Nissan Cube - 2013 Fuse Box Diagram

Nissan Cube - 2013 Fuse Box Diagram

0-6
Illustrated table of contents
GUID-B892323A-AAA8-41EE-A989-C91FFB051CAA
SSI0563
1.
Front cup holders (P.2-31)
2.
Headlight, fog light and turn signal switch
— Headlight (P.2-24)
— Turn signal light (P.2-27)
— Fog light* (P.2-28)
3.
Steering wheel
— Electric power steering system (P.5-26)
— Horn (P.2-28)
— Driver’s supplemental air bag (P.1-40)
4.
Wiper and washer switch (P.2-22)
5.
Fuse box cover (P.8-22)
6.
Outside mirror remote control switch (P.3-25)
7.
Vehicle Dynamic Control (VDC) OFF switch
(P.5-29)
8.
Tilting steering wheel lever (P.3-23)
9.
Steering-wheel-mounted controls (left side)
— Audio control (P.4-47)
— Bluetooth
®
Hands-Free Phone System con-
trol (P.4-50)
10.
Steering-wheel-mounted controls (right side)
— Cruise control switches (P.5-21)
11.
Selector lever or Shift lever
— Continuously Variable Transmission (CVT)
(P.5-15)
— Manual Transmission (MT) (P.5-19)
12.
Parking brake (P.5-21)
*:
if so equipped
COCKPIT
GUID-C31EA64C-8CAA-4D48-8D97-A3301DF78435
SSI0564
MR18DE ENGINE*
GUID-73764065-69F2-48D8-B4B1-235D4A13CAC7
1.
Engine oil filler cap (P.8-9)
2.
Brake and clutch (*1) fluid reservoir (P.8-12)
3.
Air cleaner (P.8-17)
4.
Battery (P.8-13)
— Jump starting (P.6-10)
5.
Window washer fluid reservoir (P.8-12)
6.
Engine drive belt location (P.8-15)
7.
Engine oil dipstick (P.8-9)
8.
Engine coolant reservoir (P.8-8)
9.
Radiator filler cap (P.8-7)
— Vehicle overheat (P.6-12)
10.
Fuse/fusible link holder (P.8-20)
*
Shown with the resonator removed. For removal
instructions, see “Engine compartment check
locations” (P.8-6).
*1:
for Manual Transmission (MT) models
Illustrated table of contents
0-9
ENGINE COMPARTMENT
2-2
Instruments and controls
GUID-D39D3E05-1287-4630-BB8B-5DBFF20D07E0
SSI0563
1.
Front cup holders
2.
Headlight, fog light and turn signal switch
3.
Steering wheel
— Horn
— Driver’s supplemental air bag
4.
Wiper and washer switch
5.
Fuse box cover
6.
Outside mirror remote control switch
7.
Vehicle Dynamic Control (VDC) OFF switch
8.
Tilting steering wheel lever
9.
Steering-wheel-mounted controls (left side)
— Audio control
— Bluetooth
®
Hands-Free Phone System con-
trol
10.
Steering-wheel-mounted controls (right side)
— Cruise control switches
11.
Selector lever or Shift lever
— Continuously Variable Transmission (CVT)
— Manual Transmission (MT)
12.
Parking brake
*:
if so equipped
COCKPIT
2-6
Instruments and controls
SIC4712
Loose fuel cap warning message
GUID-0A73F916-C2BD-44D0-927C-5C493DB3792B
Push the trip computer mode switch
*
A
for
more than 1 second to reset the LOOSE FUEL
CAP warning message after the fuel cap has
been tightened. For additional information see
“Fuel-filler cap” (P.3-21) of this manual.
JVI0359X
Check tire pressure warning message
GUID-4B7494B7-11DF-4659-A936-5F9073B4EAA0
The CHECK TIRE PRES (pressure) warning
message is displayed when the low tire pressure
warning light
is illuminated and low tire
pressure is detected. Check and adjust the tire
pressure
to
the
recommended
COLD
tire
pressure
shown
on
the
Tire
and
Loading
Information
label.
The
CHECK
TIRE
PRES
warning message turns off when the low tire
pressure warning light
turns off.
The low tire pressure warning light
remains
illuminated until the tires are inflated to the
recommended COLD tire pressure. The CHECK
TIRE PRES warning message is displayed each
time the ignition switch is placed in the ON
position as long as the low tire pressure warning
light
remains illuminated.
For more information see “Low tire pressure
warning light” (P.2-14), “Tire Pressure Monitor-
ing System (TPMS)” (P.5-3), and “Wheels and
tires” (P.8-30).
Extended storage fuse warning message
(if so equipped)
GUID-3D458489-C9E3-42F9-BF1F-CA6C8CEC8107
The SHIPPING MODE ON/PUSH STORAGE
FUSE warning message may be displayed if the
extended storage fuse switch is not pushed in
(switched on). When this message is displayed,
push in (switch on) the extended storage fuse
switch
to
turn
off
the
message.
For
more
information, see “Extended storage fuse switch”
(P.8-23).
2-30
Instruments and controls
The heater is controlled by a thermostat,
automatically turning the heater on and off.
The indicator light will remain on as long as
the switch is on.
When the vehicle’s interior is warmed, or
before you leave the vehicle, be sure to turn
off the switch.
GUID-2D05D92C-F69F-40EA-AFA3-99D76EDC12A0
SIC4132
The power outlet is located in the instrument
panel.
CAUTION
.
The
outlet
and
plug
may
be
hot
during or immediately after use.
.
Do not use with accessories that
exceed a 12 volt, 120W (10A) power
draw. Do not use double adapters or
more than one electrical accessory.
.
Use power outlet with the engine
running
to
avoid
discharging
the
vehicle battery.
.
Avoid using power outlet when the
air conditioner, headlights or rear
window defroster is on.
.
This power outlet is not designed
for use with a cigarette lighter unit.
.
Push the plug in as far as it will go.
If good contact is not made, the plug
may overheat or the internal tem-
perature fuse may open.
.
Before inserting or disconnecting a
plug, be sure the electrical acces-
sory being used is turned OFF.
.
When not in use, be sure to close
the
cap.
Do
not
allow
water
to
contact the outlet.
POWER OUTLET
4-34
Center display, heater, air conditioner, audio and phone systems
Radio operation
GUID-C130CC55-8766-4F34-AC76-21A93B1C3333
Radio (FM/AM) band select:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Pushing the FM·AM radio band select button will
change the band as follows:
AM
?
FM1
?
FM2
?
AM
When the stereo broadcast signal is weak, the
radio will automatically change from stereo to
monaural reception.
When the radio band select button is pushed
while the ignition switch is in the ACC or ON
position, the radio will come on at the station last
played.
TUNE (Tuning):
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the TUNE button
or
for manual
tuning. To move quickly through the stations,
push and hold the TUNE button.
SEEK tuning:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the SEEK button
or
to tune from
low to high or high to low frequencies and to
stop at the next broadcasting station.
SCAN tuning:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the SCAN button to tune from low to high
frequencies and stops at each broadcasting
station for 5 seconds. Pushing the button again
during this 5 seconds period will stop SCAN
tuning and the radio will remain tuned to that
station.
If the SCAN tuning button is not pushed within 5
seconds,
SCAN
tuning
moves
to
the
next
station.
to
Station memory operations:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
12 stations can be set for the FM band (6 each
for FM1 and FM2), and 6 can be set for the AM
band for easy access.
1.
Choose the radio band using the radio band
select button.
2.
Tune to the desired station using the SEEK,
SCAN or TUNE button.
3.
Push and hold the desired radio station
preset button
to
until a beep sound is
heard. (The radio mutes when the radio
station preset button is pushed.)
4.
The station indicator will then come on and
the sound will resume. Memorizing is now
complete.
5.
Other
buttons
can
be
set
in
the
same
manner.
If the battery cable is disconnected, or if the fuse
opens, the radio memory will be erased. In that
case, reset the desired stations.
Radio Data System (RDS):
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
RDS stands for Radio Data System, and is a
data information service transmitted by some
radio stations on the FM band (not AM band)
encoded
within
a
regular
radio
broadcast.
Currently, most RDS stations are in large cities,
but many stations are now considering broad-
casting RDS data.
RDS can display:
.
Station call sign, such as “WHFR 98.3”.
.
Station name, such as “The Groove”.
.
Music or programming type such as “Clas-
sical”, “Country” or “Rock”.
.
Traffic reports about delays or construction.
If the station broadcasts RDS information, the
RDS icon is displayed.
RADIO DISPLAY change:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When the DISP button is pushed during the FM
radio mode, the radio display will change in the
following order.
FM radio:
Frequency
PS/PTY
In the FM radio mode, pressing the DISP button
will switch the frequency display to the PTY
display (if available), and if the DISP button is
not
pushed
again
within
5
seconds,
it
will
automatically switch to the PS display. If PTY
4-40
Center display, heater, air conditioner, audio and phone systems
TUNE (Tuning):
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
.
For AM and FM radio
Turn the TUNE/SCROLL knob for manual
tuning.
.
For SiriusXM Satellite Radio
Turn
the
TUNE/SCROLL
knob
to
seek
channels from all of the categories when
any category is not selected.
SEEK tuning:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
.
For AM and FM radio
Push the SEEK/CATEGORY button
or
to tune from low to high or high to low
frequencies and to stop at the next broad-
casting station.
.
For SiriusXM Satellite Radio
Push the SEEK/CATEGORY button
or
to tune to the first channel of the next or
previous category.
Tuning with the touch screen (AM and FM
radio):
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When in AM or FM mode, the radio can be
tuned using the touch screen. To bring up the
visual tuner, touch the “Tune” key on the lower
right corner of the screen. A screen appears
with a bar running from low frequencies on the
left to high frequencies on the right. Touch the
screen at the location of the frequency you wish
to tune and the station will change to that
frequency. To return to the regular radio display
screen, touch the “OK” key.
to
Station memory operations:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
12 stations/channels can be set for the FM band
(6 each for FM1 and FM2), 18 for SiriusXM
Satellite Radio (6 each for XM1, XM2 and XM3)
and 6 stations can be set for the AM band.
1.
Choose the radio band using the radio band
select button.
2.
Tune to the desired station/channel using
the SEEK/CATEGORY button or the TUNE/
SCROLL knob.
3.
Push and hold the desired station preset
button
to
until the beep sound is
heard.
4.
The station indicator will then come on and
the sound will resume. Memorizing is now
complete.
5.
Other
buttons
can
be
set
in
the
same
manner.
If the battery cable is disconnected, or if the fuse
opens, the radio memory will be erased. In that
case, reset the desired stations/channels.
Channels (SiriusXM Satellite Radio):
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When the SiriusXM Satellite Radio is being
played, select “Channels” key to display a list of
channels. Select a preferred channel from the
list to change to that channel.
Categories (SiriusXM Satellite Radio):
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When the SiriusXM Satellite Radio is being
played, select “Categories” key to display a list
of channels. Select a preferred channel from the
list to display options within that category.
Compact Disc (CD) player operation
GUID-CFB7AFB0-13F8-4632-B445-97FF26FC27BC
Place the ignition switch in the ACC or ON
position and insert the Compact Disc (CD) into
the slot with the label side facing up. The CD will
be guided automatically into the slot and start
playing.
If the radio is already operating, it will auto-
matically turn off and the CD will play.
If the system has been turned off while the CD
was playing, pushing the ON·OFF button will
start the CD.
Do not use 3.1 in (8 cm) discs.
PLAY:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When the CD button is pushed with the system
off and the CD loaded, the system will turn on
and the CD will start to play.
When the CD button is pushed with the CD
loaded and the radio playing, the radio will
automatically be turned off and the CD will start
8-6
Maintenance and do-it-yourself
improper
servicing
may
result
in
operating
difficulties or excessive emissions, and could
affect
your
warranty
coverage.
If
in
doubt
about any servicing, we recommend that
it be done by a NISSAN dealer.
GUID-E15BBCFC-0996-4A69-A4F1-8DDFBEF1D2F9
SSI0564
MR18DE ENGINE*
GUID-0976793B-7158-4222-9500-BD4F643F0668
1.
Engine oil filler cap
2.
Brake and clutch (*1) fluid reservoir
3.
Air cleaner
4.
Battery
5.
Window washer fluid reservoir
6.
Engine drive belt location
7.
Engine oil dipstick
8.
Engine coolant reservoir
9.
Radiator filler cap
10.
Fuse/fusible link holder
*1:
for Manual Transmission (MT) models
ENGINE COMPARTMENT CHECK
LOCATIONS
8-20
Maintenance and do-it-yourself
light to moderate stops is normal and does not
affect the function or performance of the brake
system.
Proper brake inspection intervals should
be followed.
For additional information, see the
maintenance
log
section
of
your
“NISSAN
Service and Maintenance Guide”.
GUID-DD7525EB-FBCE-47BB-84DB-A4DCC38E0B7E
SDI1959
ENGINE COMPARTMENT
GUID-7418E363-32CB-4361-A166-BCACA8AC6AFB
CAUTION
Never use a fuse of a higher or lower
amperage rating than that specified on
the fuse box cover. This could damage
the electrical system or cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1.
Be sure the ignition switch and the headlight
switch are turned off.
2.
Open the engine hood.
3.
Remove the resonator. (See “Engine com-
partment check locations” (P.8-6).)
4.
Remove the fuse/fusible link holder cover by
pushing the tab
*
1
and lifting the cover
from the right side
*
2
, then the left side
*
3
.
5.
Locate the fuse that needs to be replaced.
6.
Remove
the
fuse
using
the
fuse
puller
located in the passenger compartment fuse
box.
FUSES
SDI1753
7.
If the fuse is open
*
A
, replace it with a new
fuse
*
B
.
8.
If a new fuse also opens, have the electrical
system checked and repaired by a NISSAN
dealer.
The holder
*
4
also contains the fuses. For
checking and/or replacing, see a NISSAN
dealer.
SDI1869
Fusible links
GUID-236CEB33-3BE7-42D7-8B36-E7D6E5C79737
If any electrical equipment does not operate and
the fuses are in good
condition, check the
fusible links in the holders
*
1
,
*
2
and
*
3
. If
any of these fusible links are melted, replace only
with genuine NISSAN parts.
For checking and replacing the fusible links in
the holders
*
2
and
*
3
, see a NISSAN dealer.
Maintenance and do-it-yourself
8-21
8-22
Maintenance and do-it-yourself
SDI2389
PASSENGER COMPARTMENT
GUID-8BE260FC-2353-4FF5-B5BB-D600FC5C5442
CAUTION
Never use a fuse of a higher or lower
amperage rating than that specified on
the fuse box cover. This could damage
the electrical system or cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1.
Be sure the ignition switch and the headlight
switch are turned off.
2.
Pull to remove the fuse box cover
*
1
.
3.
Remove the fuse with the fuse puller
*
2
.
SDI1753
4.
If the fuse is open
*
A
, replace it with a new
fuse
*
B
.
5.
If a new fuse also opens, have the electrical
system checked and repaired by a NISSAN
dealer.
SDI2705
Extended storage fuse switch (if so
equipped)
GUID-514819CC-FBDE-4263-97AB-DD03C1EC8B98
To reduce battery drain, the extended storage
fuse switch comes from the factory switched off.
Prior to delivery of your vehicle, the switch is
pushed in (switched on) and should always
remain on.
If
the
extended
storage
fuse
switch
is
not
pushed in (switched on), the meter may display
a warning message. See “Extended storage fuse
warning message” (P.2-6).
If any electrical equipment does not operate,
remove the extended storage fuse switch and
check for an open fuse.
NOTE:
If the extended storage fuse switch mal-
functions or if the fuse is open, it is not
necessary to replace the switch. In this
case, remove the extended storage fuse
switch and replace it with a new fuse of the
same rating.
How to remove the extended storage fuse
switch:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
1.
To remove the extended storage fuse switch,
be sure the ignition switch is in the OFF or
LOCK position.
2.
Be sure the headlight switch is in the OFF
position.
3.
Remove the fuse box cover.
4.
Pinch the storage fuse switch and pull it in
the direction illustrated.
GUID-D1B5CD3E-B766-430D-A528-FDCF183A5EDF
CAUTION
Be
careful
not
to
allow
children
to
swallow the battery and removed parts.
Maintenance and do-it-yourself
8-23
KEY BATTERY REPLACEMENT