Kia Rondo - 2014 Fuse Box Diagram

Kia Rondo - 2014 Fuse Box Diagram

3 51
Safety features of your vehicle
Occupant Detection System
(ODS)
Your vehicle is equipped with an
occupant detection system in the
front passenger's seat.
The occupant detection system is
designed to detect the presence of a
properly-seated front passenger and
determine if the passenger's front air
bag should be enabled (may inflate)
or not. Only the front passenger front
air bag is controlled by the Occupant
Classification System.
(Continued)
• The SRS can function only
when the ignition switch is in
the ON position. If the SRS air
bag warning light does not illu-
minate,
or
continuously
remains on after illuminating
for about 6 seconds when the
ignition switch is turned to the
ON position,
or after the
engine is started, comes on
while driving, the SRS is not
working
properly.
If
this
occurs,
have your vehicle
immediately inspected by an
authorized Kia dealer.
• Before you replace a fuse or
disconnect a battery terminal,
turn the ignition switch to the
LOCK position and remove the
ignition switch. Never remove
or replace the air bag related
fuse(s) when the ignition switch
is in the ON position. Failure to
observe this warning will cause
the SRS air bag warning light to
illuminate.
WARNING
Do not put anything in front of the
passenger air bag
indicator.
ORP033082C
ORP033082N
Type A
Type B
4 31
Features of your vehicle
CAUTION
• To prevent possible damage
to the power window system,
do not open or close two win-
dows or more at the same
time. This will also ensure the
longevity of the fuse.
• Never try to operate the main
switch on the driver's door
and the individual door win-
dow switch in the opposite
directions at the same time. If
this is done, the window will
stop and cannot be opened or
closed.
WARNING -
Windows
• NEVER leave the ignition key
in the vehicle.
• NEVER leave any child unat-
tended in the vehicle. Even
very young children may inad-
vertently cause the vehicle to
move, entangle themselves in
the windows, or otherwise
injure themselves or others.
Always double check to make
sure all arms, hands, head
and other obstructions are
safely out of the way before
closing a window.
• Do not allow children to play
with the power windows. Keep
the driver’s door power win-
dow lock button in the LOCK
position (pressed). Serious
injury can result from uninten-
tional window operation by
the child.
• Do not extend heads or any
limbs outside the window
while the vehicle is in motion.
4 61
Features of your vehicle
Service Mode
Service Interval
Service in
It calculates and displays when you
need a scheduled maintenance
service (mileage or days).
If the remaining mileage or time
reaches 1,500 km. (900 mi) or 30
days, "Service in" message is dis-
played for several seconds each time
you set the ignition switch or Engine
Start/Stop Button to the ON position.
Service required
If you do not have your vehicle serv-
iced according to the already inputted
service interval, “Service required”
message is displayed for several sec-
onds each time you set the ignition
switch or Engine Start/Stop Button to
the ON position (The mileage and
time changes to "---").
To reset the service interval to the
mileage and days you inputted before:
- Press the RESET button
for
more than 1 second.
Service in OFF
If the service interval is not set,
“Service in OFF” message is dis-
played on the LCD display.
NOTICE
If any of the following conditions
occurs, the mileage and days may be
incorrect.
-
The battery cable is disconnected.
-
The fuse switch is turned off.
-
The battery is discharged.
ORP042065
ORP042205
Type A
Type B
ORP042066
ORP042206
Type A
Type B
ORP042067
ORP042207
Type A
Type B
Features of your vehicle
68
4
Press start button again
(for smart key system)
• This warning message illuminates
if you can not operate the Engine
Start/Stop Button when there is a
problem with the Engine Start/Stop
Button system.
• It means that you could start the
engine by pressing the Engine
Start/ Stop Button once more.
If the warning illuminates each time
you press the Engine Start/Stop
Button, have your vehicle inspected
by an authorized Kia dealer.
Press start button with smart key
(for smart key system)
• This warning message illuminates
if you press the Engine Start/Stop
Button while the warning message
“Key not detected” is illuminating.
At this time, the immobilizer indica-
tor light blinks.
Check fuse "BRAKE SWITCH"
(for smart key system and auto-
matic transaxle)
• This warning message illuminates
if the brake switch fuse is discon-
nected.
• It means that you should replace
the fuse with a new one. If that is
not possible, you can start the
engine by pressing the Engine
Start/Stop Button for 10 seconds in
the ACC position.
ORP042079
ORP042221
Type A
Type B
ORP042080
ORP042222
Type A
Type B
ORP042081
ORP042223
Type A
Type B
Features of your vehicle
70
4
Sunroof Open (if equipped)
• The warning message illuminates
if you turn off the engine and then
open the driver's door when the
sunroof is open.
Low Washer Fluid
• This warning message illuminates
on the service reminder mode if
the washer fluid level in the reser-
voir is nearly empty.
• It means that you should refill the
washer fluid.
Turn on "FUSE SWITCH"
• This warning message illuminates
if the fuse switch on the fuse box is
OFF.
• It means that you should turn the
fuse switch on.
For more details, refer to “Fuses” in
chapter 7.
ORP042085
ORP042227
Type A
Type B
ORP042086
ORP042228
Type A
Type B
ORP042087
ORP042229
Type A
Type B
Driving your vehicle
12
5
NOTICE
If the battery is weak or the smart
key does not work correctly, you
can start the engine by pressing
the engine start/stop button with
the smart key.
The side with the lock button
should
contact
the
engine
start/stop button directly.
When
you
press
the
engine
start/stop button directly with the
smart key, the smart key should
contact the button at a right angle.
(Continued)
(Continued)
When the stop lamp fuse is blown,
you can't start the engine normal-
ly. Replace the fuse with a new
one. If it is not possible, you can
start the engine by pressing the
ENGINE START/STOP
button
for 10 seconds
while it is in the
ACC position. The engine can
start without depressing the brake
pedal. But for your safety always
depress the brake pedal before
starting the engine.
CAUTION
Do not press the ENGINE
START/ STOP button for more
than 10 seconds except when
the stop lamp fuse is blown.
ORP052003
7 3
Maintenance
ENGINE COMPARTMENT
ORP072002
1. Engine oil dipstick
2. Engine oil filler cap
3. Engine coolant reservoir
4. Radiator cap
5. Brake/clutch* fluid reservoir
6. Windshield washer fluid reservoir
7. Air cleaner
8. Positive battery terminal
9. Negative battery terminal
10. Fuse box
* : if equipped
NU 2.0L GDI
The actual engine room in the vehicle may differ from the illustration.
7 61
Maintenance
FUSES
A vehicle’s electrical system is pro-
tected from electrical overload dam-
age by fuses.
This vehicle has 3 (or 4) fuse panels,
one located in the driver’s side panel
bolster, others in the engine com-
partment near the battery.
If any of your vehicle’s lights, acces-
sories, or controls do not work, check
the appropriate circuit fuse. If a fuse
has blown, the element inside the
fuse will be melted.
If the electrical system does not
work, first check the driver’s side
fuse panel.
Always replace a blown fuse with
one of the same rating.
Before replacing a blown fuse, dis-
connect the negative battery cable.
If the replacement fuse blows, this
indicates an electrical problem. Avoid
using the system involved and imme-
diately consult an authorized Kia
dealer.
Three kinds of fuses are used: blade
type for lower amperage rating, car-
tridge type, and multi fuse for higher
amperage ratings.
NOTICE
The actual fuse/relay panel label
may differ from equipped items.
WARNING
- Fuse replace-
ment
Never replace a fuse with any-
thing but another fuse of the
same rating.
• A higher capacity fuse could
cause damage and possibly a
fire.
• Never install a wire or alu-
minum foil instead of the
proper fuse - even as a tem-
porary repair. It may cause
extensive wiring damage and
a possible fire.
CAUTION
Do not use a screwdriver or any
other metal object to remove
fuses because it may cause a
short circuit and damage the
system.
Normal
Normal
Blade type
Cartridge type
Multi fuse type
Blown
Blown
Normal
Blown
ORB072110/ODM072020
Normal
Blown
Battery fuse terminal
Maintenance
62
7
Instrument panel fuse replace-
ment
1. Turn the ignition switch and all
other switches off.
2. Open the fuse panel cover.
3. Pull the suspected fuse straight
out. Use the removal tool provided
in the engine compartment fuse
panel.
4. Check the removed fuse; replace it
if it is blown.
5. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips.
If it fits loosely, consult an authorized
Kia dealer.
If you do not have a spare, use a
fuse of the same rating from a circuit
you may not need for operating the
vehicle, such as the cigar lighter
fuse.
CAUTION
• When replacing an open fuse
or relay with a new one, make
sure the new fuse or relay fits
tightly into the clips.
The
incomplete fastening fuse or
relay may cause the vehicle
wiring and electric systems
damage and a possible fire.
• Do not remove fuses, relays
and terminals fastened with
bolts or nuts.The fuses, relays
and terminals may be fas-
tened incompletely, and it may
cause a possible fire. If fuses,
relays and terminals fastened
with bolts or nuts are open,
consult with an authorized Kia
dealer.
Do not input any other objects
except fuses or relays into
fuse/relay terminals such as a
driver or wiring. It may cause
contact failure and system
malfunction.
ORP072014
ORP072015
7 63
Maintenance
If the headlights or other electrical
components do not work and the
fuses are OK, check the fuse block in
the engine compartment. If a fuse is
blown, it must be replaced.
Fuse switch
Always, put the fuse switch at the ON
position.
If you move the switch to the OFF
position, some items such as audio
and digital clock must be reset and
transmitter (or smart key) may not
work properly.
Engine compartment panel fuse
replacement
1. Turn the ignition switch and all
other switches off.
2. Remove the fuse box cover by
pressing the tap and pulling up the
cover.
3. Check the removed fuse; replace it
if it is blown. To remove or insert
the fuse, use the fuse puller in the
engine compartment fuse panel.
4. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips. If it fits loosely, consult
an authorized Kia dealer.
ORP072016
CAUTION
Always place the fuse switch in
the ON position while driving
the vehicle.
ORP072017
Maintenance
64
7
Main fuse
If the main fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery
cable.
3. Remove the nuts shown in the pic-
ture above.
4. Replace the fuse with a new one
of the same rating.
5. Reinstall in the reverse order of
removal.
Multi fuse
If the multi fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery
cable.
3. Remove the fuse panel on the
right side in the engine compart-
ment.
4. Remove the nuts shown in the pic-
ture above.
CAUTION
- Fuse panel
covers
After checking the fuse panel in
the
engine
compartment,
securely install the fuse panel
cover. If not, electrical failures
may occur from water contact.
OJD072018
OGD071020
7 65
Maintenance
5. Replace the fuse with a new one
of the same rating.
6. Reinstall in the reverse order of
removal.
If the multi fuse is blown, consult an
authorized Kia dealer.
Fuse/relay panel description
Inside the fuse/relay panel covers,
you can find the fuse/relay label
describing fuse/relay name and
capacity.
Maintenance
66
7
Instrument panel fuse panel
NOTICE
Not all fuse panel descriptions in
this manual may be applicable to
your vehicle. It is accurate at the
time of printing. When you inspect
the fuse panel in your vehicle, refer
to the fuse panel label.
NOTICE
The actual fuse/relay panel label
may differ from equipped items.
ORP072019
ORP073020C
7 67
Maintenance
Engine compartment fuse
panel
NOTICE
The actual fuse/relay panel label
may differ from equipped items.
OGD071023
ORP072022N
Maintenance
68
7
Instrument panel (Driver’s side fuse panel)
No.
Fuse rating
Description
Protected component
1
30A
P/SEAT DRV
4WAY : Driver Lumbar Support Switch
6WAY : Driver Seat Manual Switch
2
25A
P/WDW RH
Power Window Relay RH, Driver/Passenger Safety Power Window Module,
Rear Safety Power Window Module RH
3
25A
P/WDW LH
Power Window Relay LH, Driver/Passenger Safety Power
Window Module, Rear Safety Power Window Module LH
4
20A
DR LOCK
Door Lock/Unlock Relay, Two Turn Unlock Relay
5
15A
SPARE 1
-
6
20A
POWER
OUTLET 1
Cigarette Lighter, Rear Power Outlet
7
30A
SPARE 2
-
8
7.5A
MODULE 3
Frt Seat Warmer Sw, Hlld Sw, Navigation, Amp, Rear Seat Warmer Ecu, Auto Hlld Ecu, Heater Control
Unit
9
20A
S/HEATER FRT
SEAT VENT
Driver/Passenger Seat Warmer Module
10
10A
MODULE 6
A/V & Navigation Head Unit (W/O ISG), Audio (W/O ISG), DC-DC Converter (With ISG), Digital Clock,
Smart Key Control Module, BCM, Outside Mirror Switch, Outside Mirror
7 69
Maintenance
No.
Fuse rating
Description
Protected component
11
7.5A
A/CON1
Cluster Ionizer, A/C Control Module, Blower Relay, PTC Relay
12
7.5A
MODULE 5
Head Lamp Washer Relay, Portable Lamp, Passenger Seat Warmer Module, Rear Seat Warmer Module,
Driver Seat Warmer Module
13
10A
HTD MIRR
Driver/Passenger Outside Mirror, ECU, A/C Control Module
14
10A
INTERIOR
LAMP
Glove Box Lamp, Luggage Lamp, Vanity Lamp LH/RH, Room Lamp, Overhead Console Lamp, Door
Warning Sw, Foot Lamp LH/RH, Portable Lamp, Door Warning Sw, Puddle Lamp LH/RH, Personal Lamp
LH/RH
15
10A
SMART KEY 2
Immobilizer Module, Start Stop Button Switch
16
20A
SUNROOF
Panorama Sunroof
17
7.5A
MODULE 1
Electric Parking Brake Module, Rear Parking Assist Sensor, Smart Parking Assist Control Module, Crash Pad
Lower Switch, Rear Parking Assist Sensor Buzzer, Tire Pressure Monitoring System
18
15A
HTD STRG
Steering Wheel Heater
19
10A
ECU
Immobilizer Module, Smart Key Control Module, ECU, Speed Sensor
20
15A
WIPER
Front Washer Motor, Rear Wiper Motor, Rear Wiper Relay
Maintenance
70
7
No.
Fuse rating
Description
Protected component
21
7.5A
MEMORY 2
Rf Receiver
22
10A
MEMORY 1
Instrument Cluster, Tire Pressure Monitoring Module, BCM, A/C Control Module, Digital Clock, Data Link
Connector, Buzzer
23
7.5A
CLUSTER
Instrument Cluster, DC-DC Converter (With ISG)
24
7.5A
MDPS
MDPS Unit
25
20A
SPARE 3
-
26
7.5A
START
Start Relay, ECU, Ignition Lock Switch, Transaxle Range Switch, TCU, Smart Key Control Module
27
15A
MULTI MEDIA
A/V & Navigation Head Unit (W/O ISG), Audio (W/O ISG), DC-DC Converter (With ISG)
28
20A
SMART KEY 1
Smart Key Control Module
29
15A
A/BAG
SRS Control Module
30
7.5A
MODULE 2
Rear Seat Warmer Sw, ICM BOX (Fold’g Rly), AT LEVER Key Sol, ICM BOX (Turn Signal Sound)
7 71
Maintenance
No.
Fuse rating
Description
Protected component
31
7.5A
MODULE 4
Body Control Module
32
7.5A
MODULE 7
Body Control Module, Smart Key Control Module
33
15A
TCU
M/T : F35 (B/UP LAMP), A/T : Transaxle Range Switch, TCM (D4HB)
34
10A
ABS
ESC Control Module, ABS Control Module
35
7.5A
A/CON 2
A/C Control Module
36
15A
S/HEATER RR
Rear Seat Warmer LH/RH
37
25A
AMP
AMP, DC-DC Converter (With ISG)
38
10A
FOG LAMP RR
ICM Relay Box (Rear Fog Lamp Relay)
Maintenance
72
7
Fuse
Fuse rating
Description
Protected component
MULTI
FUSE
80A
MDPS
MDPS Unit
60A
IP_B+1
Inner Fuse Panel, S/Heater RR, Smart Key 1, 2, P/WDW LH/RH, IPS-1/Arisu-1 (H/Lamp Low RH,
H/Lamp Hi RH, Turn FR/RR), IPS-2 (Int Tail Lamp), IPS-4 (Drl Lamp LH/RH), IPS-3 (Frt Fog Lamp
LH/RH)
40A
ABS_1
ESC Control Module, ABS Control Module
40A
ABS_2
ESC Control Module, ABS Control Module, Multipurpose Check Connector
40A
IGN_2
W/O Smart Key : Ignition Switch, START RELAY, Starter Fuse No: 26 With Smart Key : IG2 RELAY,
START RELAY, IG2 Fuse No: 11, 12, 18, 20, 33
60A
IP_B+2
Inner Fuse Panel, P/seat DRV, Spare3, Fog Lamp RR, IPS-5/Arisu-2 (H/Lamp Low LH, H/Lamp Hi LH,
Turn FL/RL), IPS-6 (EXT Tail Lamp LH/RH)
40A
RR HTD
RR HTD RELAY RR HTD, MIRR HTD
40A
BLOWER
BLOWER RLY, BLOWER MOTOR
FUSE
40A
IG1
W/O Smart Key : Ignition Switch
With Smart Key : IG1 RELAY, ACC RELAY, INNER FUSE PANEL
(ACC Fuse No: 5, 6,10 IG1 Fuse No: 8,17,19, 23, 24, 30, 32, 34, 35)
30A
EPB_1
Electric Parking Brake Module
Engine compartment main fuse panel
7 73
Maintenance
Fuse
Fuse rating
Description
Protected component
FUSE
30A
EPB_2
Electric Parking Brake Module
50A
C/FAN
C/FAN LO RELAY, C/FAN HI RELAY, C/FAN MOTOR
15A
DEICER
DEICER RELAY
15A
STOP LAMP
SSEM,STOP LAMP
40A
EMS
EMS Box (FUSE No. - 1/2/3/4/5/6/7/8/9)
50A
B+3
Inner Fuse Panel (Leak Current Autocut Device, Fuse No. - 4/9/14/16/21/22/25/27/31/38)
25A
FRT_WIPER_LH
FRT WIPER LH
25A
FRT_WIPER_RH
FRT WIPER RH
10A
B/UP LP
M/T : Back-up Lamp Switch, A/T : Transaxle Range Switch, TCU
15A
ECU4
ECU
50A
B+4
FRT WIPER LH/RH , ECU4
10A
BRAKE_SWITCH
STOP SIGNAL
20A
H/LP_WASHER
Head Lamp Washer Relay, Head Lamp Washer
30A
P/OUTLET 2
P/OUTLET RELAY 2
7.5A
SPARE
SPARE
Maintenance
74
7
Relay Name
Type
COOLING FAN LOW RELAY
H/C MICRO
COOLING FAN HIGH RELAY
3725
BLOWER RELAY
H/C MICRO
REAR DEFOGGER RELAY
H/C MICRO
B/START (IG1) RELAY
H/C MICRO
B/START (IG2) RELAY
H/C MICRO
START RELAY
H/C MICRO
B/START (ACC) RELAY
H/C MICRO
DEICER RLY
ISO MICRO
F/FUMP RLY
H/C MICRO
H/LP WASHER RLY
ISO MICRO
P/OUTLET2 RLY
ISO MICRO
Fuse rating
Description
Relay Name
10A
B/A HORN
B/ALARM HORN RLY
15A
ECU3
ECU
15A
HORN
Horn
10A
INJECTOR
INJECTOR, ECU,
FUEL PUMP RELAY
10A
ECU2
ECU
20A
IGN COIL
Ignition Coil #1/#2/#3/#4, Condenser
10A
SENSOR2
E/R Fuse & Relay Box (COOLING LOW
RELAY), Oil Control Valve #1/#2
20A
ECU1
ECU
10A
SENSOR1
Oxygen Sensor (UP/DOWN), Variable
Intake Solenoid Valve, Purge Control
Solenoid Valve
10A
SPARE
SPARE
15A
SPARE
SPARE
20A
SPARE
SPARE