Ford Ranger - 2008 Fuse Box Diagram

Ford Ranger - 2008 Fuse Box Diagram

TILT STEERING WHEEL (IF EQUIPPED)
To adjust the steering wheel:
1. Pull and hold the steering wheel
release control toward you.
2. Move the steering wheel up or
down until you find the desired
location.
3. Release the steering wheel
release control. This will lock the
steering wheel in position.
Never adjust the steering wheel when the vehicle is moving.
CENTER CONSOLE (IF EQUIPPED)
Your vehicle may be equipped with a
variety of console features. These
include:
Utility compartment with
cassette/compact disc storage
Cupholders
Flip up armrest
Use only soft cups in the
cupholder. Hard objects can
injure you in a collision.
AUXILIARY POWER POINT (12VDC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
54
The auxiliary power points are
located on the instrument panel.
Do not use the power point for
operating the cigarette lighter
element (if equipped).
To prevent the fuse from being
blown, do not use the power
point(s) over the vehicle capacity of
12 VDC/180W. If the power point or cigar lighter socket is not working, a
fuse may have blown. Refer to
Passenger Compartment Fuse Panel
and
Fuses and relays
in the
Roadside Emergencies
chapter for fuse
ratings and information on checking and replacing fuses.
To prevent the battery from being discharged, do not use the power
point longer than necessary when the engine is not running.
Always keep the power point caps closed when not being used.
Cigar/Cigarette lighter (if equipped)
Do not plug optional electrical accessories into the cigarette lighter
socket.
Do not hold the lighter in with your hand while it is heating, this will
damage the lighter element and socket. The lighter will be released from
its heating position when it is ready to be used.
Improper use of the lighter can cause damage not covered by your
warranty.
POWER WINDOWS (IF EQUIPPED)
Do not leave children unattended in the vehicle and do not let
children play with the power windows. They may seriously injure
themselves.
When closing the power windows, you should verify they are free
of obstructions and ensure that children and/or pets are not in
the proximity of the window openings.
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
55
Rear facing child seats
should NEVER be placed in
front of an active airbag.
All occupants of the vehicle,
including the driver, should
always properly wear their safety
belts, even when an air bag
supplemental restraint system
(SRS) is provided.
National Highway Traffic Safety Administration (NHTSA)
recommends a minimum distance of at least 25 cm (10 inches)
between an occupant’s chest and the driver air bag module.
Never place your arm over the air bag module as a deploying air
bag can result in serious arm fractures or other injuries.
Steps you can take to properly position yourself away from the airbag:
Move your seat to the rear as far as you can while still reaching the
pedals comfortably.
Recline the seat slightly (one or two degrees) from the upright
position.
Do not put anything on or over the airbag module. Placing
objects on or over the airbag inflation area may cause those
objects to be propelled by the airbag into your face and torso causing
serious injury.
Do not attempt to service, repair, or modify the Airbag
Supplemental Restraint System or its fuses. See your authorized
dealer.
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
87
If you cannot move the gearshift lever out of P (Park) with ignition in
the ON position and the brake pedal depressed:
1. Apply the parking brake, turn ignition key to LOCK, then remove the
key.
2. Insert the key and turn it to OFF.
Apply the brake pedal and shift
to N (Neutral)
.
When the key is in the ignition and in the OFF position, the
automatic transmission shift lever can be moved from the P
(Park) position without the brake pedal depressed. To avoid unwanted
vehicle movement, always set the parking brake.
Note:
On some vehicles, when the key is in the OFF position, the
brake-shift interlock feature will prevent the automatic transmission shift
lever from being moved out of the P (Park) position without the brake
pedal being depressed.
3. Start the vehicle.
If it is necessary to use the above procedure to move the gearshift lever,
it is possible that a fuse has blown or the vehicle’s brakelamps are not
operating properly. Refer to
Fuses and relays
in the
Roadside
Emergencies
chapter.
Do not drive your vehicle until you verify that the brakelamps
are working.
Always set the parking brake fully and make sure the gearshift is
latched in P (Park). Turn the ignition to the LOCK position and
remove the key whenever you leave your vehicle.
If the parking brake is fully released, but the brake warning lamp
remains illuminated, the brakes may not be working properly.
See your authorized dealer.
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Driving
156
The fuel pump shut-off switch is
located on the right side of the
passenger footwell, behind the fuse
panel door.
To reset the switch:
1. Turn the ignition OFF.
2. Check the fuel system for leaks.
3. If no leaks are apparent, reset the
switch by pushing in on the reset
button.
4. Turn the ignition ON.
5. Wait a few seconds and return
the key to OFF.
6. Make another check for leaks.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
15
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
173
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
Yellow
70A
Tan
Brown
80A
Natural
Black
Black
Passenger compartment fuse panel
The fuse panel is located under the
right-hand side of the instrument
panel behind the kick panel. A fuse
puller tool is located near the lower
right corner of the fuse box; this
tool will assist you in pulling the
fuses out for inspection, if
necessary.
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
174
The fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
1
5A
Instrument panel dimmer switch
2
10A
Trailer tow park lamps
3
10A
Right low beam headlamp
4
10A
Left low beam headlamp
5
5A
Windshield wiper module
(RUN/ACCY)
6
10A
Radio (RUN/ACCY), Door switch
illumination
7
5A
Not used (spare)
8
10A
Restraints Control Module (RCM),
PADI (Passenger Air bag
Deactivation Indicator), Occupant
classification sensor (OCS)
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
175
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
9
5A
Cluster air bag indicator
10
10A
Cluster (RUN/START), 4x4
module (RUN/START)
11
10A
Smart Junction Box (SJB) (Logic
power)
12
15A
Audiophile subwoofer amplifier,
Satellite radio
13
15A
Horn, Interior lamps
14
15A
High beam headlamp, High beam
indicator (cluster)
15
Not used
16
30A cartridge
fuse
Power windows
17
15A
Turn signals/Hazards
18
Not used
19
20A
Center High-Mounted Stop Lamp
(CHMSL)/Stop lamps
20
10A
Anti-lock Brake System (ABS)
module, Speed control module,
Back-up lamps, Overdrive cancel
switch, Electronic flasher
(turn/hazard)
21
5A
Starter relay coil
22
5A
Radio (START)
23
30A
Headlamps (low and high beam)
24
20A
Radio battery feed (B+)
25
Accessory relay (power windows)
26
2A
Redundant cruise switch
27
10A
Climate control blower relay/blend
doors
28
15A
4x4 module battery feed (B+)
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
176
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
29
20A
Cigar lighter, Diagnostic connector
(OBD II)
30
5A
Power mirrors
31
20A
Front park lamps, Rear park
lamps, License plate lamps,
Dimmer switch, Trailer tow park
lamps
32
5A
Brake switch (logic), Brake-shift
interlock
33
5A
Instrument cluster battery feed
(B+)
34
20A
Power point
35
15A
Power locks
Power distribution box
The power distribution box is
located in the engine compartment.
The power distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
from overloads.
Always disconnect the battery before servicing high current
fuses.
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
177
To reduce risk of electrical shock, always replace the cover to
the Power Distribution Box before reconnecting the battery or
refilling fluid reservoirs.
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and Specifications
chapter.
2.3L engine (if equipped)
The high-current fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
1
40A**
Interior fuse panel (SJB)
2
Not used
3
40A**
Interior fuse panel (SJB)
4
Not used
5
50A**
Interior fuse panel (SJB)
6
Not used
7
30A**
Starter solenoid
8
Not used
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
178
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
9
40A**
Ignition switch
10
Not used
11
30A**
Powertrain Control Module (PCM)
relay
12
Not used
13
30A**
Blower motor (climate control)
14
Not used
15
Not used
16
Not used
17
40A**
Anti-lock Brake System (ABS)
module
18
Not used
19
20A**
Engine fan
20
Not used
21
10A*
PCM keep alive power, Canister
purge valve solenoid
22
Not used
23
30A*
Fuel pump motor, Fuel injectors
24
Not used
25
10A*
A/C clutch solenoid
26
Not used
27
Not used
28
Not used
29
30A*
Wipers/washer
30
Not used
31
15A*
Fog lamps
32
Not used
33
30A*
Anti-lock Brake System (ABS)
module
34
Not used
35
Not used
36
Not used
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
179
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
37
Not used
38
7.5A*
Trailer tow (right turn)
39
15A*
PCM power
40
Not used
41
10A*
Automatic transmission
42
7.5A*
Trailer tow (left turn)
43
20A*
Engine fan relay coil, A/C relay
coil, IAC, MAFS, HEGO, CMS,
VMV solenoid
44
15A*
Ignition coil, Capacitor
45A
Not used
45B
Not used
46A
Fuel pump relay, Fuel injectors
relay
46B
Not used
47
Engine fan relay
48
Starter relay
49
Not used
50
Not used
51
Not used
52
Not used
53
Not used
54
PCM relay
55
Blower relay
56A
A/C clutch solenoid relay
56B
Fog lamp relay
* Mini Fuses ** Maxi Fuses
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
180
3.0L and 4.0L engines (if equipped)
The high-current fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
1
40A**
Interior fuse panel (SJB)
2
Not used
3
40A**
Interior fuse panel (SJB)
4
Not used
5
50A**
Interior fuse panel (SJB)
6
Not used
7
30A**
Starter solenoid
8
Not used
9
40A**
Ignition switch
10
Not used
11
30A**
Powertrain Control Module (PCM)
relay
12
Not used
13
30A**
Blower motor (climate control)
14
Not used
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
181
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
15
Not used
16
Not used
17
40A**
Anti-lock Brake System (ABS)
module
18
Not used
19
Not used
20
Not used
21
10A*
PCM keep alive power, Canister
purge valve solenoid
22
Not used
23
30A*
Fuel pump motor, Fuel injectors
24
Not used
25
10A*
A/C clutch solenoid
26
Not used
27
20A*
4x4 module
28
Not used
29
30A*
Wipers/washer
30
Not used
31
15A*
Foglamps
32
Not used
33
30A*
Anti-lock Brake System (ABS)
module
34
Not used
35
Not used
36
Not used
37
Not used
38
7.5A*
Trailer tow (right turn)
39
15A*
PCM power
40
Not used
41
10A*
Automatic transmission
42
7.5A*
Trailer tow (left turn)
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
182
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
43
20A*
A/C relay coil, IAC, MAFS, HEGO,
CMS, VMV solenoid, EGR
solenoid, Heated PCV
44
15A*
Ignition coil, Capacitor
45A
Not used
45B
Not used
46A
A/C clutch solenoid
46B
Not used
47
PCM relay
48A
Fuel pump relay, Fuel injectors
relay
48B
Fog lamp relay
51
Not used
52
Not used
53
Not used
54
Not used
55
Blower relay
56
Starter relay
* Mini Fuses ** Maxi Fuses
CHANGING THE TIRES
If you get a flat tire while driving:
do not brake heavily.
gradually decrease the vehicle’s speed.
hold the steering wheel firmly.
slowly move to a safe place on the side of the road.
Note:
The tire pressure monitoring system (TPMS) indicator light will
illuminate when the spare is in use. To restore the full functionality of
the monitoring system, all road wheels equipped with tire pressure
monitoring sensors must be mounted on the vehicle.
Have a flat serviced by an authorized dealer in order to prevent damage
to the TPMS sensor, refer to
Changing tires with TPMS
in the
Tires,
Wheels and Loading
chapter. Replace the spare tire with a road tire as
soon as possible.
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
183
TILT STEERING WHEEL (IF EQUIPPED)
To adjust the steering wheel:
1. Pull and hold the steering wheel
release control toward you.
2. Move the steering wheel up or
down until you find the desired
location.
3. Release the steering wheel
release control. This will lock the
steering wheel in position.
Never adjust the steering wheel when the vehicle is moving.
CENTER CONSOLE (IF EQUIPPED)
Your vehicle may be equipped with a
variety of console features. These
include:
Utility compartment with
cassette/compact disc storage
Cupholders
Flip up armrest
Use only soft cups in the
cupholder. Hard objects can
injure you in a collision.
AUXILIARY POWER POINT (12VDC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
54
The auxiliary power points are
located on the instrument panel.
Do not use the power point for
operating the cigarette lighter
element (if equipped).
To prevent the fuse from being
blown, do not use the power
point(s) over the vehicle capacity of
12 VDC/180W. If the power point or cigar lighter socket is not working, a
fuse may have blown. Refer to
Passenger Compartment Fuse Panel
and
Fuses and relays
in the
Roadside Emergencies
chapter for fuse
ratings and information on checking and replacing fuses.
To have full capacity usage of your power point, the engine is required to
be running to avoid unintentional discharge of the battery. To prevent
the battery from being discharged:
do not use the power point longer than necessary when the engine is
not running,
do not leave battery chargers, video game adapters, computers and
other devices plugged in overnight or when the vehicle is parked for
extended periods.
Always keep the power point caps closed when not being used.
Cigar/Cigarette lighter (if equipped)
Do not plug optional electrical accessories into the cigarette lighter
socket.
Do not hold the lighter in with your hand while it is heating, this will
damage the lighter element and socket. The lighter will be released from
its heating position when it is ready to be used.
Improper use of the lighter can cause damage not covered by your
warranty.
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
55
Rear facing child seats
should NEVER be placed in
front of an active airbag.
All occupants of the vehicle,
including the driver, should
always properly wear their safety
belts, even when an air bag
supplemental restraint system
(SRS) is provided.
National Highway Traffic Safety Administration (NHTSA)
recommends a minimum distance of at least 25 cm (10 inches)
between an occupant’s chest and the driver air bag module.
Never place your arm over the air bag module as a deploying air
bag can result in serious arm fractures or other injuries.
Steps you can take to properly position yourself away from the airbag:
Move your seat to the rear as far as you can while still reaching the
pedals comfortably.
Recline the seat slightly (one or two degrees) from the upright
position.
Do not put anything on or over the airbag module. Placing
objects on or over the airbag inflation area may cause those
objects to be propelled by the airbag into your face and torso causing
serious injury.
Do not attempt to service, repair, or modify the Airbag
Supplemental Restraint System or its fuses. See your authorized
dealer.
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
88
The fuel pump shut-off switch is
located on the right side of the
passenger footwell, behind the fuse
panel door.
To reset the switch:
1. Turn the ignition OFF.
2. Check the fuel system for leaks.
3. If no leaks are apparent, reset the
switch by pushing in on the reset
button.
4. Turn the ignition ON.
5. Wait a few seconds and return
the key to OFF.
6. Make another check for leaks.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
15
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
174
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
Yellow
70A
Tan
Brown
80A
Natural
Black
Black
Passenger compartment fuse panel
The fuse panel is located under the
right-hand side of the instrument
panel behind the kick panel. A fuse
puller tool is located near the lower
right corner of the fuse box; this
tool will assist you in pulling the
fuses out for inspection, if
necessary.
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
175
The fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
1
5A
Instrument panel dimmer switch
2
10A
Trailer tow park lamps
3
10A
Right low beam headlamp
4
10A
Left low beam headlamp
5
5A
Windshield wiper module
(RUN/ACCY)
6
10A
Radio (RUN/ACCY), Door switch
illumination
7
Not used
8
10A
Restraints Control Module (RCM),
PADI (Passenger Air bag
Deactivation Indicator), Occupant
classification sensor (OCS)
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
176
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
9
5A
Cluster air bag indicator
10
10A
Cluster (RUN/START), 4x4
module (RUN/START)
11
10A
Smart Junction Box (SJB) (Logic
power)
12
15A
Audiophile subwoofer amplifier,
Satellite radio
13
15A
Horn, Interior lamps
14
15A
High beam headlamp, High beam
indicator (cluster)
15
Not used
16
30A cartridge
fuse
Power windows
17
15A
Turn signals/Hazards
18
Not used
19
20A
Center High-Mounted Stop Lamp
(CHMSL)/Stop lamps
20
10A
Anti-lock Brake System (ABS)
module, Speed control module,
Back-up lamps, Overdrive cancel
switch, Electronic flasher
(turn/hazard)
21
5A
Starter relay coil
22
5A
Radio (START)
23
30A
Headlamps (low and high beam)
24
20A
Radio battery feed (B+)
25
Accessory relay (power windows)
26
2A
Redundant cruise switch
27
10A
Climate control blower relay/blend
doors
28
15A
4x4 module battery feed (B+)
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
177
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
29
20A
Cigar lighter, Diagnostic connector
(OBD II)
30
5A
Power mirrors
31
20A
Front park lamps, Rear park
lamps, License plate lamps,
Dimmer switch, Trailer tow park
lamps
32
5A
Brake switch (logic), Brake-shift
interlock
33
5A
Instrument cluster battery feed
(B+)
34
20A
Power point
35
15A
Power locks
Power distribution box
The power distribution box is
located in the engine compartment.
The power distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
from overloads.
Always disconnect the battery before servicing high current
fuses.
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
178
To reduce risk of electrical shock, always replace the cover to
the Power Distribution Box before reconnecting the battery or
refilling fluid reservoirs.
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and Specifications
chapter.
2.3L engine (if equipped)
The high-current fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
1
40A**
Interior fuse panel (SJB)
2
Not used
3
40A**
Interior fuse panel (SJB)
4
Not used
5
50A**
Interior fuse panel (SJB)
6
Not used
7
30A**
Starter solenoid
8
Not used
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
179
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
9
40A**
Ignition switch
10
Not used
11
30A**
Powertrain Control Module (PCM)
relay
12
Not used
13
30A**
Blower motor (climate control)
14
Not used
15
Not used
16
Not used
17
40A**
Anti-lock Brake System (ABS)
module
18
Not used
19
20A**
Engine fan
20
Not used
21
10A*
PCM keep alive power, Canister
purge valve solenoid
22
Not used
23
30A*
Fuel pump motor, Fuel injectors
24
Not used
25
10A*
A/C clutch solenoid
26
Not used
27
Not used
28
Not used
29
30A*
Wipers/washer
30
Not used
31
15A*
Fog lamps
32
Not used
33
30A*
Anti-lock Brake System (ABS)
module
34
Not used
35
Not used
36
Not used
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
180
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
37
Not used
38
7.5A*
Trailer tow (right turn)
39
15A*
PCM power
40
Not used
41
10A*
Automatic transmission
42
7.5A*
Trailer tow (left turn)
43
20A*
Engine fan relay coil, A/C relay
coil, IAC, MAFS, HEGO, CMS,
VMV solenoid
44
15A*
Ignition coil, Capacitor
45A
Not used
45B
Not used
46A
Fuel pump relay, Fuel injectors
relay
46B
Not used
47
Engine fan relay
48
Starter relay
49
Not used
50
Not used
51
Not used
52
Not used
53
Not used
54
PCM relay
55
Blower relay
56A
A/C clutch solenoid relay
56B
Fog lamp relay
* Mini Fuses ** Maxi Fuses
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
181
3.0L and 4.0L engines (if equipped)
The high-current fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
1
40A**
Interior fuse panel (SJB)
2
Not used
3
40A**
Interior fuse panel (SJB)
4
Not used
5
50A**
Interior fuse panel (SJB)
6
Not used
7
30A**
Starter solenoid
8
Not used
9
40A**
Ignition switch
10
Not used
11
30A**
Powertrain Control Module (PCM)
relay
12
Not used
13
30A**
Blower motor (climate control)
14
Not used
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
182
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
15
Not used
16
Not used
17
40A**
Anti-lock Brake System (ABS)
module
18
Not used
19
Not used
20
Not used
21
10A*
PCM keep alive power, Canister
purge valve solenoid
22
Not used
23
30A*
Fuel pump motor, Fuel injectors
24
Not used
25
10A*
A/C clutch solenoid
26
Not used
27
20A*
4x4 module
28
Not used
29
30A*
Wipers/washer
30
Not used
31
15A*
Foglamps
32
Not used
33
30A*
Anti-lock Brake System (ABS)
module
34
Not used
35
Not used
36
Not used
37
Not used
38
7.5A*
Trailer tow (right turn)
39
15A*
PCM power
40
Not used
41
10A*
Automatic transmission
42
7.5A*
Trailer tow (left turn)
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
183
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
43
20A*
A/C relay coil, IAC, MAFS, HEGO,
CMS, VMV solenoid, EGR
solenoid, Heated PCV
44
15A*
Ignition coil, Capacitor
45A
Not used
45B
Not used
46A
A/C clutch solenoid
46B
Not used
47
PCM relay
48A
Fuel pump relay, Fuel injectors
relay
48B
Fog lamp relay
51
Not used
52
Not used
53
Not used
54
Not used
55
Blower relay
56
Starter relay
* Mini Fuses ** Maxi Fuses
CHANGING THE TIRES
If you get a flat tire while driving:
do not brake heavily.
gradually decrease the vehicle’s speed.
hold the steering wheel firmly.
slowly move to a safe place on the side of the road.
Note:
The tire pressure monitoring system (TPMS) indicator light will
illuminate when the spare is in use. To restore the full functionality of
the monitoring system, all road wheels equipped with tire pressure
monitoring sensors must be mounted on the vehicle.
Have a flat serviced by an authorized dealer in order to prevent damage
to the TPMS sensor, refer to
Changing tires with TPMS
in the
Tires,
Wheels and Loading
chapter. Replace the spare tire with a road tire as
soon as possible.
2008 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
184
FUSE BOX LOCATIONS
Left-hand drive
E78923
Right-hand drive
E78927
Auxiliary fuse box
A
Central fuse box
B
Auxiliary fuse box
E78924
85
Fuses
Release the catches and remove the
cover.
Central fuse box
E78925
Remove the trim cover.
Inclinometerandcompassfuse
Fully open the glove compartment.
E83734
WARNING
Make sure that you keep a firm grip
of the glove compartment to
prevent it dropping out of the
instrument panel.
Press the sides of the glove compartment
towards the centre to release the glove
compartment stops.
CHANGING A FUSE
WARNINGS
Do not modify the electrical system
of your vehicle in any way. Have
repairs to the electrical system and
the replacement of relays and high current
fuses carried out by properly trained
technicians.
Switch the ignition and all electrical
equipment off before touching or
attempting to change a fuse.
CAUTION
Fit a replacement fuse with the same
rating as the one you have removed.
Note:
You can identify a blown fuse by
a break in the filament.
Note:
All fuses, except high current
fuses, are a push fit.
86
Fuses
FUSE SPECIFICATION CHART
Central fuse box
1
2
3
4
5
6
7
8
9
10
11
12
20
19
18
17
16
15
14
13
21
22
E78926
Circuits protected
Colour
Ampere
rating
Fuse
Cigar lighter, audio, electric exterior
mirrors, auxiliary power socket
yellow
20
1
Heated seat
blue
15
2
Windscreen wipers and washers
blue
15
3
Air conditioning, ABS relay
red
10
4
Central locking
pink
30
5
Electric windows
pink
30
6
ABS solenoid
yellow
20
7
Brake lights, horn
blue
15
8
Hazard warning flashers
red
10
9
87
Fuses
Circuits protected
Colour
Ampere
rating
Fuse
Instrument cluster, reversing lamps,
direction indicators, remote free-wheel
(RFW) system
blue
15
10
Engine management systems
blue
15
11
Not used
-
-
12
Air conditioning magnetic clutch
red
10
13
Heated rear window
yellow
20
14
Rear fog lamp
red
10
15
Right-hand headlamp
blue
15
16
Left-hand headlamp
blue
15
17
Front fog lamp
blue
15
18
Rear lamps, side lamps, number plate
lamp
red
10
19
Interior lamps, warning system
blue
15
20
Not used
-
-
21
Electric windows
pink
30
22
88
Fuses
Auxiliary fuse box
E83464
Circuits protected
Colour
Ampere
rating
Fuse
For protection of all circuits
-
80
1
Glow plug
-
60
2
Engine management systems, instrument
cluster, cigar lighter
1
, electric windows
1
-
40
3
Headlamps
-
60
4
Injectors, fuel injection system
-
20
5
ABS motor, hazard warning lamps, brake
lamps
-
40
6
Fuel warmer
-
30
7
Air conditioning, windscreen washers and
wipers
-
60
8
Air conditioning, heated rear window
1
or
central locking
1
or ABS solenoid
1
or electric
windows
1
or tail lamps or fog lamps
1
-
60
9
1
Some variants
89
Fuses
Inclinometerandcompassfuse
E83729
1
Circuits protected
Colour
Ampere
rating
Fuse
For protection of all inclinometer and
compass circuits
-
2
1
90
Fuses
ENGINE COMPARTMENT OVERVIEW - 2.5L DURATORQ-
TDCI (WL) DIESEL/3.0L DURATORQ-TDCI (WL) DIESEL
E78937
A
B
C
D
J
L
K
M
I
H
E
F
G
Auxiliary fuse box. See
Changing a fuse
(page 86).
A
Power steering fluid reservoir. See
Power steering fluid check
(page
97).
B
Fuel filter. See
Draining the fuel filter water trap
(page 98).
C
Brake and clutch fluid reservoir (right-hand drive). See
Brake and clutch
fluid check
(page 98).
D
Vehicle identification plate. See
Vehicle identification plate
(page 112).
E
Brake and clutch fluid reservoir (left-hand drive). See
Brake and clutch
fluid check
(page 98).
F
Air cleaner.
G
Engine coolant reservoir. See
Engine coolant check
(page 97).
H
Coolant system cap. See
Engine coolant check
(page 97).
I
Engine oil dipstick. See
Engine oil check
(page 96).
J
Engine oil filler cap. See
Engine oil check
(page 96).
K
95
Maintenance
SETTING THE CLOCK ON
THE AUDIO UNIT
Changing the time
The clock can be set at any time when
the ignition switch is in the ACC or ON
position.
Press the CLOCK button for about
two seconds until a beep is heard. The
clock's current time will flash.
To advance the hours, press the
HOUR SET button. To advance the
minutes, press the MINUTE SET
button while the time is flashing.
Press the CLOCK button to confirm
and set.
12/24 hour format
To switch between a 12 and 24 hour clock
display, press the display switch buttons
(AF, AUTO MEMORY) while the time is
flashing.
Exact hour adjustment
You can set the time to the beginning of
an hour using this feature.
Press the CLOCK button for about
two seconds until a beep is heard. The
clock's current time will flash.
Press the CLOCK button again and
the time will be adjusted as follows:
Example
current set time between 12:01 and
12:29 will change to 12:00 exactly
current set time between 12:30 and
12:59 will change to 1:00 exactly.
Note:
If the power supply to the unit is
interrupted (if the fuse blows or the
vehicle's battery is disconnected), the
clock will need to be reset.
129
Audio unit clock and date displays