Ford Mariner - 2006 Fuse Box Diagram

Ford Mariner - 2006 Fuse Box Diagram

the rubber actuator (1) is cut too long, the storage compartment door
(3) will not close properly. Excessive force to close the storage
compartment door (3) may cause the door latch to break.
Per the table below, cut the rubber actuator (1) to the proper length
based on the thickness (4) measured in the third step.
Approximate
Thickness of Transmitter
(GDO)
inches
mm
Cut to Bottom of
Notch
Less Than
1/4
6.35
No Cut
7/8
22.00
Notch 2
1.0
26.00
Notch 4
1–3/16
32.00
Notch 6
Reinstall the rubber actuator (1) in the storage compartment (7) by
twisting and pushing it back into the slot.
Install the transmitter (6) on to storage compartment door (3)
aligning the actuator control (8) with the rubber actuator (1). Close
the storage compartment door (3) to verify proper fit. Do not force
the storage compartment door (3) or you may break the door latch. If
the rubber actuator (1) is the proper length the storage compartment
door will close. Press the storage compartment door (3) to activate
the transmitter (6).
Illuminated visor mirror (if equipped)
Lift the mirror cover to turn on the
visor mirror lamps.
AUXILIARY POWER POINT (12VDC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
49
The auxiliary power point is located
in the floor console. Cigarette lighter
(if equipped) is located in the
instrument panel.
Do not use the power point for
operating the cigarette lighter
element (if equipped).
To prevent the fuse from being
blown, do not use the power
point(s) over the vehicle capacity of
12 VDC/180W.
To prevent the battery from being discharged, do not use the power
point longer than necessary when the engine is not running.
Always keep the power point caps closed when not being used.
Cigar/Cigarette lighter (if equipped)
Do not plug optional electrical accessories into the cigarette lighter
socket.
Do not hold the lighter in with your hand while it is heating, this will
damage the lighter element and socket. The lighter will be released from
its heating position when it is ready to be used.
Improper use of the lighter can cause damage not covered by your
warranty.
CENTER CONSOLE
Your vehicle is equipped with a variety of console features. These
include:
1. Power point
2. Cupholders
3. Ashcup (if equipped)
4. Utility compartment
Use only soft cups in the
cupholders. Hard objects
can injure you in a collision.
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
50
Never place your arm over the air bag module as a deploying air
bag can result in serious arm fractures or other injuries.
To properly position yourself away from the airbag:
Move your seat to the rear as far as you can while still reaching the
pedals comfortably.
Recline the seat slightly one or two degrees from the upright position.
Do not put anything on or over the air bag module. Placing
objects on or over the air bag inflation area may cause those
objects to be propelled by the air bag into your face and torso causing
serious injury.
Do not attempt to service, repair, or modify the airbag
supplemental restraint systems or its fuses. See your authorized
dealer.
Modifications to the front end of the vehicle, including frame,
bumper, front end body structure, tow hooks and B-pillar
surrounding parts may affect the performance of the airbag sensors
increasing the risk of injury. Do not modify the front end of the
vehicle.
Additional equipment may affect the performance of the airbag
sensors increasing the risk of injury. Please refer to the
Body
Builders Layout Book
for instructions about the appropriate
installation of additional equipment.
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
108
A difficulty with the system is indicated by one or more of the following:
The readiness light will either
flash or stay lit.
The readiness light will not
illuminate immediately after
ignition is turned on.
A series of five beeps will be heard. The tone pattern will repeat
periodically until the problem and/or light are repaired.
If any of these things happen, even intermittently, have the SRS serviced
at an authorized dealer immediately. Unless serviced, the system may not
function properly in the event of a collision.
Side airbag system (if equipped)
Do not place objects or mount equipment on or near the airbag
cover on the side of the seatbacks of the front seats or in front
seat areas that may come into contact with a deploying airbag. Failure
to follow these instructions may increase the risk of personal injury in
the event of a collision.
Do not use accessory seat covers. The use of accessory seat
covers may prevent the deployment of the side airbags and
increase the risk of injury in an accident.
Do not lean your head on the door. The side airbag could injure
you as it deploys from the side of the seatback.
Do not attempt to service, repair, or modify the airbag SRS, its
fuses or the seat cover on a seat containing an airbag. See an
authorized dealer.
All occupants of the vehicle should always wear their safety belts
even when an airbag SRS is provided.
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
114
Safety Canopy
³
system (if equipped)
Do not place objects or
mount equipment on or
near the headliner at the siderail
that may come into contact with a
deploying Safety Canopy
±
. Failure
to follow these instructions may
increase the risk of personal injury
in the event of a collision.
Do not lean your head on the door. The Safety Canopy
±
could
injure you as it deploys from the headliner.
Do not attempt to service, repair, or modify the Safety Canopy
±
system, its fuses, the A, B, or C pillar trim, or the headliner on a
vehicle containing a Safety Canopy
±
. See your authorized dealer.
All occupants of the vehicle including the driver should always
wear their safety belts even when an airbag SRS and Safety
Canopy
±
system is provided.
To reduce risk of injury, do not obstruct or place objects in the
deployment path of the inflatable Safety Canopy
±
.
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
117
Vehicles with a higher center of gravity such as utility and
four-wheel drive vehicles handle differently than vehicles with a
lower center of gravity. Utility and four-wheel drive vehicles are
not
designed for cornering at speeds as high as passenger cars any more
than low-slung sports cars are designed to perform satisfactorily under
off-road conditions. Avoid sharp turns, excessive speed and abrupt
maneuvers in these vehicles. Failure to drive cautiously could result in
an increased risk of loss of vehicle control, vehicle rollover, personal
injury and death.
Loaded vehicles, with a higher center of gravity, may handle
differently than unloaded vehicles. Extra precautions such as
slower speeds and increased stopping distance should be taken when
driving a heavily loaded vehicle.
AUTOMATIC TRANSMISSION OPERATION
Brake-shift interlock
This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the RUN position unless brake pedal is depressed.
If you cannot move the gearshift lever out of P (Park) with ignition in
the RUN position and the brake pedal depressed, it is possible that a
fuse has blown or the vehicle’s brakelamps are not operating properly.
Refer to
Fuses and relays
in the
Roadside Emergencies
chapter.
If the fuse is not blown, perform the following procedure:
1. Apply the parking brake, turn the ignition to LOCK, then remove the
key.
2. Using a screwdriver or similar
tool, carefully pry out the small,
round, tethered Brake Transmission
Shift Interlock (BTSI) cover cap
located to the right of the gearshift
lever.
P
R
N
D
2
1
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Driving
165
This switch is located in the front
passenger’s footwell, behind a
flip-up cover, by the kick panel
access cover.
To reset the switch:
1. Turn the ignition OFF.
2. Check the fuel system for leaks.
3. If no leaks are apparent, reset the
switch by pushing in on the reset
button.
4. Turn the ignition ON.
5. Wait a few seconds and return
the key to OFF.
6. Make another check for leaks.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
15
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
183
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
70A
Tan
Brown
80A
Natural
Black
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
184
Passenger compartment fuse panel
The fuse panel is located on the
right-hand side of the center
console, by the instrument panel.
Remove the panel cover to access
the fuses.
To remove a fuse use the fuse puller tool provided on the fuse panel
cover.
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
185
The fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
1
15A*
Trailer tow park lamps
2
Not used
3
15A*
Front and rear park lamps
4
10A*
Ignition switch
5
2A*
Powertrain Control Module (PCM
relay), Fuel pump relay, Main fan
relay, High/Low speed fan relay 2,
PATS module
6
15A*
Center High-Mounted Stop Lamp
(CHMSL), Stop lamps, PCM,
Anti-lock Brake System (ABS),
Speed control, Brake On-Off
switch
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
186
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
7
10A*
Instrument cluster, Diagnostic
connector, Power mirror switch,
Radio
8
Not used
9
30A**
Power door locks, Power seats
10
15A*
Heated mirrors
11
15A*
Sunroof, Electrochromatic mirror,
Compass
12
5A*
Radio
13
Not used
14
Not used
15
30A**
Power windows
16
15A*
Subwoofer
17
15A*
Low beams
18
10A*
4WD
19
Not used
20
15A*
Horn
21
10A*
Rear wiper motor, Rear wiper
washer
22
10A*
Instrument cluster
23
Not used
24
20A*
Cigar lighter
25
20A*
Front wiper motor, Front wiper
washer
26
5A*
Climate control system mode
switch
27
5A*
Canister vent, Speed control
cancel switch
28
10A*
Instrument cluster
29
10A*
Reverse park aid
30
Not used
31
Not used
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
187
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
32
10A*
Brake-Transmission shift lock
33
15A*
Air bag module, Passenger Air bag
Deactivation (PAD) indicator
lamp, Occupant Classification
Sensor (OCS)
34
5A*
ABS module, Evac and Fill, Speed
control
35
5A*
Heated seats module, 4WD
* Mini fuse ** Cartridge fuse
Power distribution box
The power distribution box is
located in the engine compartment.
The power distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
from overloads.
Always disconnect the battery before servicing high current
fuses.
To reduce risk of electrical shock, always replace the cover to
the Power Distribution Box before reconnecting the battery or
refilling fluid reservoirs.
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and Specifications
chapter.
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
188
The high-current fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
1
Not used
2
25A*
Headlamp power
3
25A*
High beams, Turn signals, Interior
lamps, Headlamp power
4
5A*
Keep Alive Power (KA PWR)
5
15A*
Heated Exhaust Gas Oxygen
(HEGO) sensors
6
20A*
Fuel pump
7
40A**
RUN/ACC relay -
Electrochromatic mirror, Cigar
lighter, Front and rear wipers,
Compass
8
30A**
Powertrain Control Module
(PCM), Injectors and coil
9
15A*
Alternator
10
30A*
Heated seats
11
10A*
PCM
12
20A*
Power point
13
20A*
Fog lamps
14
15A*
A/C clutch, A/C relay
15
30A*
Anti-lock Brake System (ABS)
solenoid
16
25A*
I/P fuse panel (RUN/START)
17
50A**
Ignition (main)
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
189
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
18
40A**
Blower motor
19
40A**
Accessory delay relay - Subwoofer
and 4WD, Low beam
20
60A**
ABS
21
40A**
Horn, CHMSL, Cluster, Power
locks and power seats
22
40A** (I4)
Cooling fan
50A** (V6)
23
40A**
Rear defroster, Park lamps relay
24
40A** (I4)
High/Low speed fan
50A** (V6)
25
Shunt
R2
PCM relay
R3
Fuel pump relay
R4
Cooling fan relay
R5
High/Low speed fan relay 1
R6
Blower motor relay
R7
Starter relay
R8
High/Low speed fan relay 2
R9
Fog lamps relay
R10
A/C relay
D1
Not used
D2
A/C diode
* Mini fuse ** Cartridge fuse
CHANGING A FLAT TIRE
If you get a flat tire while driving:
do not brake heavily.
gradually decrease the vehicle’s speed.
hold the steering wheel firmly.
slowly move to a safe place on the side of the road.
The use of tire sealants may damage your tires.
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
190
AUXILIARY POWER POINT (12VDC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
The auxiliary power point is located
in the floor console. Cigarette lighter
(if equipped) is located in the
instrument panel.
Do not use the power point for
operating the cigarette lighter
element (if equipped).
To prevent the fuse from being
blown, do not use the power
point(s) over the vehicle capacity of
12 VDC/180W.
To prevent the battery from being discharged, do not use the power
point longer than necessary when the engine is not running.
Always keep the power point caps closed when not being used.
Cigar/Cigarette lighter (if equipped)
Do not plug optional electrical accessories into the cigarette lighter
socket.
Do not hold the lighter in with your hand while it is heating, this will
damage the lighter element and socket. The lighter will be released from
its heating position when it is ready to be used.
Improper use of the lighter can cause damage not covered by your
warranty.
POWER WINDOWS
Do not leave children unattended in the vehicle and do not let
children play with the power windows. They may seriously injure
themselves.
When closing the power windows, you should verify they are free
of obstructions and ensure that children and/or pets are not in
the proximity of the window openings.
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
46
Do not attempt to service, repair, or modify the airbag
supplemental restraint systems or its fuses. See your authorized
dealer.
Modifications to the front end of the vehicle, including frame,
bumper, front end body structure, tow hooks and B-pillar
surrounding parts may affect the performance of the airbag sensors
increasing the risk of injury. Do not modify the front end of the
vehicle.
Additional equipment may affect the performance of the airbag
sensors increasing the risk of injury. Please refer to the
Body
Builders Layout Book
for instructions about the appropriate
installation of additional equipment.
Children and airbags
Children must always be properly
restrained. Accident statistics
suggest that children are safer when
properly restrained in the rear
seating positions than in the front
seating position. Failure to follow
these instructions may increase the
risk of injury in a collision.
Airbags can kill or injure a
child in a child seat.
NEVER
place a rear-facing child
seat in front of an active airbag. If
you must use a forward-facing
child seat in the front seat, move
the seat all the way back.
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
105
Do not attempt to service, repair, or modify the airbag SRS, its
fuses or the seat cover on a seat containing an airbag. See an
authorized dealer.
All occupants of the vehicle should always wear their safety belts
even when an airbag SRS is provided.
How does the side airbag system work?
The design and development of the
side airbag system included
recommended testing procedures
that were developed by a group of
automotive safety experts known as
the Side Airbag Technical Working
Group. These recommended testing
procedures help reduce the risk of
injuries related to the deployment of
side airbags.
The side airbag system consists of
the following:
An inflatable nylon bag (airbag)
with a gas generator concealed
behind the outboard bolster of
the driver and front passenger
seatbacks.
A special seat cover designed to allow airbag deployment.
The same warning light, electronic control and diagnostic unit as used
for the front airbags.
Two crash sensors located on the lower portion of the b-pillar (one on
each side of the vehicle).
Side airbags, in combination with safety belts, can help reduce the risk of
severe injuries in the event of a significant side impact collision.
The side airbags are fitted on the outboard side of the seatbacks of the
front seats. In certain lateral collisions, the airbag on the side affected by
the collision will be inflated. If the front passenger sensing system
detects an empty seat, the front passenger seat-mounted side airbag will
be deactivated. The airbag was designed to inflate between the door
panel and occupant to further enhance the protection provided
occupants in side impact collisions.
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
113
Safety Canopy
²
system (if equipped)
Do not place objects or
mount equipment on or
near the headliner at the siderail
that may come into contact with a
deploying Safety Canopy
±
. Failure
to follow these instructions may
increase the risk of personal injury
in the event of a collision.
Do not lean your head on the door. The Safety Canopy
±
could
injure you as it deploys from the headliner.
Do not attempt to service, repair, or modify the Safety Canopy
±
system, its fuses, the A, B, or C pillar trim, or the headliner on a
vehicle containing a Safety Canopy
±
. See your authorized dealer.
All occupants of the vehicle including the driver should always
wear their safety belts even when an airbag SRS and Safety
Canopy
±
system is provided.
To reduce risk of injury, do not obstruct or place objects in the
deployment path of the inflatable Safety Canopy
±
.
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
115
Vehicles with a higher center of gravity such as utility and
four-wheel drive vehicles handle differently than vehicles with a
lower center of gravity. Utility and four-wheel drive vehicles are
not
designed for cornering at speeds as high as passenger cars any more
than low-slung sports cars are designed to perform satisfactorily under
off-road conditions. Avoid sharp turns, excessive speed and abrupt
maneuvers in these vehicles. Failure to drive cautiously could result in
an increased risk of loss of vehicle control, vehicle rollover, personal
injury and death.
Loaded vehicles, with a higher center of gravity, may handle
differently than unloaded vehicles. Extra precautions such as
slower speeds and increased stopping distance should be taken when
driving a heavily loaded vehicle.
AUTOMATIC TRANSMISSION OPERATION
Brake-shift interlock
This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the RUN position unless brake pedal is depressed.
If you cannot move the gearshift lever out of P (Park) with ignition in
the RUN position and the brake pedal depressed, it is possible that a
fuse has blown or the vehicle’s brakelamps are not operating properly.
Refer to
Fuses and relays
in the
Roadside Emergencies
chapter.
If the fuse is not blown, perform the following procedure:
1. Apply the parking brake, turn the ignition to LOCK, then remove the
key.
2. Using a screwdriver or similar
tool, carefully pry out the small,
round, tethered Brake Transmission
Shift Interlock (BTSI) cover cap
located to the right of the gearshift
lever.
P
R
N
D
2
1
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Driving
172
FUEL PUMP SHUT-OFF SWITCH
This device stops the electric fuel pump from sending fuel to the engine
when your vehicle has had a substantial jolt.
After an accident, if the engine cranks but does not start, this switch
may have been activated.
This switch is located in the front
passenger’s footwell, behind a
flip-up cover, by the kick panel
access cover.
To reset the switch:
1. Turn the ignition OFF.
2. Check the fuel system for leaks.
3. If no leaks are apparent, reset the
switch by pushing in on the reset
button.
4. Turn the ignition ON.
5. Wait a few seconds and return
the key to OFF.
6. Make another check for leaks.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
15
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
190
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
70A
Tan
Brown
80A
Natural
Black
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
191
Passenger compartment fuse panel
The fuse panel is located on the
right-hand side of the center
console, by the instrument panel.
Remove the panel cover to access
the fuses.
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
192
The fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
1
15A*
Trailer tow park lamps
2
Not used
3
15A*
Front and rear park lamps
4
10A*
Ignition switch
5
2A*
Powertrain Control Module (PCM
relay), Fuel pump relay, Main fan
relay, High/Low speed fan relay 2,
PATS module
6
15A*
Center High-Mounted Stop Lamp
(CHMSL), Stop lamps, PCM,
Anti-lock Brake System (ABS),
Speed control, Brake On-Off
switch
7
10A*
Instrument cluster, Diagnostic
connector, Power mirror switch,
Radio
8
Not used
9
30A**
Power door locks, Power seats
10
15A*
Heated mirrors
11
15A*
Sunroof, Electrochromatic mirror,
Compass
12
5A*
Radio
13
Not used
14
Not used
15
30A**
Power windows
16
15A*
Subwoofer
17
15A*
Low beams
18
10A*
4WD
19
Not used
20
15A*
Horn
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
193
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
21
10A*
Rear wiper motor, Rear wiper
washer
22
10A*
Instrument cluster
23
Not used
24
20A*
Cigar lighter
25
20A*
Front wiper motor, Front wiper
washer
26
5A*
Climate control system mode
switch
27
5A*
Canister vent, Speed control
cancel switch
28
10A*
Instrument cluster
29
10A*
Reverse park aid
30
Not used
31
Not used
32
10A*
Brake-Transmission shift lock
33
15A*
Air bag module, Passenger Air bag
Deactivation (PAD) indicator
lamp, Occupant Classification
Sensor (OCS)
34
5A*
ABS module, Evac and Fill, Speed
control
35
5A*
Heated seats module, 4WD
* Mini fuse ** Cartridge fuse
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
194
Power distribution box
The power distribution box is
located in the engine compartment.
The power distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
from overloads.
Always disconnect the battery before servicing high current
fuses.
To reduce risk of electrical shock, always replace the cover to
the Power Distribution Box before reconnecting the battery or
refilling fluid reservoirs.
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and Specifications
chapter.
The high-current fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
1
Not used
2
25A*
Headlamp power
3
25A*
High beams, Turn signals, Interior
lamps, Headlamp power
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
195
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
4
5A*
Keep Alive Power (KA PWR)
5
15A*
Heated Exhaust Gas Oxygen
(HEGO) sensors
6
20A*
Fuel pump
7
40A**
RUN/ACC relay -
Electrochromatic mirror, Cigar
lighter, Front and rear wipers,
Compass
8
30A**
Powertrain Control Module
(PCM), Injectors and coil
9
15A*
Alternator
10
30A*
Heated seats
11
10A*
PCM
12
20A*
Power point
13
20A*
Fog lamps
14
15A*
A/C clutch, A/C relay
15
30A*
Anti-lock Brake System (ABS)
solenoid
16
25A*
I/P fuse panel (RUN/START)
17
50A**
Ignition (main)
18
40A**
Blower motor
19
40A**
Accessory delay relay - Subwoofer
and 4WD, Low beam
20
60A**
ABS
21
40A**
Horn, CHMSL, Cluster, Power
locks and power seats
22
40A** (I4)
Cooling fan
50A** (V6)
23
40A**
Rear defroster, Park lamps relay
24
40A** (I4)
High/Low speed fan
50A** (V6)
25
Shunt
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
196
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
R2
PCM relay
R3
Fuel pump relay
R4
Cooling fan relay
R5
High/Low speed fan relay 1
R6
Blower motor relay
R7
Starter relay
R8
High/Low speed fan relay 2
R9
Fog lamps relay
R10
A/C relay
D1
Not used
D2
A/C diode
* Mini fuse ** Cartridge fuse
CHANGING A FLAT TIRE
If you get a flat tire while driving:
do not brake heavily.
gradually decrease the vehicle’s speed.
hold the steering wheel firmly.
slowly move to a safe place on the side of the road.
Your vehicle may be equipped with a conventional spare tire that is
different in one or more of the following: type, brand, size, speed rating
and tread design. If this is the case, this dissimilar spare tire is still rated
for your vehicle loads (GAWR and GVWR). Your vehicle may be equipped
with a spare wheel that may not match the road wheels and is not
equipped with a Tire Pressure Monitor System (TPMS) sensor.
The use of tire sealants may damage your tires. The use of tire
sealants may also damage your Tire Pressure Monitoring System
and should not be used.
Refer to
Tire Pressure Monitoring System (TPMS)
in the
Tire,
Wheels and Loading
chapter for important information. If the
tire pressure monitor sensor becomes damaged, it will no longer
function.
2006 Mariner
(mrn)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
197