Nissan Z Roadster - 2017 Fuse Box Diagram

Nissan Z Roadster - 2017 Fuse Box Diagram

GUID-CD056C51-9EDA-4D31-87E4-A5D4B1274D82
SSI0653
1.
Ventilator (P.4-24)
2.
Center display and multi-function control panel
(if so equipped) (P.4-4) or Instrument pocket (if
so equipped) (P.2-42)
— Navigation system* (if so equipped)
— Vehicle information and setting buttons (if so
equipped) (P.4-8)
— Bluetooth
®
Hands-Free Phone System (if so
equipped) (P.4-76, P.4-86)
3.
Front passenger air bag status light (P.1-35)
4.
Front passenger supplemental air bag (P.1-30)
5.
Fuse box cover (P.8-18)
6.
Push-button ignition switch (P.5-8)
7.
Hazard warning flasher switch (P.6-2)
8.
Seat heater switch (if so equipped) (P.2-38) or
Climate controlled seat switch (if so equipped)
(P.2-39)
9.
Soft top operating switch (for Roadster models)
(P.3-21)
10.
SynchroRev Match mode (S-MODE) switch (if
so equipped) (P.5-17)
11.
Heater and air conditioner (P.4-25)
— Rear window defroster switch (P.2-32)
12.
Audio system (P.4-30)
13.
Power outlet (P.2-41)
14.
Glove box (P.2-43)
*:
Refer
to
the
separate
Navigation
System
Owner’s Manual.
Illustrated table of contents
0-11
INSTRUMENT PANEL
GUID-E5D05B50-AB50-4143-A5EA-38FC556A6F77
JVC0785X
VQ37VHR ENGINE MODEL
GUID-CA1603F1-4C1A-4216-AA17-F6627E0A896D
1.
Fuse/fusible link holder (P.8-18)
2.
Battery (P.8-11)
3.
Radiator filler cap (P.8-4)
4.
Engine oil dipstick (P.8-6)
5.
Engine oil filler cap (P.8-6)
6.
Brake fluid reservoir (P.8-9)
7.
Clutch
fluid
reservoir
(Manual
Transmission
models) (P.8-9)
8.
Power steering fluid reservoir (P.8-8)
9.
Window washer fluid reservoir (P.8-10)
10.
Air cleaner (P.8-15)
11.
Drive belt location (P.8-14)
12.
Engine coolant reservoir (P.8-4)
13.
Fuse/fusible link holder (P.8-18)
Illustrated table of contents
0-13
ENGINE COMPARTMENT
2-4
Instruments and controls
GUID-354CD56D-BD15-4FBC-90E5-D8EA13355C2F
SSI0653
1.
Ventilator (P.4-24)
2.
Center display and multi-function control panel
(if so equipped) (P.4-4) or Instrument pocket (if
so equipped) (P.2-42)
— Navigation system* (if so equipped)
— Vehicle information and setting buttons (if so
equipped) (P.4-8)
— Bluetooth
®
Hands-Free Phone System (if so
equipped) (P.4-76, P.4-86)
3.
Front passenger air bag status light (P.1-35)
4.
Front passenger supplemental air bag (P.1-30)
5.
Fuse box cover (P.8-18)
6.
Push-button ignition switch (P.5-8)
7.
Hazard warning flasher switch (P.6-2)
8.
Seat heater switch (if so equipped) (P.2-38) or
Climate controlled seat switch (if so equipped)
(P.2-39)
9.
Soft top operating switch (for Roadster models)
(P.3-21)
10.
SynchroRev Match mode (S-MODE) switch (if
so equipped) (P.5-17)
11.
Heater and air conditioner (P.4-25)
— Rear window defroster switch (P.2-32)
12.
Audio system (P.4-30)
13.
Power outlet (P.2-41)
14.
Glove box (P.2-43)
*:
Refer
to
the
separate
Navigation
System
Owner’s Manual.
INSTRUMENT PANEL
2-14
Instruments and controls
.
Since the spare tire is not equipped
with the TPMS, when a spare tire is
mounted or a wheel is replaced, the
TPMS will not function and the low
tire pressure warning light will flash
for
approximately
1
minute.
The
light
will
remain
on
after
the
1
minute.
Have
your
tires
replaced
and/or TPMS system reset as soon
as possible. It is recommended you
visit
a
NISSAN
dealer
for
these
services.
.
Replacing tires with those not ori-
ginally specified by NISSAN could
affect the proper operation of the
TPMS.
CAUTION
.
The TPMS is not a substitute for the
regular tire pressure check. Be sure
to check the tire pressure regularly.
.
If
the
vehicle
is
being
driven
at
speeds
of less than 16
MPH (25
km/h), the TPMS may not operate
correctly.
.
Be sure to install the specified size
of tires to the four wheels correctly.
Master warning light
GUID-BEC63814-B47C-4621-A314-0283456BF856
When the ignition switch is in the ON position,
the master warning light illuminates if any of the
following are displayed on the vehicle informa-
tion display:
.
No key warning
.
Low fuel warning
.
Low washer fluid warning
.
Parking brake release warning
.
Door/rear hatch/trunk open warning
.
Loose fuel cap warning
.
Check tire pressure warning
.
Extended storage fuse warning
See “Vehicle information display” (P.2-18).
Seat belt warning light and chime
GUID-BF450C8C-4C53-4F6D-ABA7-E7CD2FB4067D
The light and chime remind you to fasten seat
belts. The light illuminates whenever the ignition
switch is pushed to the ON position, and will
remain illuminated until the driver’s seat belt is
fastened. At the same time, the chime will sound
for about 6 seconds unless the driver’s seat belt
is securely fastened.
The
seat
belt
warning
light
for
the
front
passenger will illuminate if the seat belt is not
fastened when the front passenger’s seat is
occupied. For approximately 5 seconds after the
ignition switch is in the ON position, the system
does not activate the warning light for the front
passenger.
See “Seat belts” (P.1-10) for precautions on
seat belt usage.
Supplemental air bag warning light
GUID-2BED3AA4-0FC9-4559-9DF2-B9532612C064
After pushing the ignition switch to the ON
position, the supplemental air bag warning light
will illuminate. The air bag warning light will turn
off after about 7 seconds if the front air bag, side
air bag and curtain air bag systems and/or
pretensioner system are operational.
If any of the following conditions occur, the front
air bag, side air bag and curtain air bag systems
and/or pretensioner system need servicing.
.
The
supplemental
air
bag
warning
light
remains on after approximately 7 seconds.
.
The
supplemental
air
bag
warning
light
flashes intermittently.
.
The supplemental air bag warning light does
not come on at all.
It is recommended you visit a NISSAN dealer for
these services.
Unless checked and repaired, the Supplemental
2-22
Instruments and controls
3)
and
“Tire
Pressure
Monitoring
System
(TPMS)” (P.6-3).
7. “TIMER” indicator
GUID-18E114C8-C2B4-404A-8A4E-84A7A42051BC
This indicator appears when the set “TIMER”
indicator activates. You can set the time for up to
6 hours. (See “Trip computer” (P.2-23).)
8. Low outside temperature warning
GUID-90E6D863-3B05-425C-9927-080F44CBDB15
This warning appears if the outside temperature
is below 37
8
F (3
8
C). The warning can be set not
to be displayed. (See “Trip computer” (P.2-23).)
9. SynchroRev Match mode (S-MODE)
warning
GUID-C447488B-81AA-430F-A921-D8024D24AA7A
This warning appears if a system malfunction
occurs.
When
the
warning
appears,
the
S-
MODE function will not operate, but the manual
transmission will operate normally and driving
can be continued. Have the system checked. It
is recommended you visit a NISSAN dealer for
this service.
10. Extended storage fuse warning
GUID-2B7909ED-3C60-43BF-809C-8242216A5944
This warning may appear if the extended storage
fuse switch is not pushed in (switched on).
When this warning appears, push in (switch on)
the extended storage fuse switch to turn off the
warning. For more information, see “Extended
storage fuse switch” (P.8-19).
SIC4237
MAINTENANCE INDICATORS
GUID-826D2792-78BB-4DB1-9F80-E2CC7FAC9686
1. Engine oil replacement indicator
GUID-82878847-AFB9-4DB0-9035-D418FB66756D
This indicator appears when the set time comes
for changing the engine oil. You can set or reset
the distance for changing the engine oil. (See
“Trip computer” (P.2-23).)
2. Oil filter replacement indicator
GUID-63D34095-F93B-4620-A0A5-C319653463CB
This indicator appears when the set time comes
for replacing the oil filter. You can set or reset
the distance for replacing the oil filter. (See “Trip
computer” (P.2-23).)
3. Tire replacement indicator
GUID-E1E9DA72-EE66-4904-893A-4A123B2B1CAA
This indicator appears when the set time comes
for replacing tires. You can set or reset the
distance for replacing tires. (See “Trip compu-
ter” (P.2-23).)
WARNING
The tire replacement indicator is not a
substitute for regular tire checks, in-
cluding
tire
pressure
checks.
See
Changing wheels and tires
(P.8-33).
Many
factors
including
tire
inflation,
alignment, driving habits and road con-
ditions affect tire wear and when tires
should
be
replaced.
Setting
the
tire
GUID-A61C6338-78D5-4DAF-A3E8-7A6F44563A7B
SIC3984
Center console
SIC3985
Lower glove box
The power outlet is located in the center console
and on the lower glove box.
CAUTION
.
The
outlet
and
plug
may
be
hot
during or immediately after use.
.
Do not use with accessories that
exceed a 12 volt, 120W (10A) power
draw. Do not use double adapters or
more than one electrical accessory.
.
Use power outlet with the engine
running
to
avoid
discharging
the
vehicle battery.
.
Avoid using power outlet when the
air conditioner, headlights or rear
window defroster is on.
.
This power outlet is not designed
for use with a cigarette lighter unit.
.
Push the plug in as far as it will go.
If good contact is not made, the plug
may overheat or the internal tem-
perature fuse may blow.
.
Before inserting or disconnecting a
plug, be sure the electrical acces-
sory being used is turned OFF.
.
When not in use, be sure to close
the cap. Do not allow water or any
liquid to contact the outlet.
Instruments and controls
2-41
POWER OUTLET
1.
The hour display will start flashing. Turn the
TUNE/MENU knob to adjust the hour and
push the ENTER button.
2.
The minute display will start flashing. Turn
the TUNE/MENU knob to adjust the minute
and push the ENTER button to finish the
clock adjustment.
ON/OFF:
Set the clock display between on or off when the
audio unit is turned off. If set in the ON position,
the clock will be displayed when the audio unit is
turned off either by pushing the power button or
when the ignition switch is placed in the
OFF
position.
Clock Format:
Switch the clock display between 24-hour mode
and 12-hour clock mode.
Language setting:
GUID-41F1BD25-6B2D-4CBE-970C-F1A2EAAA1CD2
Push the SETUP button to enter the setup menu
screen then select Language.
Select the appropriate language and push the
ENTER button. Upon completion, the screen will
automatically adapt the language setting.
Scroll direction:
GUID-EEB66538-BC34-4B11-A409-A096884A18B6
Set the scrolling behavior of the TUNE/MENU
knob to scroll UP or DOWN.
FM·AM radio operation
GUID-7EA9795F-CE29-43A2-A44D-071AE79243AB
The audio system operates when the ignition
switch is in the
ACC
or
ON
position.
FM·AM button:
F15-A-101214-7B1FAB51-1496-45CF-B6F0-C4B1DA03DCA6
When the FM·AM button is pushed while the
audio system is off, the audio system will turn on
and the radio will turn on. When the FM·AM
button is pushed while another audio source is
already operating, it will automatically turn off,
and the radio will turn on.
To change the radio bands, push the FM·AM
button until the desired band appears.
AM
?
FM 1
?
FM 2
?
AM
TUNE/MENU knob:
F15-A-101214-2451C026-F90D-4AC7-81BC-6278CBE76162
When adjusting the broadcasting station fre-
quency manually, turn the TUNE/MENU knob
until the preferred frequency is achieved.
Seek tuning button:
F15-A-101214-CD630EFC-CD8E-44F7-84B6-72DE8A87B6DA
When adjusting the broadcasting station fre-
quency automatically, push the
button.
When
the
system
detects
a
broadcasting
station, it will stop at the station.
*
1
*
2
*
3
*
4
*
5
*
6
Radio memory
buttons:
F15-A-101214-005016B5-B827-4C5D-93B6-9C3B71A43410
During
radio
reception,
pushing
the
radio
memory button for less than 2 seconds will
select the stored radio station.
The audio system can store up to 12 FM station
frequencies (six in each of FM 1and FM 2) and 6
AM station frequencies.
To store the station frequency manually:
1.
Tune to the desired broadcasting station
frequency by using the
button.
2.
Push and hold a radio memory button
*
1
-
*
6
until a beep sounds. (The radio
mutes when the radio memory button
is pushed.)
3.
The channel indicator will display and the
radio mute disengages, indicating that the
memory is stored properly.
4.
Perform steps 1 - 3 for all other memory
buttons.
If the battery cable is disconnected, or if the
audio fuse blows, the radio memory will be
erased.
In
such
a
case,
reset
the
desired
stations.
SCAN button:
GUID-2D2BDABC-7AB8-4763-B9EA-4E9BD9995FE6
Push the SCAN button to tune from low to high
frequencies and stops at each broadcasting
station for 5 seconds. Pushing the SCAN button
again during this 5 seconds period will stop
SCAN tuning and the radio will remain tuned to
Center display, heater, air conditioner, audio, phone and voice recognition systems
4-45
4-54
Center display, heater, air conditioner, audio, phone and voice recognition systems
.
UPDATING (When the satellite radio sub-
scription is not active)
SCAN tuning:
GUID-691ADF91-E83B-414E-B2E3-14347A03462E
Push the SCAN tuning button to tune from low
to high frequencies and stop at each broad-
casting station/channel for 5 seconds. Pushing
the button again during this 5 seconds period
will stop SCAN tuning and the radio will remain
tuned to that station/channel.
If the SCAN tuning button is not pushed within 5
seconds,
SCAN
tuning
moves
to
the
next
station/channel.
*
1
to
*
6
Station memory operations:
GUID-044495CF-A340-4F81-8881-2CB80B478064
12 stations/channels can be set for the FM band
(6 each for FM1 and FM2), 18 for SiriusXM
Satellite Radio (6 each for XM1, XM2 and XM3)
and 6 stations can be set for the AM band.
1.
Choose the radio band using the radio band
select button.
2.
Tune to the desired station/channel using
the
SEEK/TRACK,
SCAN
button
or
the
radio TUNE knob.
3.
Push and hold the desired station preset
button
*
1
to
*
6
until the radio mutes.
4.
The station indicator will then come on and
the sound will resume. Memorizing is now
complete.
5.
Other
buttons
can
be
set
in
the
same
manner.
If the battery cable is disconnected, or if the fuse
opens, the radio memory will be erased. In that
case, reset the desired stations/channels.
List (AM and FM radio):
GUID-D86261E5-DCCB-4ADA-ABCA-5AE654886D2D
When the “List” key on the display is selected
while the FM or AM radio is being played, the
preset station list will be displayed.
If 1 of the 6 preset stations listed is touched and
held, the current station will be stored as the
new preset.
Menu (SiriusXM Satellite Radio):
GUID-AB48ACE9-1E2B-4F85-A4D6-40FF553A98D5
When the “Menu” key on the display is selected
while
the
SiriusXM
Satellite
Radio
is
being
played, the menu list will be displayed.
The following items are available.
.
Preset List
Displays the preset channel list. If 1 of the 6
preset stations listed is touched and held,
the current station will be stored as the new
preset.
.
Customize Channel List
Selects specific channels to skip while using
the
TUNE,
SEEK/CATEGORY or
Menu-
Categories feature.
.
Favorite Artists & Songs
Stores the current artist or song that is being
played. Touch the “Alert” key to be reminded
when the stored artist or song is playing on a
station while listening to SiriusXM Satellite
Radio.
.
Categories
Selecting a category will go to the first
channel
in
that
category
as
defined
by
SiriusXM Satellite Radio.
.
Direct Tune
Inputs
the
channel
number
by
using
a
keypad.
Compact Disc (CD) player operation
GUID-D7FD0CC5-89C9-4B76-8ACF-67B1FDDD829E
Push the ignition switch to the ACC or ON
position and insert the Compact Disc (CD) into
the slot with the label side facing up. The CD will
be guided automatically into the slot and start
playing.
After loading the CD, the number of tracks on
the CD and the play time will appear on the
display.
If the radio is already operating, it will auto-
matically turn off and the CD will play.
If the system has been turned off while the CD
was playing, pushing the ON·OFF button will
start the CD.
Do not use 3.1 in (8 cm) discs.
You
should
be
aware
that
incomplete
or
improper
servicing
may
result
in
operating
difficulties or excessive emissions, and could
affect
your
warranty
coverage.
If
in
doubt
about any servicing, it is recommended
you have it done by a NISSAN dealer.
GUID-7EA2D50B-7A0C-4012-9C54-7BD3CF10A3D8
JVC0785X
VQ37VHR ENGINE MODEL
GUID-E1841C16-4100-4792-B654-1F167FCA4F2B
1.
Fuse/fusible link holder
2.
Battery
3.
Radiator filler cap
4.
Engine oil dipstick
5.
Engine oil filler cap
6.
Brake fluid reservoir
7.
Clutch
fluid
reservoir
(Manual
Transmission
models)
8.
Power steering fluid reservoir
9.
Window washer fluid reservoir
10
Air cleaner
11.
Drive belt location
12.
Engine coolant reservoir
13.
Fuse/fusible link holder
Do-it-yourself
8-3
ENGINE COMPARTMENT CHECK
LOCATIONS
8-18
Do-it-yourself
GUID-EAEC7372-8402-42CB-9CF1-BDC17D1D5274
SDI1479A
SDI2566
ENGINE COMPARTMENT
GUID-1B0A5555-4C9F-4826-AA7F-FB5D14CE6B40
WARNING
Never use a fuse of a higher or lower
amperage rating than that specified on
the fuse box cover. This could damage
the electrical system or electronic con-
trol units or cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1.
Be sure the ignition switch is pushed to the
OFF or LOCK position and the headlight
switch is turned to OFF.
2.
Open the engine hood.
3.
Remove the fuse/fusible link holder cover.
4.
Remove the fuse with the fuse puller located
in the passenger compartment fuse box.
SDI1754
5.
If the fuse is open
*
A
, replace it with a new
fuse
*
B
. Spare fuses are stored in the
passenger compartment fuse box.
6.
If a new fuse also opens, have the electrical
system checked and repaired. It is recom-
mended you visit a NISSAN dealer for this
service.
Fusible links
GUID-A55E79C4-7290-4054-99DD-46FA7A621AD1
If any electrical equipment does not operate and
fuses are in good condition, check the fusible
links. If any of these fusible links are melted,
replace only with genuine NISSAN parts.
FUSES
SDI2361
PASSENGER COMPARTMENT
GUID-6D518851-BE98-467C-B161-6C604CC60083
WARNING
Never use a fuse of a higher or lower
amperage rating than that specified on
the fuse box cover. This could damage
the electrical system or electronic con-
trol units or cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1.
Be sure the ignition switch is pushed to the
OFF or LOCK position and the headlight
switch is turned to OFF.
2.
Open the fuse box lid.
3.
Remove the fuse with the fuse puller
*
A
.
4.
If the fuse is open, replace it with a new fuse.
Spare fuses are stored in the fuse box.
5.
If a new fuse also opens, have the electrical
system checked and repaired. It is recom-
mended you visit a NISSAN dealer for this
service.
SDI2704
Extended storage fuse switch
GUID-9D73A26D-98E9-48FD-AC49-4B6A3894BA9B
To reduce battery drain, the extended storage
fuse switch comes from the factory switched off.
Prior to delivery of your vehicle, the switch is
pushed in (switched on) and should always
remain on.
If
the
extended
storage
fuse
switch
is
not
pushed in (switched on), the “SHIPPING MODE
ON,
PUSH
STORAGE
FUSE
warning
may
appear on the vehicle information display. See
“Warnings and alerts” (P.2-21).
If any electrical equipment does not operate,
remove the extended storage fuse switch and
check for an open fuse.
Do-it-yourself
8-19
8-20
Do-it-yourself
NOTE:
If the extended storage fuse switch mal-
functions, or if the fuse is open, it is not
necessary to replace the switch. In this
case, remove the extended storage fuse
switch and replace it with a new fuse of the
same rating.
How to remove the extended storage fuse
switch:
GUID-5CB94AD4-76AC-4021-9A69-F75A6FBB6175
1.
To remove the extended storage fuse switch,
be sure the ignition switch is in the OFF or
LOCK position.
2.
Be sure the headlight switch is in the OFF
position.
3.
Remove the fuse box cover.
4.
Pinch the locking tabs
*
1
found on each
side of the storage fuse switch.
5.
Pull the storage fuse switch straight out from
the fuse box
*
2
.
GUID-19ADB578-1FFA-465C-AF0A-55E3EFD6FDE2
SDI2451
CAUTION
Be
careful
not
to
allow
children
to
swallow the battery and removed parts.
Replace the battery as follows:
1.
Remove the mechanical key from the key.
2.
Insert a small screwdriver into the slit of the
corner and twist it to separate the upper part
from the lower part. Use a cloth to protect
the casing.
3.
Replace the battery with a new one.
Recommended battery:
CR2032 or equivalent
.
Do
not
touch
the
internal
circuit
and
electric
terminals
as
doing
so
could
cause a malfunction.
.
Hold the battery by the edges. Holding
the battery across the contact points will
seriously deplete the storage capacity.
.
Make sure that the
+
side faces the
bottom case.
INTELLIGENT KEY BATTERY
REPLACEMENT