Ford Ranger - 2011 Fuse Box Diagram

Ford Ranger - 2011 Fuse Box Diagram

AUXILIARY POWER POINT (12V DC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
The auxiliary power points are located on the instrument panel.
Do not use the power point for operating the cigarette lighter element (if
equipped).
To prevent the fuse from being blown, do not use the power point(s)
over the vehicle capacity of 12V DC/180W. If the power point or cigar
lighter socket is not working, a fuse may have blown. Refer to
Fuses and
relays
in the
Roadside Emergencies
chapter for fuse ratings and
information on checking and replacing fuses.
To have full capacity usage of your power point, the engine is required to
be running to avoid unintentional discharge of the battery. To prevent
the battery from being discharged:
do not use the power point longer than necessary when the engine is
not running,
do not leave battery chargers, video game adapters, computers and
other devices plugged in overnight or when the vehicle is parked for
extended periods.
Always keep the power point caps closed when not being used.
POWER WINDOWS (IF EQUIPPED)
WARNING:
Do not leave children unattended in the vehicle and
do not let children play with the power windows. They may
seriously injure themselves.
WARNING:
When closing the power windows, you should verify
they are free of obstructions and ensure that children and/or
pets are not in the proximity of the window openings.
Driver Controls
50
2011 Ranger
(ran)
Owners Guide, 1st Printing
USA
(fus)
WARNING:
National Highway Traffic Safety Administration
(NHTSA) recommends a minimum distance of at least 25 cm
(10 inches) between an occupant’s chest and the driver airbag module.
WARNING:
Never place your arm over the air bag module as a
deploying airbag can result in serious arm fractures or other
injuries.
Steps you can take to properly position yourself away from the airbag:
Move your seat to the rear as far as you can while still reaching the
pedals comfortably.
Recline the seat slightly (one or two degrees) from the upright
position.
WARNING:
Do not put anything on or over the airbag module.
Placing objects on or over the airbag inflation area may cause
those objects to be propelled by the airbag into your face and torso
causing serious injury.
WARNING:
Do not attempt to service, repair, or modify the
Airbag Supplemental Restraint System or its fuses. Contact your
authorized dealer as soon as possible.
WARNING:
The front passenger airbag is not designed to offer
protection to an occupant in the center front seating position.
WARNING:
Modifying or adding equipment to the front end of
the vehicle (including frame, bumper, front end body structure
and tow hooks) may affect the performance of the airbag system,
increasing the risk of injury. Do not modify the front end of the
vehicle.
WARNING:
Additional equipment may affect the performance of
the airbag sensors increasing the risk of injury.
Seating and Safety Restraints
84
2011 Ranger
(ran)
Owners Guide, 1st Printing
USA
(fus)
Seat-mounted side airbag system
WARNING:
Do not place objects or mount equipment on or
near the airbag cover on the side of the seatbacks of the front
seats or in front seat areas that may come into contact with a
deploying airbag. Failure to follow these instructions may increase the
risk of personal injury in the event of a collision.
WARNING:
Do not use accessory seat covers. The use of
accessory seat covers may prevent the deployment of the side
airbags and increase the risk of injury in an accident.
WARNING:
Do not lean your head on the door. The side airbag
could injure you as it deploys from the side of the seatback.
WARNING:
Do not attempt to service, repair, or modify the
airbag SRS, its fuses or the seat cover on a seat containing an
airbag. See an authorized dealer.
WARNING:
All occupants of the vehicle should always wear
their safety belts even when an airbag SRS is provided.
How does the side airbag system work?
The design and development of the
side airbag system included
recommended testing procedures
that were developed by a group of
automotive safety experts known as
the Side Airbag Technical Working
Group. These recommended testing
procedures help reduce the risk of
injuries related to the deployment of
side airbags.
Seating and Safety Restraints
91
2011 Ranger
(ran)
Owners Guide, 1st Printing
USA
(fus)
If you cannot move the gearshift lever out of P (Park) with the ignition
in the on position and the brake pedal pressed, it is possible that a fuse
has blown or the vehicle’s brake lamps are not operating properly. Refer
to
Fuses and relays
in the
Roadside Emergencies
chapter.
If the fuse is not blown and the brake lamps are working properly, the
following procedure will allow you to move the gearshift lever from P
(Park):
1. Apply the parking brake, and turn
the ignition to the on position.
2. Remove the lower trim panel
under the steering column. Make
sure not disturb the wires on the
electrical connector.
3. Locate the BSI solenoid
underneath the steering column.
4. With your hand, pull back on the
solenoid, and at the same time, shift
the transmission into N (Neutral).
5. Start the vehicle.
See your authorized dealer as
soon as possible if this
procedure is used.
WARNING:
Do not drive your vehicle until you verify that the
brakelamps are working.
WARNING:
Always set the parking brake fully and make sure
the gearshift is latched in P (Park). Turn the ignition to the lock
position and remove the key whenever you leave your vehicle.
WARNING:
If the parking brake is fully released, but the brake
warning lamp remains illuminated, the brakes may not be
working properly. See your authorized dealer.
Driving
165
2011 Ranger
(ran)
Owners Guide, 1st Printing
USA
(fus)
The fuel pump shut-off switch is
located on the right side of the
passenger footwell, behind the fuse
panel door.
To reset the switch:
1. Turn the ignition off.
2. Check the fuel system for leaks.
3. If no leaks are apparent, reset the
switch by pressing the reset button.
4. Turn the ignition on.
5. Wait a few seconds and return
the key to off.
6. Make another check for leaks.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
15
Roadside Emergencies
181
2011 Ranger
(ran)
Owners Guide, 1st Printing
USA
(fus)
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
Yellow
70A
Tan
Brown
80A
Natural
Black
Black
Passenger compartment fuse panel
The fuse panel is located under the
right-hand side of the instrument
panel, behind the kick panel. A fuse
puller tool is located near the lower
right corner of the fuse box; this
tool will assist you in pulling the
fuses out for inspection, if
necessary.
Roadside Emergencies
182
2011 Ranger
(ran)
Owners Guide, 1st Printing
USA
(fus)
The fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
1
5A
Instrument panel dimmer switch
2
10A
Trailer tow park lamps
3
10A
Right low beam headlamp
4
10A
Left low beam headlamp
5
5A
Windshield wiper module
(run/accy)
6
10A
Radio (run/accy), Door switch
illumination
7
Not used
8
10A
Restraints control module (RCM),
Passenger airbag deactivation
indicator (PADI), Occupant
classification sensor (OCS)
15
25
2
1
3 4
5 6
8 9
11 12
7
10
13 14
17 18
20 21 22 23 24
16
19
27 28 29 30 31
26
32 33 34 35
Roadside Emergencies
183
2011 Ranger
(ran)
Owners Guide, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
9
5A
Cluster air bag indicator
10
10A
Cluster (run/start), 4x4 module
(run/start)
11
10A
Passenger compartment fuse
panel (Logic power)
12
15A
Satellite radio
13
15A
Horn, Interior lamps
14
15A
High beam headlamp, High beam
indicator (cluster)
15
Not used
16
30A cartridge
fuse
Power windows
17
15A
Turn signals/hazards
18
Not used
19
20A
Center high-mounted stop lamp
(CHMSL)/Stop lamps
20
10A
Speed control module, Back-up
lamps, Overdrive cancel switch,
Electronic flasher (turn),
Anti-lock brake system (ABS)
(roll stability control)
21
5A
Starter relay coil
22
5A
Not used (spare)
23
30A
Headlamps (low and high beam)
24
20A
Radio battery feed (B+)
25
Accessory relay (power windows)
26
2A
Redundant cruise switch
27
10A
Climate control blower relay/blend
doors
28
15A
4x4 module battery feed (B+)
29
20A
Cigar lighter, Diagnostic connector
(OBD II)
Roadside Emergencies
184
2011 Ranger
(ran)
Owners Guide, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
30
5A
Power mirrors
31
20A
Front park lamps, Rear park
lamps, License plate lamps,
Dimmer switch, Trailer tow park
lamps
32
5A
Brake switch (logic)
33
5A
Instrument cluster battery feed
(B+)
34
20A
Power point
35
15A
Power locks
Power distribution box
The power distribution box is
located in the engine compartment.
The power distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
from overloads.
WARNING:
Always disconnect the battery before servicing high
current fuses.
WARNING:
To reduce risk of electrical shock, always replace
the cover to the Power Distribution Box before reconnecting the
battery or refilling fluid reservoirs.
Roadside Emergencies
185
2011 Ranger
(ran)
Owners Guide, 1st Printing
USA
(fus)
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and Specifications
chapter.
2.3L engine (if equipped)
The high-current fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
1
40A**
Passenger compartment fuse
panel
2
Not used
3
40A**
Passenger compartment fuse
panel
4
Not used
5
50A**
Passenger compartment fuse
panel
6
Not used
7
30A**
Starter solenoid
8
Not used
9
40A**
Ignition switch
Roadside Emergencies
186
2011 Ranger
(ran)
Owners Guide, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
10
Not used
11
30A**
Powertrain control module (PCM)
relay
12
Not used
13
30A**
Blower motor (climate control)
14
Not used
15
Not used
16
Not used
17
40A**
Anti-lock brake system (ABS)
module
18
Not used
19
20A**
Engine fan
20
Not used
21
10A*
PCM keep alive power, Canister
purge valve solenoid
22
Not used
23
30A*
Fuel pump motor, Fuel injectors
24
Not used
25
10A*
A/C clutch solenoid
26
Not used
27
Not used
28
Not used
29
30A*
Wipers/washer
30
Not used
31
15A*
Fog lamps
32
Not used
33
30A*
Anti-lock brake system (ABS)
module
34
Not used
35
Not used
36
Not used
37
Not used
Roadside Emergencies
187
2011 Ranger
(ran)
Owners Guide, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
38
7.5A*
Trailer tow (right turn)
39
15A*
PCM power
40
Not used
41
10A*
Automatic transmission
42
7.5A*
Trailer tow (left turn)
43
20A*
Engine fan relay coil, A/C relay
coil, IAC, Mass air flow sensor,
Heated exhaust gas oxygen
sensor, Catalyst module sensor,
Vapor management valve solenoid
44
15A*
Ignition coil, Capacitor
45A
Not used
45B
Not used
46A
Fuel pump relay, Fuel injectors
relay
46B
Not used
47
Engine fan relay
48
Starter relay
49
Not used
50
Not used
51
Not used
52
Not used
53
Not used
54
PCM relay
55
Blower relay
56A
A/C clutch solenoid relay
56B
Fog lamp relay
* Mini Fuses ** Maxi Fuses
Roadside Emergencies
188
2011 Ranger
(ran)
Owners Guide, 1st Printing
USA
(fus)
4.0L engines (if equipped)
The high-current fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
1
40A**
Passenger compartment fuse panel
2
Not used
3
40A**
Passenger compartment fuse panel
4
Not used
5
50A**
Passenger compartment fuse panel
6
Not used
7
30A**
Starter solenoid
8
Not used
9
40A**
Ignition switch
10
Not used
11
30A**
Powertrain control module (PCM)
relay
12
Not used
13
30A**
Blower motor (climate control)
14
Not used
Roadside Emergencies
189
2011 Ranger
(ran)
Owners Guide, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
15
Not used
16
Not used
17
40A**
Anti-lock brake system (ABS) module
18
Not used
19
Not used
20
Not used
21
10A*
PCM keep alive power, Canister purge
valve solenoid
22
Not used
23
30A*
Fuel pump motor, Fuel injectors
24
Not used
25
10A*
A/C clutch solenoid
26
Not used
27
20A*
4x4 module
28
Not used
29
30A*
Wipers/washer
30
Not used
31
15A*
Fog lamps
32
Not used
33
30A*
ABS module
34
Not used
35
Not used
36
Not used
37
Not used
38
7.5A*
Trailer tow (right turn)
39
15A*
PCM power
40
Not used
41
10A*
Automatic transmission
42
7.5A*
Trailer tow (left turn)
Roadside Emergencies
190
2011 Ranger
(ran)
Owners Guide, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
43
20A*
A/C relay coil, IAC, Mass air flow
sensor, Heated exhaust gas oxygen
sensor, Catalyst module sensor, Vapor
management valve solenoid, EGR
solenoid, Heated PCV
44
15A*
Ignition coil, Capacitor
45A
Not used
45B
Not used
46A
A/C clutch solenoid
46B
Not used
47
PCM relay
48A
Fuel pump relay, Fuel injectors relay
48B
Fog lamp relay
51
Not used
52
Not used
53
Not used
54
Not used
55
Blower relay
56
Starter relay
* Mini Fuses ** Maxi Fuses
CHANGING THE TIRES
If you get a flat tire while driving, do not apply the brake heavily.
Instead, gradually decrease your speed. Hold the steering wheel firmly
and slowly move to a safe place on the side of the road.
Note:
The tire pressure monitoring system (TPMS) indicator light will
illuminate when the spare tire is in use. To restore the full functionality
of the monitoring system, all road wheels equipped with tire pressure
monitoring sensors must be mounted on the vehicle.
Have a flat serviced by an authorized dealer in order to prevent damage
to the TPMS sensors, refer to
Tire pressure monitoring system
(TPMS)
in the
Tires, Wheels and Loading
chapter. Replace the spare
tire with a road tire as soon as possible. During repairing or replacing of
the flat tire, have the authorized dealer inspect the TPMS sensor for
damage.
Roadside Emergencies
191
2011 Ranger
(ran)
Owners Guide, 1st Printing
USA
(fus)
TILT STEERING WHEEL (IF EQUIPPED)
To adjust the steering wheel:
1. Pull and hold the steering wheel
release control toward you.
2. Move the steering wheel up or
down until you find the desired
location.
3. Release the steering wheel
release control. This will lock the
steering wheel in position.
WARNING:
Never adjust the steering wheel when the vehicle is
moving.
CENTER CONSOLE (IF EQUIPPED)
Your vehicle may be equipped with a
variety of console features. These
include:
Utility compartment with
cassette/compact disc storage
Cupholders
Flip-up armrest
WARNING:
Use only soft
cups in the cupholder. Hard
objects can injure you in a
collision.
AUXILIARY POWER POINT (12V DC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
The auxiliary power points are located on the instrument panel.
Driver Controls
50
2011 Ranger
(ran)
Owners Guide, 2nd Printing
USA
(fus)
Do not use the power point for operating the cigarette lighter element (if
equipped).
Note:
Do not plug optional electrical accessories into the cigarette
lighter socket (if equipped). Improper use of the lighter can cause
damage not covered by your warranty, and can result in fire or serious
injury.
To prevent the fuse from being blown, do not use the power point(s)
over the vehicle capacity of 12V DC/180W. If the power point or cigar
lighter socket is not working, a fuse may have blown. Refer to
Fuses and
relays
in the
Roadside Emergencies
chapter for fuse ratings and
information on checking and replacing fuses.
To have full capacity usage of your power point, the engine is required to
be running to avoid unintentional discharge of the battery. To prevent
the battery from being discharged:
do not use the power point longer than necessary when the engine is
not running,
do not leave battery chargers, video game adapters, computers and
other devices plugged in overnight or when the vehicle is parked for
extended periods.
Always keep the power point caps closed when not being used.
POWER WINDOWS (IF EQUIPPED)
WARNING:
Do not leave children unattended in the vehicle and
do not let children play with the power windows. They may
seriously injure themselves.
WARNING:
When closing the power windows, you should verify
they are free of obstructions and ensure that children and/or
pets are not in the proximity of the window openings.
Press and pull the window switches
to open and close windows.
Press down (to the first detent)
and hold the switch to open.
Pull up and hold the switch to
close.
Driver Controls
51
2011 Ranger
(ran)
Owners Guide, 2nd Printing
USA
(fus)
WARNING:
Do not attempt to service, repair, or modify the
Airbag Supplemental Restraint System or its fuses. Contact your
authorized dealer as soon as possible.
WARNING:
The front passenger airbag is not designed to offer
protection to an occupant in the center front seating position.
WARNING:
Modifying or adding equipment to the front end of
the vehicle (including frame, bumper, front end body structure
and tow hooks) may affect the performance of the airbag system,
increasing the risk of injury. Do not modify the front end of the
vehicle.
WARNING:
Additional equipment may affect the performance of
the airbag sensors increasing the risk of injury.
Children and airbags
For additional important safety information, read all information on
safety restraints in this guide.
WARNING:
Do not install a
child seat in a center facing
jump seat.
WARNING:
Airbags can kill or injure a child in a child seat.
NEVER
place a rear-facing child seat in front of an active airbag.
If you must use a forward-facing child seat in the front seat, move the
seat all the way back.
Seating and Safety Restraints
86
2011 Ranger
(ran)
Owners Guide, 2nd Printing
USA
(fus)
Determining if the system is operational
The SRS uses readiness lights in the instrument cluster or a tone to
indicate the condition of the system. Refer to
Airbag readiness
in the
Instrument Cluster
chapter. Routine maintenance of the airbag is not
required.
A difficulty with the system is indicated by one or more of the following:
The readiness lights will either
flash or stay lit.
The readiness lights will not
illuminate immediately after
ignition is turned on.
A series of five beeps will be heard. The tone pattern will repeat
periodically until the problem and/or light are repaired.
If any of these things happen, even intermittently, contact your
authorized dealer as soon as possible. Unless serviced, the system may
not function properly in the event of a collision.
Seat-mounted side airbag system
WARNING:
Do not place objects or mount equipment on or
near the airbag cover on the side of the seatbacks of the front
seats or in front seat areas that may come into contact with a
deploying airbag. Failure to follow these instructions may increase the
risk of personal injury in the event of a collision.
WARNING:
Do not use accessory seat covers. The use of
accessory seat covers may prevent the deployment of the side
airbags and increase the risk of injury in an accident.
WARNING:
Do not lean your head on the door. The side airbag
could injure you as it deploys from the side of the seatback.
WARNING:
Do not attempt to service, repair, or modify the
airbag SRS, its fuses or the seat cover on a seat containing an
airbag. See an authorized dealer.
Seating and Safety Restraints
92
2011 Ranger
(ran)
Owners Guide, 2nd Printing
USA
(fus)
PREPARING TO DRIVE
WARNING:
Utility vehicles have a significantly higher rollover
rate than other types of vehicles.
WARNING:
In a rollover crash, an unbelted person is
significantly more likely to die than a person wearing a seat belt.
Utility vehicles and trucks have larger tires and increased ground
clearance, giving the vehicle a higher center of gravity than a passenger
car.
WARNING:
Vehicles with a higher center of gravity such as
utility vehicles and trucks handle differently than vehicles with a
lower center of gravity. Utility vehicles and trucks are
not
designed for
cornering at speeds as high as passenger cars any more than low-slung
sports cars are designed to perform satisfactorily under off-road
conditions. Avoid sharp turns, excessive speed or abrupt maneuvers in
these vehicles. Failure to drive cautiously could result in an increased
risk of loss of vehicle control, vehicle rollover, personal injury and
death.
WARNING:
Loaded vehicles, with a higher center of gravity,
may handle differently than unloaded vehicles. Do not overload
your vehicle and use extra precautions, such as driving at slower
speeds, avoiding abrupt steering changes and allowing for increased
stopping distance, when driving a heavily loaded vehicle. Over-loading
or loading the vehicle improperly can deteriorate handling capability
and contribute to loss of vehicle control and vehicle rollover.
BRAKE-SHIFT INTERLOCK
The vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) unless the brake
pedal is pressed.
If you cannot move the gearshift lever out of P (Park) with the ignition
in the on position and the brake pedal pressed, it is possible that a fuse
has blown or the vehicle’s brake lamps are not operating properly. Refer
to
Fuses and relays
in the
Roadside Emergencies
chapter.
Driving
165
2011 Ranger
(ran)
Owners Guide, 2nd Printing
USA
(fus)
If the fuse is not blown and the brake lamps are working properly, the
following procedure will allow you to move the gearshift lever from P
(Park):
1. Apply the parking brake, and turn
the ignition to the on position.
2. Remove the lower trim panel
under the steering column. Make
sure not disturb the wires on the
electrical connector.
3. Locate the BSI solenoid
underneath the steering column.
4. With your hand, pull back on the
solenoid, and at the same time, shift
the transmission into N (Neutral).
5. Start the vehicle.
See your authorized dealer as
soon as possible if this
procedure is used.
WARNING:
Do not drive your vehicle until you verify that the
brakelamps are working.
WARNING:
Always set the parking brake fully and make sure
the gearshift is latched in P (Park). Turn the ignition to the lock
position and remove the key whenever you leave your vehicle.
WARNING:
If the parking brake is fully released, but the brake
warning lamp remains illuminated, the brakes may not be
working properly. See your authorized dealer.
Driving
166
2011 Ranger
(ran)
Owners Guide, 2nd Printing
USA
(fus)
FUEL PUMP SHUT-OFF SWITCH
This device stops the electric fuel pump from sending fuel to the engine
when your vehicle has had a substantial jolt.
After an accident, if the engine cranks but does not start, this switch
may have been activated.
The fuel pump shut-off switch is
located on the right side of the
passenger footwell, behind the fuse
panel door.
To reset the switch:
1. Turn the ignition off.
2. Check the fuel system for leaks.
3. If no leaks are apparent, reset the
switch by pressing the reset button.
4. Turn the ignition on.
5. Wait a few seconds and return
the key to off.
6. Make another check for leaks.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
15
Roadside Emergencies
183
2011 Ranger
(ran)
Owners Guide, 2nd Printing
USA
(fus)
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
Yellow
70A
Tan
Brown
80A
Natural
Black
Black
Passenger compartment fuse panel
The fuse panel is located under the
right-hand side of the instrument
panel, behind the kick panel. A fuse
puller tool is located near the lower
right corner of the fuse box; this
tool will assist you in pulling the
fuses out for inspection, if
necessary.
Roadside Emergencies
184
2011 Ranger
(ran)
Owners Guide, 2nd Printing
USA
(fus)
The fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
1
5A
Instrument panel dimmer switch
2
10A
Trailer tow park lamps
3
10A
Right low beam headlamp
4
10A
Left low beam headlamp
5
5A
Windshield wiper module
(run/accy)
6
10A
Radio (run/accy), Door switch
illumination
7
Not used
8
10A
Restraints control module (RCM),
Passenger airbag deactivation
indicator (PADI), Occupant
classification sensor (OCS)
15
25
2
1
3 4
5 6
8 9
11 12
7
10
13 14
17 18
20 21 22 23 24
16
19
27 28 29 30 31
26
32 33 34 35
Roadside Emergencies
185
2011 Ranger
(ran)
Owners Guide, 2nd Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
9
5A
Cluster air bag indicator
10
10A
Cluster (run/start), 4x4 module
(run/start)
11
10A
Passenger compartment fuse
panel (Logic power)
12
15A
Satellite radio
13
15A
Horn, Interior lamps
14
15A
High beam headlamp, High beam
indicator (cluster)
15
Not used
16
30A cartridge
fuse
Power windows
17
15A
Turn signals/hazards
18
Not used
19
20A
Center high-mounted stop lamp
(CHMSL)/Stop lamps
20
10A
Speed control module, Back-up
lamps, Overdrive cancel switch,
Electronic flasher (turn),
Anti-lock brake system (ABS)
(roll stability control)
21
5A
Starter relay coil
22
5A
Not used (spare)
23
30A
Headlamps (low and high beam)
24
20A
Radio battery feed (B+)
25
Accessory relay (power windows)
26
2A
Redundant cruise switch
27
10A
Climate control blower relay/blend
doors
28
15A
4x4 module battery feed (B+)
29
20A
Cigar lighter, Diagnostic connector
(OBD II)
Roadside Emergencies
186
2011 Ranger
(ran)
Owners Guide, 2nd Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
30
5A
Power mirrors
31
20A
Front park lamps, Rear park
lamps, License plate lamps,
Dimmer switch, Trailer tow park
lamps
32
5A
Brake switch (logic)
33
5A
Instrument cluster battery feed
(B+)
34
20A
Power point
35
15A
Power locks
Power distribution box
The power distribution box is
located in the engine compartment.
The power distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
from overloads.
WARNING:
Always disconnect the battery before servicing high
current fuses.
WARNING:
To reduce risk of electrical shock, always replace
the cover to the Power Distribution Box before reconnecting the
battery or refilling fluid reservoirs.
Roadside Emergencies
187
2011 Ranger
(ran)
Owners Guide, 2nd Printing
USA
(fus)
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and Specifications
chapter.
2.3L engine (if equipped)
The high-current fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
1
40A**
Passenger compartment fuse
panel
2
Not used
3
40A**
Passenger compartment fuse
panel
4
Not used
5
50A**
Passenger compartment fuse
panel
6
Not used
7
30A**
Starter solenoid
8
Not used
9
40A**
Ignition switch
10
Not used
Roadside Emergencies
188
2011 Ranger
(ran)
Owners Guide, 2nd Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
11
30A**
Powertrain control module (PCM)
relay
12
Not used
13
30A**
Blower motor (climate control)
14
Not used
15
Not used
16
Not used
17
40A**
Anti-lock brake system (ABS)
module
18
Not used
19
20A**
Engine fan
20
Not used
21
10A*
PCM keep alive power, Canister
purge valve solenoid
22
Not used
23
30A*
Fuel pump motor, Fuel injectors
24
Not used
25
10A*
A/C clutch solenoid
26
Not used
27
Not used
28
Not used
29
30A*
Wipers/washer
30
Not used
31
15A*
Fog lamps
32
Not used
33
30A*
Anti-lock brake system (ABS)
module
34
Not used
35
Not used
36
Not used
37
Not used
38
7.5A*
Trailer tow (right turn)
Roadside Emergencies
189
2011 Ranger
(ran)
Owners Guide, 2nd Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
39
15A*
PCM power
40
Not used
41
10A*
Automatic transmission
42
7.5A*
Trailer tow (left turn)
43
20A*
Engine fan relay coil, A/C relay
coil, IAC, Mass air flow sensor,
Heated exhaust gas oxygen
sensor, Catalyst module sensor,
Vapor management valve solenoid
44
15A*
Ignition coil, Capacitor
45A
Not used
45B
Not used
46A
Fuel pump relay, Fuel injectors
relay
46B
Not used
47
Engine fan relay
48
Starter relay
49
Not used
50
Not used
51
Not used
52
Not used
53
Not used
54
PCM relay
55
Blower relay
56A
A/C clutch solenoid relay
56B
Fog lamp relay
* Mini Fuses ** Maxi Fuses
Roadside Emergencies
190
2011 Ranger
(ran)
Owners Guide, 2nd Printing
USA
(fus)
4.0L engines (if equipped)
The high-current fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
1
40A**
Passenger compartment fuse
panel
2
Not used
3
40A**
Passenger compartment fuse
panel
4
Not used
5
50A**
Passenger compartment fuse
panel
6
Not used
7
30A**
Starter solenoid
8
Not used
9
40A**
Ignition switch
10
Not used
11
30A**
Powertrain control module (PCM)
relay
Roadside Emergencies
191
2011 Ranger
(ran)
Owners Guide, 2nd Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
12
Not used
13
30A**
Blower motor (climate control)
14
Not used
15
Not used
16
Not used
17
40A**
Anti-lock brake system (ABS)
module
18
Not used
19
Not used
20
Not used
21
10A*
PCM keep alive power, Canister
purge valve solenoid
22
Not used
23
30A*
Fuel pump motor, Fuel injectors
24
Not used
25
10A*
A/C clutch solenoid
26
Not used
27
20A*
4x4 module
28
Not used
29
30A*
Wipers/washer
30
Not used
31
15A*
Fog lamps
32
Not used
33
30A*
ABS module
34
Not used
35
Not used
36
Not used
37
Not used
38
7.5A*
Trailer tow (right turn)
39
15A*
PCM power
40
Not used
Roadside Emergencies
192
2011 Ranger
(ran)
Owners Guide, 2nd Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
41
10A*
Automatic transmission
42
7.5A*
Trailer tow (left turn)
43
20A*
A/C relay coil, IAC, Mass air flow
sensor, Heated exhaust gas
oxygen sensor, Catalyst module
sensor, Vapor management valve
solenoid, EGR solenoid, Heated
PCV
44
15A*
Ignition coil, Capacitor
45A
Not used
45B
Not used
46A
A/C clutch solenoid
46B
Not used
47
PCM relay
48A
Fuel pump relay, Fuel injectors
relay
48B
Fog lamp relay
51
Not used
52
Not used
53
Not used
54
Not used
55
Blower relay
56
Starter relay
* Mini Fuses ** Maxi Fuses
CHANGING THE TIRES
If you get a flat tire while driving, do not apply the brake heavily.
Instead, gradually decrease your speed. Hold the steering wheel firmly
and slowly move to a safe place on the side of the road.
Note:
The tire pressure monitoring system (TPMS) indicator light will
illuminate when the spare tire is in use. To restore the full functionality
of the monitoring system, all road wheels equipped with tire pressure
monitoring sensors must be mounted on the vehicle.
Roadside Emergencies
193
2011 Ranger
(ran)
Owners Guide, 2nd Printing
USA
(fus)
FUSE BOX LOCATIONS
Left-hand drive
B
A
E132740
Right-hand drive
B
A
E132741
Passenger compartment fuse
box
A
Engine compartment fuse box
B
Passenger compartment fuse box
Fully open the driver's side storage
compartment.
1
2
E133080
E134659
124
Fuses
Engine compartment fuse box
E133079
Release the catches and remove the cover.
CHANGING A FUSE
WARNINGS
Do not modify the electrical system
of your vehicle in any way. Have
repairs to the electrical system and
the replacement of relays and high current
fuses carried out by properly trained
technicians.
Switch the ignition and all electrical
equipment off before touching or
attempting to change a fuse.
CAUTION
Fit a replacement fuse with the same
rating as the one you have removed.
Note:
You can identify a blown fuse by a
break in the filament.
Note:
All fuses, except high current fuses,
are a push fit.
125
Fuses
FUSE SPECIFICATION CHART
Engine compartment fuse box
E133601
Circuits protected
Ampere
rating
Fuse
Passenger compartment fuse box supply (battery)
60
1
Passenger compartment fuse box supply (Ignition)
60
2
Engine cooling fan
50
3 (Petrol)
Glow plug control module
60
3 (Diesel)
ABS module
40
4
Electric windows (front and rear)
30
5
126
Fuses
Circuits protected
Ampere
rating
Fuse
Four wheel drive (4WD) motor ground
25
6
Not used
-
7
Not used
-
8
Electric seat
20
9
Electric windows (front)
30
10
Blower motor
30
11
Four wheel drive (4WD) motor power
25
12
Starter solenoid
20
13
Heated rear window
20
14
Flex-fuel pump
10
15 (Petrol)
Vapouriser glow plug
15
15 (Diesel)
A/C Clutch
10
16
Electric windows (front)
25
17
Windscreen wiper motor
20
18
Windscreen wiper motor ground
20
19
Cigar lighter
20
20
Horn
15
21
Fuel injectors or flex-fuel valve
15
22
Differential lock solenoid
10
23
Auxillary power socket
20
24
Ignition coils, Temperature and Mass Air Flow sensor, Glow
plug module, Vacuum Control Valve (VCV), Electronic
Vacuum Regulator Valve (EVRV)
15
25
Electronic control module (ECM)
7.5
26
Transmission control module (TCM)
10
27
Heated exhaust gas oxygen, Universal Heated Exhaust
Gas Oxygen-sensor, Relay coils, Fuel cut off switch
10
28
127
Fuses
Circuits protected
Ampere
rating
Fuse
Electronic control module (ECM)
15
29
Battery monitoring sensor
15
30
Auxillary power socket (rear console)
20
31
A/C pressure switch
5
32
Transmission control module (TCM)
10
33
Not used
-
34
Passenger compartment fuse box supply (Ignition)
20
35
ABS module
5
36
Headlamp levelling
10
37
Heated seat
20
38
Power mirrors
10
39
Vapouriser pump
10
40
Heated mirrors
10
41
Alarm horn
10
42
Heated windscreen (right)
30
43
Heated windscreen (left)
30
44
ABS module
25
45
Auxillary power socket (bedliner)
20
46
Trailer tow module
40
47
Not used
-
48
Not used
-
49
Ignition relay, Relay coils
5
50
Electric windows (rear)
30
51 (Brazil
only)
Trailer tow (12 or 13 pin battery feed, Permanent live)
20
51
128
Fuses
Circuits switched
Relay
Key interlock
R1
Wiper on or off
R2
Horn
R3
A/C clutch
R4
Differential lock
R5
Wiper Hi or Lo
R6
Engine cooling fan low
R7
Engine cooling fan high
R8
Flex-fuel pump, Vapouriser glow plug
R9
Heated rear window
R10
Heated windscreen
R11
Not used
R12
Electronic control module (ECM) power
hold
R13
Ignition
R14
4WD motor 2 (Clockwise)
R15
4WD motor 1 (Counter clockwise)
R16
4WD motor
R17
Security horn
R18
Starter motor
R19
Not used
R20
Not used
R21
Not used
R22
Not used
R23
Not used
R24
Not used
R25
Blower motor
R26
129
Fuses
Circuits switched
Relay
Electric seat
R27
130
Fuses
Passenger compartment fuse box
E133602
131
Fuses
Circuits protected
Ampere rating
Fuse
Fuel pump
20
56
Not used
-
57
Not used
-
58
Passive anti-theft system
(PATS)
5
59
Interior lamp, driver's door
switch pack, mood lights,
puddle lights, Automatic
shifter, footwell lamp
10
60
Not used
-
61
Rain sensor module
5
62
Tachograph
5
63
Not used
-
64
Not used
-
65
Driver's door lock, central
double locking
20
66
Stop lamp switch
5
67
Not used
-
68
Instrument cluster, Integ-
rated control module (ICP),
Tracking and blocking
module
5
69
Central locking
20
70
Air conditioning
5
71
Alarm horn
7.5
72
On-board diagnostics II
5
73
Main beam
20
74
Front fog lamps
15
75
Reversing lamp, rear view
mirror
10
76
132
Fuses
Circuits protected
Ampere rating
Fuse
Washer pump
20
77
Ignition switch
5
78
Radio
15
79
Multi-function display, Hi
audio, Brake Valve Closing
(BVC) module
20
80
Interior motion sensor
5
81
Washer pump ground
20
82
Central locking ground
20
83
Driver's door lock, central
double locking ground
20
84
Instrument cluster, Parking
aid module, Rear view
camera, Manual air condi-
tioning, Rear view mirror
7.5
85
Restraint system, Passenger
air-bag deactivation switch
10
86
Tachograph
5
87
Not used
-
88
Not used
-
89
133
Fuses
LHD
H
G
F
A
E
B
C
D
I
J
E131920
Engine coolant reservoir cap. See
Engine Coolant Check
(page 144).
A
Brake and clutch fluid reservoir cap. See
Brake and Clutch Fluid Check
(page
145).
B
Engine oil filler cap
1
. See
Engine Oil Check
(page 143).
C
Engine oil dipstick
1
. See
Engine Oil Check
(page 143).
D
Engine junction box. See
Fuses
(page 124).
E
Vehicle Identificaton Plate. See
Vehicle identification
(page 162).
F
Battery. See
Vehicle battery
(page 152).
G
Power steering fluid reservoir cap. See
Power Steering Fluid Check
(page
145).
H
Air Cleaner.
I
Washer fluid reservoir cap. See
Washer Fluid Check
(page 146).
J
1
The filler caps and the engine oil dipstick are coloured for easy identification.
138
Maintenance
LHD
H
F
G
A
E
B
C
D
K
I
J
E131931
Engine coolant reservoir cap. See
Engine Coolant Check
(page 144).
A
Brake and clutch fluid reservoir cap. See
Brake and Clutch Fluid Check
(page
145).
B
Engine oil dipstick
1
. See
Engine Oil Dipstick
(page 143).
C
Engine oil filler cap
1
. See
Engine Oil Check
(page 143).
D
Fuel filter water trap. See
Draining the Fuel Filter Water Trap
(page 145).
E
Engine junction box. See
Fuses
(page 124).
F
Vehicle Identificaton Plate. See
Vehicle identification
(page 162).
G
Battery. See
Vehicle battery
(page 152).
H
Power steering fluid reservoir cap. See
Power Steering Fluid Check
(page
145).
I
140
Maintenance
LHD
H
F
G
A
E
B
C
D
K
I
J
E131968
Engine coolant reservoir cap. See
Engine Coolant Check
(page 144).
A
Brake and clutch fluid reservoir cap. See
Brake and Clutch Fluid Check
(page
145).
B
Engine oil dipstick
1
. See
Engine Oil Dipstick
(page 143).
C
Engine oil filler cap
1
. See
Engine Oil Check
(page 143).
D
Fuel filter water trap. See
Draining the Fuel Filter Water Trap
(page 145).
E
Engine junction box. See
Fuses
(page 124).
F
Vehicle Identificaton Plate. See
Vehicle identification
(page 162).
G
Battery. See
Vehicle battery
(page 152).
H
Power steering fluid reservoir cap. See
Power Steering Fluid Check
(page
145).
I
142
Maintenance
Example
current set time between 12:01 and
12:29 will change to 12:00 exactly
current set time between 12:30 and
12:59 will change to 1:00 exactly.
Note:
If the power supply to the unit is
interrupted (if the fuse blows or the vehicle's
battery is disconnected), the clock will need
to be reset.
194
Audio unit clock and date displays