Kia Soul - 2015 Fuse Box Diagram

Kia Soul - 2015 Fuse Box Diagram

Safety features of your vehicle
46
3
If an air bag deploys, there may be a
loud noise followed by a fine dust
released in the vehicle.
These condi-
tions are normal and are not haz-
ardous - the air bags are packed in
this fine powder.
The dust generated
during air bag deployment may
cause skin or eye irritation as well as
aggravate asthma for some persons.
Always wash all exposed skin areas
thoroughly with lukewarm water and
a mild soap after an accident in
which the air bags were deployed.
The SRS can function only when the
ignition switch is in the ON position. If
the SRS air bag warning light does
not
illuminate,
or
continuously
remains on after illuminating for
about 6 seconds when the ignition
switch is turned to the ON position,
or after the engine is started, comes
on while driving, the SRS is not
working properly. If this occurs, have
your vehicle immediately inspected
by an authorized Kia dealer.
NOTICE
Before you replace a fuse or discon-
nect a battery terminal, turn the
ignition switch to the LOCK posi-
tion and remove the ignition switch.
Never remove or replace the air bag
related fuse(s) when the ignition
switch is in the ON position. Failure
to observe this warning will cause
the SRS air bag warning light to illu-
minate.
Occupant Detection System
(ODS)
Your vehicle is equipped with an
occupant detection system in the
front passenger's seat.
The occupant detection system is
designed to detect the presence of a
properly-seated front passenger and
determine if the passenger's front air
bag should be enabled (may inflate)
or not. Only the front passenger front
air bag is controlled by the Occupant
Detection System.
Do not put anything in front of the
passenger air bag
indicator.
WARNING
-
Flying
objects
Do not place any objects (an
umbrella, bag, etc.) between the
front door and the front seat.
Such objects may become dan-
gerous projectiles if the side
airbag inflates.
OPS033020
Features of your vehicle
30
4
Power window lock button
• The driver can disable the power
window switches on the passenger
doors by pressing the power win-
dow lock button located on the dri-
ver’s door to the LOCK position
(pressed).
When the power window lock
switch is pressed :
- The driver's master control can
operate all the power windows.
- The front passenger's control can
operate the front passenger's
power window.
- The rear passenger's control can-
not operate the rear passenger's
power window.
OPS043023
CAUTION
-
Opening /closing Window
To prevent possible damage to
the power window system, do
not open or close two windows
or more at the same time. This
will also ensure the longevity of
the fuse.
4 63
Features of your vehicle
Service Mode
Service Interval
Service in
It calculates and displays when you
need a scheduled maintenance
service (mileage or days).
If the remaining mileage or time
reaches 1,500 km (900 mi.) or 30
days, "Service in" message is dis-
played for several seconds each time
you set the ignition switch or Engine
Start/Stop Button to the ON position.
Service required
If you do not have your vehicle serv-
iced according to the already inputted
service interval, “Service required”
message is displayed for several sec-
onds each time you set the ignition
switch or Engine Start/Stop Button to
the ON position (The mileage and
time changes to "---").
To reset the service interval to the
mileage and days you inputted before:
- Press the RESET button
for
more than 1 second.
Service in OFF
If the service interval is not set,
“Service in OFF” message is dis-
played on the LCD display.
NOTICE
If any of the following conditions
occurs, the mileage and days may be
incorrect.
-
The battery cable is disconnected.
-
The fuse switch is turned off.
-
The battery is discharged.
OPS043134C
OTF044196L
OTF044192L
4 69
Features of your vehicle
Press start button again
(for smart key system)
• This warning message illuminates
if you can not operate the Engine
Start/Stop Button when there is a
problem with the Engine Start/Stop
Button system.
• It means that you could start the
engine by pressing the Engine
Start/ Stop Button once more.
• If the warning illuminates each
time
you
press
the
Engine
Start/Stop Button, have your vehi-
cle inspected by an authorized Kia
dealer.
Press start button with smart key
(for smart key system)
• This warning message illuminates
if you press the Engine Start/Stop
Button while the warning message
“Key not detected” is illuminating.
At this time, the immobilizer indica-
tor light blinks.
Check fuse "BRAKE SWITCH"
(for smart key system and auto-
matic transaxle)
• This warning message illuminates
if the brake switch fuse is discon-
nected.
• It means that you should replace
the fuse with a new one. If that is
not possible, you can start the
engine by pressing the Engine
Start/Stop Button for 10 seconds in
the ACC position.
OTF044146L
OTF044144L
OTF044157L
4 71
Features of your vehicle
Sunroof Open (if equipped)
• The warning message illuminates
if you turn off the engine when the
sunroof is open.
Turn on "FUSE SWITCH"
(if equipped)
• This warning message illuminates
if the fuse switch on the fuse box is
OFF.
• The "FUSE" and "on" warning
messages are displayed alternate-
ly. (for Type A)
• It means that you should turn the
fuse switch on.
For more details, refer to “Fuses” in
chapter 7.
OPS043120
OPS044309L
OPS043405L
Type A
Type B
5 13
Driving your vehicle
• If the battery is weak or the smart
key does not work correctly, you
can start the engine by pressing
the engine start/stop button with
the smart key.
The side with the lock button
should
contact
the
engine
start/stop button directly.
When you press the engine
start/stop button directly with the
smart key, the smart key should
contact the button at a right angle.
(Continued)
(Continued)
When the stop lamp fuse is blown,
you can't start the engine normally.
Replace the fuse with a new one. If
it is not possible, you can start the
engine by pressing the ENGINE
START/STOP button for 10 sec-
onds
while it is in the ACC posi-
tion. The engine can start without
depressing the brake pedal. But for
your safety always depress the
brake pedal before starting the
engine.
Do not press the ENGINE START/
STOP button for more than 10 sec-
onds except when the stop lamp fuse
is blown.
OPS053007
7 3
Maintenance
ENGINE COMPARTMENT
OPS073001
1. Windshield washer fluid reservoir
2. Engine oil filler cap
3. Engine oil dipstick
4. Engine coolant reservoir
5. Radiator cap
6. Brake fluid reservoir
7. Positive battery terminal
8. Negative battery terminal
9. Fuse box
10. Air cleaner
* The actual engine compartment in the vehicle may differ from the illustration.
1.6L GDI
Maintenance
4
7
OPS073002
* The actual engine room in the vehicle may differ from the illustration.
1. Engine coolant reservoir
2. Engine oil filler cap
3. Brake fluid reservoir
4. Air cleaner
5. Fuse box
6. Positive battery terminal
7. Negative battery terminal
8. Windshield washer fluid reservoir
9. Radiator cap
10. Engine oil dipstick
* : if equipped
2.0L GDI
Maintenance
62
7
FUSES
A vehicle’s electrical system is pro-
tected from electrical overload dam-
age by fuses.
This vehicle has 2 (or 3) fuse panels,
one located in the driver’s side panel
bolster, the other in the engine com-
partment near the battery.
If any of your vehicle’s lights, acces-
sories, or controls do not work, check
the appropriate circuit fuse. If a fuse
has blown, the element inside the
fuse will
melt.
If the electrical system does not
work, first check the driver’s side
fuse panel.
Always replace a blown fuse with
one of the same rating.
If the replacement fuse blows, this
indicates an electrical problem. Avoid
using the system involved and imme-
diately consult an authorized Kia
dealer.
Three kinds of fuses are used: micro
mini type for lower amperage rating,
cartridge type, and multi fuse for
higher amperage ratings.
WARNING
-
Fuse
replacement
Never replace a fuse with any-
thing but another fuse of the
same rating.
• A higher capacity fuse could
cause damage and possibly a
fire.
• Never install a wire or alu-
minum foil instead of the
proper fuse - even as a tem-
porary repair. It may cause
extensive wiring damage and
a possible fire.
Replace the fuse with the igni-
tion “OFF”, switch off of all
electrical devices and then
separation (-) terminal from
the battery in a safe place.
• Do not arbitrarily modify or
add-on electric wiring of the
vehicle.
OLM079051N
Normal
Normal
Blade type
Cartridge type
Multi fuse
Blown
Blown
Normal
Blown
Normal
Blown
7 63
Maintenance
NOTICE
The actual fuse/relay panel label
may differ from equipped items.
Inner panel fuse replacement
1. Turn the ignition switch and all
other switches off.
2. Open the fuse panel cover.
OPS073014
CAUTION
Do not use a screwdriver or any
other metal object to remove
fuses because it may cause a
short circuit and damage the
system.
WARNING
- Fuse fire
• When replacing a blown fuse
or relay with a new one, make
sure the new fuse or relay fits
tightly into the clips The
incomplete fastening fuse or
relay may cause the vehicle
wiring and electric systems
damage and a possible fire.
• Do not remove fuses, relays
and terminals fastened with
bolts or nuts.
The fuses,
relays and terminals may be
fastened incompletely, and it
may cause a possible fire. If
fuses, relays and terminals
fastened with bolts or nuts are
blown, we recommend that
you consult with an author-
ized Kia dealer.
Do not plug in screwdrivers or
aftermarket wiring into the ter-
minal originally designed for
fuse and relays only.The elec-
trical system and wiring of the
vehicle interior may be dam-
aged or burned due to contact
failure.
Maintenance
64
7
3. Pull the suspected fuse straight
out. Use the fuse puller provided
on the
engine compartment fuse
panel cover.
4. Check the removed fuse; replace it
if it is blown.
Spare fuses are provided in the
engine compartment fuse panel.
5. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips.
If it fits loosely, consult an authorized
Kia dealer.
If you do not have a spare, use a
fuse of the same rating from a circuit
you may not need for operating the
vehicle, such as the power outlet
fuse.
If the headlights or other electrical
components do not work and the
fuses are OK, check the fuse panel
in the engine compartment. If a fuse
is blown, it must be replaced.
Fuse switch
Always, put the fuse switch at the ON
position.
If you move the switch to the OFF
position, some items such as audio
and digital clock must be reset and
transmitter (or smart key) may not
work properly.
OPS073015
OPS073017
7 65
Maintenance
NOTICE
If you need to park your vehicle for
prolonged periods more than 1
month, move the transportation fuse
switch to the OFF position to pre-
vent the battery being discharged.
Engine compartment fuse
replacement
1. Turn the ignition switch and all
other switches off.
2. Remove the fuse panel cover by
pressing the tab and pulling the
cover up. When the blade type
fuse is disconnected, remove it by
using the clip designed for chang-
ing fuses located in the engine
room fuse box. Upon removal,
securely insert reserve fuse of
equal quantity.
3. Check the removed fuse; replace it
if it is blown. To remove or insert
the fuse, use the fuse puller in the
engine compartment fuse panel.
4. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips. If it fits loosely, consult
an authorized Kia dealer.
OPS073016
CAUTION
-
Fuse panel
covers
After checking the fuse panel in
the
engine
compartment,
securely install the fuse panel
cover with using cover locking
sound. If not, electrical failures
may occur from water contact.
Maintenance
66
7
Multi fuse
If the multi fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery
cable.
3. Remove the nuts shown in the pic-
ture above.
4. Replace the fuse with a new one
of the same rating.
5. Reinstall in the reverse order of
removal.
NOTICE
If the multi fuse is blown, consult an
authorized Kia dealer.
OPS073039
7 67
Maintenance
Fuse/relay panel description
Inside the fuse/relay panel covers,
you can find the fuse/relay label
describing fuse/relay name and
capacity.
NOTICE
Not all fuse panel descriptions in
this manual may be applicable to
your vehicle. It is accurate at the
time of printing. When you inspect
the fuse panel in your vehicle, refer
to the fuse panel label.
OPS073014
OPS073018
Maintenance
68
7
Inner fuse panel
Description
Fuse rating
Protected component
POWER OUTLET 2
20A
P_OUTLET
ACC
10A
O_S_MIRR_SW, AMP, AUDIO/UVO/AVN 4.0_HEAD UNIT, BCM, TMU, MOOD_LAMP_UNIT,
SMK_UNIT, LDC_AMP(400W), LDC_AMP(200W)
POWER OUTLET 1
25A
C/LIGHT, REAR_P_OUTLET
DRL
10A
BCM(DAY_RUNNNIG_LIGHT_LAMP_POWER)
MODULE 6
7.5A
SUNROOF_MOTOR, LUGGAGE_PORTABLE_LAMP(CHARGE_POWER), SEAT_EXTN_DRV(HEAT-
ED), REAR_SEAT(IGN2)
WIPER FRT 2
25A
FRONT_WIPER_MOTOR(POWER), FRONT_WIPER_RLY(LOW)
WIPER RR
15A
REAR_WIPER_MOTOR, MULTI_FUNCTION_SW(WIPER), REAR_WIPER_RLY,
REAR_WIPER_RLY_COIL,
AMP
30A
AMP, LDC_AMP(400W)
MODULE 5
7.5A
BCM, SMK_UNIT
WIPER FRT 1
10A
MULTI_FUNCTION_SW(WIPER), BCM(WASHER_MOTOR_POWER),
HTD STRG
15A
STEERING_HEATED
A/CON 1
7.5A
AIR_CONTROL_UNIT(MANUAL, AUTO), IONIZER, PTC_RLY_COIL, BLOWER_RLY_COIL
HTD MIRR
10A
OUTSIDE_MIRROR(HEATED), ECU(ELEC. LOAD DEFROST),
AIR_CONTROL_UNIT_MANUAL/AUTO(HEATED_SIGNAL)
7 69
Maintenance
Description
Fuse rating
Protected component
T/GATE OPEN
15A
T/GATE_OPEN_RLY(T/GATE_LATCH_MOTOR), T/GATE_OPEN_RLY_COIL
S/HEATER FRT
20A
FRONT_SEAT_EXTN(HEATED_POWER)
DR LOCK
20A
DOOR_LOCK_RLY, DOOR_LOCK_RLY_COIL, DOOR_UNLOCK_RLY_COIL, DEAD_LOCK_RLY,
DEAD_LOCK_RLY_COIL
A/BAG IND
7.5A
CLUSTER
A/BAG
15A
ACU, WCS_ECU
MODULE 4
10A
I_S_MIRR_ECM, AUTO_HLLD_ECU
STOP LAMP
15A
HAZARD_SW(ESS_INDICATOR_POWER), STOP_SIGNAL_ELECTRONIC_MODULE
MODULE 7
10A
SPORTS_MODE_SW(ATM_SHIFT_LOCK_SOLENOID), KEY_LOCK_SOLENOID
S/HEATER RR
20A
REAR_SEAT(HEATED_POWER)
P/WDW RH
25A
FRONT_P/WINDOW_SW(POWER), P/WINDOW_SAFETY_ECU(POWER)
P/WDW LH
25A
FRONT_P/WINDOW_SW(POWER), P/WINDOW_SAFETY_ECU(POWER)
MODULE 1
10A
BCM, SEAT_EXTN_DRV
BRAKE SWITCH 1
10A
ABS/ESP_UNIT, LDC_AMP(400W)
MODULE 2
10A
LOWER_SW, CENTER_SW, TPMS_UNIT, REAR_PARKING_ASSIST_SYSTEM_SNSR, SMART_PARK-
ING_ASSIST_SYSTEM_SNSR, SMART_PARKING_ASSIST_SYSTEM_UNIT,
AIR_CONTROL_UNIT(MANUAL, AUTO), LANE_DEPARTURE_WARNING_SYSTEM_UNIT,
STOP_LP_SW, WATER_FUEL_SNSR
Maintenance
70
7
Description
Fuse rating
Protected component
MODULE 3
10A
SHIFT_LEVER_MODULE, REAR_SEAT_WARMER_SW, REAR_SEAT_WARMER, DIAGNOSIS, AVN
4.0_HEAD_UNIT, LDC_AMP(200W), TMU, HLLD_SW, HLLD_ACTR, OIL_LEVEL_SNSR,
ECU
7.5A
ENGINE_CONTROL_UNIT, AIR_FLOW_SNSR, START_RLY_COIL, SMK_UNIT, SMATRA_IMMOBI-
LIZATION
I.O.D 2
15A
LDC_AMP(200W), AUDIO/UVO/AVN4.0_HEAD_UNIT, TMU
I.O.D 3
7.5A
OUTSIDE_MIRROR_FOLDING_RLY, OUTSIDE_MIRROR_FOLDING_RLY_COIL, OUTSIDE_MIR-
ROR_UNFOLDING_RLY, OUTSIDE_MIRROR_UNFOLDING_RLY_COIL
CLUSTER
10A
CLUSTER
TCU
15A
SPEED_SNSR (MT), BACK_UP_LAMP_SW, OIL_PUMP_INVERTER, INHIBITOR,
TRANSMISSION_CONTROL_UNIT
I.O.D 4
7.5A
OBDII(POWER), TPMS_UNIT(POWER), CLUSTER, AIR_CONTROL_UNIT(MANUAL, AUTO), BCM,
REAR_PARKING_ASSIST_SYSTEM_BUZZER
SPARE
10A
-
SUNROOF 2
20A
SUNROOF_MOTOR(POWER)
P/SEAT DRV
30A
FRNT_SEAT_EXTN(POWER)
SUNROOF 1
20A
SUNROOF_MOTOR(POWER)
MDPS
7.5A
MDPS_UNIT
A/CON 2
7.5A
AIR_CONTROL_UNIT_MANUAL(MAX_BLOWER), AIR_CONTROL_UNIT_AUTO(BLOWER_MOTOR)
START
7.5A
E/R_FUSE & RELAY_BOX(RELAY - START / SUB START), PDM
7 71
Maintenance
Description
Fuse rating
Protected component
I.O.D 1
7.5A
GLOVE_BOX_LAMP, DOOR_WARNING_SW, OVER_HEAD_CONSOLE_LAMP, PERSONAL_LAMP,
SUNVISOR_LAMP, LUGGAGE_LAMP, PORTABLE_LAMP(DOOR)
PDM 2
7.5A
SMK_UNIT(BATT_CPU), SMATRA_IMMOBILIZATION(BATT)
PDM 1
20A
SMK_UNIT(POWER)
BRAKE SWITCH 2
10A
STOP_LAMP_SW(NORMAL_OPEN), SMK_UNIT
Maintenance
72
7
Engine compartment fuse panel
OPS073013
OPS073019
7 73
Maintenance
Engine compartment fuse panel
Description
Fuse rating
Protected component
IG1
40A
IGN_SW(B1), BUTTON_START_RLY(IG1), BUTTON_START_RLY(ACC)
BLOWER
40A
BLOWER_RLY, BLOWER_MOTOR
RR HTD
40A
REAR_GLASS_HEATED_RLY,
ECU 2
30A
MAIN_RLY, MAIN_RLY_COIL
ECU 3
15A
ECU(AFTER_AIN_RELAY)
IGN COIL
20A
IGNITION_COIL(POWER)
ECU 1
20A
ECU(AFTER_MAIN_RELAY)
SENSOR 1
10A
STOP_LAMP_SW(NORMAL_CLOSE), O2_SNSR, PURGE_CONTROL_SOLENOID_VALVE, OCV,
SENSOR 2
10A
CMP, COOLING_FAN_LOW_RLY_COIL
INJECTOR
10A
-
B/UP LAMP
10A
RR_COMBI_LAMP(BACK_UP_LAMP)
WIPER
10A
ECU(WIPER_SWITCH)
F/PUMP
15A
FUEL_PUMP_MOTOR
HORN
15A
HORN_RLY, HORN_RLY_COIL, HORN
H/LAMP WASHER
20A
HEAD_LAMP_WASHER_RLY, HEAD_LAMP_WASHER_RLY_COIL, HEAD_LAMP_WASHER_MOTOR
Maintenance
74
7
Description
Fuse rating
Protected component
B+ 1
50A
SMART_JUNCTION_BLOCK(B+1)
B+ 2
50A
SMART_JUNCTION_BLOCK(B+2)
B+ 3
50A
SMART_JUNCTION_BLOCK(B+3)
IG2
40A
IGN_SW(IG2), BUTTON_START_RLY(IG2), START_RLY
MDPS
80A
MDPS_UNIT
ALT
125A
ALTERNATOR
TCU
20A
TRANSMISSION_CONTROL_UNIT
DEICER
20A
DEICER
ECU 4
15A
ECU(BATT_DIRECT)
ECU 5
15A
ECU(BATT_DIRECT)
A/CON
10A
A/CON_RLY
C/FAN
40A
COOLING_FAN_MOTOR, SUB_FUEL_PUMP, SUB_FUEL_VALVE
INVERTER
50A
OIL_PUMP_INVERTER
ABS 1
40A
ABS/ESP_UNIT(MOTOR)
ABS 2
30A
ABS/ESP_UNIT(SOLENOID)
7 75
Maintenance
LIGHT BULBS
Use only the bulbs of the specified
wattage.
• If you don’t have necessary tools,
the correct bulbs and the expertise,
consult an authorized Kia dealer. In
many cases, it is difficult to replace
vehicle light bulbs because other
parts of the vehicle must be
removed before you can get to the
bulb. This is especially true if you
have to remove the headlight
assembly to get to the bulb(s).
Removing/installing the headlight
assembly can result in damage to
the vehicle.
• Do not install additional bulb or
LED. If you install that, the lamp
may not be operated properly and
fuse box or electric wiring system
may have problem.
Headlight, position light, turn
signal light, side marker light
and front fog light bulb
replacement
WARNING
- Lights
Prior to working on the light,
firmly apply the parking brake,
ensure that the ignition switch
is turned to the LOCK position
and turn off the lights to avoid
sudden movement of the vehi-
cle and burning your fingers or
receiving an electric shock.
CAUTION
-
Light replacement
Be sure to replace the burned-
out bulb with one of the same
wattage rating.
Otherwise,
it
may cause damage to the fuse
or electric wiring system.
OPS073020
Type A
OPS073021
Type B