Nissan Murano - 2010 Fuse Box Diagram

Nissan Murano - 2010 Fuse Box Diagram

SSI0627
1.
Side ventilator (P.4-25)
2.
Power lift gate switch* (P.3-19)
3.
Headlight, fog light* and turn signal switch
(P.2-32)
4.
Fuel-filler door opener switch (P.3-23)
5.
Steering-wheel-mounted controls (left side)*
— Audio control* (P.4-61)
— Bluetooth
®
Hands-Free Phone System control*
(P.4-75)
6.
Meters and gauges (P.2-4)
7.
Steering wheel
— Horn (P.2-36)
— Driver supplemental air bag (P.1-45)
— Power steering system (P.5-25)
8.
Steering-wheel-mounted controls (right side)
— Cruise control switches (P.5-18)
9.
Wiper and washer switch (P.2-28)
10. Push-button ignition switch (P.5-9)
11. Center ventilator (P.4-25)
12. Center display (P.4-2)/Center color display*
(P.4-2)/Navigation system**
13. Heater/air conditioner or
Center multi-function control panel*
— Navigation system**
— Vehicle information and setting buttons (P.4-8)
— Bluetooth
®
Hands-Free Phone System (P.4-75)
— Audio system (P.4-31)
14. Hazard warning flasher switch (P.2-36)
15. Front passenger supplemental air bag (P.1-45)
16. Vehicle Dynamic Control (VDC) OFF switch
(P.2-39, 5-27)
17. Hood release handle (P.3-18)
18. Power lift gate main switch (P.3-19)
19. Power seatback switch* (P.1-6)
20. Fuse box cover (P.8-21)
21. Parking brake (P.5-17)
22. Tilting telescopic steering wheel lever or switch
(P.3-25)
23. Intelligent Key port (P.5-11)
INSTRUMENT PANEL
Illustrated table of contents
0-7
SDI2172
VQ35DE ENGINE
1.
Power steering fluid reservoir (P.8-11)
2.
Drive belt location (P.8-15)
3.
Engine oil filler cap (P.8-8)
4.
Brake fluid reservoir (P.8-12)
5.
Air cleaner (P.8-16)
6.
Fuse/fusible link holder (P.8-20)
7.
Window washer fluid reservoir (P.8-12)
8.
Engine coolant reservoir (P.8-7)
9.
Radiator filler cap (P.8-7)
10. Engine oil dipstick (P.8-8)
11. Battery (P.8-13)
ENGINE COMPARTMENT
0-10
Illustrated table of contents
SSI0627
1.
Side ventilator
2.
Power lift gate switch*
3.
Headlight, fog light* and turn signal switch
4.
Fuel-filler door opener switch
5.
Steering-wheel-mounted controls (left side)*
— Audio control*
— Bluetooth
®
Hands-Free Phone System control*
6.
Meters and gauges
7.
Steering wheel
— Horn
— Driver supplemental air bag
— Power steering system
8.
Steering-wheel-mounted controls (right side)
— Cruise control switches
9.
Wiper and washer switch
10. Push-button ignition switch
11. Center ventilator
12. Center display/Center color display*/Navigation
system**
13. Heater/air conditioner or
Center multi-function control panel*
— Navigation system**
— Vehicle information and setting buttons
— Bluetooth
®
Hands-Free Phone System
— Audio system
14. Hazard warning flasher switch
15. Front passenger supplemental air bag
16. Vehicle Dynamic Control (VDC) OFF switch
17. Hood release handle
18. Power lift gate main switch
19. Power seatback switch*
20. Fuse box cover
21. Parking brake
22. Tilting telescopic steering wheel lever or switch
23. Intelligent Key port
24. Audio system
— Clock
25. Heated seat switch*
26. Selector lever
27. Front passenger air bag status light
INSTRUMENT PANEL
2-2
Instruments and controls
To use the power outlet, pull the cover
as
illustrated.
CAUTION
.
The
outlet
and
plug
may
be
hot
during or immediately after use.
.
Do not use with accessories that
exceed a 12 volt, 120W (10A) power
draw. Do not use double adapters or
more than one electrical accessory.
.
Use power outlet with the engine
running
to
avoid
discharging
the
vehicle battery.
.
Avoid using power outlet when the
air conditioner, headlights or rear
window defroster is on.
.
This power outlet is not designed
for use with a cigarette lighter unit.
.
Push the plug in as far as it will go.
If good contact is not made, the plug
may overheat or the internal tem-
perature fuse may open.
.
Before inserting or disconnecting a
plug, be sure the electrical acces-
sory being used is turned OFF.
.
When not in use, be sure to close
the
cap.
Do
not
allow
water
to
contact the outlet.
SIC3588
To open the ashtray lid, push the lid down and
release it
*
1
.
To empty the ashtray, pull out
*
2
.
The cigarette lighter operates when the ignition
switch is in the ON position.
Push the lighter in all the way
*
3
, then release
it. When the lighter is heated, it will spring out.
Return the lighter to its original position after
use.
CIGARETTE LIGHTER AND
ASHTRAY (if so equipped)
2-40
Instruments and controls
SIC2064
VANITY MIRROR
To use the front vanity mirror, pull down the sun
visor and pull up the cover.
The automatic drive positioner system has two
features:
.
Entry/exit function
.
Memory storage
ENTRY/EXIT FUNCTION
This system is designed so that the driver’s seat
and steering
column will automatically
move
when
the
selector
lever
is
in
the
P
(Park)
position. This allows the driver to get into and
out of the driver’s seat more easily.
The driver’s seat will slide backward and the
steering wheel will move up when the driver’s
door is opened with the ignition switch in the
LOCK
position
and
the
Intelligent
Key
not
inserted in the Intelligent Key port.
The driver’s seat and steering wheel will return
to
the
previous
positions
when
the
ignition
switch is pushed to the ACC position.
The driver’s seat will not return to the previous
positions if the seat or steering adjusting switch
is operated when the seat is at the exit position.
Cancel or activate entry/exit function
The selector lever must be in the P (Park)
position with the ignition switch in the OFF
position.
The
entry/exit
function
can
be
activated
or
canceled
by
pressing
and
holding
the
SET
switch for more than 10 seconds.
The indicator lights on the memory switches (1
and 2) will blink once when the function is
canceled, and the indicator lights will blink twice
when the function is activated. Note that the
indicator lights may illuminate after 5 seconds
while holding the SET switch. This indicates
readiness for linking the Intelligent Key to a
stored memory position. Keep the SET switch
pressed for more than 10 seconds to turn on or
off the entry/exit function.
The entry/exit function can also be activated or
canceled if the “Lift Steering Wheel on Exit” key
or “Slide Driver Seat Back on Exit” key is turned
to ON or OFF in the “Comfort & Conv.” settings.
(See
“VEHICLE
INFORMATION
AND
SET-
TINGS” in the “4. Monitor, heater, air condi-
tioner,
audio,
phone
and
voice
recognition
systems” section.)
Initialize entry/exit function
If the battery cable is disconnected, or if the fuse
opens,
the
entry/exit
function
will
not
work
though this function was set on before. In such
a case, after connecting the battery or replacing
with a new fuse, open and close the driver’s
door more than two times after the ignition
switch is turned from the ON position to the
LOCK position. The entry/exit function will be
activated.
AUTOMATIC DRIVE POSITIONER (if
so equipped)
3-30
Pre-driving checks and adjustments
SPA2445
MEMORY STORAGE
Two
positions
for
the
driver’s
seat,
steering
column and outside mirrors can be stored in the
automatic drive positioner memory. Follow these
procedures to use the memory system.
1.
Move the selector lever to the P (Park)
position.
2.
Push the ignition switch to the ON position.
3.
Adjust the driver’s seat, steering column and
outside mirrors to the desired positions by
manually operating each adjusting switch.
For additional information, see “SEATS” in
the
“1. Safety
— Seats,
seat belts and
supplemental restraint system” section and
“TILT/TELESCOPIC STEERING” earlier in
this
section
and
“OUTSIDE
MIRRORS”
earlier in this section.
4.
Push the SET switch and, within 5 seconds,
push the memory switch (1 or 2).
The indicator light for the pushed memory
switch
will
stay
on
for
approximately
5
seconds after pushing the switch.
If memory is stored in the same memory
switch, the previous memory will be deleted.
Linking Intelligent Key to a stored mem-
ory position
The Intelligent Key can be linked to a stored
memory position with the following procedure.
1.
Follow one of the steps for storing a memory
position.
.
While the indicator light for the memory
switch being set is illuminated for 5 sec-
onds, push the
button on the Intelligent
Key.
.
Push the ignition switch to the OFF position,
and then push the SET switch. Push the
button
while
pushing
the
memory
button while the indicator light stays on for
approximately 5 seconds.
If the indicator light blinks, the Intelligent Key is
linked to that memory setting.
Push the ignition switch to the OFF position, and
then push the
button on the Intelligent Key.
The driver’s seat, steering wheel and outside
mirrors will move to the memorized position.
Confirming memory storage
.
Push the ignition switch to the ON position
and
push
the
SET switch.
If
the
main
memory has not been stored, the indicator
light will
come on for approximately 0.5
second. When the memory has stored in
position, the indicator light will stay on for
approximately 5 seconds.
.
If the battery cable is disconnected, or if the
fuse opens, the memory will be canceled. In
this case, reset the desired position using
the previous procedure.
.
If optional keys are added to your vehicle,
the memory storage procedure to switch 1
or 2 and linking Intelligent Key procedure to
a stored memory position should be per-
formed again for each Intelligent Key. For
additional Intelligent Key information, see
“KEYS” earlier in this section.
Selecting the memorized position
1.
Move the selector lever to the P (Park)
position.
2.
Use one of the following methods to move
the driver’s seat, the outside mirrors and the
steering wheel.
Pre-driving checks and adjustments
3-31
buttons
*
1
to
*
6
until a beep sound is
heard. (The radio mutes when the select
button is pushed.)
4.
The channel indicator will then come on and
the sound will resume. Memorizing is now
complete.
5.
Other
buttons
can
be
set
in
the
same
manner.
If the battery cable is disconnected, or if the fuse
blows, the radio memory will be erased. In that
case, reset the desired stations.
Compact Disc (CD) changer operation
Push the ignition switch to the ACC or ON
position, push the LOAD button and insert the
compact disc into the slot with the label side
facing up. The compact disc will be guided
automatically into the slot and start playing.
After loading the disc, the number of tracks on
the disc and the play time will appear on the
display.
If the radio is already operating, it will auto-
matically turn off and the compact disc will play.
If the system has been turned off while the
compact
disc
was
playing,
pushing
the
ON·OFF/VOL control knob will start the com-
pact disc.
CD LOAD:
To insert a CD in the CD changer, push the
LOAD button for less than 1.5 seconds. Select
the loading position by pushing the CD insert
select button
*
1
to
*
6
, then insert the CD.
To
insert
6
CDs
to
the
CD
changer
in
succession, push the LOAD button for more
than 1.5 seconds.
The inserted slot numbers will illuminate on the
display.
PLAY:
When the DISC (CD play) button is pushed with
the system off and the compact disc loaded, the
system will turn on and the compact disc will
start to play.
When the DISC button is pushed with the
compact disc loaded and the radio playing, the
radio will automatically be turned off and the
compact disc will start to play.
CD PLAY INFORMATION:
When the DISP button is pushed for less than
1.5 seconds while the CD is being played, the
disc information display will change as follows:
CD:
CD with MP3 or WMA:
FF (Fast Forward), REW (Re-
wind)/APS (Automatic Pro-
gram Search) FF, APS REW:
When the
(fast forward) or
(rewind)
button is pushed for more than 1.5 seconds
while the compact disc is being played, the
compact disc will play while fast forwarding or
rewinding. When the button is released, the
compact disc will return to normal play speed.
When the
or
button is pushed for less
than 1.5 seconds while the compact disc is
being played, the next track or the beginning of
Monitor, heater, air conditioner, audio, phone and voice recognition systems
4-41
low frequencies and to stop at the next
broadcasting station.
.
For XM satellite radio
Push the SEEK·CAT or TRACK button
or
to tune to the first channel of the
next or previous category.
During satellite radio reception, the following
notices will be displayed under certain condi-
tions.
.
NO SIGNAL (No signal is received while the
SAT tuner is connected.)
.
OFF AIR (Broadcasting signed off)
.
ANTENNA
ERROR
(Antenna
connection
error)
.
LOADING
(When
the
initial
setting
is
performed)
.
UPDATING (When the satellite radio sub-
scription is not active)
.
INVALID CH (Invalid channel is received.)
SCAN tuning:
Push the SCAN tuning button to tune from low
to high frequencies and stops at each broad-
casting
station
for
5
seconds.
Pushing
the
button again during this 5 seconds period will
stop SCAN tuning and the radio will remain
tuned to that station.
If the SCAN tuning button is not pushed within 5
seconds,
SCAN
tuning
moves
to
the
next
station.
*
1
to
*
6
Station memory operations:
Twelve stations/channels can be set for the FM
band (6 for FM1, 6 for FM2) and the SAT radio
(6 for SAT1, 6 for SAT2), and 6 stations can be
set for the AM band.
1.
Choose the radio band using the radio band
select button.
2.
Tune to the desired station using the SEEK,
SCAN or TUNE button.
3.
Select the desired station/channel and keep
pushing any of the desired station preset
buttons
*
1
to
*
6
until a beep sound is
heard. (The radio mutes when the select
button is pushed.)
4.
The channel indicator will then come on and
the sound will resume. Memorizing is now
complete.
5.
Other
buttons
can
be
set
in
the
same
manner.
If the battery cable is disconnected, or if the fuse
blows, the radio memory will be erased. In that
case, reset the desired stations.
Text:
When the “Text” key is selected with the multi-
function controller on the display and then the
ENTER button is pushed while the satellite radio
is being played, the text information will be
displayed on the screen.
.
CH Name
.
Category
.
Name
.
Title
.
Other
Compact Disc (CD) player/changer op-
eration
Push the ignition switch to the ACC or ON
position, push the LOAD button (if so equipped)
and insert the compact disc into the slot with the
label side facing up. The compact disc will be
guided
automatically
into
the
slot
and
start
playing.
After loading the disc, the number of tracks on
the disc and the play time will appear on the
display.
If the radio is already operating, it will auto-
matically turn off and the compact disc will play.
If the system has been turned off while the
compact
disc
was
playing,
pushing
the
4-46
Monitor, heater, air conditioner, audio, phone and voice recognition systems
done by a NISSAN dealer.
SDI2172
VQ35DE ENGINE
1.
Power steering fluid reservoir
2.
Drive belt location
3.
Engine oil filler cap
4.
Brake fluid reservoir
5.
Air cleaner
6.
Fuse/fusible link holder
7.
Window washer fluid reservoir
8.
Engine coolant reservoir
9.
Radiator filler cap
10. Engine oil dipstick
11. Battery
ENGINE COMPARTMENT CHECK
LOCATIONS
8-6
Maintenance and do-it-yourself
SDI2181
ENGINE COMPARTMENT
CAUTION
Never use a fuse of a higher or lower
amperage rating than that specified on
the fuse box cover. This could damage
the electrical system or cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1.
Be sure the ignition switch and the headlight
switch are turned off.
2.
Open the engine hood.
3.
Remove the fuse/fusible link holder cover by
pushing the tab
*
1
.
4.
Remove the fuse with the fuse puller located
in the passenger compartment fuse box.
SDI1754
5.
If the fuse is open
*
A
, replace it with a new
fuse
*
B
. Spare fuses are stored in the
passenger compartment fuse box.
6.
If a new fuse also opens, have the electrical
system checked and repaired by a NISSAN
dealer.
Fusible links
If any electrical equipment does not operate and
fuses are in good condition, check the fusible
links. If any of these fusible links are melted,
replace only with genuine NISSAN parts.
FUSES
8-20
Maintenance and do-it-yourself
SDI2196
PASSENGER COMPARTMENT
CAUTION
Never use a fuse of a higher or lower
amperage rating than that specified on
the fuse box cover. This could damage
the electrical system or cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1.
Be sure the ignition switch and the headlight
switch are turned off.
2.
Pull to remove the fuse box cover
*
1
.
3.
Remove the fuse with the fuse puller
*
2
.
4.
If the fuse is open, replace it with a new fuse.
5.
If a new fuse also opens, have the electrical
system checked and repaired by a NISSAN
dealer.
CAUTION
Be
careful
not
to
allow
children
to
swallow the battery and removed parts.
BATTERY REPLACEMENT
Maintenance and do-it-yourself
8-21