Kia K900 - 2015 Fuse Box Diagram

Kia K900 - 2015 Fuse Box Diagram

Seat and safety features of your vehicle
3
3-45
NOTICE
Before you replace a fuse or discon-
nect a battery terminal, turn the
Engine Start/Stop button to the OFF
position. Never remove or replace
the air bag related fuse(s) when the
Engine Start/Stop button is in the
ON position. Failure to heed this
warning will cause the SRS air bag
warning light to illuminate.
Occupant detection system
Your vehicle is equipped with an
occupant detection system in the
front passenger's seat.
The occupant detection system is
designed to detect the presence of a
properly-seated front passenger and
determine if the passenger's front air
bag should be enabled (may inflate)
or not. The driver's front air bag is not
affected or controlled by the occu-
pant detection system.
OKH033132N
Passenger’s front air bag
Air bag obstructions
Do not install or place any
accessories on the steering
wheel, instrument panel, or on
the front passenger's panel
above the glove box in a vehicle
Such objects may become dan-
gerous projectiles if the air bag
deploys.
WARNING
OKH035105N
Flying objects
Do not place any objects (an
umbrella, bag, etc.) between the
front door and the front seat.
Such objects may become dan-
gerous projectiles if the side
airbag inflates.
WARNING
Features of your vehicle
4
4-25
To Reset the Power Trunk
If the battery has been discharged or
disconnected, or if the related fuse
has been replaced or disconnected,
reset the power trunk as follows:
1. Move the shift lever to the P(Park)
position.
2. Close the trunk manually.
If the power trunk doesn't work prop-
erly after performing the above pro-
cedure, have the system checked by
an authorized Kia Premium dealer.
Trunk Lid Control Button
When the trunk lid control button is
ON (depressed), the power trunk can
be controlled with the power trunk
main control button, power trunk
open, close button, and the smart key.
When this trunk lid control button is
OFF (not depressed), the power
trunk can be controlled using the
mechanical key of the smart key only.
Even though the trunk lid control but-
ton is OFF (not depressed), the trunk
will still be propelled upward by
mechanical force if the trunk is man-
ually opened more than 10 degrees
beyond the fully closed position.
In addition, if the trunk is manually
closed to the secondary latch posi-
tion, the trunk will be electrically
moved to the fully latched position.
NOTICE
Close the trunk, and keep the trunk
lid control button in the OFF (not
depressed) position before washing
the vehicle in an automatic car
wash.
OKH043022N
• Always keep the Trunk Lid
Control Button in the OFF (not
depressed) position when not
in use. Serious injury or death
can result from unintentional
operation by a child.
• Make sure heads, other body
parts or other obstacles are
safely out of the way before
operating the power trunk.
WARNING
Features of your vehicle
4-34
Power window lock button
The driver can disable the power
window switches on the rear passen-
gers’ doors by pressing the power
window lock switch. The indicator will
be illuminated.
When the power window lock switch
indicator is illuminated :
• The driver’s master control can
operate all the power windows.
• The front passenger’s control can
operate the front passenger’s
power window.
• The rear passenger’s control can-
not operate the rear passenger’s
power window.
Always double check to make sure
all arms, hands, head and other
obstructions are safely out of the way
before closing a window.
OKH043027N
Power windows
Do not allow children to play
with the power windows. Keep
the driver’s door power window
lock button in the LOCK posi-
tion (illuminated).
WARNING
Opening / closing Window
To prevent possible damage to
the power window system, do
not open or close two windows
or more at the same time. This
will also ensure the longevity of
the fuse.
CAUTION
Features of your vehicle
4-44
Resetting the sunroof
Whenever the vehicle battery is dis-
connected or discharged, or related
fuse is blown, you must reset your
sunroof system as follows:
1.The Engine Start/Stop Button must
be in the ON position.
2.Release the control lever.
3.Push and hold the control lever for-
ward (for more than 10 seconds)
until the sunroof tilts and slightly
moves. Then, release the lever.
4.Push the sunroof control lever for-
ward in the direction of close until
the sunroof operates as follows:
Sunroof glass and sunshade open
Sunroof glass and sunshade close
Then, release the control lever.
When this is complete, the sunroof
system is reset.
For more detailed information, con-
tact
an authorized Kia Premium
dealer.
NOTICE
If the sunroof is not reset when the
vehicle battery is disconnected or
discharged, or related fuse is blown,
the sunroof may operate improperly.
Features of your vehicle
4-70
Service interval OFF
If the service interval is not set,
"Service interval OFF" message is
displayed on the LCD display.
NOTICE
If any of the following conditions
occurs, the mileage and days may be
incorrect.
-
The battery cable is disconnected.
-
The fuse switch is turned off.
-
The battery is discharged.
Tire Pressure
This mode displays the pressure sta-
tus of each tire.
You can change the tire pressure unit
in "User settings" mode.
For more details, refer to "User
Settings mode" in this chapter.
Warning Message
If one of followings occurs, warning
messages will be displayed on the
information mode for several sec-
onds.
- Malfunction of below systems
Blind Spot Detection (BSD)
Presafe Seat Belt (PSB)
Electronic Control Suspension
(ECS)
Tire Pressure Monitoring System
Advanced Smart Cruise Control
Low washer fluid
LED Headlamp (LED)
Active Air Flap(AAF)
OKH043403N
OKH043405N
Type A
Type B
Features of your vehicle
4
4-81
Check battery voltage
• This warning message illuminates
if the battery voltage is abnormally
low, or the battery has poor per-
formance. In this case, have your
vehicle inspected by an authorized
Kia Premium dealer.
Check BRAKE SWITCH fuse
• This warning message illuminates
if the brake switch fuse is discon-
nected.
• It means that you should replace
the fuse with a new one. If that is
not possible, you can start the
engine by pressing the Engine
Start/Stop Button for 10 seconds in
the ACC position.
Shift to P or N to start engine
• This warning message illuminates
if you try to start the engine with
the shift lever not in the P (Park) or
N (Neutral) position.
OKH043515N
Type A
Type B
OKH045932N
Type A
Type B
OKH043933N
Type A
Type B
Features of your vehicle
4-84
Turn on "FUSE SWITCH"
• This warning message illuminates
if the fuse switch on the fuse box is
OFF.
• It means that you should turn the
fuse switch on.
For more details, refer to “Fuses” in
chapter 7.
Low Tire Pressure
• This warning message illuminates
if the tire pressure is low with the
Engine Start/Stop button in ON
position.
For more details, refer to "Tire
Pressure
Monitoring
System
(TPMS)" in chapter 6.
Align steering wheel
• This warning message illuminates
if you start the engine when the
steering wheel is turned to more
than 90 degrees to the left or right.
• It means that you should turn the
steering wheel and make the angle
of the steering wheel be less than
30 degrees.
OKH043937N
Type A
Type B
OKH043938N
Type A
Type B
OKH045415N
Type A
Type B
Features of your vehicle
4
4-167
Clock
Whenever the battery terminals or
related fuses are disconnected, you
must reset the time.
You can set the clock by using the
AVN (Audio or Navigation)
For the details, refer to the AVN man-
ual.
Clothes hanger (if equipped)
To use the hanger, pull down the
upper portion of hanger.
OKH045241N
Clock Setting Distraction
Do not adjust the clock while
driving. Such adjustments may
distract you for too long from
the roadway and lead to a colli-
sion.
WARNING
OKH043511N
Hanging colothing
Do not hang heavy clothes, since
those may damage the hook.
CAUTION
5-10
Driving your vehicle
• If the battery is weak or the smart
key does not work correctly, you
can start the engine by pressing
the engine start/stop button with
the smart key.
The side with the lock button
should
contact
the
engine
start/stop button directly.
When you press the engine
start/stop button directly with the
smart key, the smart key should
contact the button at a right angle.
When the stop lamp fuse is blown,
you can't start the engine normally.
Replace the fuse with a new one. If
it is not possible, you can start the
engine by pressing the ENGINE
START/STOP button for 10 sec-
onds while it is in the ACC position.
The engine can start without
depressing the brake pedal. But for
your safety always depress the
brake pedal before starting the
engine.
Do not press the ENGINE START/
STOP button for more than 10 sec-
onds except when the stop lamp fuse
is blown.
OKH055003N
Unintended vehicle move-
ment
Never leave the smart key in the
vehicle with children or vehicle
occupants who are unfamiliar
with the vehicle operation.
Pushing the ENGINE START/
STOP button while the smart
key is in the vehicle may result
in unintended engine activation
and/or
unintended
vehicle
movement.
WARNING
Maintenance
7
7-3
ENGINE COMPARTMENT
1. Engine oil dipstick
2. Engine oil filler cap
3. Engine coolant reservoir
4. Radiator cap
5. Brake fluid reservoir
6. Power steering fluid reservoir
7. Windshield washer fluid reservoir
8. Air cleaner
9. Fuse box
10. Jumper terminal
OKH015008N
The actual engine compartment in the vehicle may differ from the illustration.
The battery is in the trunk.
3.8L Engine
7-4
Maintenance
OKH013006N
1. Engine coolant reservoir
2. Radiator cap
3. Brake fluid reservoir
4. Air cleaner
5. Engine oil dipstick
6. Engine oil filler cap
7. Windshield washer fluid reservoir
8. Fuse box
9. Power steering fluid reservoir
10. Jumper terminal
The actual engine compartment in the vehicle may differ from the illustration.
The battery is in the trunk.
5.0L Engine
7-70
Maintenance
FUSES
A vehicle’s electrical system is pro-
tected from electrical overload dam-
age by fuses.
This vehicle has 2 fuse panels, one
located in the driver’s side panel bol-
ster, another is in the engine com-
partment.
If any of your vehicle’s lights, acces-
sories, or controls do not work, check
the appropriate circuit fuse. If a fuse
has blown, the element inside the
fuse will be melted.
If the electrical system does not
work, first check the driver’s side
fuse panel.
Before replacing a blown fuse, dis-
connect the negative battery cable.
Always replace a blown fuse with
one of the same rating.
If the replacement fuse blows, this
indicates an electrical problem. Avoid
using the system involved and imme-
diately consult an authorized Kia
Premium dealer.
Three kinds of fuses are used: blade
type for lower amperage rating, car-
tridge type, and fusible link for higher
amperage ratings.
Do not arbitrarily modify or add-on
electric wiring of the vehicle.
Fuse replacement
Never replace a fuse with any-
thing but another fuse of the
same rating.
• A higher capacity fuse could
cause damage and possibly a
fire.
• Never install a wire or alu-
minum foil instead of the
proper fuse - even as a tem-
porary repair. It may cause
extensive wiring damage and
a possible fire.
WARNING
Do not use a screwdriver or any
other metal object to remove
fuses because it may cause a
short circuit and damage the
system.
CAUTION
OKH073054N
Normal
Normal
Blade type
Cartridge type
Fusible type
Multi fuse type
Blown
Blown
Normal
Blown
Normal
Blown
NOTICE
The actual fuse/relay panel label
may differ depending on equipment/
options.
Instrument panel fuse replace-
ment
1.Turn the Engine Start/Stop button
and all other switches off.
Maintenance
7
7-71
• When replacing a blown fuse
or relay, make sure the new
fuse or relay fits tightly into
the clips.
Failure to tightly
install the fuse or relay may
cause damage to the wiring
and electric systems.
• Do not remove fuses, relays
and terminals fastened with
bolts or nuts. The fuses,
relays and terminals may be
not be fastened correctly
which may cause vehicle
damage.
CAUTION
Do not input any other objects
except fuses or relays into
fuse/relay terminals such as a
driver or wiring. It may cause
contact failure and system mal-
function.
CAUTION
Electrical Fire
Always ensure replacements
fuses and relays are securely
fastened when installed. Failure
to do so can result in a vehicle
fire.
WARNING
OKH073019N
Drive side panel
7-72
Maintenance
2.Lift the end of strip (1) up.
3.Press the fastener head with screw
driver and then pull the fastener
out.
4.Lift the rear portion of small service
cover (2) up and then remove the
service cover.
(A) : for assemble
(B) : for remove
5.Press the fastener head with screw
driver and then pull the fastener
out from main service cover (3).
6.Pull the main service cover over
0.28 in (7mm) to toward the front of
the vehicle.
7.Lift the main service cover up and
then remove the main service
cover. Be careful not to damage
the holder under the main service
cover.
8.Open the fuse panel cover.
9.Pull the suspected fuse straight
out. Use the fuse puller provided in
the engine compartment fuse
panel.
10.
Check the removed fuse; replace
it if it is blown.
11. Push in a new fuse of the same
rating, and make sure it fits tight-
ly in the clips.
If it fits loosely, consult an authorized
Kia Premium dealer.
If you do not have a spare, use a
fuse of the same rating from a circuit
you may not need for operating the
vehicle, such as the cigarette lighter
fuse.
If the headlights or other electrical
components do not work and the
fuses are OK, check the fuse panel
in the engine compartment. If a fuse
is blown, it must be replaced.
OKH073051N
OKH073052N
A
B
Maintenance
7
7-73
Fuse switch
Always put the transportation fuse
switch at the ON position.
If you move the switch to the OFF
position, some items such as the
audio and digital clock must be reset
and the smart key may not work
properly.
NOTICE
If you need to park your vehicle for
prolonged periods more than 1
month, move the transportation fuse
switch to the OFF position to pre-
vent the battery being discharged.
Engine compartment fuse
replacement
1.Turn the Engine Start/Stop button
and all other switches off.
OKH073021N
OKH073022N
OKH073023N
• Always place the transporta-
tion fuse switch in the ON
position while driving the vehi-
cle.
• Do not move the transporta-
tion fuse switch repeatedly as
this may cause damage to the
fuse switch.
CAUTION
2.Remove the fuse panel cover by
pressing the tab and pulling up.
When the blade type fuse is dis-
connected, remove it by using the
clip designed for changing fuses
located in the engine room fuse
box. Upon removal, securely insert
reserve fuse of equal quantity.
3.Check the removed fuse; replace it
if it is blown. To remove or insert
the fuse, use the fuse puller in the
engine compartment fuse panel.
4.Push in a new fuse of the same rat-
ing, and make sure it fits tightly in
the clips. If it fits loosely, consult an
authorized Kia Premium dealer.
Main fuse
If the main fuse is blown, it must be
removed as follows:
1.Remove the fuse panel cover on
the right side in the engine com-
partment.
2.Remove the nuts shown in the pic-
ture above.
3.Replace the fuse with a new one of
the same rating.
4.Reinstall in the reverse order of
removal.
NOTICE
If the main fuse is blown, consult an
authorized Kia Premium dealer.
7-74
Maintenance
Fuse Panel Cover
After checking the fuse panel in
the
engine
compartment,
securely install the fuse panel
cover. If not, electrical failures
may occur from water contact.
CAUTION
OKH073080N
Visually inspect the battery cap
to ensure it is securely closed.
If the battery cap is not secure-
ly closed, moisture may enter
the system and damage the
electrical components.
CAUTION
Maintenance
7
7-75
Multi fuse
If the multi fuse is blown, it must be
removed as follows:
1.Disassemble the negative cable of
battery.
2.Remove the nuts shown in the pic-
ture above.
3.Replace the fuse with a new one of
the same rating.
4.Reinstall in the reverse order of
removal.
NOTICE
If the multi fuse is blown, consult an
authorized Kia Premium dealer.
OKH075024N
7-76
Maintenance
Fuse/relay panel description
Instrument panel fuse panel
Inside the fuse/relay panel covers,
you can find the fuse/relay label
describing fuse/relay name and
capacity.
NOTICE
Not all fuse panel descriptions in
this manual may be applicable to
your vehicle. It is accurate at the
time of printing. When you inspect
the fuse panel in your vehicle, refer
to the fuse panel label.
OKH075049N
OKH073029N
Maintenance
7
7-77
Fuse Name
Fuse rasting
Circuit Protected
AUDIO 2
10A
A/V & Navigation Head Unit, TMU
MODULE 3
10A
A/C Control Module, Electro Chromic Mirror, Rear Seat Console Switch, Driver Haptic Control Module, Rear
CCS Control Module LH/RH, Driver/Passenger IMS Control Module, Driver Power Seat Module, Rear Seat
Warmer Control Module LH/RH, Rear Smart Junction Box (IPS Control Module)
MODULE 2
10A
Steering Tilt & Telescopic Module, LDWS Camera Module, Crash Pad Switch, Stop Lamp Switch, A/T Console
Switch, Electric Parking Brake Switch, Console Switch, Smart Cruse Control Radar, Air Sus, TPMS, PAS
SPARE
10A
Spare
WIPER
10A
Auto Light & Rain Sensor
MODULE 1
10A
BCM, Trunk Lid Main Switch, Low Panel Switch
MEMORY 2
10A
External Buzzer, Driver Smart Connector, Passenger Smart Connector
DRV HEAT
15A
Driver Haptic Control Module, Driver CCS Module
PASS HEAT
15A
Passenger CCS Module
WINDOW LH
30A
Rear Power Window Module LH, Rear Power Window Module LH
HEADREST
15A
Active Headrest Sensor
BCM
10A
BCM, Multifunction Switch, Driver/Passenger Power Seat Switch, Rear Door Module LH/RH
EPB 2
15A
Electric Parking Brake Module
P/HANDLE
15A
Steering Tilt & Telescopic Module
7-78
Maintenance
Fuse Name
Fuse rasting
Circuit Protected
B/ALARM
10A
BCM
INHIBITOR 1
10A
W/O Electric ATM Shift Lever
: Sport Mode Switch
With Electric ATM Shift Lever
: Electric ATM Shift Lever
P/DOOR DRV
15A
Driver Door Latch
PASS P/SEAT
20A
W/O IMS : Passenger Seat Relay Box
With IMS : Passenger IMS Control Module
P/DOOR RR
LH
15A
Rear Door Latch LH
DRV P/SEAT
30A
Driver Lumbar Support Valve, Driver Lumbar Support Switch, Driver Power Seat Module
S/ROOF 2
10A
Sunroof Motor
SMART KEY 2
10A
Metal Core Block (PCB #2) (P/N Relay), Smart Key Control Module
S/ROOF 1
20A
Sunroof Motor
START
10A
Start/Stop Button Switch
MODULE 5
10A
360° camera monitoring system Unit, Parking Guide Unit, Head-UP, Instrument Cluster, Driver Lumbar Support
Valve, Rear Seat Console Switch, Rear Seat Warmer Control Module LH/RH, Rear Massage Control Module
LH/RH, Rear Smart Junction Box (IPS Control Module)
CLUSTER
10A
Instrument Cluster, Head-Up Display
SMART KEY 1
25A
Smart Key Control Module
DOOR LAMP
10A
Driver Door Module, Passenger Door Module
STR'G HTD
15A
Clock Spring
Maintenance
7
7-79
Fuse Name
Fuse rasting
Circuit Protected
MODULE 6
10A
Smart Key Control Module, BCM
A/BAG
15A
Driver Seat Belt Pretensioner, Passenger Seat Belt Pretensioner, SRS Control Module
A/BAG IND
10A
Instrument Cluster
IGN 1
20A
E/R Fuse & Relay Box LH (FUSE : F20, F21, F23, F25, F26, F27)
MEMORY 1
10A
Passenger IMS Control Module, Driver/Passenger Door Module, Driver/Passenger Power Seat Switch, Rear
Door Module LH/RH, Power Trunk Module, Instrument Cluster, BCM, Security Sensor, Analogue Clock, A/C
Control Module, Head-Up Display
MULTI MEDIA
10A
Keyboard, A/V Navigation Head Unit, Front Monitor, TMU
ROOM LAMP
10A
Rear Seat Foot Lamp LH/RH, Trunk Room Lamp LH/RH, Driver/Passenger Foot Lamp, Room Lamp, Overhead
Console Lamp, Front Vanity Lamp Switch LH/RH, Rear Vanity Lamp Switch LH/RH, Garnish Lamp LH/RH,
Garnish Center Lamp, Glove Box Lamp
MEMORY 3
10A
RF Receiver
EPB 1
15A
Electric Parking Brake Module
SPARE
15A
Spare
IGN 2
20A
E/R Fuse & Relay Box LH (Fuse : F29, F30)
A/CON 1
10A
A/C Control Module, Ionizer, Metal Core Block (PCB #2) (Blower Relay)
AFLS
15A
Adaptive Front Lighting Module, HEAD LAMP LH/RH
SPARE
10A
Spare
P/OUTLET FR
20A
Front Cigarette Lighter
7-80
Maintenance
Fuse Name
Fuse rasting
Circuit Protected
MODULE 4
10A
Electric ATM Shift Lever, Analogue Clock, BCM, 360° camera monitoring system Unit,
Overhead Console Lamp, Parking Guide Unit
AUDIO 1
10A
A/V & Navigation Head Unit, Front/Rear Monitor Module, Keyboard, Smart Key Control Module, Rear Seat
Audio Switch, AMP, TMU
SPARE
10A
Spare
P/OUTLET RR
20A
P/OUTLET RR, Front Power Outlet
Maintenance
7
7-81
Engine compartment fuse panel
(Driver’s side)
NOTICE
Not all fuse panel descriptions in
this manual may be applicable to
your vehicle. It is accurate at the
time of printing. When you inspect
the fuse panel in your vehicle, refer
to the fuse panel label.
OKH075025N
OKH075026N
7-82
Maintenance
Fuse Name
Fuse rasting
Circuit Protected
Stop Lamp
15A
Stop Signal Electronic Module
Brake SW
10A
Stop Lamp Switch, Smart Key Control Module
AAF
10A
Not Used
Injector 1
15A
Injector Drive Box
SMK (IGN1)
40A
E/R Fuse & Relay Box LH (RLY.5)
ESC 1
40A
ESC Control Module
ALT
200A
E/R Fuse & Relay Box LH (Fuse : F9, F15, F16, F18, F19), Alternator
Cooling
70A
E/R Fuse & Relay Box LH (RLY.6)
SMK (IGN2)
30A
E/R Fuse & Relay Box LH (RLY.3)
ESC 2
40A
ESC Control Module
Diagnosis
25A
Multipurpose Check Connector
H/Lamp Washer
25A
Not Used
Battery 3
40A
Smart Junction Box (Fuse : F5, F6, F8, F9, F10)
SMK (ACC)
40A
E/R Fuse & Relay Box LH (RLY.9)
TCU 1
10A
ECM, Transmission Range Switch, Transmission Park Postilion Sensor & Switch
ESC 3
10A
Steering Angle Sensor, ESC Control Module
B/UP Lamp 1
10A
E/R Fuse & Relay Box LH (RLY.4)
Maintenance
7
7-83
Fuse Name
Fuse rasting
Circuit Protected
Vaccum Pump 1
10A
E/R Fuse & Relay Box LH (RLY.10), Vaccum Pump Switch
Vaccum Pump 2
20A
E/R Fuse & Relay Box LH (RLY.10)
ECU 1
10A
ECU
EHPS 1
10A
EHPS Module
Inhibitor 2
10A
A/T Console Switch, Electric ATM Shift Lever
Washer
15A
E/R Fuse & Relay Box LH (RLY.8)
Wiper 2
10A
E/R Fuse & Relay Box LH (RLY.1)
B/UP Lamp 2
10A
Back View Camera & Back-Up Lamp, A/T Console Switch, Electro Chromic Mirror, A/V & Navigation Head
Unit
7-84
Maintenance
Engine compartment fuse panel
(Passenger’s side)
NOTICE
Not all fuse panel descriptions in
this manual may be applicable to
your vehicle. It is accurate at the
time of printing. When you inspect
the fuse panel in your vehicle, refer
to the fuse panel label.
OKH075027N
OKH073028N
Maintenance
7
7-85
Fuse
Fuse Name
Fuse rasting
Circuit Protected
METAL
CORE
BLOCK
(PCB #1)
Sensor 3
10A
Rear Smart Junction Box (Fuel Pump Relay)
P/Door PASS
15A
Passenger Door Latch
SPARE
15A
Spare
Deicer
15A
Metal Core Block (PCB #1) (Front Deicer Relay)
Ignition Coil
20A
Ignition Coil #1~6, Ignition Coil #1~8, Condenser #1, #2
Horn
15A
Metal Core Block (PCB #1) (Horn Relay)
Sensor 2
10A
Mass Air Flow Sensor, Oxygen Sensor #1~4, E/R Fuse & Relay Box LH (RLY.6)
Sensor 4
15A
CMP Sensor #1~4
Wiper 3
30A
Wiper Motor
ECU 3
30A
Metal Core Block (PCB #1) (ECU Main Relay)
ECS 2
40A
Metal Core Block (PCB #1) (Air ECS Relay)
METAL
CORE
BLOCK
(PCB #2)
Sensor 1
15A
Purge Control Solenoid Valve, ECM, Variable Intake Solenoid Valve,
Oil Control Valve #1~4
Injector 2
15A
Injector #1~6, Injector #1~8
SPARE
10A
Spare
SPARE
20A
Spare
SPARE
10A
Spare
7-86
Maintenance
Fuse
Fuse Name
Fuse rasting
Circuit Protected
METAL
CORE
BLOCK
(PCB #2)
A/CON 2
10A
A/C Control Module
Cruise
10A
Smart Cruise Control Radar
TCU 2
15A
TCM
ECU 2
10A
ECM
Blower
40A
Metal Core Block(PCB) (Blower Relay)
Start 1
30A
E/R Fuse Relay Box LH (RLY.2)
MULTI
FUSE
Presafety Seat
Belt DRV
40A
Driver Seat Belt Pretensioner
Presafety Seat
Belt PASS
40A
Passenger Seat Belt Pretensioner
Battery 2
60A
Smart Junction Box (Fuse : F13~20, F23, F24, F27, F28, IPS5~8, Arisu-LT2)
Battery 1
60A
Smart Junction Box (Fuse : F38, IPS1, 3, Arisu-LT1, Leak Current Autocut Device)
EHPS 2
80A
EHPS Module
FUSE
Battery 4
60A
Metal Core Block (PCB #1) (Fuse : F2, F4, F6, F10, F11, F12)
Battery 5
60A
Metal Core Block (PCB #2) (Fuse : F7, F11)
Maintenance
7
7-87
Trunk fuse panel
NOTICE
Not all fuse panel descriptions in this manual may be applicable to your vehicle. It is accurate at the time of print-
ing. When you inspect the fuse panel in your vehicle, refer to the fuse panel label.
OKH073043N
• Battery box fuse panel
OKH075042N
OKH075041N
7-88
Maintenance
Fuse Name
Fuse rasting
Circuit Protected
Rear HTD
40A
Rear Defogger Relay
P/WDW RH
30A
Passenger Power Window Module, Rear Power Window Module RH
P/Trunk
30A
Power Trunk Module
F/Pump
20A
Fuel Pump Relay
P/Seat RR 1
20A
Rear Seat Relay Box
ECS 1
20A
ECS Unit
P/Seat PASS
15A
Passenger IMS Control Module
P/Door RR RH
15A
Rear Door Latch RH
Spare
15A
Spare
Trunk
10A
Trunk Lid Relay, Power Trunk Module Buzzer
Fog Lamp RR
10A
Rear Fog Lamp Relay
Spare
40A
Spare
AMP
30A
AMP
Spare
20A
Spare
P/Seat RR 2
10A
Rear Seat Relay Box LH, Rear Seat Relay RH, Rear Seat Massage Control Module LH, Rear Seat Massage
Control Module RH
Spare
10A
Spare
Trunk fuse panel
Maintenance
7
7-89
Fuse Name
Fuse rasting
Circuit Protected
DR Lock RH
10A
Passenger Door Module, Rear Door Module RH
DR Lock LH
10A
Driver Door Module, Rear Door Latch LH
S/Heater RR
RH
15A
Rear Seat Warmer Control Module RH, Rear CCS Control Module RH
S/Heater RR
LH
15A
Rear Seat Warmer Control Module LH, Rear CCS Control Module LH
Spare
15A
Spare
Fuse Name
Fuse rasting
Circuit Protected
Start 2
40A
Metal Core Block (PCB #2) (Fuse : F8, F9, F12)
AMS
10A
Battery Sensor
Battery 6
100A
Rear Smart Junction Box (Fuse : F1, F2, F3, F4, F5, F6, F7, F8, F10, F11, F13, F15, F17, F18, F19, F20)
Battery box fuse panel
7-90
Maintenance
LIGHT BULBS
Use only the bulbs of the specified
wattage.
• If you don’t have necessary tools,
the correct bulbs and the expertise,
consult an authorized Kia Premium
dealer. In many cases, it is difficult
to replace vehicle light bulbs
because other parts of the vehicle
must be removed before you can
get to the bulb. This is especially
true if you have to remove the
headlight assembly to get to the
bulb(s).
Removing/installing the headlight
assembly can result in damage to
the vehicle.
• Do not install additional bulb or
LED. If you install that, the lamp
may not be operated properly and
fuse box or electric wiring system
may have problem.
NOTICE
After heavy, driving rain or wash-
ing, headlight and taillight lenses
could appear frosty. This condition
is caused by the temperature differ-
ence between the lamp inside and
outside.
This is similar to the con-
densation on your windows inside
your vehicle during the rain and
doesn’t indicate a problem with
your vehicle.
If the water leaks into
the lamp bulb circuitry, have the
vehicle checked by an authorized
Kia Premium dealer.
Working on the lights
Prior to working on the light,
firmly apply the parking brake,
ensure
that
the
Engine
Start/Stop button is in the LOCK
position and turn off the lights
to avoid sudden movement of
the vehicle and burning your
fingers or receiving an electric
shock.
WARNING
Light Replacement
Be sure to replace the burned-
out bulb with one of the same
wattage rating. Otherwise, it
may cause damage to the fuse
or electric wiring system.
CAUTION