Ford Mark LT - 2008 Fuse Box Diagram

Ford Mark LT - 2008 Fuse Box Diagram

While pushing upwards with palms, grip the side latches with fingers and
squeeze.
With pressure applied with palms and side latches squeezed down, pull
downward on the entire storage bin and remove.
AUXILIARY POWER POINT (12VDC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
86
The auxiliary power point is located
on the instrument panel.
Do not use the power point for
operating the cigarette lighter
element (if equipped).
To prevent the fuse from being
blown, do not use the power
point(s) over the vehicle capacity of
12 VDC/180W. If the power point or
cigar lighter socket is not working, a
fuse may have blown. Refer to
Fuses and relays
in the
Roadside
Emergencies
chapter for information on checking and replacing fuses.
To have full capacity usage of your power point, the engine is required to
be running (in a safe manner) to avoid unintentional discharge of the
battery. To prevent the battery from being discharged:
do not use the power point longer than necessary when the engine is
not running,
do not leave battery chargers, video game adapters, computers and
other devices plugged in overnight or when the vehicle is parked for
extended periods.
An additional auxiliary power point
is located on the lower rear side of
the center console. The power point
is accessible from the rear seats.
Always keep the power point caps
closed when not being used.
Cigarette/Cigar lighter (if equipped)
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
87
Always transport children 12 years old and under in the back
seat if your vehicle has a back seat. Rear facing infant seats
should NEVER be placed in the front seats. This is because the back of
the infant seat is too close to the inflating airbag and the risk of a fatal
injury to the infant when the airbag inflates is substantial.
The National Highway Traffic Safety Administration (NHTSA)
recommends a minimum distance of at least 10 inches (25 cm)
between an occupant’s chest and the driver airbag cover.
Never place your arms or feet over the airbag module as a
deploying airbag can result in serious fractures or other injuries.
To properly position yourself away from the airbag:
Move your seat to the rear as far as you can while still reaching the
pedals comfortably.
Recline the seat slightly one or two degrees from the upright position.
Do not put anything on or
over the airbag cover (1).
Placing objects on or over the
airbag cover may cause those
objects to be thrown by the airbag
into your face and torso or may
result in a failure of the airbag to
inflate properly, both of which
could result in serious injury.
Do not attempt to service, repair, or modify the airbag
supplemental restraint systems or its fuses. See your authorized
dealer.
The front passenger airbag is not designed to offer protection to
an occupant in the center front seating position.
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
158
Vehicles with a higher center of gravity such as utility vehicles
and trucks handle differently than vehicles with a lower center
of gravity. Utility vehicles and trucks are
not
designed for cornering at
speeds as high as passenger cars any more than low-slung sports cars
are designed to perform satisfactorily under off-road conditions. Avoid
sharp turns, excessive speed or abrupt maneuvers in these vehicles.
Failure to drive cautiously could result in an increased risk of loss of
vehicle control, vehicle rollover, personal injury and death.
Loaded vehicles, with a higher center of gravity, may handle
differently than unloaded vehicles. Do not overload your vehicle
and use extra precautions, such as driving at slower speeds, avoiding
abrupt steering changes and allowing for increased stopping distance,
when driving a heavily loaded vehicle. Over-loading or loading the
vehicle improperly can deteriorate handling capability and contribute
to loss of vehicle control and vehicle rollover.
AUTOMATIC TRANSMISSION OPERATION
Brake-shift interlock - floor-shift transmission
This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the ON position unless the brake pedal is depressed.
If you cannot move the gearshift lever out of P (Park) with ignition in
the ON position and the brake pedal depressed, it is possible that a fuse
has blown or the vehicle’s brakelamps are not operating properly. Refer
to
Fuses and relays
in the
Roadside Emergencies
chapter.
If the fuse is not blown, perform the following procedure:
1. Apply the parking brake, turn the ignition to LOCK, then remove the
key.
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Driving
221
This switch is located in the front
passenger’s footwell, behind the kick
panel access cover, to the left of the
fuse box. The access cover needs to
be removed to reset the fuel pump
shut-off switch.
To reset the switch:
1. Turn the ignition OFF.
2. Check the fuel system for leaks.
3. If no leaks are apparent, reset the
switch by pushing in on the reset
button.
4. Turn the ignition ON.
5. Wait a few seconds and return
the key to OFF.
6. Make another check for leaks.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
15
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
243
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
Yellow
70A
Tan
Brown
80A
Natural
Black
Black
Passenger compartment fuse panel / power distribution box
The fuse panel is located under the right-hand side of the instrument
panel. Remove the trim panel and fuse box cover to access the fuses.
To remove the fuse box cover, place
a finger behind the PULL tab and
your thumb above the PULL tab as
shown in the illustration, then pull
the cover off.
To reinstall the fuse box cover, place the top part of the cover on the
fuse panel, then push the bottom part of the cover until you hear it click
shut. Gently pull on the cover to make sure it is seated properly.
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
244
Always disconnect the battery before servicing high current
fuses.
To reduce risk of electrical shock, always replace the cover to
the Power Distribution Box and Auxiliary Relay Box before
reconnecting the battery or refilling fluid reservoirs.
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and Specifications
chapter.
The fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
1
10A*
Run/Accessory - Wipers,
Instrument cluster
2
20A*
Stop/Turn lamps, Brake on/off
switch, Hazard flashers
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
245
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
3
7.5A*
Power mirrors, Memory seats and
pedals, Driver power seat
4
10A*
DVD battery power, Power fold
mirror
5
7.5A*
Keep alive memory for Powertrain
Control Module (PCM) and
climate control module
6
15A*
Parklamps, BSM, Instrument
panel illumination
7
5A*
Radio (start signal)
8
10A*
Heated mirrors, Switch indicator
9
20A*
Fuel pump relay, Fuel injectors
10
20A*
Trailer tow back-up lamps relay
(PCB1), Trailer tow parklamp
relay (R201)
11
10A*
A/C clutch, 4x4 solenoid
12
5A*
PCM relay coil
13
10A*
Climate control module power,
Flasher relay
14
10A*
Back-up lamp and Daytime
Running Lamps (DRL) relay coil,
A/C pressure switch, Redundant
speed control switch, Heated PCV,
Trailer tow back-up lamps relay
coil, ABS, Reverse park aid, EC
mirror, Navigation radio (reverse
input)
15
5A*
Overdrive cancel, Cluster,
Traction control switch
16
10A*
Brake-shift interlock solenoid
17
15A*
Fog lamp relay (R202)
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
246
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
18
10A*
Run/Start feed - Overhead power
point, Electrochromatic mirror,
Heated seats, BSM, Compass, RSS
(Reverse Sensing System)
19
10A*
Restraints (Air bag module), OCS
20
10A*
Battery feed for overhead power
point
21
15A*
Cluster keep alive power
22
10A*
Delayed accessory power for
audio, power door lock switch and
moon roof switch illumination
23
10A*
RH low beam headlamp
24
15A*
Battery saver power for demand
lamps
25
10A*
LH low beam headlamp
26
20A*
Horn relay (PCB3), Horn power
27
5A*
Passenger Air bag Deactivation
(PAD) warning lamp, Cluster RUN
/START power
28
5A*
SecuriLock transceiver (PATS)
29
15A*
PCM 4x4 power
30
15A*
PCM 4x4 power
31
20A*
Radio power, Satellite radio
module
32
15A*
Vapor Management Valve (VMV),
A/C clutch relay, Canister vent,
Heated Exhaust Gas Oxygen
(HEGO) sensors #11 and #21,
CMCV, Mass Air Flow (MAF)
sensor, VCT, Electronic fan clutch
33
15A*
Shift solenoid, CMS #12 and #22
34
15A*
Fuel injectors and PCM power
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
247
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
35
20A*
Instrument cluster high beam
indicator, High beam headlamps
36
10A*
Trailer tow right turn/stop lamps
37
20A*
Rear power point, Center console
power point
38
25A*
Subwoofer power
39
Not used
40
20A*
Low beam headlamps, DRL
41
Not used
42
10A*
Trailer tow left turn/stop lamps
101
30A**
Starter solenoid
102
20A**
Ignition switch feed
103
20A**
ABS valves
104
Not used
105
30A**
Electric trailer brakes
106
30A**
Trailer tow battery charge
107
30A**
Power door locks (BSM)
108
30A**
Passenger power seat
109
30A**
Driver power seat, Adjustable
pedals, Memory module (pedals,
seat, mirror)
110
20A**
Cigar lighter, Diagnostic connector
power
111
30A**
4x4 relays
112
40A**
ABS pump power
113
30A**
Wipers and washer pump
114
40A**
Heated backlite, Heated mirror
power
115
20A**
Moon roof
116
30A**
Blower motor
117
20A**
Instrument panel power point
118
30A**
Heated seats
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
248
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
401
30A Circuit
breaker
Delayed accessory power: Power
windows, Moon roof, Power
sliding backlite
R01
Full ISO relay
Starter solenoid
R02
Full ISO relay
Accessory delay
R03
Full ISO relay
Hi-beam headlamps
R04
Full ISO relay
Heated backlite
R05
Full ISO relay
Trailer tow battery charge
R06
Full ISO relay
Blower motor
R201
Half ISO relay
Trailer tow park lamps
R202
Half ISO relay
Fog lamps
R203
Half ISO relay
PCM
* Mini fuses ** Cartridge fuses
Auxiliary relay box
The relay box is located in the engine compartment on the left fender.
With Daytime Running Lamp (DRL) or 4x4 options
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
249
Without Daytime Running Lamp (DRL) and 4x4 options
The relays are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Description
F03
5A
Clockspring illumination
R01
Full ISO
Relay
4x4 CCW
R02
Full ISO
Relay
4x4 CW
R03
1
²
2
ISO
Relay
Daytime Running Lamps (DRL) high beam
disable
R201
Relay
DRL
R202
Relay
A/C clutch
D01
Diode
A/C clutch
D02
Diode
One Touch Integrated Start (OTIS)
CHANGING THE TIRES
If you get a flat tire while driving, do not apply the brake heavily.
Instead, gradually decrease your speed. Hold the steering wheel firmly
and slowly move to a safe place on the side of the road.
Note:
The tire pressure monitoring system (TPMS) indicator light will
illuminate when the spare tire is in use. To restore the full functionality
of the monitoring system, all road wheels equipped with tire pressure
monitoring sensors must be mounted on the vehicle.
Have a flat serviced by an authorized dealer in order to prevent damage
to the TPMS sensors, refer to
Tire Pressure Monitoring System
(TPMS)
in the
Tires, Wheels and Loading
chapter. Replace the spare
tire with a road tire as soon as possible.
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
250
With pressure applied with palms and side latches squeezed down, pull
downward on the entire storage bin and remove.
AUXILIARY POWER POINT (12VDC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
The auxiliary power point is located
on the instrument panel.
Do not use the power point for
operating the cigarette lighter
element (if equipped).
To prevent the fuse from being
blown, do not use the power
point(s) over the vehicle capacity of
12 VDC/180W. If the power point or
cigar lighter socket is not working, a
fuse may have blown. Refer to
Fuses and relays
in the
Roadside
Emergencies
chapter for information on checking and replacing fuses.
To have full capacity usage of your power point, the engine is required to
be running to avoid unintentional discharge of the battery. To prevent
the battery from being discharged:
do not use the power point longer than necessary when the engine is
not running,
do not leave battery chargers, video game adapters, computers and
other devices plugged in overnight or when the vehicle is parked for
extended periods.
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
86
Never place your arms or feet over the airbag module as a
deploying airbag can result in serious fractures or other injuries.
To properly position yourself away from the airbag:
Move your seat to the rear as far as you can while still reaching the
pedals comfortably.
Recline the seat slightly one or two degrees from the upright position.
Do not put anything on or
over the airbag cover (1).
Placing objects on or over the
airbag cover may cause those
objects to be thrown by the airbag
into your face and torso or may
result in a failure of the airbag to
inflate properly, both of which
could result in serious injury.
Do not attempt to service, repair, or modify the airbag
supplemental restraint systems or its fuses. See your authorized
dealer.
The front passenger airbag is not designed to offer protection to
an occupant in the center front seating position.
Modifying or adding equipment to the front end of the vehicle
(including frame, bumper, front end body structure and tow
hooks) may affect the performance of the airbag system, increasing the
risk of injury. Do not modify the front end of the vehicle.
Additional equipment may affect the performance of the airbag
sensors increasing the risk of injury. Please refer to the
Body
Builders Layout Book
for instructions about the appropriate
installation of additional equipment.
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
157
Loaded vehicles, with a higher center of gravity, may handle
differently than unloaded vehicles. Do not overload your vehicle
and use extra precautions, such as driving at slower speeds, avoiding
abrupt steering changes and allowing for increased stopping distance,
when driving a heavily loaded vehicle. Over-loading or loading the
vehicle improperly can deteriorate handling capability and contribute
to loss of vehicle control and vehicle rollover.
AUTOMATIC TRANSMISSION OPERATION
Brake-shift interlock - floor-shift transmission
This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the ON position unless the brake pedal is depressed.
If you cannot move the gearshift lever out of P (Park) with ignition in
the ON position and the brake pedal depressed, it is possible that a fuse
has blown or the vehicle’s brakelamps are not operating properly. Refer
to
Fuses and relays
in the
Roadside Emergencies
chapter.
If the fuse is not blown, perform the following procedure:
1. Apply the parking brake, turn the ignition to LOCK, then remove the
key.
2. Open the center console bin.
Using a screwdriver, carefully pry off
the console finish panel surrounding
the shifter mechanism by inserting a
screwdriver into the latch slot as
shown.
3. Remove console finish panel
assembly to expose the inside of the
gearshift.
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Driving
219
This switch is located in the front
passenger’s footwell, behind the kick
panel access cover, to the left of the
fuse box. The access cover needs to
be removed to reset the fuel pump
shut-off switch.
To reset the switch:
1. Turn the ignition OFF.
2. Check the fuel system for leaks.
3. If no leaks are apparent, reset the
switch by pushing in on the reset
button.
4. Turn the ignition ON.
5. Wait a few seconds and return
the key to OFF.
6. Make another check for leaks.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
15
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
240
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
Yellow
70A
Tan
Brown
80A
Natural
Black
Black
Passenger compartment fuse panel / power distribution box
The fuse panel is located under the right-hand side of the instrument
panel. Remove the trim panel and fuse box cover to access the fuses.
To remove the fuse box cover, place
a finger behind the PULL tab and
your thumb above the PULL tab as
shown in the illustration, then pull
the cover off.
To reinstall the fuse box cover, place the top part of the cover on the
fuse panel, then push the bottom part of the cover until you hear it click
shut. Gently pull on the cover to make sure it is seated properly.
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
241
Always disconnect the battery before servicing high current
fuses.
To reduce risk of electrical shock, always replace the cover to
the Power Distribution Box and Auxiliary Relay Box before
reconnecting the battery or refilling fluid reservoirs.
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and Specifications
chapter.
The fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
1
10A*
Run/Accessory - Wipers,
Instrument cluster
2
20A*
Stop/Turn lamps, Brake on/off
switch, Hazard flashers
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
242
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
3
7.5A*
Power mirrors, Memory seats and
pedals, Driver power seat
4
10A*
DVD battery power, Power fold
mirror
5
7.5A*
Keep alive memory for Powertrain
Control Module (PCM) and
climate control module
6
15A*
Parklamps, BSM, Instrument
panel illumination
7
5A*
Radio (start signal)
8
10A*
Heated mirrors, Switch indicator
9
20A*
Fuel pump relay, Fuel injectors
10
20A*
Trailer tow back-up lamps relay
(PCB1), Trailer tow parklamp
relay (R201)
11
10A*
A/C clutch, 4x4 solenoid
12
5A*
PCM relay coil
13
10A*
Climate control module power,
Flasher relay
14
10A*
Back-up lamp and Daytime
Running Lamps (DRL) relay coil,
A/C pressure switch, Redundant
speed control switch, Heated PCV,
Trailer tow back-up lamps relay
coil, ABS, Reverse park aid, EC
mirror, Navigation radio (reverse
input)
15
5A*
Overdrive cancel, Cluster,
Traction control switch
16
10A*
Brake-shift interlock solenoid
17
15A*
Fog lamp relay (R202)
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
243
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
18
10A*
Run/Start feed - Overhead power
point, Electrochromatic mirror,
Heated seats, BSM, Compass, RSS
(Reverse Sensing System)
19
10A*
Restraints (Air bag module), OCS
20
10A*
Battery feed for overhead power
point
21
15A*
Cluster keep alive power
22
10A*
Delayed accessory power for
audio, power door lock switch and
moon roof switch illumination
23
10A*
RH low beam headlamp
24
15A*
Battery saver power for demand
lamps
25
10A*
LH low beam headlamp
26
20A*
Horn relay (PCB3), Horn power
27
5A*
Passenger Air bag Deactivation
(PAD) warning lamp, Cluster RUN
/START power
28
5A*
SecuriLock transceiver (PATS)
29
15A*
PCM 4x4 power
30
15A*
PCM 4x4 power
31
20A*
Radio power, Satellite radio
module
32
15A*
Vapor Management Valve (VMV),
A/C clutch relay, Canister vent,
Heated Exhaust Gas Oxygen
(HEGO) sensors #11 and #21,
CMCV, Mass Air Flow (MAF)
sensor, VCT, Electronic fan clutch
33
15A*
Shift solenoid, CMS #12 and #22
34
15A*
Fuel injectors and PCM power
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
244
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
35
20A*
Instrument cluster high beam
indicator, High beam headlamps
36
10A*
Trailer tow right turn/stop lamps
37
20A*
Rear power point, Center console
power point
38
25A*
Subwoofer power
39
Not used
40
20A*
Low beam headlamps, DRL
41
Not used
42
10A*
Trailer tow left turn/stop lamps
101
30A**
Starter solenoid
102
20A**
Ignition switch feed
103
20A**
ABS valves
104
Not used
105
30A**
Electric trailer brakes
106
30A**
Trailer tow battery charge
107
30A**
Power door locks (BSM)
108
30A**
Passenger power seat
109
30A**
Driver power seat, Adjustable
pedals, Memory module (pedals,
seat, mirror)
110
20A**
Cigar lighter, Diagnostic connector
power
111
30A**
4x4 relays
112
40A**
ABS pump power
113
30A**
Wipers and washer pump
114
40A**
Heated backlite, Heated mirror
power
115
20A**
Moon roof
116
30A**
Blower motor
117
20A**
Instrument panel power point
118
30A**
Heated seats
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
245
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
401
30A Circuit
breaker
Delayed accessory power: Power
windows, Moon roof, Power
sliding backlite
R01
Full ISO relay
Starter solenoid
R02
Full ISO relay
Accessory delay
R03
Full ISO relay
Hi-beam headlamps
R04
Full ISO relay
Heated backlite
R05
Full ISO relay
Trailer tow battery charge
R06
Full ISO relay
Blower motor
R201
Half ISO relay
Trailer tow park lamps
R202
Half ISO relay
Fog lamps
R203
Half ISO relay
PCM
* Mini fuses ** Cartridge fuses
Auxiliary relay box
The relay box is located in the engine compartment on the left fender.
With Daytime Running Lamp (DRL) or 4x4 options
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
246
Without Daytime Running Lamp (DRL) and 4x4 options
The relays are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Description
F03
5A
Clockspring illumination
R01
Full ISO
Relay
4x4 CCW
R02
Full ISO
Relay
4x4 CW
R03
1
²
2
ISO
Relay
Daytime Running Lamps (DRL) high beam
disable
R201
Relay
DRL
R202
Relay
A/C clutch
D01
Diode
A/C clutch
D02
Diode
One Touch Integrated Start (OTIS)
CHANGING THE TIRES
If you get a flat tire while driving, do not apply the brake heavily.
Instead, gradually decrease your speed. Hold the steering wheel firmly
and slowly move to a safe place on the side of the road.
Note:
The tire pressure monitoring system (TPMS) indicator light will
illuminate when the spare tire is in use. To restore the full functionality
of the monitoring system, all road wheels equipped with tire pressure
monitoring sensors must be mounted on the vehicle.
Have a flat serviced by an authorized dealer in order to prevent damage
to the TPMS sensors, refer to
Tire Pressure Monitoring System
(TPMS)
in the
Tires, Wheels and Loading
chapter. Replace the spare
tire with a road tire as soon as possible.
2008 Mark LT
(mlt)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
247