Nissan Murano - 2012 Fuse Box Diagram

Nissan Murano - 2012 Fuse Box Diagram

0-12
Illustrated table of contents
SSI0839
1.
Side ventilator (P.4-29)
2.
Meters and gauges (P.2-5)
3.
Push-button ignition switch (P.5-10)
4.
Center ventilator (P.4-29)
5.
Center display
— Center color display* (P.4-3)
— Navigation system**
6.
Heater/air conditioner control or Center multi-
function control panel* (P.4-3)
— Navigation system**
— Vehicle information and setting buttons*
(P.4-9)
— Bluetooth
®
Hands-Free
Phone
System
(models with navigation system)* (P.4-83)
— Bluetooth
®
Hands-Free
Phone
System
(models without navigation system)* (P.4-94)
7.
Hazard warning flasher switch (P.2-39)
8.
Front passenger supplemental air bag (P.1-48)
9.
Hood release handle (P.3-20)
10.
Fuse box cover (P.8-21)
11.
Parking brake (P.5-18)
12.
Intelligent Key port (P.5-12)
13.
Audio system (P.4-35)
— Clock* (P.2-42)
14.
Front passenger air bag status light (P.1-56)
15.
Power outlet (P.2-43)
16.
Rear
window
and
outside
mirror*
defroster
switch (P.2-35)
17.
Heater/air conditioner control (P.4-30) or Audio
system (P.4-35)
18.
Trunk
release
power
cancel
switch
(Cross-
Cabriolet models) (P.3-26)
19.
Glove box (P.2-47)
*:
if so equipped
**:
Refer to the separate Navigation System Own-
er’s Manual (if so equipped).
INSTRUMENT PANEL
0-14
Illustrated table of contents
SDI2172
VQ35DE ENGINE
1.
Power steering fluid reservoir (P.8-11)
2.
Drive belt location (P.8-15)
3.
Engine oil filler cap (P.8-8)
4.
Brake fluid reservoir (P.8-12)
5.
Air cleaner (P.8-17)
6.
Fuse/fusible link holder (P.8-20)
7.
Window washer fluid reservoir (P.8-13)
8.
Engine coolant reservoir (P.8-7)
9.
Radiator filler cap (P.8-7)
10.
Engine oil dipstick (P.8-8)
11.
Battery (P.8-13)
ENGINE COMPARTMENT
2-4
Instruments and controls
SSI0839
1.
Side ventilator
2.
Meters and gauges
3.
Push-button ignition switch
4.
Center ventilator
5.
Center display
— Center color display*
— Navigation system**
6.
Heater/air conditioner control or Center multi-
function control panel*
— Navigation system**
— Vehicle information and setting buttons*
— Bluetooth
®
Hands-Free
Phone
System*
(models with navigation system)
— Bluetooth
®
Hands-Free
Phone
System*
(models without navigation system)
7.
Hazard warning flasher switch
8.
Front passenger supplemental air bag
9.
Hood release handle
10.
Fuse box cover
11.
Parking brake
12.
Intelligent Key port
13.
Audio system
— Clock*
14.
Front passenger air bag status light
15.
Power outlet
16.
Rear
window
and
outside
mirror*
defroster
switch
17.
Heater/air conditioner control or Audio system
18.
Trunk
release
power
cancel
switch
(Cross-
Cabriolet models)
19.
Glove box
*:
if so equipped
**:
Refer to the separate Navigation System Own-
er’s Manual (if so equipped).
INSTRUMENT PANEL
2-44
Instruments and controls
To use the power outlet, pull the cover as
illustrated.
CAUTION
.
The
outlet
and
plug
may
be
hot
during or immediately after use.
.
Do not use with accessories that
exceed a 12 volt, 120W (10A) power
draw. Do not use double adapters or
more than one electrical accessory.
.
Use power outlet with the engine
running
to
avoid
discharging
the
vehicle battery.
.
Avoid using power outlet when the
air conditioner, headlights or rear
window defroster is on.
.
This power outlet is not designed
for use with a cigarette lighter unit.
.
Push the plug in as far as it will go.
If good contact is not made, the plug
may overheat or the internal tem-
perature fuse may open.
.
Before inserting or disconnecting a
plug, be sure the electrical acces-
sory being used is turned OFF.
.
When not in use, be sure to close
the
cap.
Do
not
allow
water
to
contact the outlet.
SIC3588
To open the ashtray lid, push the lid down and
release it
*
1
.
To empty the ashtray, pull out
*
2
.
The cigarette lighter operates when the ignition
switch is in the ON position.
Push the lighter in all the way
*
3
, then release
it. When the lighter is heated, it will spring out.
Return the lighter to its original position after
use.
CAUTION
.
The
cigarette
lighter
socket
is
a
power source for the cigarette light-
CIGARETTE LIGHTER AND
ASHTRAY (if so equipped)
The automatic drive positioner system has two
features:
.
Entry/exit function (if equipped)
.
Memory storage
ENTRY/EXIT FUNCTION (if equipped)
This system is designed so that the driver’s seat
and steering column will automatically move
when
the
selector
lever
is
in
the
P
(Park)
position. This allows the driver to get into and
out of the driver’s seat more easily.
The driver’s seat will slide backward and the
steering wheel will move up when the driver’s
door is opened with the ignition switch in the
LOCK
position
and
the
Intelligent
Key
not
inserted in the Intelligent Key port.
The driver’s seat and steering wheel will return
to
the
previous
positions
when
the
ignition
switch is pushed to the ACC position.
The driver’s seat will not return to the previous
positions if the seat or steering adjusting switch
is operated when the seat is at the exit position.
Cancel or activate entry/exit function
The selector lever must be in the P (Park)
position with the ignition switch in the OFF
position.
The
entry/exit
function
can
be
activated
or
canceled
by
pressing
and
holding
the
SET
switch for more than 10 seconds.
The indicator lights on the memory switches (1
and 2) will blink once when the function is
canceled, and the indicator lights will blink twice
when the function is activated. Note that the
indicator lights may illuminate after 5 seconds
while holding the SET switch. This indicates
readiness for linking the Intelligent Key to a
stored memory position. Keep the SET switch
pressed for more than 10 seconds to turn on or
off the entry/exit function.
The entry/exit function can also be activated or
canceled if the “Lift Steering Wheel on Exit” key
or “Slide Driver Seat Back on Exit” key is turned
to ON or OFF in the “Comfort” settings. (See
“Vehicle information and settings” in the “4.
Monitor, heater, air conditioner, audio, phone
and voice recognition systems” section.)
Initialize entry/exit function
If the battery cable is disconnected, or if the fuse
opens,
the
entry/exit
function
will
not
work
though this function was set on before. In such
a case, after connecting the battery or replacing
with a new fuse, open and close the driver’s
door more than two times after the ignition
switch is placed in the LOCK position from the
ON
position.
The
entry/exit
function
will
be
activated.
SPA2756
MEMORY STORAGE
Two
positions for
the driver’s seat,
steering
column and outside mirrors can be stored in the
automatic drive positioner memory. Follow these
procedures to use the memory system.
1.
Move the selector lever to the P (Park)
position.
2.
Push the ignition switch to the ON position.
3.
Adjust the driver’s seat, steering column and
outside mirrors to the desired positions by
manually operating each adjusting switch.
For additional information, see “Seats” in the
“1. Safety — Seats, seat belts and supple-
mental restraint system” section and “Tilt/
Pre-driving checks and adjustments
3-51
AUTOMATIC DRIVE POSITIONER (if
so equipped)
3-52
Pre-driving checks and adjustments
telescopic steering” earlier in this section
and “Outside mirrors” earlier in this section.
4.
Push the SET switch and, within 5 seconds,
push the memory switch (1 or 2).
The indicator light for the pushed memory
switch
will
stay
on
for
approximately
5
seconds after pushing the switch.
If memory is stored in the same memory
switch, the previous memory will be deleted.
Linking Intelligent Key to a stored mem-
ory position
The Intelligent Key can be linked to a stored
memory position with the following procedure.
1.
Follow one of the steps for storing a memory
position.
.
While the indicator light for the memory
switch being set is illuminated for 5 sec-
onds, push the
button on the Intelligent
Key.
.
Push the ignition switch to the OFF position,
and then push the SET switch. Push the
button while pushing the memory button
while the indicator light stays on for approxi-
mately 5 seconds.
If the indicator light blinks, the Intelligent Key is
linked to that memory setting.
Push the ignition switch to the OFF position, and
then push the
button on the Intelligent Key.
The driver’s seat, steering wheel and outside
mirrors will move to the memorized position.
Confirming memory storage
.
Push the ignition switch to the ON position
and
push
the
SET switch.
If
the
main
memory has not been stored, the indicator
light will come on for approximately 0.5
second. When the memory has stored in
position, the indicator light will stay on for
approximately 5 seconds.
.
If the battery cable is disconnected, or if the
fuse opens, the memory will be canceled. In
this case, reset the desired position using
the previous procedure.
.
If optional keys are added to your vehicle,
the memory storage procedure to switch 1
or 2 and linking Intelligent Key procedure to
a stored memory position should be per-
formed again for each Intelligent Key. For
additional Intelligent Key information, see
“Keys” earlier in this section.
Selecting the memorized position
1.
Move the selector lever to the P (Park)
position.
2.
Use one of the following methods to move
the driver’s seat, the outside mirrors and the
steering wheel.
.
Push
the
ignition
switch
to
the
ON
position and push the memory switch (1
or 2).
.
Within
45
seconds
of
opening
the
driver’s door, push the memory switch
(1 or 2).
The
driver’s
seat,
steering
column
and
outside mirrors will move to the memorized
position with the indicator light flashing, and
then the light will stay on for approximately 5
seconds.
SYSTEM OPERATION
The automatic drive positioner system will not
work or will stop operating under the following
conditions:
.
When the vehicle speed is above 4 MPH (7
km/h) (entry/exit function).
.
When the vehicle is driven (memory sto-
rage).
.
When the adjusting switch for the driver’s
seat and steering column is turned on while
the automatic drive positioner is operating.
.
When the seat, steering column and outside
mirrors have already been moved to the
memorized position.
.
When no position is stored in the memory
switch.
4-50
Monitor, heater, air conditioner, audio, phone and voice recognition systems
*
1
to
*
6
Station memory operations:
12 stations/channels can be set for the FM band
(6 for FM1, 6 for FM2) and 6 stations can be set
for the AM band.
1.
Choose the radio band AM, FM1 or FM2
using the radio band select button.
2.
Tune to the desired station using the SEEK,
SCAN or TUNE button.
3.
Select the desired station/channel and keep
pushing any of the desired station preset
buttons
*
1
to
*
6
until a beep sound is
heard. (The radio mutes when the select
button is pushed.)
4.
The channel indicator will then come on and
the sound will resume. Memorizing is now
complete.
5.
Other
buttons
can
be
set
in
the
same
manner.
If the battery cable is disconnected, or if the fuse
blows, the radio memory will be erased. In that
case, reset the desired stations.
Compact Disc (CD) changer operation
Push the ignition switch to the ACC or ON
position, push the LOAD button and insert the
compact disc into the slot with the label side
facing up. The compact disc will be guided
automatically into the slot and start playing.
After loading the disc, the number of tracks on
the disc and the play time will appear on the
display.
If the radio is already operating, it will auto-
matically turn off and the compact disc will play.
If the system has been turned off while the
compact
disc
was
playing,
pushing
the
ON·OFF/VOL control knob will start the com-
pact disc.
CD LOAD:
To insert a CD in the CD changer, push the
LOAD button for less than 1.5 seconds. Select
the loading position by pushing the CD insert
select button
*
1
to
*
6
, then insert the CD.
To
insert
6
CDs
to
the
CD
changer
in
succession, push the LOAD button for more
than 1.5 seconds.
The inserted slot numbers will illuminate on the
display.
PLAY:
When the DISC (CD play) button is pushed with
the system off and the compact disc loaded, the
system will turn on and the compact disc will
start to play.
When the DISC button is pushed with the
compact disc loaded and the radio playing, the
radio will automatically be turned off and the
compact disc will start to play.
CD PLAY INFORMATION:
When the DISP button is pushed for less than
1.5 seconds while the CD is being played, the
disc information display will change as follows:
CD:
CD with MP3 or WMA:
FF (Fast Forward), REW (Re-
wind)/APS (Automatic Program Search)
FF, APS REW:
Push the FF or REW button for more than 1.5
2.
Tune to the desired station/channel using
the
SEEK/TRACK,
SCAN
button
or
the
radio TUNE knob.
3.
Push and hold the desired station preset
button
*
1
to
*
6
until the radio mutes.
4.
The station indicator will then come on and
the sound will resume. Memorizing is now
complete.
5.
Other
buttons
can
be
set
in
the
same
manner.
If the battery cable is disconnected, or if the fuse
opens, the radio memory will be erased. In that
case, reset the desired stations/channels.
List (AM and FM radio) (models with
navigation system):
When the “List” key on the display is selected
while the FM or AM radio is being played, the
preset station list will be displayed.
If 1 of the 6 preset stations listed is touched and
held, the current station will be stored as the
new preset.
Menu (XM Satellite Radio) (models with
navigation system):
When the “Menu” key on the display is selected
while the XM Satellite Radio is being played, the
menu list will be displayed.
The following items are available.
.
Preset List
Displays the preset channel list. If 1 of the 6
preset stations listed is touched and held,
the current station will be stored as the new
preset.
.
Customize Channel List
Selects specific channels to skip while using
the
TUNE,
SEEK/CATEGORY or
Menu-
Categories feature.
.
Favorite Artists & Songs
Stores the current artist or song that is being
played. Touch the “Alert” key to be reminded
when the stored artist or song is playing on a
station while listening to XM.
.
Categories
Selecting a category will go to the first
channel in that category as defined by XM
Radio.
.
Direct Tune
Inputs
the
channel
number
by
using
a
keypad.
Text (models without navigation system):
When the “Text” key is selected with the multi-
function controller on the display and then the
ENTER button is pushed while the satellite radio
is being played, the text information listed below
will be displayed on the screen.
.
CH Name
.
Category
.
Name
.
Title
.
Other
Compact Disc (CD) player operation
Push the ignition switch to the ACC or ON
position and insert the Compact Disc (CD) into
the slot with the label side facing up. The CD will
be guided automatically into the slot and start
playing.
After loading the CD, the number of tracks on
the CD and the play time will appear on the
display.
If the radio is already operating, it will auto-
matically turn off and the CD will play.
If the system has been turned off while the CD
was playing, pushing the ON·OFF button will
start the CD.
Do not use 3.1 in (8 cm) discs.
or
PLAY:
When the DISC·AUX or DISC (CD play) button
is pushed with the system off and the CD
loaded, the system will turn on and the CD will
start to play.
When the DISC·AUX or DISC button is pushed
Monitor, heater, air conditioner, audio, phone and voice recognition systems
4-55
8-6
Maintenance and do-it-yourself
difficulties or excessive emissions, and could
affect warranty coverage.
If in doubt about
any servicing, we recommend that it be
done by a NISSAN dealer.
SDI2172
VQ35DE ENGINE
1.
Power steering fluid reservoir
2.
Drive belt location
3.
Engine oil filler cap
4.
Brake fluid reservoir
5.
Air cleaner
6.
Fuse/fusible link holder
7.
Window washer fluid reservoir
8.
Engine coolant reservoir
9.
Radiator filler cap
10.
Engine oil dipstick
11.
Battery
ENGINE COMPARTMENT CHECK
LOCATIONS
8-20
Maintenance and do-it-yourself
light to moderate stops is normal and does not
affect the function or performance of the brake
system.
Proper brake inspection intervals should
be followed.
For additional information, see the
maintenance
log
section
of
your
“NISSAN
Service and Maintenance Guide”.
SDI2181
ENGINE COMPARTMENT
CAUTION
Never use a fuse of a higher or lower
amperage rating than that specified on
the fuse box cover. This could damage
the electrical system or cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1.
Be sure the ignition switch and the headlight
switch are turned off.
2.
Open the engine hood.
3.
Remove the fuse/fusible link holder cover by
pushing the tab
*
1
.
4.
Remove the fuse with the fuse puller located
in the passenger compartment fuse box.
FUSES
SDI1754
5.
If the fuse is open
*
A
, replace it with a new
fuse
*
B
. Spare fuses are stored in the
passenger compartment fuse box.
6.
If a new fuse also opens, have the electrical
system checked and repaired by a NISSAN
dealer.
Fusible links
If any electrical equipment does not operate and
fuses are in good condition, check the fusible
links. If any of these fusible links are melted,
replace only with genuine NISSAN parts.
SDI2196
PASSENGER COMPARTMENT
CAUTION
Never use a fuse of a higher or lower
amperage rating than that specified on
the fuse box cover. This could damage
the electrical system or cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1.
Be sure the ignition switch and the headlight
switch are turned off.
2.
Pull to remove the fuse box cover
*
1
.
3.
Remove the fuse with the fuse puller
*
2
.
4.
If the fuse is open, replace it with a new fuse.
5.
If a new fuse also opens, have the electrical
system checked and repaired by a NISSAN
dealer.
Maintenance and do-it-yourself
8-21
8-22
Maintenance and do-it-yourself
SDI2704
Example
Extended storage switch (if so equipped)
To reduce battery drain, the extended storage
switch comes from the factory switched off.
Prior to delivery of your vehicle, the switch is
pushed in (switched on) and should always
remain on.
If any electrical equipment does not operate,
remove the extended storage switch and check
for an open fuse.
NOTE:
If the extended storage switch malfunc-
tions,
or
if
the
fuse
is
open,
it
is
not
necessary to replace the switch. In this
case, remove the extended storage switch
and replace it with a new fuse of the same
rating.
How to remove the extended storage
switch:
1.
To remove the extended storage switch, be
sure the ignition switch is in the OFF or
LOCK position.
2.
Be sure the headlight switch is in the OFF
position.
3.
Remove the fuse box cover.
4.
Pinch the locking tabs
*
1
found on each
side of the storage switch.
5.
Pull the storage switch straight out from the
fuse box
*
2
.
CAUTION
Be
careful
not
to
allow
children
to
swallow the battery and removed parts.
INTELLIGENT KEY BATTERY
REPLACEMENT