem-
perature fuse may open.
.
Before inserting or disconnecting a
plug, be sure the electrical acces-
sory being used is turned OFF.
.
When not in use, be sure to close
the
cap.
Do
not
allow
water
to
POWER OUTLET
2-40
Instruments and controls
2.
Tune to the desired station using the SEEK,
SCAN or TUNE button.
3.
Push and hold the desired radio station
preset button
to
until a beep sound is
heard. (The radio mutes when the radio
station preset button is pushed.)
4.
The station indicator will then come on and
the sound will resume. Memorizing is now
complete.
5.
Other
buttons
can
be
set
in
the
same
manner.
If the battery cable is disconnected, or if the fuse
opens, the radio memory will be erased. In that
case, reset the desired stations.
Radio Data System (RDS):
RDS stands for Radio Data System, and is a
data information service transmitted by some
radio stations on the FM band (not AM band)
encoded
within
a
regular
radio
broadcast.
Currently, most RDS stations are in large cities,
but many stations are now considering broad-
casting RDS data.
RDS can display:
.
Station call sign, such as “WHFR 98.3”.
.
Station name, such as “The Groove”.
.
Music or programming type such as “Clas-
sical”, “Country” or “Rock”.
.
Traffic reports about delays or construction.
If the station broadcasts RDS information, the
RDS icon is displayed.
RADIO DISPLAY change:
When the DISP button is pushed during the FM
radio mode, the radio display will change in the
following order.
FM radio:
Frequency
PS
(Programme
Service)/PTY
(Programme type)
In the FM radio mode, pushing the DISP button
will switch the frequency display to the PTY
display (if available), and if the DISP button is
not
pushed
again
within
5
seconds,
it
will
automatically switch to the PS display. If PTY
is not available, pressing the DISP button will
only switch between the frequency display and
the PS display.
Compact Disc (CD) player operation
Place the ignition switch in the ACC or ON
position, and insert the CD into the slot with the
label side facing up. The CD will be guided
automatically into the slot and start playing.
After loading the disc, the number of tracks on
the disc will appear on the display.
If the radio is already operating, it will auto-
matically turn off and the CD will play.
If the system has been turned off while the CD
was playing, pushing the PWR button will start
the CD.
Do not use 3.1 in (8 cm) discs.
CD PLAY:
When the CD button is pushed with the system
off and the CD loaded, the system will turn on
and the CD will start to play.
When the CD button is pushed with the CD
loaded and the radio playing, the radio will
automatically be turned off and the CD will start
to play.
CD play information:
When the DISP button is pushed for less than
1.5 seconds while the CD is being played, the
disc information display will change as follows:
CD:
Center display, heater, air conditioner, audio, phone and voice recognition systems
4-35
When the radio band select button is pushed
while the ignition switch is in the ACC or ON
position, the radio will come on at the channel
last played.
The last channel played will also come on when
the ON·OFF button is pushed to ON.
The satellite radio is not available in Alaska,
Hawaii and Guam.
If another audio source is playing when the radio
band select button is turned to ON, the audio
source will automatically be turned off and the
last radio channel played will come on.
When the stereo broadcast signal is weak, the
radio will automatically change from stereo to
monaural reception.
TUNE (Tuning):
.
For AM and FM radio
Turn the radio TUNE dial for manual tuning.
.
For XM Satellite Radio
Turn the radio TUNE dial to seek channels
from all of the categories when any category
is not selected.
SEEK tuning/CATEGORY
(CAT):
.
For AM and FM radio
Push the SEEK button
or
to tune
from low to high or high to low frequencies
and to stop at the next broadcasting station.
.
For XM Satellite Radio
Push the SEEK button
or
to tune
to the first channel of the next or previous
category.
SCAN tuning:
Push the SCAN tuning button to tune from low
to high frequencies and stop at each broad-
casting station/channel for 5 seconds. Pushing
the button again during this 5 seconds period
will stop SCAN tuning and the radio will remain
tuned to that station/channel.
If the SCAN tuning button is not pushed within 5
seconds,
SCAN
tuning
moves
to
the
next
station/channel.
*
1
to
*
6
Station memory operations:
12 stations/channels can be set for the FM band
(6 each for FM1 and FM2), 12 for XM radio (6
each for XM1 and XM2) and 6 stations can be
set for the AM band.
1.
Choose the radio band using the radio band
select button.
2.
Tune to the desired station/channel using
the SEEK/CAT, SCAN button or the radio
TUNE dial.
3.
Push and hold the desired station preset
button
*
1
to
*
6
until the radio mutes.
4.
The station indicator will then come on and
the sound will resume. Memorizing is now
complete.
5.
Other
buttons
can
be
set
in
the
same
manner.
If the battery cable is disconnected, or if the fuse
opens, the radio memory will be erased. In that
case, reset the desired stations/channels.
Compact Disc (CD) player operation
Place the ignition switch in the ACC or ON
position and insert the Compact Disc (CD) into
the slot with the label side facing up. The CD will
be guided automatically into the slot and start
playing.
After loading the CD, the number of tracks on
the CD and the play time will appear on the
display.
If the radio is already operating, it will auto-
matically turn off and the CD will play.
Center display, heater, air conditioner, audio, phone and voice recognition systems
4-41
screen at the location of the frequency you wish
to tune and the station will change to that
frequency. To return to the regular radio display
screen, touch the “OK” key.
to
Station memory operations:
12 stations/channels can be set for the FM band
(6 each for FM1 and FM2), 18 for XM radio (6
each for XM1, XM2 and XM3) and 6 stations
can be set for the AM band.
1.
Choose the radio band using the radio band
select button.
2.
Tune to the desired station/channel using
the SEEK/CATEGORY button or the TUNE
knob.
3.
Push and hold the desired station preset
button
to
until the beep sound is
heard.
4.
The station indicator will then come on and
the sound will resume. Memorizing is now
complete.
5.
Other
buttons
can
be
set
in
the
same
manner.
If the battery cable is disconnected, or if the fuse
opens, the radio memory will be erased. In that
case, reset the desired stations/channels.
Touchscreen (XM Satellite Radio):
When the XM Satellite Radio is being played,
the
following
items
are
available
with
the
touchscreen operation.
.
Channels
Displays a list of channels. Touch a preferred
channel displayed on the list to change to
that channel.
.
Categories
Displays
a
list
of
categories.
Touch
a
preferred channel displayed on the list to
display options within that category.
Compact Disc (CD) player operation
Place the ignition switch in the ACC or ON
position and insert the Compact Disc (CD) into
the slot with the label side facing up. The CD will
be guided automatically into the slot and start
playing.
If the radio is already operating, it will auto-
matically turn off and the CD will play.
If the system has been turned off while the CD
was playing, pushing the ON·OFF button will
start the CD.
Do not use 3.1 in (8 cm) discs.
PLAY:
When the CD button is pushed with the system
off and the CD loaded, the system will turn on
and the CD will start to play.
When the CD button is pushed with the CD
loaded and the radio playing, the radio will
automatically be turned off and the CD will start
to play.
While listening to a CD or an MP3/WMA CD,
certain
text
may
be
displayed
(when
a
CD
encoded with text is being used). Depending on
how the CD or MP3/WMA CD is encoded, the
text is displayed listing the artist, album and
song title.
Next/Previous Track and Fast
Forward/Rewind:
When the
or
button is pushed for
more than 1.5 seconds while the CD is being
played, the CD will play while fast forwarding or
rewinding. When the button is released, the CD
will return to normal play speed.
When the
or
button is pushed for less
than 1.5 seconds while the CD is being played,
the next track or the beginning of the current
track on the CD will be played.
When the rewind button is pushed for less than
4-48
Center display, heater, air conditioner, audio, phone and voice recognition systems
done by a NISSAN dealer.
SDI2127
QR25DE ENGINE
1.
Engine oil filler cap
2.
Brake fluid reservoir
3.
Air cleaner
4.
Engine coolant reservoir
5.
Window washer fluid reservoir
6.
Drive belt location
7.
Engine oil dipstick
8.
Radiator filler cap
9.
Battery
10. Fuse/fusible link holder
ENGINE COMPARTMENT CHECK
LOCATIONS
8-6
Maintenance and do-it-yourself
affect the function or performance of the brake
system.
Proper brake inspection intervals should
be followed.
For additional information, see the
maintenance
log
section
of
your
“NISSAN
Service and Maintenance Guide”.
SDI2107
ENGINE COMPARTMENT
CAUTION
Never use a fuse of a higher or lower
amperage rating than that specified on
the fuse box cover. This could damage
the electrical system or cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1.
Be sure the ignition switch and the headlight
switch are turned off.
2.
Open the engine hood.
3.
Remove the air cleaner duct. (See “ENGINE
COMPARTMENT
CHECK
LOCATIONS”
earlier in this section.)
4.
Remove the fuse/fusible link holder cover
using a suitable tool
*
1
and pushing the tab
*
2
.
5.
Remove the fuse with the fuse puller located
in the passenger compartment fuse box.
FUSES
Maintenance and do-it-yourself
8-19
SDI1753
6.
If the fuse is open
*
A
, replace it with a new
fuse
*
B
.
7.
If a new fuse also opens, have the electrical
system checked and repaired by a NISSAN
dealer.
Fusible links
If any electrical equipment does not operate and
fuses are in good condition, check the fusible
links. If any of these fusible links are melted,
replace only with genuine NISSAN parts.
SDI2133
PASSENGER COMPARTMENT
CAUTION
Never use a fuse of a higher or lower
amperage rating than that specified on
the fuse box cover. This could damage
the electrical system or cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1.
Be sure the ignition switch and the headlight
switch are turned off.
2.
Pull to remove the fuse box cover
*
1
.
3.
Remove the fuse with the fuse puller
*
2
.
8-20
Maintenance and do-it-yourself
SDI1753
4.
If the fuse is open
*
A
, replace it with a new
fuse
*
B
.
5.
If a new fuse also opens, have the electrical
system checked and repaired by a NISSAN
dealer.
CAUTION
Be
careful
not
to
allow
children
to
swallow the battery and removed parts.
SDI2134
KEYFOB
Replace the battery in the keyfob as follows:
1.
Remove the screw.
2.
Insert a small screwdriver into the slit of the
corner and twist it to separate the upper part
BATTERY REPLACEMENT
Maintenance and do-it-yourself
8-21