Ford Mariner Hybrid - 2006 Fuse Box Diagram

Ford Mariner Hybrid - 2006 Fuse Box Diagram

CENTER CONSOLE
Your vehicle is equipped with a variety of console features. These
include:
1. Power point
2. Cupholders
3. Utility compartment
4. Ash cup (if equipped)
Use only soft cups in the
cupholders. Hard objects
can injure you in a collision.
AUXILIARY POWER POINT (12V)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
The auxiliary power point is located
in the floor console. Cigarette lighter
(if equipped) is located in the
instrument panel.
Do not use the power point for
operating the cigarette lighter
element (if equipped).
To prevent the fuse from being
blown, do not use the power
point(s) over the vehicle capacity of
12 VDC/180W.
To prevent the battery from being discharged, do not use the power
point longer than necessary when the engine is not running.
Always keep the power point caps closed when not being used.
Cigar/Cigarette lighter (if equipped)
Do not plug optional electrical accessories into the cigarette lighter
socket.
2006 Mariner Hybrid
(mhv)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
88
Do not attempt to service, repair, or modify the airbag
supplemental restraint systems or its fuses. See your authorized
dealer.
Modifications to the front end of the vehicle, including frame,
bumper, front end body structure, tow hooks and B-pillar
surrounding parts may affect the performance of the airbag sensors
increasing the risk of injury. Do not modify the front end of the
vehicle.
Additional equipment may affect the performance of the airbag
sensors increasing the risk of injury. Please refer to the
Body
Builders Layout Book
for instructions about the appropriate
installation of additional equipment.
Children and airbags
Children must always be properly
restrained. Accident statistics
suggest that children are safer when
properly restrained in the rear
seating positions than in the front
seating position. Failure to follow
these instructions may increase the
risk of injury in a collision.
Airbags can kill or injure a
child in a child seat.
NEVER
place a rear-facing child
seat in front of an active airbag. If
you must use a forward-facing
child seat in the front seat, move
the seat all the way back.
2006 Mariner Hybrid
(mhv)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
147
Do not attempt to service, repair, or modify the airbag SRS, its
fuses or the seat cover on a seat containing an airbag. See an
authorized dealer.
All occupants of the vehicle should always wear their safety belts
even when an airbag SRS is provided.
How does the side airbag system work?
The design and development of the
side airbag system included
recommended testing procedures
that were developed by a group of
automotive safety experts known as
the Side Airbag Technical Working
Group. These recommended testing
procedures help reduce the risk of
injuries related to the deployment of
side airbags.
The side airbag system consists of
the following:
An inflatable nylon bag (airbag)
with a gas generator concealed
behind the outboard bolster of
the driver and front passenger
seatbacks.
A special seat cover designed to allow airbag deployment.
The same warning light, electronic control and diagnostic unit as used
for the front airbags.
Two crash sensors located on the lower portion of the b-pillar (one on
each side of the vehicle).
Side airbags, in combination with safety belts, can help reduce the risk of
severe injuries in the event of a significant side impact collision.
The side airbags are fitted on the outboard side of the seatbacks of the
front seats. In certain lateral collisions, the airbag on the side affected by
the collision will be inflated. If the front passenger sensing system
detects an empty seat, the front passenger seat-mounted side airbag will
be deactivated. The airbag was designed to inflate between the door
panel and occupant to further enhance the protection provided
occupants in side impact collisions.
2006 Mariner Hybrid
(mhv)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
155
Safety Canopy
²
system (if equipped)
Do not place objects or
mount equipment on or
near the headliner at the siderail
that may come into contact with a
deploying Safety Canopy
±
. Failure
to follow these instructions may
increase the risk of personal injury
in the event of a collision.
Do not lean your head on the door. The Safety Canopy
±
could
injure you as it deploys from the headliner.
Do not attempt to service, repair, or modify the Safety Canopy
±
system, its fuses, the A, B, or C pillar trim, or the headliner on a
vehicle containing a Safety Canopy
±
. See your authorized dealer.
All occupants of the vehicle including the driver should always
wear their safety belts even when an airbag SRS and Safety
Canopy
±
system is provided.
To reduce risk of injury, do not obstruct or place objects in the
deployment path of the inflatable Safety Canopy
±
.
2006 Mariner Hybrid
(mhv)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
157
Loaded vehicles, with a higher center of gravity, may handle
differently than unloaded vehicles. Extra precautions such as
slower speeds and increased stopping distance should be taken when
driving a heavily loaded vehicle.
AUTOMATIC TRANSMISSION OPERATION
Brake-shift interlock
This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the RUN position unless brake pedal is depressed.
If you cannot move the gearshift lever out of P (Park) with ignition in
the RUN position and the brake pedal depressed, it is possible that a
fuse has blown or the vehicle’s brake lamps are not operating properly.
Refer to
Fuses and relays
in the
Roadside Emergencies
chapter.
If the fuse is not blown, perform the following procedure:
1. Apply the parking brake.
2. Using a screwdriver or similar
tool, carefully pry out the small,
round, tethered Brake Transmission
Shift Interlock (BTSI) cover cap
located to the right of the gearshift
lever.
3. Depress the brake pedal and then start the vehicle.
2006 Mariner Hybrid
(mhv)
Owners Guide (post-2002-fmt)
USA
(fus)
Driving
213
The high voltage shut-off switch is
located in the cargo area on the
passenger side of the vehicle in the
jack compartment, behind the jack
access door.
To reset the switch(es):
1. Turn the ignition to LOCK.
2. Check the fuel system for leaks.
3. If no leaks are apparent, reset the switch by pushing in on the reset
button. Both switches should be checked and reset.
4. Turn the ignition to RUN.
5. Wait a few seconds and return the key to LOCK.
6. Make another check for leaks.
If you see or smell fuel, do not reset the fuel pump shut-off or try to
start your vehicle; you could injure yourself or others. Have all the
passengers get out of the vehicle and call the local fire department or a
towing service.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
15
2006 Mariner Hybrid
(mhv)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
228
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
70A
Tan
Brown
80A
Natural
Black
2006 Mariner Hybrid
(mhv)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
229
Passenger compartment fuse panel
The fuse panel is located on the
right-hand side of the center
console, by the instrument panel.
Remove the panel cover to access
the fuses.
2006 Mariner Hybrid
(mhv)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
230
The fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse Panel
Description
1
Not used
2
Not used
3
15A*
Front and rear park lamps
4
10A*
Ignition switch
5
2A*
Powertrain Control Module (PCM relay),
PATS module
6
15A*
Stop lamps
7
10A*
Instrument cluster, Power mirror switch,
Radio
8
Not used
9
30A**
Power door locks
10
15A*
Heated mirrors, Rear defroster switch
indicator
11
15A*
Moon roof
12
5A*
Radio
13
Not used
14
Not used
15
30A**
Power windows
16
15A*
Subwoofer
17
15A*
Low beams
18
10A*
4x4
19
Not used
20
15A*
Horn
21
10A*
Rear wiper motor, Rear wiper washer
22
10A*
Instrument cluster
23
Not used
24
20A*
Cigar lighter
25
20A*
Front wiper motor, Front wiper washer
26
5A*
Climate control system mode switch
2006 Mariner Hybrid
(mhv)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
231
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse Panel
Description
27
5A*
Traction (high voltage) Battery Control
Module (TBCM), Injectors
28
10A*
Instrument cluster
29
10A*
Back-up lamps, Reverse park aid
30
Not used
31
Not used
32
10A*
Spare
33
15A*
Air bag module
34
5A*
Brake System Control Module (BSCM),
Power Steering Control Module (PSCM)
35
5A*
4x4, Heated seats
* Mini fuse ** Cartridge fuse
Power distribution box
The power distribution box is located in the engine compartment. The
power distribution box contains high-current fuses that protect your
vehicle’s main electrical systems from overloads.
Always disconnect the low voltage (underhood) battery before
servicing high current fuses.
To reduce risk of electrical shock, always replace the cover to
the power distribution box before reconnecting the low voltage
(underhood) battery or refilling fluid reservoirs.
If the low voltage (underhood) battery has been disconnected and
reconnected, refer to the
Low voltage (underhood) battery
section of
the
Maintenance and Specifications
chapter.
2006 Mariner Hybrid
(mhv)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
232
The fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box Description
1
5A*
Brake module
2
10A*
Climate control
3
5A*
Transaxle Control Module (TCM)
4
7.5A*
Traction (high voltage) Battery Control
Module (TBCM), Powertrain Control Module
(PCM)
5
5A*
Interlock
6
15A*
PCM power
7
15A*
Heated Exhaust Gas Oxygen (HEGO) sensors
8
10A*
TCM VPWR
9
20A*
Fuel pump
10
30A*
Bussed power feed to PDB fuses 1, 2, 3, 4
11
20A*
Foglamps
12
25A*
Exterior lighting
13
25A*
B+ lighting
14
Not used
15
20A*
Ignition main
2006 Mariner Hybrid
(mhv)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
233
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box Description
16
15A*
A/C clutch
17
20A*
Power point
18
30A*
Injectors, COP (Coil-on-plug)
19
40A**
Climate control blower
20
40A**
Cooling fan #1
21
40A**
PCM power
22
40A**
SJB power (Passenger compartment fuse
box) power #1
23
40A**
SJB (Passenger compartment fuse box)
power #2
24
50A**
BSCM #1
25
50A**
Power Steering Control Module (PSCM) #1
26
50A**
TBCM (high voltage battery) cooling fans
and jump start
27
40A**
Cooling fan #2
28
40A**
Rear defroster, Heated mirrors
29
20A**
Heated seats
30
40A**
SJB (Passenger compartment fuse box)
power #3
31
50A**
BSCM #2
32
50A**
PSCM #2
001
Relay
Power sustain for PCM, TBCM and
Transaxle Control Module (TCM)
002
Relay
PCM power
003
Relay
Injector
004
Relay
Auxiliary coolant pump
005
Relay
Motor/Electronic coolant pump
006
Relay
Foglamps
007
Relay
A/C clutch
Diode 01
A/C clutch
Diode 02
Not used
* Mini fuse **Cartridge fuse
2006 Mariner Hybrid
(mhv)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
234
Auxiliary relay box
The relay box is located on the radiator support (left of the hood latch).
Fuse/Relay Location
Description
Relay 1
Driver side cooling fan
Relay 2
Passenger side cooling fan (low-speed)
Relay 3
Passenger side cooling fan (high-speed)
CHANGING A FLAT TIRE
If you get a flat tire while driving:
do not brake heavily.
gradually decrease the vehicle’s speed.
hold the steering wheel firmly.
slowly move to a safe place on the side of the road.
Your vehicle may be equipped with a conventional spare tire that is
different in one or more of the following: type, brand, size, speed rating
and tread design. If this is the case, this dissimilar spare tire is still rated
for your vehicle loads (GAWR and GVWR). Your vehicle may be equipped
1
2
3
2006 Mariner Hybrid
(mhv)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
235