Kia Soul - 2014 Fuse Box Diagram

Kia Soul - 2014 Fuse Box Diagram

3 47
Safety features of your vehicle
Occupant Detection System
(ODS)
Your vehicle is equipped with an
occupant detection system in the
front passenger's seat.
The occupant detection system is
designed to detect the presence of a
properly-seated front passenger and
determine if the passenger's front air
bag should be enabled (may inflate)
or not. Only the front passenger front
air bag is controlled by the Occupant
Detection System.
WARNING
• If an air bag deploys, there
may be a loud noise followed
by a fine dust released in the
vehicle.
These conditions are
normal and are not hazardous
- the air bags are packed in this
fine powder.
The dust generat-
ed during air bag deployment
may cause skin or eye irrita-
tion as well as aggravate asth-
ma for some persons. Always
wash all exposed skin areas
thoroughly
with
lukewarm
water and a mild soap after an
accident in which the air bags
were deployed.
(Continued)
(Continued)
• The SRS can function only
when the ignition switch is in
the ON position. If the SRS air
bag warning light does not
illuminate,
or continuously
remains on after illuminating
for about 6 seconds when the
ignition switch is turned to the
ON position,
or after the
engine is started, comes on
while driving, the SRS is not
working
properly.
If
this
occurs,
have your vehicle
immediately inspected by an
authorized Kia dealer.
• Before you replace a fuse or
disconnect a battery terminal,
turn the ignition switch to the
LOCK position and remove the
ignition switch. Never remove
or replace the air bag related
fuse(s)
when
the
ignition
switch is in the ON position.
Failure to observe this warning
will cause the SRS air bag
warning light to illuminate.
OPS033020
WARNING
Do not put anything in front of the
passenger air bag
indicator.
Features of your vehicle
30
4
Power window lock button
• The driver can disable the power
window switches on the passenger
doors by pressing the power win-
dow lock button located on the dri-
ver’s door to the LOCK position
(pressed).
When the power window lock
switch is pressed :
- The driver's master control can
operate all the power windows.
- The front passenger's control can
operate the front passenger's
power window.
- The rear passenger's control can-
not operate the rear passenger's
power window.
OPS043023
CAUTION
• To prevent possible damage
to the power window system,
do not open or close two win-
dows or more at the same
time. This will also ensure the
longevity of the fuse.
• Never try to operate the main
switch on the driver's door
and the individual door win-
dow switch in the opposite
directions at the same time. If
this is done, the window will
stop and cannot be opened or
closed.
4 63
Features of your vehicle
Service Mode
Service Interval
Service in
It calculates and displays when you
need a scheduled maintenance
service (mileage or days).
If the remaining mileage or time
reaches 1,500 km (900 mi.) or 30
days, "Service in" message is dis-
played for several seconds each time
you set the ignition switch or Engine
Start/Stop Button to the ON position.
Service required
If you do not have your vehicle serv-
iced according to the already inputted
service interval, “Service required”
message is displayed for several sec-
onds each time you set the ignition
switch or Engine Start/Stop Button to
the ON position (The mileage and
time changes to "---").
To reset the service interval to the
mileage and days you inputted before:
- Press the RESET button
for
more than 1 second.
Service in OFF
If the service interval is not set,
“Service in OFF” message is dis-
played on the LCD display.
NOTICE
If any of the following conditions
occurs, the mileage and days may be
incorrect.
-
The battery cable is disconnected.
-
The fuse switch is turned off.
-
The battery is discharged.
OPS043134C
OTF044196L
OTF044192L
4 69
Features of your vehicle
Press start button again
(for smart key system)
• This warning message illuminates
if you can not operate the Engine
Start/Stop Button when there is a
problem with the Engine Start/Stop
Button system.
• It means that you could start the
engine by pressing the Engine
Start/ Stop Button once more.
• If the warning illuminates each
time
you
press
the
Engine
Start/Stop Button, have your vehi-
cle inspected by an authorized Kia
dealer.
Press start button with smart key
(for smart key system)
• This warning message illuminates
if you press the Engine Start/Stop
Button while the warning message
“Key not detected” is illuminating.
At this time, the immobilizer indica-
tor light blinks.
Check fuse "BRAKE SWITCH"
(for smart key system and auto-
matic transaxle)
• This warning message illuminates
if the brake switch fuse is discon-
nected.
• It means that you should replace
the fuse with a new one. If that is
not possible, you can start the
engine by pressing the Engine
Start/Stop Button for 10 seconds in
the ACC position.
OTF044146L
OTF044144L
OTF044157L
4 71
Features of your vehicle
Sunroof Open (if equipped)
• The warning message illuminates
if you turn off the engine when the
sunroof is open.
Turn on "FUSE SWITCH"
(if equipped)
• This warning message illuminates
if the fuse switch on the fuse box is
OFF.
• The "FUSE" and "on" warning
messages are displayed alternate-
ly. (for Type A)
• It means that you should turn the
fuse switch on.
For more details, refer to “Fuses” in
chapter 7.
OPS043120
OPS044309L
OPS043405L
Type A
Type B
Driving your vehicle
14
5
NOTICE
If the battery is weak or the smart
key does not work correctly, you
can start the engine by pressing
the engine start/stop button with
the smart key.
The side with the lock button
should
contact
the
engine
start/stop button directly.
When
you
press
the
engine
start/stop button directly with the
smart key, the smart key should
contact the button at a right angle.
(Continued)
(Continued)
When the stop lamp fuse is blown,
you can't start the engine normal-
ly. Replace the fuse with a new
one. If it is not possible, you can
start the engine by pressing the
ENGINE START/STOP
button
for 10 seconds
while it is in the
ACC position. The engine can
start without depressing the brake
pedal. But for your safety always
depress the brake pedal before
starting the engine.
CAUTION
Do not press the ENGINE
START/ STOP button for more
than 10 seconds except when
the stop lamp fuse is blown.
OPS053007
7 3
Maintenance
ENGINE COMPARTMENT
OPS073001
1. Windshield washer fluid reservoir
2. Engine oil filler cap
3. Engine oil dipstick
4. Engine coolant reservoir
5. Radiator cap
6. Brake fluid reservoir
7. Positive battery terminal
8. Negative battery terminal
9. Fuse box
10. Air cleaner
* The actual engine compartment in the vehicle may differ from the illustration.
1.6L GDI
Maintenance
4
7
OPS073002
* The actual engine room in the vehicle may differ from the illustration.
1. Engine coolant reservoir
2. Engine oil filler cap
3. Brake fluid reservoir
4. Air cleaner
5. Fuse box
6. Positive battery terminal
7. Negative battery terminal
8. Windshield washer fluid reservoir
9. Radiator cap
10. Engine oil dipstick
* : if equipped
2.0L GDI
Maintenance
62
7
FUSES
A vehicle’s electrical system is pro-
tected from electrical overload dam-
age by fuses.
This vehicle has 2 (or 3) fuse panels,
one located in the driver’s side panel
bolster, the other in the engine com-
partment near the battery.
If any of your vehicle’s lights, acces-
sories, or controls do not work, check
the appropriate circuit fuse. If a fuse
has blown, the element inside the
fuse will
melt.
If the electrical system does not
work, first check the driver’s side
fuse panel.
Always replace a blown fuse with
one of the same rating.
If the replacement fuse blows, this
indicates an electrical problem. Avoid
using the system involved and imme-
diately consult an authorized Kia
dealer.
Three kinds of fuses are used: micro
mini type for lower amperage rating,
cartridge type, and multi fuse for
higher amperage ratings.
WARNING
-
Fuse
replacement
Never replace a fuse with any-
thing but another fuse of the
same rating.
• A higher capacity fuse could
cause damage and possibly a
fire.
• Never install a wire or alu-
minum foil instead of the
proper fuse - even as a tem-
porary repair. It may cause
extensive wiring damage and
a possible fire.
Replace the fuse with the igni-
tion “OFF”, switch off of all
electrical devices and then
separation (-) terminal from
the battery in a safe place.
OLM079051N
Normal
Normal
Blade type
Cartridge type
Multi fuse
Blown
Blown
Normal
Blown
Normal
Blown
7 63
Maintenance
NOTICE
The actual fuse/relay panel label
may differ from equipped items.
Inner panel fuse replacement
1. Turn the ignition switch and all
other switches off.
2. Open the fuse panel cover.
OPS073014
CAUTION
Do not use a screwdriver or any
other metal object to remove
fuses because it may cause a
short circuit and damage the
system.
CAUTION
• When replacing a blown fuse
or relay with a new one, make
sure the new fuse or relay fits
tightly into the clips The
incomplete fastening fuse or
relay may cause the vehicle
wiring and electric systems
damage and a possible fire.
• Do not remove fuses, relays
and terminals fastened with
bolts or nuts.The fuses, relays
and terminals may be fas-
tened incompletely, and it may
cause a possible fire. If fuses,
relays and terminals fastened
with bolts or nuts are blown,
we recommend that you con-
sult with an authorized Kia
dealer.
Do not input any other objects
except fuses or relays into
fuse/relay terminals such as a
driver or wiring. It may cause
contact failure and system
malfunction.
Maintenance
64
7
3. Pull the suspected fuse straight
out. Use the fuse puller provided
on the
engine compartment fuse
panel cover.
4. Check the removed fuse; replace it
if it is blown.
Spare fuses are provided in the
engine compartment fuse panel.
5. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips.
If it fits loosely, consult an authorized
Kia dealer.
If you do not have a spare, use a
fuse of the same rating from a circuit
you may not need for operating the
vehicle, such as the power outlet
fuse.
If the headlights or other electrical
components do not work and the
fuses are OK, check the fuse panel
in the engine compartment. If a fuse
is blown, it must be replaced.
Fuse switch
Always, put the fuse switch at the ON
position.
If you move the switch to the OFF
position, some items such as audio
and digital clock must be reset and
transmitter (or smart key) may not
work properly.
OPS073015
OPS073017
7 65
Maintenance
NOTICE
If you need to park your vehicle for
prolonged periods more than 1
month, move the transportation fuse
switch to the OFF position to pre-
vent the battery being discharged.
Engine compartment fuse
replacement
1. Turn the ignition switch and all
other switches off.
2. Remove the fuse panel cover by
pressing the tab and pulling the
cover up.
3. Check the removed fuse; replace it
if it is blown. To remove or insert
the fuse, use the fuse puller in the
engine compartment fuse panel.
4. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips. If it fits loosely, consult
an authorized Kia dealer.
CAUTION
• Always place the transporta-
tion fuse switch in the ON posi-
tion while driving the vehicle.
Do not move the transportation
fuse switch repeatedly. The
fuse switch may be worn out.
OPS073016
CAUTION
After checking the fuse panel in
the
engine
compartment,
securely install the fuse panel
cover with using cover locking
sound. If not, electrical failures
may occur from water contact.
Maintenance
66
7
Multi fuse
If the multi fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery
cable.
3. Remove the nuts shown in the pic-
ture above.
4. Replace the fuse with a new one
of the same rating.
5. Reinstall in the reverse order of
removal.
NOTICE
If the multi fuse is blown, consult an
authorized Kia dealer.
OPS073039
7 67
Maintenance
Fuse/relay panel description
Inside the fuse/relay panel covers,
you can find the fuse/relay label
describing fuse/relay name and
capacity.
NOTICE
Not all fuse panel descriptions in
this manual may be applicable to
your vehicle. It is accurate at the
time of printing. When you inspect
the fuse panel in your vehicle, refer
to the fuse panel label.
OPS073014
OPS073018
Maintenance
68
7
Inner fuse panel
Description
Fuse rating
Protected component
POWER OUTLET 2
20A
P_OUTLET
ACC
10A
O_S_MIRR_SW, AMP, AUDIO/UVO/AVN 4.0_HEAD UNIT, BCM, TMU, MOOD_LAMP_UNIT,
SMK_UNIT, LDC_AMP(400W), LDC_AMP(200W)
POWER OUTLET 1
25A
C/LIGHT, REAR_P_OUTLET
DRL
10A
BCM(DAY_RUNNNIG_LIGHT_LAMP_POWER)
MODULE 6
7.5A
SUNROOF_MOTOR, LUGGAGE_PORTABLE_LAMP(CHARGE_POWER), SEAT_EXTN_DRV(HEAT-
ED), REAR_SEAT(IGN2)
WIPER FRT 2
25A
FRONT_WIPER_MOTOR(POWER), FRONT_WIPER_RLY(LOW)
WIPER RR
15A
REAR_WIPER_MOTOR, MULTI_FUNCTION_SW(WIPER), REAR_WIPER_RLY,
REAR_WIPER_RLY_COIL,
AMP
30A
AMP, LDC_AMP(400W)
MODULE 5
7.5A
BCM, SMK_UNIT
WIPER FRT 1
10A
MULTI_FUNCTION_SW(WIPER), BCM(WASHER_MOTOR_POWER),
HTD STRG
15A
STEERING_HEATED
A/CON 1
7.5A
AIR_CONTROL_UNIT(MANUAL, AUTO), IONIZER, PTC_RLY_COIL, BLOWER_RLY_COIL
HTD MIRR
10A
OUTSIDE_MIRROR(HEATED), ECU(ELEC. LOAD DEFROST),
AIR_CONTROL_UNIT_MANUAL/AUTO(HEATED_SIGNAL)
7 69
Maintenance
Description
Fuse rating
Protected component
T/GATE OPEN
15A
T/GATE_OPEN_RLY(T/GATE_LATCH_MOTOR), T/GATE_OPEN_RLY_COIL
S/HEATER FRT
20A
FRONT_SEAT_EXTN(HEATED_POWER)
DR LOCK
20A
DOOR_LOCK_RLY, DOOR_LOCK_RLY_COIL, DOOR_UNLOCK_RLY_COIL, DEAD_LOCK_RLY,
DEAD_LOCK_RLY_COIL
A/BAG IND
7.5A
CLUSTER
A/BAG
15A
ACU, WCS_ECU
MODULE 4
10A
I_S_MIRR_ECM, AUTO_HLLD_ECU
STOP LAMP
15A
HAZARD_SW(ESS_INDICATOR_POWER), STOP_SIGNAL_ELECTRONIC_MODULE
MODULE 7
10A
SPORTS_MODE_SW(ATM_SHIFT_LOCK_SOLENOID), KEY_LOCK_SOLENOID
S/HEATER RR
20A
REAR_SEAT(HEATED_POWER)
P/WDW RH
25A
FRONT_P/WINDOW_SW(POWER), P/WINDOW_SAFETY_ECU(POWER)
P/WDW LH
25A
FRONT_P/WINDOW_SW(POWER), P/WINDOW_SAFETY_ECU(POWER)
MODULE 1
10A
BCM, SEAT_EXTN_DRV
BRAKE SWITCH 1
10A
ABS/ESP_UNIT, LDC_AMP(400W)
MODULE 2
10A
LOWER_SW, CENTER_SW, TPMS_UNIT, REAR_PARKING_ASSIST_SYSTEM_SNSR, SMART_PARK-
ING_ASSIST_SYSTEM_SNSR, SMART_PARKING_ASSIST_SYSTEM_UNIT,
AIR_CONTROL_UNIT(MANUAL, AUTO), LANE_DEPARTURE_WARNING_SYSTEM_UNIT,
STOP_LP_SW, WATER_FUEL_SNSR
Maintenance
70
7
Description
Fuse rating
Protected component
MODULE 3
10A
SHIFT_LEVER_MODULE, REAR_SEAT_WARMER_SW, REAR_SEAT_WARMER, DIAGNOSIS, AVN
4.0_HEAD_UNIT, LDC_AMP(200W), TMU, HLLD_SW, HLLD_ACTR, OIL_LEVEL_SNSR,
ECU
7.5A
ENGINE_CONTROL_UNIT, AIR_FLOW_SNSR, START_RLY_COIL, SMK_UNIT, SMATRA_IMMOBI-
LIZATION
I.O.D 2
15A
LDC_AMP(200W), AUDIO/UVO/AVN4.0_HEAD_UNIT, TMU
I.O.D 3
7.5A
OUTSIDE_MIRROR_FOLDING_RLY, OUTSIDE_MIRROR_FOLDING_RLY_COIL, OUTSIDE_MIR-
ROR_UNFOLDING_RLY, OUTSIDE_MIRROR_UNFOLDING_RLY_COIL
CLUSTER
10A
CLUSTER
TCU
15A
SPEED_SNSR (MT), BACK_UP_LAMP_SW, OIL_PUMP_INVERTER, INHIBITOR,
TRANSMISSION_CONTROL_UNIT
I.O.D 4
7.5A
OBDII(POWER), TPMS_UNIT(POWER), CLUSTER, AIR_CONTROL_UNIT(MANUAL, AUTO), BCM,
REAR_PARKING_ASSIST_SYSTEM_BUZZER
SPARE
10A
-
SUNROOF 2
20A
SUNROOF_MOTOR(POWER)
P/SEAT DRV
30A
FRNT_SEAT_EXTN(POWER)
SUNROOF 1
20A
SUNROOF_MOTOR(POWER)
MDPS
7.5A
MDPS_UNIT
A/CON 2
7.5A
AIR_CONTROL_UNIT_MANUAL(MAX_BLOWER), AIR_CONTROL_UNIT_AUTO(BLOWER_MOTOR)
START
7.5A
E/R_FUSE & RELAY_BOX(RELAY - START / SUB START), PDM
7 71
Maintenance
Description
Fuse rating
Protected component
I.O.D 1
7.5A
GLOVE_BOX_LAMP, DOOR_WARNING_SW, OVER_HEAD_CONSOLE_LAMP, PERSONAL_LAMP,
SUNVISOR_LAMP, LUGGAGE_LAMP, PORTABLE_LAMP(DOOR)
PDM 2
7.5A
SMK_UNIT(BATT_CPU), SMATRA_IMMOBILIZATION(BATT)
PDM 1
20A
SMK_UNIT(POWER)
BRAKE SWITCH 2
10A
STOP_LAMP_SW(NORMAL_OPEN), SMK_UNIT
Maintenance
72
7
Engine compartment fuse panel
OPS073013
OPS073019
7 73
Maintenance
Engine compartment fuse panel
Description
Fuse rating
Protected component
IG1
40A
IGN_SW(B1), BUTTON_START_RLY(IG1), BUTTON_START_RLY(ACC)
BLOWER
40A
BLOWER_RLY, BLOWER_MOTOR
RR HTD
40A
REAR_GLASS_HEATED_RLY,
ECU 2
30A
MAIN_RLY, MAIN_RLY_COIL
ECU 3
15A
ECU(AFTER_AIN_RELAY)
IGN COIL
20A
IGNITION_COIL(POWER)
ECU 1
20A
ECU(AFTER_MAIN_RELAY)
SENSOR 1
10A
STOP_LAMP_SW(NORMAL_CLOSE), O2_SNSR, PURGE_CONTROL_SOLENOID_VALVE, OCV,
SENSOR 2
10A
CMP, COOLING_FAN_LOW_RLY_COIL
INJECTOR
10A
-
B/UP LAMP
10A
RR_COMBI_LAMP(BACK_UP_LAMP)
WIPER
10A
ECU(WIPER_SWITCH)
F/PUMP
15A
FUEL_PUMP_MOTOR
HORN
15A
HORN_RLY, HORN_RLY_COIL, HORN
H/LAMP WASHER
20A
HEAD_LAMP_WASHER_RLY, HEAD_LAMP_WASHER_RLY_COIL, HEAD_LAMP_WASHER_MOTOR
Maintenance
74
7
Description
Fuse rating
Protected component
B+ 1
50A
SMART_JUNCTION_BLOCK(B+1)
B+ 2
50A
SMART_JUNCTION_BLOCK(B+2)
B+ 3
50A
SMART_JUNCTION_BLOCK(B+3)
IG2
40A
IGN_SW(IG2), BUTTON_START_RLY(IG2), START_RLY
MDPS
80A
MDPS_UNIT
ALT
125A
ALTERNATOR
TCU
20A
TRANSMISSION_CONTROL_UNIT
DEICER
20A
DEICER
ECU 4
15A
ECU(BATT_DIRECT)
ECU 5
15A
ECU(BATT_DIRECT)
A/CON
10A
A/CON_RLY
C/FAN
40A
COOLING_FAN_MOTOR, SUB_FUEL_PUMP, SUB_FUEL_VALVE
INVERTER
50A
OIL_PUMP_INVERTER
ABS 1
40A
ABS/ESP_UNIT(MOTOR)
ABS 2
30A
ABS/ESP_UNIT(SOLENOID)
7 75
Maintenance
LIGHT BULBS
Use only the bulbs of the specified
wattage.
NOTICE
After driving in heavy rain or wash-
ing, headlight and taillight lenses
could appear frosty. This condition
is caused by the temperature differ-
ence between the lamp inside and
outside.
This is similar to the con-
densation on your windows inside
your vehicle during rain and doesn’t
indicate a problem with your vehi-
cle.
If the water leaks into the lamp
bulb circuitry, have the vehicle
checked by an authorized Kia deal-
er.
WARNING
-
Working on
the lights
Prior to working on the light,
firmly apply the parking brake,
ensure that the ignition switch
is turned to the LOCK position
and turn off the lights to avoid
sudden movement of the vehi-
cle and burning your fingers or
receiving an electric shock.
CAUTION
Be sure to replace the burned-
out bulb with one of the same
wattage rating.
Otherwise,
it
may cause damage to the fuse
or electric wiring system.
CAUTION
• If you don’t have necessary
tools, the correct bulbs and
the
expertise,
consult
an
authorized Kia dealer. In many
cases, it is difficult to replace
vehicle light bulbs because
other parts of the vehicle must
be removed before you can
get to the bulb. This is espe-
cially true if you have to
remove the headlight assem-
bly to get to the bulb(s).
Removing/installing the head-
light assembly can result in
damage to the vehicle.
• Do not install additional bulb
or LED. If you install that, the
lamp may not be operated
properly and fuse box or elec-
tric wiring system may have
problem.