Kia Sportage - 2015 Fuse Box Diagram

Kia Sportage - 2015 Fuse Box Diagram

3 53
Safety features of your vehicle
If an air bag deploys, there may be a
loud noise followed by a fine dust
released in the vehicle.These condi-
tions are normal and are non-toxic -
the air bags are packed in this fine
powder.
The dust generated during
air bag deployment may cause skin
or eye irritation as well as aggravate
asthma for some persons. Always
wash all exposed skin areas thor-
oughly with lukewarm water and a
mild soap after an accident in which
the air bags were deployed.
The SRS can function only when the
ignition switch is in the ON position.
If the SRS air bag warning light "
"
does not illuminate, or continuously
remains on after illuminating for
about 6 seconds or blinks when the
ignition switch is turned to the ON
position, or after the engine is start-
ed, comes on while driving, the SRS
is not working properly. If this occurs,
have your vehicle immediately
inspected by an authorized Kia deal-
er.
NOTICE
Before you replace a fuse or discon-
nect a battery terminal, turn the igni-
tion switch to the LOCK position and
remove the ignition switch. Never
remove or replace the air bag related
fuse(s) when the ignition switch is in
the ON position. Failure to heed this
warning will cause the SRS air bag
warning light to illuminate.
C040300AAM
Occupant Detection System
(ODS)
Your vehicle is equipped with an
occupant detection system in the
front passenger's seat.
The occupant detection system is
designed to detect the presence of a
properly-seated front passenger and
determine if the passenger's front air
bag should be enabled (may inflate)
or not.The driver's front air bag is not
affected or controlled by the occu-
pant detection system.
OSL030055N
4 31
Features of your vehicle
D080104AAM
Power window lock button
The driver can disable the power
window switches on the front and
rear passengers' doors by pressing
the power window lock switch to lock
position (pressed).
When the power window lock switch
is pressed, the driver's master con-
trol cannot operate the front and rear
passengers' power windows.
Always double check to make sure
all arms, hands, head and other
obstructions are safely out of the way
before closing a window.
OSL040016
CAUTION
- Opening /
closing
Window
To prevent possible damage to
the power window system, do
not open or close two windows
or more at the same time. This
will also ensure the longevity of
the fuse.
WARNING
- Power
windows
Do not allow children to play
with the power windows. Keep
the driver’s door power window
lock switch in the LOCK posi-
tion (pressed).
4 77
Features of your vehicle
Press cluch pedal to start engine
If the ENGINE START/STOP button
turns to the ACC position twice by
pressing the button repeatedly with-
out depressing the clutch pedal, the
warning illuminates on the LCD dis-
play for about 10 seconds to indicate
that you should depress the clutch
pedal to start the engine.
Shift to "P" position
If you try to turn off the engine without
the shift lever in the P (Park) position,
the ENGINE START/STOP button will
turn to the ACC position. If the button
is pressed once more it will turn to the
ON position. The warning illuminates
on the LCD display for about 10 sec-
onds to indicate that you should press
the ENGINE START/STOP button
with the shift lever in the P (Park) posi-
tion to turn off the engine.
Also, the warning chime sounds for
about 10 seconds. (if equipped)
Check stop lamp fuse
When the stop lamp fuse is discon-
nected, the warning illuminates for
10 seconds on the LCD display.
Replace the fuse with a new one. If
that is not possible you can start the
engine by pressing the engine
start/stop button for 10 seconds with
the engine start/stop button in ACC.
Press start button again
If you can not operate the ENGINE
START/STOP button when there is a
problem
with
the
ENGINE
START/STOP button system, the
warning illuminates for 10 seconds
and the chime sounds continuously
to indicate that you could start the
engine by pressing the ENGINE
START/STOP button once more.
The chime will stop if the ENGINE
START/STOP button system works
normally or the theft alarm system is
armed.
If the warning illuminates each time
you
press
the
ENGINE
START/STOP button, take your vehi-
cle to an authorized Kia dealer and
have the system checked.
Features of your vehicle
124
4
Digital clock (if equipped)
Whenever the battery terminals or
related fuses are disconnected, you
must reset the time.
For details, refer to the audio in the
end of this section.
The actual feature may differ from the
illustration.
Clothes hanger (if equipped)
WARNING
- Electric
shock
Do not put a finger or a foreign
element (pen, etc.) into a power
outlet and do not touch with a
wet hand. You may get an elec-
tric shock.
SL_USA_RADIO/Q
OSL040112
CAUTION
- Hanging
clothing
Do not hang heavy clothes, since
those may damage the hook.
WARNING
- Clock
Setting Distraction
Do not adjust the clock while
driving. Such adjustments may
distract you for too long from the
roadway and lead to a collision.
5 11
Driving your vehicle
• If the battery is weak or the smart
key does not work correctly, you
can start the engine by pressing
the engine start/stop button with
the smart key.
The side with the lock button
should
contact
the
engine
start/stop button directly.When you
press the engine start/stop button
directly with the smart key, the
smart key should contact the but-
ton at a right angle.
When the stop lamp fuse is blown,
you can't start the engine normally.
Replace the fuse with a new one. If
it is not possible, you can start the
engine by pressing the ENGINE
START/STOP button for 10 sec-
onds
while it is in the ACC posi-
tion. The engine can start without
depressing the brake pedal. But for
your safety always depress the
brake pedal before starting the
engine.
Do not press the ENGINE START/
STOP button for more than 10 sec-
onds except when the stop lamp fuse
is blown.
OXM052002
WARNING
- Unintended
vehicle movement
Never leave the smart key in the
vehicle with children or vehicle
occupants who are unfamiliar
with the vehicle operation.
Pushing
the
ENGINE
START/STOP button while the
smart key is in the vehicle may
result in unintended engine
activation and/or unintended
vehicle movement.
Maintenance
2
7
ENGINE COMPARTMENT
G010000AAM-EU
1. Engine coolant reservoir
2. Engine oil filler cap
3. Brake/clutch* fluid reservoir
4. Positive battery terminal
5. Negative battery terminal
6. Fuse box
7. Air cleaner
8. Engine oil dipstick
9. Radiator cap
10. Windshield washer fluid reservoir
* if equipped
OSL074101N/OSL071001N
The actual engine room in the vehicle may differ from the illustration.
GDI engine
T-GDI engine
Maintenance
46
7
FUSES
G210000AAM
A vehicle’s electrical system is pro-
tected from electrical overload dam-
age by fuses.
This vehicle has 3 fuse panels, one
located in the driver’s side panel bol-
ster, the other in the engine compart-
ment near the battery.
If any of your vehicle’s lights, acces-
sories, or controls do not work, check
the appropriate circuit fuse. If a fuse
has blown, the element inside the
fuse will
melt.
If the electrical system does not
work, first check the driver’s side
fuse panel.
Before replacing a blown fuse, dis-
connect the negative battery cable.
Always replace a blown fuse with
one of the same rating.
If the replacement fuse blows, this
indicates an electrical problem. Avoid
using the system involved and imme-
diately consult an authorized Kia
dealer.
Three kinds of fuses are used: blade
type for lower amperage rating, car-
tridge type, and multi fuse for higher
amperage ratings.
NOTICE
The actual fuse/relay panel label
may differ from equipped items.
WARNING
- Fuse
replacement
Never replace a fuse with any-
thing but another fuse of the
same rating.
• A higher capacity fuse could
cause damage and possibly a
fire.
• Never install a wire or alu-
minum foil instead of the
proper fuse - even as a tem-
porary repair. It may cause
extensive wiring damage and
a possible fire.
CAUTION
Do not use a screwdriver or any
other metal object to remove
fuses because it may cause a
short circuit and damage the
system.
OLM079051N
Normal
Normal
Blade type
Cartridge type
Fusible link
Blown
Blown
Normal
Blown
Normal
Blown
7 47
Maintenance
G210100AAM
Inner panel fuse replacement
1.Turn the ignition switch and all
other switches off.
2.Open the fuse panel cover.
3.Pull the suspected fuse straight
out. Use the removal tool provided
on the
engine compartment fuse
panel cover.
4.Check the removed fuse; replace it
if it is blown.
Spare fuses are provided in the
engine compartment fuse panel.
5.Push in a new fuse of the same rat-
ing, and make sure it fits tightly in
the clips.
If it fits loosely, consult an authorized
Kia dealer.
OLM079021
OSL070019
CAUTION
- Fuse fire
• When replacing a blown fuse
or relay with a new one, make
sure the new fuse or relay fits
tightly into the clips The
incomplete fastening fuse or
relay may cause the vehicle
wiring and electric systems
damage and a possible fire.
• Do not remove fuses, relays
and terminals fastened with
bolts or nuts.The fuses, relays
and terminals may be fas-
tened incompletely, and it may
cause a possible fire. If fuses,
relays and terminals fastened
with bolts or nuts are blown,
we recommend that you con-
sult with an authorized Kia
dealer.
Maintenance
48
7
If you do not have a spare, use a
fuse of the same rating from a circuit
you may not need for operating the
vehicle, such as the power outlet
fuse.
If the headlights or other electrical
components do not work and the
fuses are OK, check the fuse panel
in the engine compartment. If a fuse
is blown, it must be replaced.
G210101AHM-C1
Memory fuse
Your vehicle is equipped with a mem-
ory fuse to prevent battery discharge
if your vehicle is parked without
being operated for prolonged peri-
ods. Use the following procedures
before parking the vehicle for pro-
longed periods.
1.Turn off the engine.
2.Turn off the headlights and tail
lights.
3.Open the driver’s side panel cover
and pull out the memory fuse.
NOTICE
• If the memory fuse is pulled out
from the fuse panel, the warning
chime, audio, clock and interior
lamps, etc., will not operate. Some
items must be reset after replace-
ment. Refer to “Battery” in this
section.
• Even though the memory fuse is
pulled out, the battery can still be
discharged by operation of the
headlights or
other
electrical
devices.
OSL070022
7 49
Maintenance
G210200AHM
The actual feature may differ from the
illustration.
Engine compartment fuse
replacement
1.Turn the ignition switch and all
other switches off.
2.Remove the fuse panel cover by
pressing the tab and pulling the
cover up.
3.Check the removed fuse; replace it
if it is blown. To remove or insert
the fuse, use the fuse puller in the
engine compartment fuse panel.
4.Push in a new fuse of the same rat-
ing, and make sure it fits tightly in
the
clips.
If it fits loosely, consult an author-
ized Kia dealer.
G210201AAM
Main fuse and multi fuse
If the main fuse and multi fuse is
blown, it must be removed as follows:
1.Disconnect the negative battery
cable.
2.Remove the nuts shown in the pic-
ture above.
3.Replace the fuse with a new one of
the same rating.
4.Reinstall in the reverse order of
removal.
CAUTION
- Fuse panel
covers
After checking the fuse panel in
the
engine
compartment,
securely install the fuse panel
cover. If not, electrical failures
may occur from water contact.
OLM079052N
OLM079023
Maintenance
50
7
NOTICE
If the multi fuse is blown, consult an
authorized Kia dealer.
G210300AAM-EU
Fuse/relay panel description
Inside the fuse/relay panel covers,
you can find the fuse/relay label
describing fuse/relay name and
capacity.
NOTICE
Not all fuse panel descriptions in
this manual may be applicable to
your vehicle. It is accurate at the
time of printing. When you inspect
the fuse panel in your vehicle, refer
to the fuse panel label.
7 51
Maintenance
Instrument panel fuse panel
NOTICE
The actual fuse/relay panel label
may differ from equipped items.
OSL070026
OSL074201N
Maintenance
52
7
Engine compartment fuse
panel
NOTICE
The actual fuse/relay panel label
may differ from equipped items.
OSL074202N
OLM079027N
7 53
Maintenance
Engine compartment fuse
panel
NOTICE
The actual fuse/relay panel label
may differ from equipped items.
OLM079053N
OSL074103
Maintenance
54
7
Inner fuse panel
Fuse Name
Fuse rating
Protected component
POWER
CONNECTOR
AUDIO
20A
Audio
RF_ANT
7.5A
RF Receiver
A/BAG
15A
SRS Control Module, Passenger Occupant Detection Sensor, Telltale & SBR Lamp
S/HEATER FRT
15A
Driver/Passenger Seat Warmer Switch
S/HEATER RR
15A
Rear Seat Warmer LH/RH
A/CON
7.5A
A/C Control Module (Auto)
HTD MIRR
7.5A
A/C Control Module, Driver/Passenger Power Outside Mirror
CLUSTER
10A
Driver/Passenger Seat Warmer Switch, Driver CCS Control Module, Instrument Cluster, Tire
Pressure Monitoring Module, Audio, Alternator, BCM, A/C Control Module, Telltale & SBR Lamp
IG2 A
10A
BCM, Smart Key Control Module, IPS Control Module (IG2)
WIPER RR
15A
Rear Wiper Motor, Multifunction Switch (Wiper), ICM Relay Box (Rear Wiper Relay)
IG2 B
10A
Cluster Ionizer, A/C Control Module, Rain Sensor, Sunroof Motor, Electro Chromic Mirror,
E/R Fuse & Relay Box (Blower Relay)
POWER OUTLET 2
20A
Rear Power Outlet, Front Power Outlet LH, Front Cigarette Lighter
A/BAG IND
10A
Instrument Cluster (A/Bag IND.)
SMART KEY 2
10A
Smart Key Control Module
WIPER FRT
25A
Front Wiper Motor, Multifunction Switch (Wiper), E/R Fuse & Relay Box (Front Wiper (Low) Relay,
Wiper (Rain Sensor) Relay)
POWER OUTLET 1
15A
Front Power Outlet RH
SMART KEY 1
10A
BCM, Smart Key Control Module
ACC
10A
Audio, Amp, Sunroof Control Module, Power Outside Mirror Switch
START
10A
Burglar Alarm Relay (With Burglar Alarm), E/R Fuse & Relay Box (Start Relay : W/O Burglar Alarm
& Smart Key), Smart Key Control Module (W/O Burglar Alarm & With Smart Key)
MODULE IG1
10A
EPS Control Module, ATM Shift Lever ILL., 4WD ECM, Stop Lamp Switch, IPS Control Module (IG1)
UH_BOX
20A
E/R Fuse & Relay Box (ECU 2 7.5A, ABS 7.5A, TCU 2 7.5A)
7 55
Maintenance
Fuse Name
Fuse rating
Protected component
ROOM LP
10A
BCM, Map Lamp, Room Lamp, Driver/Passenger Vanity Lamp, Electro Chromic Mirror,
Luggage Lamp, Ignition Key ILL. & Door Warning Switch, Tire Pressure Monitoring Module,
Instrument Cluster (MCU, IND.), A/C Control Module, IPS Control Module (B+)
PDM B
10A
Start/Stop Button Switch, Smart Key Control Module
DR LOCK
15A
Door Lock Relay, Door Unlock Relay, Tail Gate Relay, ICM Relay Box (Two Turn Unlock Relay)
HAZARD
15A
BCM
FOG LP RR
10A
(Not Used)
PDM A
25A
Smart Key Control Module
ATM K/LOCK
7.5A
ATM Shift Lever, Key Solenoid
CORNERING LAMP
10A
(Not Used)
SEAT VENT
15A
Driver CCS Seat Warmer
P/WDW RH
25A
Power Window Main Switch, Passenger Power Window Switch, Rear Power Window Switch RH
P/WDW LH
25A
Rear Power Window Switch LH, Power Window Main Switch
SAFETY POWER
WINDOW
20A
Driver Safety Power Window Module
P/SEAT(DRV)
20A
Driver Seat Manual Switch
MODULE B+
10A
Multipurpose Check Connector, Data Link Connector, Driver CCS Switch,
Rear Parking Assist Buzzer
SUNROOF
15A
Sunroof Motor, Sunroof Control Module
AMP
25A
Amp
HTD_STRG
15A
Heated steering wheel
Maintenance
56
7
Engine compartment fuse panel
Fuse Name
Fuse rating
Protected component
MULTI
FUSE
MDPS
80A
EPS Control Module
B+1
60A
I/P Junction Box (PDM A 25A, DR LOCK 15A, HAZARD 15A, IPS 4~7)
ABS 2
40A
ESC Module
EMS
40A
EMS Box (TCU 1 15A, ECU 30A, A/CON 10A, F/PUMP 15A)
ABS 1
40A
ESC Module
BLOWER
40A
Blower Relay
B+3
60A
I/P Junction Box (P/SEAT(DRV) 20A, SAFETY POWER WINDOW 20A, PDM B 10A, ATM
K/LOCK 7.5A, SEAT VENT 15A, Power Connector (AUDIO 20A, RF_ANT 7.5A),
ROOM LP 10A)
B+2
60A
I/P Junction Box (Power Window
Relay, SUNROOF 15A, AMP 25A, MODULE B+ 10A,
IPS 0~3, IPS 8~10)
FUSE
C/FAN (MPI engine)
40A
Cooling Fan (High) Relay, Cooling Fan (Low) Relay
C/FAN (T-GDI engine)
50A
Cooling Fan (High) Relay, Cooling Fan (Low) Relay
RR HTD
40A
Rear Defogger Relay
IG 1
30A
PDM Relay Box (IGN1/ACC Relay : With Smart Key), Ignition Switch (W/O Smart Key)
IG 2
40A
PDM Relay Box (IGN2 Relay : With Smart Key), Ignition Switch (W/O Smart Key)
HORN
15A
Horn Relay
DEICER
15A
Front Wiper Deicer Relay
STOP LP
10A
Stop Lamp Switch, Smart Key Control Module, ICM Relay Box (DBC Relay)
4WD
20A
4WD ECU
AMS
10A
Battery Sensor
TCU 2 (MPI engine)
7.5A
Transaxle Range Switch
TCU 2 (T-GDI engine)
7.5A
Transaxle Range Switch, Vacuum Switch, Vacuum Pump Relay
ABS
7.5A
ESC Module, ICM Relay Box (DBC Relay), Multi Switch
ECU 2
7.5A
ATM P/N Relay, PCM, Multifunction Switch (Remote Control)
V_PUMP (T-GDI engine)
20A
Vacuum Pump Relay
7 57
Maintenance
Fuse Name
Fuse rating
Protected component
F/PUMP
15A
Fuel Pump Relay
SENSOR 4
15A
Fuel Pump Relay, PCM, Oxygen Sensor (Up)/(Down),
E/R Fuse & Relay Box (Cooling Fan (High)/(Low) Relay)
SENSOR 3
10A
A/CON Relay, Injector #1~#4
SENSOR 2
10A
(Not Used)
TCU 1
15A
PCM
A/CON
10A
A/CON Relay
SENSOR 1 (MPI engine)
10A
Immobilizer Module, Crankshaft Position Sensor, Camshaft Position Sensor #1/#2, Oil Control Valve
#1/#2Canister Purge Control Solenoid Valve, Variable Intake Solenoid Valve, Canister Close Valve
SENSOR 1 (T-GDI engine)
10A
Immobilizer Module, Crankshaft Position Sensor, Camshaft Position Sensor #1/#2, Oil Control Valve
#1/#2Canister Purge Control Solenoid Valve, Variable Intake Solenoid Valve, Canister Close Valve,
RCV
ECU 1
20A
Ignition Coil #1~#4, Condenser
ECU
30A
Engine Control Relay
Engine compartment main fuse panel (EMS Box)