Ford Sable - 2005 Fuse Box Diagram

Ford Sable - 2005 Fuse Box Diagram

ILLUMINATED VISOR MIRROR (IF EQUIPPED)
Lift the mirror cover to turn on the
visor mirror lamp. The visor will
slide back and forth on the rod for
increased sunlight coverage.
AUXILIARY POWER POINT
Power outlets are designed for accessory plugs only. Do not hang
any type of accessory or accessory bracket from the plug.
Improper use of the power outlet can cause damage not covered
by your warranty.
Do not plug optional electrical accessories into the cigarette lighter. Use
the power point.
Do not use the power point for operating the cigarette lighter element.
The Maximum power each power point can supply depends on the fuse
rating. For example: a 20A fuse should supply a maximum of 240 Watts,
a 15A fuse should supply a maximum of 180 Watts and a 10A fuse should
supply a maximum of 120 Watts. Exceeding these limits will result in a
blown fuse.
Always keep the power point caps closed when not being used.
The auxiliary power point is located on the instrument panel below the
optional cigarette lighter (if equipped).
POWER WINDOWS
Do not leave children unattended in the vehicle and do not let
children play with the power windows. They may seriously injure
themselves.
When closing the power windows, you should verify they are free
of obstructions and ensure that children and/or pets are not in
the proximity of the window openings.
Driver Controls
47
Do not attempt to service, repair, or modify the air bag
supplemental restraint system (SRS) or its fuses. See your Ford
or Lincoln Mercury dealer.
The front passenger air bag is not designed to offer protection to
an occupant in the center front seating position.
Modifying or adding equipment to the front end of the vehicle
(including frame, bumper, front end body structure and tow
hooks) may affect the performance of the air bag system, increasing
the risk of injury. Do not modify the front end of the vehicle.
Children and air bags
Children must always be properly
restrained. Accident statistics
suggest that children are safer when
properly restrained in the rear
seating positions than in the front
seating position. Failure to follow
these instructions may increase the
risk of injury in a collision.
Air bags can kill or injure a
child in a child seat.
NEVER
place a rear-facing child
seat in front of an active air bag. If
you must use a forward-facing
child seat in the front seat, move
the seat all the way back.
Seating and Safety Restraints
109
A difficulty with the system is indicated by one or more of the following:
The readiness light (same light
for front and side air bag system)
will either flash or stay lit.
The readiness light will not
illuminate immediately after ignition is turned on.
A series of five beeps will be heard. The tone pattern will repeat
periodically until the problem and/or light are repaired.
If any of these things happen, even intermittently, have the supplemental
restraint system serviced at your dealership or by a qualified technician
immediately. Unless serviced, the system may not function properly in
the event of a collision.
Side air bag system (if equipped)
Do not place objects or mount equipment on or near the air bag
cover on the side of the seatbacks of the front seats or in front
seat areas that may come into contact with a deploying air bag. Failure
to follow these instructions may increase the risk of personal injury in
the event of a collision.
Do not use accessory seat covers. The use of accessory seat
covers may prevent the deployment of the side air bags and
increase the risk of injury in an accident.
Do not lean your head on the door. The side air bag could injure
you as it deploys from the side of the seatback.
Do not attempt to service, repair, or modify the air bag SRS, its
fuses or the seat cover on a seat containing an air bag. See your
Ford or Lincoln Mercury dealer.
All occupants of the vehicle should always wear their safety belts
even when an air bag SRS is provided.
Seating and Safety Restraints
114
Some noise is normal during operation. If the noise is excessive, check
for low power steering pump fluid level before seeking service by your
dealer.
Heavy or uneven steering efforts may be caused by low power steering
pump fluid level. Check for low power steering pump fluid level before
seeking service by your dealer.
Do not fill the power steering pump reservoir above the MAX mark on
the reservoir, as this may result in leaks from the reservoir.
If the power steering system breaks down (or if the engine is turned
off), you can steer the vehicle manually, but it takes more effort.
If the steering wanders or pulls, check for:
an improperly inflated tire
uneven tire wear
loose or worn suspension components
loose or worn steering components
improper steering alignment
AUTOMATIC TRANSAXLE OPERATION
Brake-shift interlock
This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the ON position unless brake pedal is depressed.
If you cannot move the gearshift lever out of P (Park) with ignition in
the ON position and the brake pedal depressed:
1. Apply the parking brake, turn ignition key to LOCK, then remove the
key.
2. Insert the key and turn it to OFF.
Apply the brake pedal and shift
to N (Neutral)
.
When the key is in the ignition and in the OFF position, the
automatic transmission shift lever can be moved from the P
(Park) position without the brake pedal depressed. To avoid unwanted
vehicle movement, always set the parking brake.
3. Start the vehicle.
If it is necessary to use the above procedure to move the gearshift lever,
it is possible that a fuse has blown or the vehicle’s brakelamps are not
operating properly. Refer to
Fuses and relays
in the
Roadside
Emergencies
chapter.
Driving
137
FUSES
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
Maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Amber
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
70A
Tan
Brown
80A
Natural
Black
Passenger compartment fuse panel
The fuse panel is located below and to the left of the steering wheel by
the brake pedal. Remove the panel cover to access the fuses.
15
Roadside Emergencies
151
To remove a fuse use the fuse puller tool provided on the fuse panel
cover.
The fuses are coded as follows.
Fuse/relay
location
Fuse amp
rating
Passenger compartment fuse panel
description
1
Accessory delay relay
2
Driver one touch down relay
3
Blower motor relay
4
Flasher relay
5
Not used
6
Not used
7
20A
Rear defrost grid feed (wagon only)/
Rear defrost relay coil feed (sedan only)
8
40A
Blower motor
9
Rear defrost relay
10
30A CB
Power seats, Delayed accessory,
Adjustable pedals
11
10A
Right headlamp
12
15A
Highbeam headlamps
13
Not used
14
Not used
15
10A
Left headlamp
16
10A
Foglamps
Roadside Emergencies
152
Fuse/relay
location
Fuse amp
rating
Passenger compartment fuse panel
description
17
15A
Stop lamp, Speed control deactivation
switch
18
15A
Parklamps, PWM (backlighting),
Autolamps
19
10A
Heated mirrors, Rear defrost switch
indicator
20
10A
Restraints (air bag module/OCS module)
21
15A
Transmission range sensor (transmission
position switch)
22
15A
Front washer pump, Electrochromatic
mirror, Compass, Cluster (RUN/ACC),
Integrated Control Panel (ICP) logic,
Rear wiper (wagon only), Rear washer
(wagon only)
23
30A
Front wiper motor
24
Not used
25
20A
Power point
26
20A
Power locks, Liftgate (wagon)/Trunk
(sedan) release
27
10A
Anti-lock Brake System (ABS), Speed
control, Traction control, Brake-shift
interlock, A/C function switch (manual
A/C only), Temperature blend door
(manual A/C only), Defrost coil
28
15A
Turn signals, Back-up lamps
29
20A
Cigar lighter
30
10A
Courtesy lighting, Battery saver, Power
mirrors, Decklid lamp, Power antenna
(wagon only), Pulse stretching module
(wagon only)
31
10A
Blower motor relay coil, Puddle lamp
relay coil, Electronic Automatic
Temperature Control (EATC) logic
32
10A
Cluster, Flex fuel module, ICP logic,
Passive anti-theft module (GEM power)
33
15A
Hazard flasher, Cluster power, ICP
power, EATC
Roadside Emergencies
153
Fuse/relay
location
Fuse amp
rating
Passenger compartment fuse panel
description
34
5A
GEM logic
35
10A
Backlighting
36
2A
Powertrain Control Module (PCM) relay,
Fuel pump relay, A/C clutch
37
25A
Autolamp, Daytime Running Lamps
(DRL), Flash-to-pass, Headlamp switch
38
15A
Horn, Diagnostic connector (OBD II)
39
Not used
40
Not used
41
Not used
42
Not used
CB - Circuit Breaker
Power distribution box
The power distribution box is
located in the engine compartment.
The power distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
from overloads.
Always disconnect the battery before servicing high current
fuses.
Roadside Emergencies
154
To reduce risk of electrical shock, always replace the cover to
the Power Distribution Box before reconnecting the battery or
refilling fluid reservoirs.
If the battery has been disconnected and reconnected, refer to the
Battery
section of the chapter.
The high-current fuses are coded as follows.
Fuse/relay
location
Fuse amp rating
Power distribution box
description
1
60A**
Fuse junction panel
2
30A**
Powertrain Control Module (PCM)
3
60A**
Fuse junction panel
4
10A CB
Low speed cooling fan
5
40A**
Cooling fan
6
Not used
7
40A**
Starter relay, Ignition switch
8
Not used
9
20A**
Cooling fan (passenger side)
10
20A**
Cooling fan (driver side)
11
50A**
Rear defrost (sedan only)
12
Not used
13
40A**
Anti-lock Brake System (ABS)
module pump feed
14
Not used
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21 22
23
24
25
29
30
26
27
28
31
32
33
Roadside Emergencies
155
Fuse/relay
location
Fuse amp rating
Power distribution box
description
15
20A*
ABS module valve solenoid
16
20A*
Fuel pump relay
17
20A*
CD
18
10A* (Vulcan engine only)
A/C clutch relay, PCM keep alive power
— (Duratec engine only)
Not used
19
Not used
20
Not used
21
Not used
22
5A* (Vulcan engine only)
Heated PCV valve
10A* (Duratec engine only)
A/C clutch relay, PCM keep alive power
23
Starter motor relay
24
Fan relay
25
Wiper speed relay
26
10A*
Alternator
27
5A*
Rear control unit, Antenna
28
15A*
HEGO sensor, Transmission shift
solenoid, Canister vent, A/C clutch
relay
29
Wiper park relay
30
Fuel pump relay
31
PCM power relay
32
Fan relay
33
A/C clutch relay
* - Mini Fuses ** - Maxi Fuses CB - Circuit breaker
Relays
Relays are located in the power distribution box and should be replaced
by qualified technicians.
CHANGING THE TIRES
If you get a flat tire while driving, do not apply the brake heavily.
Instead, gradually decrease your speed. Hold the steering wheel firmly
and slowly move to a safe place on the side of the road.
The use of tire sealants is not recommended and may damage
your tires.
Roadside Emergencies
156