Kia Rio - 2014 Fuse Box Diagram

Kia Rio - 2014 Fuse Box Diagram

3 35
Safety features of your vehicle
B240B05L
Passenger’s front air bag
A fully inflated air bag, in combination
with a properly worn seat belt, slows the
driver's or the passenger's forward
motion, reducing the risk of head and
chest injury.
After complete inflation, the air bag
immediately starts deflating, enabling the
driver to maintain forward visibility and
the ability to steer or operate other con-
trols.
NOTICE
Before you replace a fuse or disconnect
a battery terminal, turn the ignition
switch to the LOCK
position and
remove the ignition key. Never remove
or replace the air bag related fuse(s)
when the ignition switch is in the ON
position. Failure to heed this warning
will cause the SRS air bag warning light
to illuminate.
B240B03L
Driver’s front air bag (3)
WARNING
- Air bag
obstructions
Do not install or place any acces-
sories on the steering wheel,
instrument panel, or on the front
passenger's panel above the glove
box in a vehicle Such objects may
become dangerous projectiles if
the air bag deploys.
4 25
Features of your vehicle
Power window lock button
(if equipped)
The driver can disable the power win-
dow switches on the passenger doors
by pressing the power window lock
switch, located on the driver’s door to
the LOCK position (pressed).
When the power window lock button
is in the LOCK position (pressed),
the driver’s master control cannot
operate the passenger door power
windows.
Always double check to make sure all
arms, hands, head and other obstruc-
tions are safely out of the way before
closing a window.
Manual windows (if equipped)
To raise or lower the window, turn the
window regulator handle clockwise or
counterclockwise.
When closing the windows, make sure
your passenger's arms, hands and body
are safely out of the way.
CAUTION
- Opening /
closing Window
To prevent possible damage to the
power window system, do not open
or close two windows or more at the
same time.This will also ensure the
longevity of the fuse.
WARNING -
Power
windows
Do not allow children to play with
the power windows. Keep the dri-
ver’s door power window lock
switch
in
the
LOCK
position
(pressed).
OUB041020
OSA028222
Features of your vehicle
34
4
Resetting the sunroof
Whenever the vehicle battery is discon-
nected or discharged, or related fuse is
blown, you must reset your sunroof sys-
tem as follows:
1.
Turn the ignition switch to the ON posi-
tion and close the sunroof completely.
2.
Release the control lever.
3. Push and hold the control lever for-
ward (for more than 10 seconds) until
the sunroof tilts and slightly moves.
Then, release the lever.
4.
Within 3 seconds, push and hold the
control lever forward (for more than 5
seconds) until the sunroof is operated
as follows;
TILT DOWN
SLIDE OPEN
SLIDE CLOSE
Then, release the control lever.
When this is complete, the sunroof sys-
tem is reset.
For more detailed information, contact
an authorized Kia dealer.
NOTICE
If the sunroof is not reset when the vehi-
cle battery is disconnected or
dis-
charged, or related fuse is blown, the
sunroof may operate improperly.
Features of your vehicle
66
4
Press start button while turn steering
If the steering wheel does not unlock nor-
mally when the engine start/stop button
is pressed, the warning illuminates for 10
seconds on the LCD display. Also, the
warning chime sounds once and the
engine start/stop button light blinks for 10
seconds.
When you are warned, press the engine
start/stop button while turning the steer-
ing wheel right and left.
Check steering wheel lock system
If the steering wheel does not lock nor-
mally when the engine start/stop button
changes to the OFF position, the warning
illuminates for 10 seconds on the LCD
display. Also, the warning chime sounds
for 3 seconds and the engine start/stop
button light blinks for 10 seconds.
Check stop lamp fuse (if equipped)
When the stop lamp fuse is disconnect-
ed, the warning illuminates for 10 sec-
onds on the LCD display.
Replace the fuse with a new one. If that
is not possible you can start the engine
by pressing the engine start/stop button
for 10 seconds in ACC.
OUB041082
OUB041084
OUB041085
4 99
Features of your vehicle
Power outlet (if equipped)
The power outlet is designed to provide
power for mobile telephones or other
devices designed to operate with vehicle
electrical systems. The devices should
draw less than 10 amps with the engine
running.
Use the power outlet only when the
engine is running and remove the acces-
sory plug after use. Using the accessory
plug for prolonged periods of time with
the engine off could cause the battery to
discharge.
Only use 12V electric accessories which
are less than 10A in electric capacity.
Adjust the air-conditioner or heater to the
lowest operating level when using the
power outlet.
Close the cover when not in use.
Some electronic devices can cause elec-
tronic interference when plugged into a
vehicle’s power outlet. These devices
may cause excessive audio static and
malfunctions in other electronic systems
or devices used in your vehicle.
Shopping bag holder
Do not hang a bag weighing more than
3 kg (7 lbs.). It may cause damage to
the shopping bag holder.
Do not hang the frail objects when you
drive rough road, the objects may be
damaged.
Digital clock and calendar
(if equipped)
Whenever the battery terminals or relat-
ed fuses are disconnected, you must
reset the clock and the calendar.
When the ignition switch is in the ACC or
ON position, the clock buttons operate as
follows:
WARNING
- Electric shock
Do not put a finger or a foreign ele-
ment (pin, etc.) into a power outlet
and do not touch with a wet hand.
You may get an electric shock.
OUB041159
OUB041157
5 11
Driving your vehicle
NOTICE
If the battery is weak or the smart key
does not work correctly, you can start
the engine by pressing the engine
start/stop button with the smart key.
(Continued)
(Continued)
When the stop lamp fuse is blown, you
can't start the engine normally.
Replace the fuse with a new one. If it
is not possible, you can start the
engine by pressing the ENGINE
START/STOP button for 10 seconds
while it is in the ACC position. The
engine can start without depressing
the brake pedal. But for your safety
always depress the brake pedal before
starting the engine.
Do not press the ENGINE START/ STOP
button for more than 10 seconds except
when the stop lamp fuse is blown.
OUB051003
7
Engine compartment / 7-2
Maintenance services / 7-3
Owner maintenance / 7-5
Scheduled maintenance service / 7-7
Explanation of scheduled maintenance items / 7-22
Engine oil / 7-25
Engine coolant / 7-26
Brake/clutch fluid / 7-29
Automatic transaxle fluid / 7-30
Washer fluid / 7-30
Parking brake / 7-31
Air cleaner / 7-31
Climate control air filter / 7-32
Wiper blades / 7-32
Battery / 7-34
Tires and wheels / 7-37
Fuses / 7-49
Appearance care / 7-60
Emission control system / 7-66
Maintenance
Maintenance
2
7
ENGINE COMPARTMENT
1. Engine coolant reservoir
2. Engine oil filler cap
3. Brake/clutch fluid reservoir
4. Air cleaner
5. Fuse box
6. Positive battery terminal
7. Negative battery terminal
8. Windshield washer fluid reservoir
9. Radiator cap
10. Engine oil dipstick
OUB071103N
* The actual engine room in the vehicle may differ from the illustration.
7 49
Maintenance
FUSES
A vehicle’s electrical system is protected
from electrical overload damage by
fuses.
This vehicle has 2 fuse panels, one locat-
ed in the driver’s side panel bolster, the
other in the engine compartment near
the battery.
If any of your vehicle’s lights, acces-
sories, or controls do not work, check the
appropriate circuit fuse. If a fuse has
blown, the element inside the fuse will
melt.
If the electrical system does not work,
first check the driver’s side fuse panel.
Always replace a blown fuse with one of
the same rating.
If the replacement fuse blows, this indi-
cates an electrical problem. Avoid using
the system involved and immediately
consult an authorized Kia dealer.
Three kinds of fuses are used: blade type
for lower amperage rating, cartridge type,
and multi fuse for higher amperage rat-
ings.
NOTICE
The actual fuse/relay panel label may
differ from equipped items.
OTA070039
Blade type
Cartridge type
Fusible link
Blown
Blown
Blown
WARNING
- Fuse replace-
ment
• Never replace a fuse with any-
thing but another fuse of the
same rating.
• A higher capacity fuse could
cause damage and possibly a
fire.
• Never install a wire or aluminum
foil instead of the proper fuse -
even as a temporary repair. It may
cause extensive wiring damage
and a possible fire.
CAUTION
- Fuse replace-
ment
Do not use a screwdriver or any
other metal object to remove fuses
because it may cause a short circuit
and damage the system.
Maintenance
50
7
Instrument panel fuse replacement
1. Turn the ignition switch and all other
switches off.
2. Open the fuse panel cover.
3. Pull the suspected fuse straight out.
Use the removal tool provided in the
engine compartment fuse panel.
4. Check the removed fuse; replace it if it
is blown.
5. Push in a new fuse of the same rating,
and make sure it fits tightly in the clips.
If it fits loosely, consult an authorized Kia
dealer.
If you do not have a spare, use a fuse of
the same rating from a circuit you may
not need for operating the vehicle, such
as the cigar lighter fuse.
If the headlights or other electrical com-
ponents do not work and the fuses are
OK, check the fuse block in the engine
compartment. If a fuse is blown, it must
be replaced.
OUB071019
CAUTION
• When replacing an open fuse or
relay with a new one, make sure
the new fuse or relay fits tightly
into the clips.The incomplete fas-
tening fuse or relay may cause
the vehicle wiring and electric
systems damage and a possible
fire.
Do not remove fuses, relays and
terminals fastened with bolts or
nuts. The fuses, relays and termi-
nals may be fastened incomplete-
ly, and it may cause a possible
fire. If fuses, relays and terminals
fastened with bolts or nuts are
open, consult with an authorized
Kia dealer.
• Do not input any other objects
except
fuses
or
relays
into
fuse/relay terminals such as a
driver or wiring. It may cause con-
tact failure and system malfunc-
tion.
7 51
Maintenance
Memory fuse
Your vehicle is equipped with the memo-
ry fuse to prevent battery discharge if
your vehicle is parked without being
operated for prolonged periods. Use the
following procedures before parking the
vehicle for prolonged periods.
1. Turn off the engine.
2. Turn off the headlights and tail lights.
3. Open the driver’s side panel cover and
pull up the memory fuse.
If the memory fuse is pulled up from the
fuse panel, the warning chime, audio,
clock and interior lamps, etc., will not
operate. Some items must be reset after
replacement. Refer to “Battery” in this
section.
Even though the memory fuse is pulled
up, the battery can still be discharged by
operation of the headlights or other elec-
trical devices.
Engine compartment panel fuse
replacement
1. Turn the ignition switch and all other
switches off.
2. Remove the fuse box cover by press-
ing the tap and pulling up the cover.
3. Check the removed fuse; replace it if it
is blown. To remove or insert the fuse,
use the fuse puller in the engine com-
partment fuse panel.
4. Push in a new fuse of the same rating,
and make sure it fits tightly in the clips.
If it fits loosely, consult an authorized
Kia dealer.
OUB071021
OUB071022
Type B
Maintenance
52
7
Multi fuse
If the multi fuse is blown, consult an
authorized Kia dealer.
Fuse/relay panel description
Inside the fuse/relay panel covers, you
can find the fuse/relay label describing
fuse/relay name and capacity.
NOTICE
Not all fuse panel descriptions in this
manual may be applicable to your vehi-
cle. It is accurate at the time of printing.
When you inspect the fuse panel in your
vehicle, refer to the fuse panel label.
CAUTION
- Fuse panel
covers
After checking the fuse panel in the
engine
compartment,
securely
install the fuse panel cover to pre-
vent electrical failures which may
occur from water leaking in.
OUB071023N
7 53
Maintenance
Instrument panel fuse panel
NOTICE
The actual fuse/relay panel label may
differ from equipped items.
OUB071064N
OUB071025
Maintenance
54
7
Engine compartment fuse panel
NOTICE
The actual fuse/relay panel label may
differ from equipped items.
OUB074063N
OUB071026
7 55
Maintenance
Instrument panel fuse panel
Fuse Name
Fuse rating
Circuit Protected
POWER OUTLET
15A
Power Outlet
C/LIGHTER
20A
Cigarette Lighter
ACC
10A
Front Map Lamp, Power Outside Mirror Switch, BCM,
Low DC-DC Convertor, Smart Key Control Module, Audio,
A/V & Navigation Head Unit, Digital Clock
A/BAG IND
10A
Instrument Cluster
A/BAG
10A
SBR PAB Indicator, SRS Control Module
Passenger Weight Classification Sensor
MODULE 2
10A
BCM
MDPS
10A
EPS Control Module
WIPER RR
15A
Multifunction Switch, Rear Wiper Relay, Rear Wiper Motor
HTD STRG
15A
Steering Wheel Heater
FOG LAMP RR
10A
-
FOG LAMP FRT
15A
Front Fog Lamp Relay
MODULE 1
10A
ATM Shift Lever Switch, Door Warning Switch
STOP LAMP
15A
Data Link Connector, Smart Key Control Module, Stop Lamp Switch
Stop Lamp Relay, PCB Fuse & Relay Box (HAC Relay)
CLUSTER
10A
Audio, BCM, ATM Shift Lever ILL., Crash Pad Switch
Instrument Cluster, Tire Pressure Monitoring Module
IG1 1
10A
Multipurpose Check Connector, Driver CCS Seat Warmer Module
Passenger Seat Warmer Module
With ISG : Crash Pad Switch, Low DC-DC Convertor
ABS
10A
Crash Pad Switch, ESC Module
PCB Fuse & Relay Box (HAC Relay)
B/UP LAMP
10A
Back-Up Lamp Switch
Maintenance
56
7
Fuse Name
Fuse rating
Circuit Protected
IG1 2
10A
Vehicle Speed Sensor, Stop Lamp Switch, Inverter
A/C Control Module
HAZARD
15A
Hazard Switch, BCM
PDM 1
25A
Smart Key Control Module
SUNROOF
15A
Sunroof Motor
PDM 2
10A
Immobilizer Module, Start/Stop Button Switch,
Smart Key Control Module
ECU
15A
Smart Key Control Module, Immobilizer Module,
ECM/PCM, Transaxle Range Switch
IGN COIL
15A
Ignition Coil #1/#2/#3/#4, Condenser
IG2
10A
BCM, Smart Key Control Module, Driver CCS Seat Warmer Module
Cluster Ionizer, Rain Sensor, A/C Control Module, Sunroof Motor
PCB Fuse & Relay Box (Blower Relay, Head Lamp (HI) Relay,
Fuel Pump #1 Relay)
WIPER FRT
25A
Multifunction Switch, Front Wiper Motor
PCB Fuse & Relay Box (Rain Sensor Relay, Front Wiper Relay)
DOOR LOCK
20A
Door Lock/Unlock Relay, Tail Gate Unlock Relay,
Two Turn Unlock Relay
SAFETY POWER
WINDOW
25A
Driver Safety Power Window Module
S/HEATER
15A
Seat Warmer Switch, Driver CCS Seat Warmer Module,
Passenger Seat Warmer Module
FOLD'G MIRR
10A
Power Outside Mirror Switch
ROOM LP
10A
BCM, Door Warning Switch, Tire Pressure Monitoring Module
Instrument Cluster, Digital Clock, A/C Control Module
Luggage Lamp
7 57
Maintenance
Fuse Name
Fuse rating
Circuit Protected
AUDIO
20A
With ISG : Low DC-DC Convertor
W/O ISG : Audio, A/V & Navigation Head Unit
TAIL LAMP LH
10A
Head Lamp LH, License Lamp
Rear Combination Lamp (IN/OUT) LH
TAIL LAMP RH
10A
Head Lamp RH, License Lamp, ILL. (+),
Rear Combination Lamp (IN/OUT) RH
START
10A
With Burglar Alarm : Burglar Alarm Relay
W/O Burglar Alarm : Transaxle Range Switch (A/T),
Smart Key Control Module (M/T), Ignition Lock Switch (M/T),
ECM (M/T), PCB Fuse & Relay Box (Start Relay) (M/T)
P/WDW LH
25A
Power Window Main Switch, Rear Power Window Switch LH
Driver Safety Power Window Module
P/WDW RH
25A
Power Window Main Switch, Rear Power Window Switch RH
Passenger Power Window Switch
HTD MIRR
10A
ECM/PCM, A/C Control Module
Driver/Passenger Power Outside Mirror
A/CON
10A
A/C Control Module
Maintenance
58
7
Engine compartment fuse panel
Fuse Name
Fuse rating
Circuit Protected
MULTI
FUSE
MDPS
80A
EPS Control Module
ALT
125A
Alternator
FUSE
B+1
50A
I/P Junction Box (Power Connector Fuse : ROOM LP 10A / AUDIO 20A,
Fuse : FOG LP FRT 15A / MODULE 1 10A / STOP LP 15A, Tail Lamp Relay)
INVERTER
40A
Inverter
B+2
50A
I/P Junction Box (Fuse : HAZARD 15A / PDM 1 25A / PDM 2 10A / SUNROOF 15A /
DR LOCK 20A / SAFETY POWER WINDOW 25A / S/HEATER 2 15A,
FOLD'G MIRR 10A / Power Window Relay)
IG1
40A
With Smart Key - PDM Relay Box (ESCL (ACC) Relay, ESCL (IG1) Relay)
W/O Smart Key - Ignition Switch
ABS1
40A
ESC Module, Multipurpose Check Connector
ABS2
40A
ESC Module
RR HTD
40A
I/P Junction Box (Rear Defogger Relay)
ECU5
10A
PCM
H/LP HI IND
10A
Instrument Cluster
7 59
Maintenance
Engine compartment main fuse panel
Fuse Name
Fuse rating
Circuit Protected
IG2
40A
PCB Fuse & Relay Box (Start Relay), W/O Smart Key - Ignition Switch,
With Smart Key - PDM Relay Box (ESCL (IG2) Relay)
ECU1
30A
PCB Fuse & Relay Box (Engine Control Relay, ECU2 10A)
ECU3
10A
Not Used
BLOWER
40A
PCB Fuse & Relay Box (Blower Relay)
C/FAN
40A
PCB Fuse & Relay Box (Cooling Fan (Low) Relay, Cooling Fan (Hi) Relay)
F/PUMP
20A
PCB Fuse & Relay Box (Fuel Pump #1 Relay)
H/LAMP HI
20A
PCB Fuse & Relay Box (Head Lamp (HI) Relay)
H/LAMP
20A
PCB Fuse & Relay Box (Head Lamp (LO) Relay)
HORN
10A
PCB Fuse & Relay Box (Horn Relay, Burglar Alarm Horn Relay)
ECU2
10A
M/T - ECM, A/T - E/R Junction Box (ECU_VM 10A)
B/UP LAMP
10A
A/T - PCM, Transaxle Range Switch
WIPER
10A
ECM/PCM, Rain Sensor
ECU4
20A
ECM/PCM
INJECTOR
15A
ECM/PCM, PCB Fuse & Relay Box (Fuel Pump #1 Relay)
H/LAMP LH
10A
Head Lamp LH
SENSOR1
10A
Purge Control Solenoid Valve, Variable Intake Solenoid Valve, Canister Close Valve,
PCB Fuse & Relay Box (Cooling Fan (Low) Relay, Cooling Fan (Hi) Relay)
SENSOR2
10A
Oil Control Valve #1/#2, Oxygen Sensor (Up/Down)
H/LAMP RH
10A
Head Lamp RH