Ford Mariner - 2009 Fuse Box Diagram

Ford Mariner - 2009 Fuse Box Diagram

The tray and inside bin can be
removed to open up space to fit a
laptop computer, MP3 players, CDs
or handbags. To remove, open the
console lid and pull the bin straight
up and out from the console
housing.
The sliding tray and inside bin can
be hooked on the side or rear of the
console for extra storage.
AUXILIARY POWER POINT (12VDC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
2009 Mariner
(mrn)
Owners Guide, 1st Printing
USA
(fus)
Driver Controls
60
The auxiliary power point is located
in the instrument panel.
A second auxiliary power point is
located on the rear side of the
center console.
Do not use the power point for
operating the cigarette lighter
element (if equipped).
To prevent the fuse from being
blown, do not use the power
point(s) over the vehicle capacity of 12 VDC/180W. If the power point or
cigar lighter socket is not working, a fuse may have blown. Refer to
Fuses and relays
in the
Roadside Emergencies
chapter for information
on checking and replacing fuses.
To have full capacity usage of your power point, the engine is required to
be running to avoid unintentional discharge of the battery. To prevent
the battery from being discharged:
do not use the power point longer than necessary when the engine is
not running,
do not leave battery chargers, video game adapters, computers and
other devices plugged in overnight or when the vehicle is parked for
extended periods.
Always keep the power point caps closed when not being used.
Cigar/Cigarette lighter (if equipped)
Do not plug optional electrical accessories into the cigarette lighter
socket.
Do not hold the lighter in with your hand while it is heating, this will
damage the lighter element and socket. The lighter will be released from
its heating position when it is ready to be used.
Note:
Improper use of the lighter can cause damage not covered by your
warranty, and can result in fire or serious injury.
2009 Mariner
(mrn)
Owners Guide, 1st Printing
USA
(fus)
Driver Controls
61
WARNING:
Never place your arm over the airbag module as a
deploying airbag can result in serious arm fractures or other
injuries.
To properly position yourself away from the airbag:
Move your seat to the rear as far as you can while still reaching the
pedals comfortably.
Recline the seat slightly one or two degrees from the upright position.
WARNING:
Do not put anything on or over the airbag module.
Placing objects on or over the airbag inflation area may cause
those objects to be propelled by the airbag into your face and torso
causing serious injury.
WARNING:
Do not attempt to service, repair, or modify the
airbag supplemental restraint systems or its fuses. See your
authorized dealer.
WARNING:
Modifications to the front end of the vehicle,
including frame, bumper, front end body structure, tow hooks
and B-pillar surrounding parts may affect the performance of the
airbag sensors increasing the risk of injury. Do not modify the front
end of the vehicle.
WARNING:
Additional equipment may affect the performance of
the airbag sensors increasing the risk of injury. Please refer to
the
Body Builders Layout Book
for instructions about the appropriate
installation of additional equipment.
2009 Mariner
(mrn)
Owners Guide, 1st Printing
USA
(fus)
Seating and Safety Restraints
127
A difficulty with the system is indicated by one or more of the following:
The readiness light will either
flash or stay lit.
The readiness light will not
illuminate immediately after
ignition is turned on.
A series of five beeps will be heard. The tone pattern will repeat
periodically until the problem and/or light are repaired.
If any of these things happen, even intermittently, have the SRS serviced
at an authorized dealer immediately. Unless serviced, the system may not
function properly in the event of a collision.
Seat-mounted side airbag system
WARNING:
Do not place objects or mount equipment on or
near the airbag cover on the side of the seatbacks of the front
seats or in front seat areas that may come into contact with a
deploying airbag. Failure to follow these instructions may increase the
risk of personal injury in the event of a collision.
WARNING:
Do not use accessory seat covers. The use of
accessory seat covers may prevent the deployment of the side
airbags and increase the risk of injury in an accident.
WARNING:
Do not lean your head on the door. The side airbag
could injure you as it deploys from the side of the seatback.
WARNING:
Do not attempt to service, repair, or modify the
airbag SRS, its fuses or the seat cover on a seat containing an
airbag. See an authorized dealer.
WARNING:
All occupants of the vehicle should always wear
their safety belts even when an airbag SRS is provided.
2009 Mariner
(mrn)
Owners Guide, 1st Printing
USA
(fus)
Seating and Safety Restraints
135
Safety Canopy
³
system
WARNING:
Do not place
objects or mount equipment
on or near the headliner at the
siderail that may come into
contact with a deploying Safety
Canopy
±
. Failure to follow these
instructions may increase the risk
of personal injury in the event of a
collision.
WARNING:
Do not lean your head on the door. The Safety
Canopy
±
could injure you as it deploys from the headliner.
WARNING:
Do not attempt to service, repair, or modify the
Safety Canopy
±
system, its fuses, the A, B, or C pillar trim, or
the headliner on a vehicle containing a Safety Canopy
±
. See your
authorized dealer.
WARNING:
All occupants of the vehicle including the driver
should always wear their safety belts even when an airbag SRS
and Safety Canopy
±
system is provided.
WARNING:
To reduce risk of injury, do not obstruct or place
objects in the deployment path of the inflatable Safety Canopy
±
.
2009 Mariner
(mrn)
Owners Guide, 1st Printing
USA
(fus)
Seating and Safety Restraints
138
WARNING:
Loaded vehicles, with a higher center of gravity,
may handle differently than unloaded vehicles. Do not overload
your vehicle and use extra precautions, such as driving at slower
speeds, avoiding abrupt steering changes and allowing for increased
stopping distance, when driving a heavily loaded vehicle. Over-loading
or loading the vehicle improperly can deteriorate handling capability
and contribute to loss of vehicle control and vehicle rollover.
AUTOMATIC TRANSMISSION OPERATION
Brake-shift interlock
This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the on position unless brake pedal is depressed.
If you cannot move the gearshift lever out of P (Park) with ignition in
the on position and the brake pedal depressed, it is possible that a fuse
has blown or the vehicle’s brakelamps are not operating properly. Refer
to
Fuses and relays
in the
Roadside Emergencies
chapter.
If the fuse is not blown, perform the following procedure:
1. Apply the parking brake, turn the ignition to off, then remove the key.
2. Using a screwdriver or similar
tool, carefully pry out the small
Brake Transmission Shift Interlock
(BTSI) cover cap located to the
right of the gearshift lever.
3. Insert a screwdriver or similar
tool straight down into the access
hole and press downward while
pulling the gearshift lever out of the
P (Park) position and into the N
(Neutral) position.
2009 Mariner
(mrn)
Owners Guide, 1st Printing
USA
(fus)
Driving
209
This switch is located in the front
passenger’s footwell, behind a
flip-up cover, by the kick panel
access cover.
To reset the switch:
1. Turn the ignition to the off
position.
2. Check the fuel system for leaks.
3. If no leaks are apparent, reset the
switch by pushing in on the reset
button.
4. Turn the ignition to the on
position.
5. Wait a few seconds and return
the key to the off position.
6. Make another check for leaks.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
15
2009 Mariner
(mrn)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
226
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
Yellow
70A
Tan
Brown
80A
Natural
Black
Black
Passenger compartment fuse panel
The fuse panel is located on the
right-hand side of the center
console, by the instrument panel.
Remove the panel cover to access
the fuse cover. Press the tabs on the
top and bottom of the fuse cover to
remove.
2009 Mariner
(mrn)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
227
The fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
1
30A
Not used (spare)
2
15A
Brake On/Off switch
3
15A
Sync module
4
30A
Moon roof
5
10A
Keypad illumination, Brake Shift
Interlock (BSI), SPDJB
6
20A
Turn signals, Stop lamps
7
10A
Low beam headlamps (left)
8
10A
Low beam headlamps (right)
9
15A
Interior lights
10
15A
Backlighting
11
10A
Four wheel drive
12
7.5A
Power mirror switch
13
5A
Not used (spare)
14
10A
FCIM (radio buttons), Satellite
radio, Front display module
15
10A
Climate control
2009 Mariner
(mrn)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
228
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
16
15A
Not used (spare)
17
20A
All lock motor feeds, Liftgate
release, Liftglass release
18
20A
Heated seat
19
25A
Rear wiper
20
15A
Datalink
21
15A
Fog lamps
22
15A
Park lamps
23
15A
High beam headlamps
24
20A
Horn relay
25
10A
Demand lamps
26
10A
Instrument panel cluster
27
20A
Ignition switch
28
5 A
Radio
29
5A
Instrument panel cluster
30
5A
Not used (spare)
31
10A
Restraints control module
32
10A
Not used (spare)
33
10A
Not used (spare)
34
5A
Anti-lock brake system (ABS)
35
10A
Four wheel drive, Electric Power
Steering Module (EPAS) , Park
aid module
36
5A
PATS transceiver
37
10A
Climate control
38
20A
Subwoofer/Amp (Audiophile
radio)
39
20A
Radio, Radio Amplifier
(Navigation only)
40
20A
Front power point
2009 Mariner
(mrn)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
229
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
41
15A
Driver/passenger door lock
switches, Automatic dimming
mirror, Compass, Ambient
lighting, Moon roof
42
10A
Not used (spare)
43
10A
Rear wiper logic, Heated seats
relay, Instrument cluster
44
10A
Not used (spare)
45
5A
Front wiper logic, Blower motor
relay
46
7.5A
OCS (restraints), PADI
(restraints)
47
30A Circuit
Breaker
Power windows
48
Delayed accessory relay
Power distribution box
The power distribution box is
located in the engine compartment.
The power distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
from overloads.
WARNING:
Always disconnect the battery before servicing high
current fuses.
WARNING:
To reduce risk of electrical shock, always replace
the cover to the Power Distribution Box before reconnecting the
battery or refilling fluid reservoirs.
2009 Mariner
(mrn)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
230
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and Specifications
chapter.
The high-current fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
A
80A Midi
Electronic power steering module
(EPAS)
B
125A Midi
SPDJB
1
15A*
Heated mirror
2
30A**
Rear defroster
3
20A**
Rear power point (center console)
4
Not used
5
10A*
Powertrain Control Module (PCM)
Keep Alive power, PCM relay,
Canister vent
6
15A*
Alternator
7
15A*
Liftgate latch
8
20A*
Trailer tow parking lamps
9
50A**
Anti-lock Brake System (ABS)
10
30A**
Front wipers
11
30A**
Starter
12
40A**
Blower motor
2009 Mariner
(mrn)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
231
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
13
10A*
A/C clutch
14
15A*
Trailer tow turn lamps
15
Not used
16
40A**
Cooling fan 1
17
40A**
Cooling fan 2
18
20A**
ABS solenoid
19
30A**
Power seats
20
A/C clutch relay
21A
Rear defroster relay
21B
Fuel relay
21C
Blower relay
21D
PCM relay
22
20A*
Fuel pump
23
15A*
Fuel injectors
24
Not used
25
Not used
26
15A*
Ignition coils
27
10A*
PCM non mil-malfunction
indicator lamp
28
20A*
PCM mil-on malfunction indicator
lamp
29
15A*
Powertrain Control Module
30A
Cooling fan 1 relay
30B
Starter relay
30C
Cooling fan main relay
30D
Cooling fan 2 relay
31A
Reverse lamp relay
31B
Not used
31C
Trailer tow left turn relay
31D
Trailer tow right turn relay
31E
Trailer tow park relay
2009 Mariner
(mrn)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
232
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
31F
Liftgate latch relay
32
Not used
33
PCM diode
34
Start diode
35
10A*
Run/start, Reverse lamps, Rear
defrost relay
36
Not used
37
Not used
* Mini fuse ** Cartridge fuse
CHANGING A FLAT TIRE
If you get a flat tire while driving:
do not brake heavily.
gradually decrease the vehicle’s speed.
hold the steering wheel firmly.
slowly move to a safe place on the side of the road.
Your vehicle may be equipped with a conventional spare tire that is
different in one or more of the following: type, brand, size, speed rating
and tread design. If this is the case, this dissimilar spare tire is still rated
for your vehicle loads (GAWR and GVWR). This temporary spare tire is
not equipped with a Tire Pressure Monitor System (TPMS) sensor.
Note:
The tire pressure monitoring system (TPMS) indicator light will
illuminate when the spare is in use. To restore the full functionality of
the TPMS system, all road wheels equipped with the tire pressure
monitoring sensors must be mounted on the vehicle.
Have a flat tire serviced by an authorized dealer in order to prevent
damage to the TPMS sensor, refer to
Tire Pressure Monitoring System
(TPMS)
in the
Tires, Wheels, and Loading
chapter. Replace the spare
tire with a road tire as soon as possible. During repairing or replacing of
the flat tire, have the authorized dealer inspect the TPMS sensor for
damage.
WARNING:
The use of tire sealants may damage your Tire
Pressure Monitoring System and should not be used.
2009 Mariner
(mrn)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
233