Kia Optima - 2014 Fuse Box Diagram

Kia Optima - 2014 Fuse Box Diagram

3 41
Safety features of your vehicle
NOTICE
Before you replace a fuse or discon-
nect a battery terminal, turn the
ignition switch to the LOCK
posi-
tion and remove the ignition key.
Never remove or replace the air bag
related fuse(s) when the ignition
switch is in the ON position. Failure
to heed this warning will cause the
SRS air bag warning light to illumi-
nate.
Occupant detection system
Your vehicle is equipped with an
occupant detection system in the
front passenger's seat.
The occupant detection system is
designed to detect the presence of a
properly-seated front passenger and
determine if the passenger's front air
bag should be enabled (may inflate)
or not.The driver's front air bag is not
affected or controlled by the occu-
pant detection system.
B240B05L
Passenger’s front air bag
WARNING
- Air bag
obstructions
Do not install or place any
accessories on the steering
wheel, instrument panel, or on
the front passenger's panel
above the glove box in a vehicle
Such objects may become dan-
gerous projectiles if the air bag
deploys.
OTF034084N
4 29
Features of your vehicle
Power window lock button
(if equipped)
The driver can disable the power
window switches on the rear passen-
gers' doors by pressing the power
window lock switch to the lock posi-
tion (pressed).
When the power window lock
switch is pressed:
• The driver's master control can
operate all the power windows.
• The front passenger's control
can operate the front passen-
ger's power window.
• The rear passenger's control
cannot operate the rear passen-
ger's power window.
Always double check to make sure
all arms, hands, head and other
obstructions are safely out of the way
before closing a window.
CAUTION
- Opening / closing Window
To prevent possible damage to
the power window system, do
not open or close two windows
or more at the same time. This
will also ensure the longevity of
the fuse.
WARNING -
Power
windows
Do not allow children to play
with the power windows. Keep
the driver’s door power window
lock switch in the LOCK posi-
tion (pressed).
OTF040023
Features of your vehicle
38
4
Sunshade
• To open the sunshade, pull the
sunroof control lever backward to
the first detent position.
• To close the sunshade when the
sunroof glass is closed, push the
sunroof control lever forward.
To stop the sliding at any point, pull
or push the sunroof control lever
momentarily.
NOTICE
It is normal for wrinkles to form on
the blind because of its material
characteristic.
Resetting the sunroof
Whenever the vehicle battery is dis-
connected or discharged, or related
fuse is blown, you must reset your
sunroof system as follows:
1.Turn the ignition switch to the ON
position and close the sunroof
completely.
2.Release the control lever.
3.Push and hold the control lever for-
ward (for more than 10 seconds)
until the sunroof tilts and slightly
moves. Then, release the lever.
4.Push the sunroof control lever for-
ward in the direction of close until
the sunroof operates as follows:
SUNSHADE OPEN
TILT OPEN
SLIDE OPEN
SLIDE CLOSE
SUNSHADE CLOSE
Then, release the control lever.
When this is complete, the sunroof
system is reset.
For more detailed information,
contact
an authorized Kia dealer.
NOTICE
If the sunroof is not reset when the
vehicle battery is disconnected or
discharged, or related fuse is blown,
the sunroof may operate improperly.
OYF049214
4 63
Features of your vehicle
To reset the service interval to the
mileage and days you inputted
before:
- Press the SELECT/RESET button
OK for more than 1 second.
Service in OFF
If the service interval is not set,
"Service in OFF" message is dis-
played on the LCD display.
NOTICE
If any of the following conditions
occurs, the mileage and days may be
incorrect.
-
The battery cable is disconnected.
-
The fuse switch is turned off.
-
The battery is discharged.
OTF044414L
OTF044192L
Type A
Type B
Features of your vehicle
72
4
Check BRAKE SWITCH fuse
(for smart key system and auto-
matic transaxle)
• This warning message illuminates
if the brake switch fuse is discon-
nected.
• It means that you should replace
the fuse with a new one. If that is
not possible, you can start the
engine by pressing the Engine
Start/Stop Button for 10 seconds in
the ACC position.
Shift to "P" or "N" to start engine
(for smart key system and auto-
matic transaxle)
• This warning message illuminates
if you try to start the engine with
the shift lever not in the P (Park) or
N (Neutral) position.
OTF044156L
OTF044157L
Type A
Type B
OTF044149L
OTF044150L
Type A
Type B
Features of your vehicle
74
4
Low Washer Fluid
• This warning message illuminates
on the service reminder mode if
the washer fluid level in the reser-
voir is nearly empty.
• It means that you should refill the
washer fluid.
Turn on "FUSE SWITCH"
(if equipped)
• This warning message illuminates
if the fuse switch on the fuse box is
OFF.
• It means that you should turn the
fuse switch on.
For more details, refer to "Fuses" in
chapter 7.
OTF044158L
OTF044159L
Type A
Type B
OTF044153L
OTF044154L
Type A
Type B
4 141
Features of your vehicle
Only use 12V electric accessories
which are less than 10A in electric
capacity.
Adjust the air-conditioner or heater to
the lowest operating level when
using the power outlet.
Close the cover when not in use.
Some electronic devices can cause
electronic interference when plugged
into a vehicle’s power outlet. These
devices may cause excessive audio
static and malfunctions in other elec-
tronic systems or devices used in
your vehicle.
Digital clock
Whenever the battery terminals or
related fuses are disconnected, you
must reset the time.
When the ignition switch is in the
ACC or ON position, the clock but-
tons operate as follows:
WARNING -
Electric
shock
Do not put a finger or a foreign
element (pin, etc.) into a power
outlet and do not touch with a
wet hand. You may get an elec-
tric shock.
WARNING
Do not adjust the clock while
driving.You may lose your steer-
ing control and cause severe
personal injury or accidents.
OTF044368
OTF044356
Type A
Type B
5 13
Driving your vehicle
• If the battery is weak or the smart
key does not work correctly, you
can start the engine by pressing
the engine start/stop button with
the smart key.
The side with the lock button
should
contact
the
engine
start/stop button directly.
When you press the engine
start/stop button directly with the
smart key, the smart key should
contact the button at a right angle.
When the stop lamp fuse is blown,
you can't start the engine normally.
Replace the fuse with a new one. If
it is not possible, you can start the
engine by pressing the ENGINE
START/STOP button for 10 sec-
onds
while it is in the ACC posi-
tion. The engine can start without
depressing the brake pedal. But for
your safety always depress the
brake pedal before starting the
engine.
Do not press the ENGINE START/
STOP button for more than 10 sec-
onds except when the stop lamp fuse
is blown.
OTF054006
7 3
Maintenance
ENGINE COMPARTMENT
1. Engine coolant reservoir
2. Engine oil filler cap
3. Brake fluid reservoir
4. Air cleaner
5. Fuse box
6. Positive battery terminal
7. Negative battery terminal
8. Windshield washer fluid reservoir
9. Radiator cap
10. Engine oil dipstick
OTF074002N/OYF071200N
2.4L Engine
2.0L Engine
* The actual engine room in the vehicle may differ from the illustration.
7 61
Maintenance
FUSES
A vehicle’s electrical system is pro-
tected from electrical overload dam-
age by fuses.
This vehicle has 2 fuse panels, one
located in the driver’s side panel bol-
ster, the other in the engine compart-
ment near the battery.
If any of your vehicle’s lights, acces-
sories, or controls do not work, check
the appropriate circuit fuse. If a fuse
has blown, the element inside the
fuse will melt.
If the electrical system does not
work, first check the driver’s side
fuse panel.
Before replacing a blown fuse, dis-
connect the negative battery cable.
Always replace a blown fuse with
one of the same rating.
If the replacement fuse blows, this
indicates an electrical problem. Avoid
using the system involved and imme-
diately consult an authorized Kia
dealer.
Three kinds of fuses are used: blade
type for lower amperage rating, car-
tridge type, and multi fuse for higher
amperage ratings.
WARNING
- Fuse replace-
ment
Never replace a fuse with any-
thing but another fuse of the
same rating.
• A higher capacity fuse could
cause damage and possibly a
fire.
• Never install a wire or alu-
minum foil instead of the
proper fuse - even as a tem-
porary repair. It may cause
extensive wiring damage and
a possible fire.
CAUTION
- Fuse replace-
ment
Do not use a screwdriver or any
other metal object to remove
fuses because it may cause a
short circuit and damage the
system.
OLM079051N
Normal
Normal
Blade type
Cartridge type
Multi fuse
Main fuse
Blown
Blown
Normal
Blown
Normal
Blown
Maintenance
62
7
NOTICE
The actual fuse/relay panel label
may differ from equipped items.
Instrument panel fuse replace-
ment
1. Turn the ignition switch and all
other switches off.
2. Open the fuse panel cover.
CAUTION
When replacing a blown fuse
or relay with a new one, make
sure the new fuse or relay fits
tightly into the clips The
incomplete fastening fuse or
relay may cause the vehicle
wiring and electric systems
damage and a possible fire.
Do not remove fuses, relays
and terminals fastened with
bolts or nuts.The fuses, relays
and terminals may be fas-
tened incompletely, and it may
cause a possible fire. If fuses,
relays and terminals fastened
with bolts or nuts are blown,
we recommend that you con-
sult with an authorized Kia
dealer.
Do not input any other objects
except fuses or relays into
fuse/relay terminals such as a
driver or wiring. It may cause
contact failure and system
malfunction.
OTF074017
7 63
Maintenance
3. Pull the suspected fuse straight
out. Use the fuse puller provided in
the engine compartment fuse
panel.
4. Check the removed fuse; replace it
if it is blown.
5. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips.
If it fits loosely, consult an authorized
Kia dealer.
If you do not have a spare, use a fuse
of the same rating from a circuit you
may not need for operating the vehi-
cle, such as the cigar lighter fuse.
If the headlights or other electrical
components do not work and the
fuses are OK, check the fuse block in
the engine compartment. If a fuse is
blown, it must be replaced.
Fuse switch
Always, put the fuse switch at the ON
position.
If you move the switch to the OFF
position, some items such as audio
and digital clock must be reset and
transmitter (or smart key) may not
work properly.
OTF070018
OTF074019
Maintenance
64
7
NOTICE
If you need to park your vehicle for
prolonged periods more than 1
month, move the transportation fuse
switch to the OFF position to pre-
vent the battery being discharged.
Engine compartment panel fuse
replacement
1. Turn the ignition switch and all
other switches off.
2. Remove the fuse box cover by
pressing the tap and pulling up the
cover.
3. Check the removed fuse; replace it
if it is blown. To remove or insert
the fuse, use the fuse puller in the
engine compartment fuse panel.
4. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips. If it fits loosely, consult
an authorized Kia dealer.
OTF074020N
CAUTION
- Fuse panel
covers
After checking the fuse panel in
the
engine
compartment,
securely install the fuse panel
cover to prevent electrical fail-
ures which may occur from
water leaking in.
CAUTION
• Always place the transporta-
tion fuse switch in the ON posi-
tion while driving the vehicle.
Do not move the transportation
fuse switch repeatedly. The
fuse switch may be worn out.
7 65
Maintenance
Main fuse
If the main fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery
cable.
3. Remove the nuts shown in the pic-
ture above.
4. Replace the fuse with a new one
of the same rating.
5. Reinstall in the reverse order of
removal.
Multi fuse
If the multi fuse is blown, it must be
removed as follows:
1. Remove the fuse panel in the
engine compartment.
2. Remove the nuts shown in the pic-
ture above.
3. Replace the fuse with a new one
of the same rating.
4. Reinstall in the reverse order of
removal.
OTF070021
OVG079022
Maintenance
66
7
Instrument fuse panel
NOTICE
Not all fuse panel descriptions in
this manual may be applicable to
your vehicle. It is accurate at the
time of printing. When you inspect
the fuse panel in your vehicle, refer
to the fuse panel label.
OTF074084N
OTF070023
Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing fuse/relay name and capacity.
7 67
Maintenance
Inner Fuse panel
Description
Fuse Rating
Protected Component
MULTIMEDIA
15A
ISG LDC AUDIO,AUDIO_UVO, AUDIO(PA30A,B), NAVI1.5, NAVI_3.0, NAVI_4.0, TMU
PDM 1
25A
Smart Key Control Module (With Smart Key)
SPARE
10A
-
PDM2
10A
SMK UNIT, BUTTON START SW
P/SEAT(PASS)
20A
Passenger Seat Manual Switch
AMP
30A
AMP
P/SEAT(DRV)
30A
Driver IMS Module, Driver Seat Manual Switch, Driver Lumbar Support Switch (2WAY)
MEMORY 2
7.5A
PIC_RF_RECEIVER
TRUNK
10A
Trunk Lid Relay, Trunk Room Lamp
MODULE 7
10A
SPORT_MODE_SW, RR POWER WINDOW SW
DR LOCK
20A
Door Lock/Unlock Relay, Dead Lock Relay (RHD), Turn Signal Lamp Sound Relay
S/HEATER(RR)
20A
Rear Seat Warmer Relay LH/RH
P/WDW(RH)
25A
Driver Safety Power Window Module (RHD), Passenger Safety Power Window Module (LHD),
Rear Safety Power Window Module RH, Power Window RH Relay
P/WDW(LH)
25A
Driver Safety Power Window Module (LHD), Passenger Safety Power Window Module (RHD),
Rear Safety Power, Window Module LH, Power Window LH Relay
MODULE 2
10A
BCM, Panorama Sunroof, Rain Sensor
Maintenance
68
7
Description
Fuse Rating
Protected Component
BRAKE SWITCH
10A
Smart Key Control Module, Start Stop Button Switch, FOB Holder, Stop Lamp Switch
MEMORY 1
10A
SEAT EXTN (IMS), DR_TRIM_EXTN (FOLD’G), CLUSTER, A/CON, ECM, AUTO FOLDING RLY,
TPMS, POWER OUTLET, A_L_PHOTO_SNSR, MUT
SUNROOF
20A
Panorama Sunroof
S/HEATER(FRT)
SEAT VERNT(FRT)
20A
SEAT_EXTN (HEAT/VENT)
SPARE
10A
-
A/BAG IND
10A
Instrument Cluster
MODULE 3
10A
Sport Mode Switch, Key Solenoid (W/O Smart Key)
MODULE 4
10A
Driver/Passenger CCS Control Module (With CCS), Driver/Passenger Seat Warmer Module (W/O
CCS), Front Seat Warmer & CCS Switch, Oil Pump Inverter, ISG Low DC-DC Converter, Tire Pressure
Monitoring Module
A/BAG
15A
A/BAG UNIT IG1 , WCS_PASS IG1
INTERIOR LAMP
10A
Driver/Passenger Smart Key Outside Handle (With Smart Key), Driver/Passenger Door Lamp, A/C
Control Module, Ignition Key ILL. & Door Warning Switch (W/O Smart Key), RF Receiver (With Smart
Key), Driver IMS Module, BCM, Data Link Connector, Driver/Passenger Door Scuff Lamp, Power
Outside Mirror Switch, Auto Light & Photo Sensor (W/O B/Alarm), Lamp Auto Cut Relay, Instrument
Cluster
CLUSTER
10A
CLUSTER (IGN1)
MDPS
7.5A
Crash Pad Switch, EPS Control Module (With MDPS), Steering Angle Sensor (W/O MDPS),
ATM Lever Indicator, EPB Switch, EPB Control Module
PDM 3
7.5A
Smart Key Control Module (With Smart Key)
7 69
Maintenance
Description
Fuse Rating
Protected Component
EPB
10A
EPB
SPARE
20A
-
IG 1
25A
E/R BOX IG1
SPARE
10A
-
POWER OUTLET
20A
Front Power Outlet
MODULE 1
10A
Auto Head Lamp Leveling Device Module (Auto HLLD), Head Lamp Leveling Device Switch (Manual
HLLD), Head Lamp Leveling Device Actuator LH/RH, BCM, Front Smart Parking Assist Sensor Module,
Instrument Cluster, Electro Chromic Mirror, A/C Control Module, Driver IMS Module, Rear Parking
Assist Buzzer, Lane Keeping Assist Module
START
7.5A
B/ALARM RLY
HTD STRG
15A
Steering Wheel Heater
MODULE 5
7.5A
Smart Key Control Module (With Smart Key), Rear Seat, Warmer Relay LH/RH, E/R Fuse & Relay Box
(RLY.2), Diesel Box (Fuel Filter Relay)
A/CON
7.5A
A/C Control Module, E/R Fuse & Relay Box (RLY.14)
SPARE
15A
-
WIPER
25A
E/R BOX WIPER RLY
C/LIGHTER
20A
Cigarette Lighter
MODULE 6
7.5A
PANORAMA SUNROOF (IG2), IONIZER, DSL_BOX, RR_SEAT_WARMER
HTD MIRR
10A
Driver/Passenger Power Outside Mirror
Maintenance
70
7
Engine compartment fuse
panel (for Theta 2.4 GDI)
NOTICE
Not all fuse panel descriptions in
this manual may be applicable to
your vehicle. It is accurate at the
time of printing. When you inspect
the fuse panel in your vehicle, refer
to the fuse panel label.
OTF074086N
OVG079025L
7 71
Maintenance
Engine Compartment fuse
panel (for theta 2.4 GDI)
Description
Fuse Rating
Protected Component
RR HTD
40A
E/R BOX RR HTD RLY COIL
HORN
15A
HORN (LH, RH)
F/PUMP
20A
FUEL PUMP MTR
ECU 3
15A
PCU (GDI) BATT. DIRECT
SENSOR 1
15A
DN O2 SENSOR (GDI), UP O2 SENSOR (GDI)
INJECTOR
10A
E/R BOX F/PUMP RLY COIL
SENSOR 3
10A
CMP1, 2 (GDI, TGDI), SMATRA IMMOBILIZER
SENSOR 2
10A
CKP (GDI), VIS (GDI), OCV1, 2 (GDI), PCSV (GDI), CCV (GDI)
IGN COIL
20A
ENGINE IG COIL
ECU 1
30A
ECU RLY
SPARE
10A
-
SPARE
15A
-
SPARE
20A
-
WIPER
10A
BCM, RAIN SNSR, WIPER MTR
AMS
10A
BATTERY SENSOR
Maintenance
72
7
Description
Fuse Rating
Protected Component
TCU 1
20A
TCU
STOP LAMP
15A
RLY.10 (HAC Relay), STOP LAMP RELAY
DEICER
20A
RLY.7 (Deicer Relay)
IG1
40A
IGN SW
B+ 1
50A
B+
B+ 2
60A
B+
BLOWER
40A
RLY.14 (Blower Relay)
IG 2
40A
IGN SW, IG2 RLY
ESC 1
40A
ESP UNIT MOTOR B+, DIAGNOSIS ABS A/B VALVE B+
ESC 2
40A
ESP UNIT SOLENOID B+
RR HTD
40A
RLY.1 (RR HTD Relay)
B+ 3
60A
B+
MDPS
80A
EPS Control Module
SPARE
25A
-
C/FAN
50A
E/R BOX C/FAN1 RLY SWITCH
INVERTER
50A
O_P_INVERTER
EPB 2
30A
EPB UNIT BATT2
7 73
Maintenance
Description
Fuse Rating
Protected Component
EPB 1
30A
EPB UNIT BATT1
ECU 2
40A
EMS BOX (B+)
ECU 4
10A
ENGINE ECU
TCU 2
15A
SPEED SNSR, POSITION SW, O_P_INVERTER
ESC 3
10A
ESP UNIT IGN1
B/UP LAMP
10A
ELECTRO CHROMIC MIRROR, BCM, REAR COMBINATION LAMP (IN) LH/RH
A/CON
10A
A/C CONTROL MODULE (Auto A/C)
Maintenance
74
7
Engine compartment fuse
panel (for Theta 2.0 T-GDI)
NOTICE
Not all fuse panel descriptions in
this manual may be applicable to
your vehicle. It is accurate at the
time of printing. When you inspect
the fuse panel in your vehicle, refer
to the fuse panel label.
OVG079025L
OTF074086L
7 75
Maintenance
Description
Fuse Rating
Protected Component
RR HTD
-
E/R BOX RR HTD RLY COIL
HORN
15A
HORN (LH, RH)
F/PUMP
20A
FUEL PUMP MTR
ECU 3
15A
PCU (TGDI) BATT. DIRECT
SENSOR 1
15A
DN O2 SENSOR (TGDI), UP O2 SENSOR (TGDI), COOLING FAN RLY COIL (TGDI)
INJECTOR
10A
E/R BOX F/PUMP RLY COIL
SENSOR 3
10A
CMP1, 2 (TGDI), SMATRA IMMOBILIZER
SENSOR 2
10A
CKP (TGDI), VIS (GDI), OCV1, 2 (TGDI), PCSV (TGDI), RCV (TGDI)
IGN COIL
20A
ENGINE IG COIL
ECU 1
30A
ECU RLY
SPARE
10A
-
SPARE
15A
-
SPARE
20A
-
WIPER
10A
BCM, RAIN SNSR, WIPER MTR
VACUUM PUMP
20A
BRAKE VACUUM PUMP IG1
AMS
10A
BATTERY SENSOR
Engine Compartment fuse
panel (for theta 2.0 T- GDI)
Maintenance
76
7
Description
Fuse Rating
Protected Component
TCU 1
20A
TCU
STOP LAMP
15A
RLY.10 (HAC Relay), STOP LAMP RELAY
DEICER
20A
RLY.7 (Deicer Relay)
IG1
40A
IGN SW
B+ 1
50A
B+
B+ 2
60A
B+
C/ FAN 2
60A
C/FAN RLY
IG 2
40A
IGN SW, IG2 RLY
ESC 1
40A
ESP UNIT MOTOR B+ , DIAGNOSIS ABS A/B VALVE B+
ESC 2
40A
ESP UNIT SOLENOID B+
RR HTD
40A
RLY.1 (RR HTD Relay)
B+ 3
60A
B+
MDPS
80A
EPS CONTROL MODULE
SPARE
25A
-
C/FAN 1
50A
COOLING FAN RLY TGDI
BLOWER
40A
E/R BOX BLOWER RLY SWITCH
7 77
Maintenance
Description
Fuse Rating
Protected Component
EPB 2
30A
EPB UNIT BATT2
EPB 1
30A
EPB UNIT BATT1
ECU 2
40A
EMS BOX (B+)
ECU 4
10A
ENGINE ECU
TCU 2
15A
SPEED SNSR, POSITION SW, O_P_INVERTER
ESC 3
10A
ESP UNIT IGN1
B/UP LAMP
10A
ELECTRO CHROMIC MIRROR, BCM, REAR COMBINATION LAMP (IN) LH/RH
A/CON
10A
A/C CONTROL MODULE (Auto A/C)
Maintenance
78
7
Engine room
(Battery terminal cover)
NOTICE
Not all fuse panel descriptions in
this manual may be applicable to
your vehicle. It is accurate at the
time of printing. When you inspect
the fuse panel in your vehicle, refer
to the fuse panel label
OTF074089N
OVG079026
7 79
Maintenance
LIGHT BULBS
Use only the bulbs of the specified
wattage.
If you don’t have necessary tools, the
correct bulbs and the expertise, con-
sult an authorized Kia dealer. In
many cases, it is difficult to replace
vehicle light bulbs because other
parts of the vehicle must be removed
before you can get to the bulb.This is
especially true if you have to remove
the headlight assembly to get to the
bulb(s).
Removing/installing
the
headlight assembly can result in
damage to the vehicle.
Headlight, position light, turn
signal light, side marker light,
and front fog light bulb
replacement
WARNING
- Lights
Prior to working on the light,
firmly apply the parking brake,
ensure that the ignition switch
is turned to the “LOCK”position
and turn off the lights to avoid
burning your fingers or receiv-
ing an electric shock.
CAUTION
- Light
replacement
Be sure to replace the burned-
out bulb with one of the same
wattage rating.
Otherwise,
it
may cause damage to the fuse
or electric wiring system.
OTF074027N
OTF074090N