Ford Fusion - 2015 Fuse Box Diagram

Ford Fusion - 2015 Fuse Box Diagram

PRINCIPLE OF OPERATION
WARNINGS
Airbags do not inflate slowly or
gently, and the risk of injury from a
deploying airbag is the greatest close
to the trim covering the airbag module.
All occupants of your vehicle,
including the driver, should always
properly wear their safety belts, even
when an airbag supplemental restraint
system is provided. Failure to properly wear
your safety belt could seriously increase
the risk of injury or death.
Always transport children 12 years
old and under in the back seat and
always properly use appropriate
child restraints. Failure to follow this could
seriously increase the risk of injury or death.
Never place your arm over the airbag
module as a deploying airbag can
result in serious arm fractures or
other injuries.
Airbags can kill or injure a child in a
child seat. Never place a rear-facing
child seat in front of an active airbag.
If you must use a forward-facing child seat
in the front seat, move the seat upon which
the child seat is installed all the way back.
Do not attempt to service, repair, or
modify the airbag supplemental
restraint systems or its fuses as you
could be seriously injured or killed. Contact
your authorized dealer as soon as possible.
Several airbag system components
get hot after inflation. To reduce the
risk of injury, do not touch them after
inflation.
If the airbag has deployed, the airbag
will not function again and must be
replaced immediately. If the airbag
is not replaced, the unrepaired area will
increase the risk of injury in a crash.
The airbags are a supplemental restraint
system and are designed to work with the
safety belts to help protect the driver and
right front passenger from certain upper
body injuries. Airbags do not inflate slowly;
there is a risk of injury from a deploying
airbag.
Note:
You will hear a loud bang and see a
cloud of harmless powdery residue if an
airbag deploys. This is normal.
The airbags inflate and deflate rapidly
upon activation. After airbag deployment,
it is normal to notice a smoke-like, powdery
residue or smell the burnt propellant. This
may consist of cornstarch, talcum powder
(to lubricate the bag) or sodium
compounds (for example, baking soda)
that result from the combustion process
that inflates the airbag. Small amounts of
sodium hydroxide may be present which
may irritate the skin and eyes, but none of
the residue is toxic.
While the system is designed to help
reduce serious injuries, contact with a
deploying airbag may also cause abrasions
or swelling. Temporary hearing loss is also
a possibility as a result of the noise
associated with a deploying airbag.
Because airbags must inflate rapidly and
with considerable force, there is the risk of
death or serious injuries such as fractures,
facial and eye injuries or internal injuries,
particularly to occupants who are not
properly restrained or are otherwise out of
position at the time of airbag deployment.
Thus, it is extremely important that
occupants be properly restrained as far
away from the airbag module as possible
while maintaining vehicle control.
Routine maintenance of the airbags is not
required.
36
Fusion/Mondeo (CC7), enUSA
Supplementary Restraints System
Objects lodged underneath the seat
Objects between the seat cushion and
the center console
Objects hanging off the seat back
Objects stowed in the seat back map
pocket
Objects placed on the occupant's lap
Cargo interference with the seat
Other passengers pushing or pulling on
the seat
Rear passenger feet and knees resting
or pushing on the seat
The conditions listed above may cause the
weight of a properly seated occupant to
be incorrectly interpreted by the front
passenger sensing system. The person in
the front passenger seat may appear
heavier or lighter due to the conditions
described in the list above.
Make sure the front passenger
sensing system is operating
properly. See
Crash Sensors
and Airbag Indicator
(page 43).
If the airbag readiness light is lit, do the
following:
The driver and adult passengers should
check for objects lodged underneath the
front passenger seat, or cargo interfering
with the seat.
If there are lodged objects, or cargo is
interfering with the seat, take the following
steps to remove the obstruction:
Pull the vehicle over.
Turn the vehicle off.
Driver and adult passengers should
check for any objects lodged
underneath the front passenger seat
or cargo interfering with the seat.
Remove the obstruction(s) (if found).
Restart the vehicle.
Wait at least two minutes and verify
that the airbag readiness light is no
longer illuminated.
If the airbag readiness light remains
illuminated, this may or may not be a
problem due to the front passenger
sensing system.
Do not attempt to repair or service the
system. Take your vehicle immediately to
an authorized dealer.
If it is necessary to modify an advanced
front airbag system to accommodate a
person with disabilities, contact the Ford
Customer Relationship Center. See
Getting the Services You Need
(page
229).
SIDE AIRBAGS
WARNINGS
Do not place objects or mount
equipment on or near the airbag
cover, on the side of the seatbacks
(of the front seats), or in front seat areas
that may come into contact with a
deploying airbag. Failure to follow these
instructions may increase the risk of
personal injury in the event of a crash.
Do not use accessory seat covers.
The use of accessory seat covers
may prevent the deployment of the
side airbags and increase the risk of injury
in an accident.
Do not lean your head on the door.
The side airbag could injure you as it
deploys from the side of the
seatback.
Do not attempt to service, repair, or
modify the airbag, its fuses or the
seat cover on a seat containing an
airbag as you could be seriously injured or
killed. Contact your authorized dealer as
soon as possible.
40
Fusion/Mondeo (CC7), enUSA
Supplementary Restraints System
WARNINGS
Do not lean your head on the door.
The side curtain airbag could injure
you as it deploys from the headliner.
Do not attempt to service, repair, or
modify the side curtain airbags, its
fuses, the A, B, or C pillar trim, or the
headliner on a vehicle containing side
curtain airbags. Contact your authorized
dealer as soon as possible.
All occupants of the vehicle including
the driver should always wear their
safety belts even when an airbag
supplemental restraint system and side
curtain airbag is provided.
To reduce risk of injury, do not
obstruct or place objects in the
deployment path of the side curtain
airbag.
If the side curtain airbags have
deployed, the side curtain airbags
will not function again. The side
curtain airbags (including the A, B and C
pillar trim and headliner) must be
inspected and serviced by an authorized
dealer. If the side curtain airbag is not
replaced, the unrepaired area will increase
the risk of injury in a crash.
The side curtain airbags will deploy during
significant side crashes. The side curtain
airbags are mounted to the roof side-rail
sheet metal, behind the headliner, above
each row of seats. In certain sideways
crashes, the side curtain airbag on the
impacted side of the vehicle will be
activated. The side curtain airbags are
designed to inflate between the side
window area and occupants to further
enhance protection provided in side impact
crashes.
The system consists of the following:
E75004
Side curtain airbags located above the
trim panels over the front and rear side
windows identified by a label or
wording on the headliner or roof-pillar
trim.
A flexible headliner which opens above
the side doors to allow side air curtain
deployment.
Crash sensors and monitoring
system with readiness indicator.
See
Crash Sensors and Airbag
Indicator
(page 43).
Children 12 years old and under should
always be properly restrained in the back
seats. The side curtain airbags will not
interfere with children restrained using a
properly installed child or booster seat
because it is designed to inflate downward
from the headliner above the doors along
the side window opening.
The design and development of the side
curtain airbags included recommended
testing procedures that were developed
by a group of automotive safety experts
known as the Side Airbag Technical
Working Group. These recommended
testing procedures help reduce the risk of
injuries related to the deployment of side
curtain airbags.
42
Fusion/Mondeo (CC7), enUSA
Supplementary Restraints System
12 Volt DC Power Point
WARNING
Do not plug optional electrical
accessories into the cigar lighter
socket (if equipped). Improper use
of the lighter can cause damage not
covered by your warranty, and can result
in fire or serious injury.
Note:
If used when the vehicle is not
running, the battery will discharge. There
may be insufficient power to restart your
vehicle.
Note:
Do not insert objects other than an
accessory plug into the power point. This
will damage the outlet and blow the fuse.
Note:
Do not hang any type of accessory or
accessory bracket from the plug.
Note:
Do not use the power point over the
vehicle capacity of 12 volt DC 180 watts or
a fuse may blow.
Note:
Do not use the power point for
operating a cigar lighter element.
Note:
Improper use of the power point can
cause damage not covered by your
warranty.
Note:
Always keep the power point caps
closed when not in use.
Run the vehicle for full capacity use of the
power point. To prevent the battery from
discharging accidentally:
Do not use the power point longer than
necessary when the vehicle is not
running.
Do not leave devices plugged in
overnight or when you park your vehicle
for extended periods.
Locations
Power points may be in the following
locations:
in the front of the center console
inside the center console storage bin
on the rear of the center console.
110 Volt AC Power Point
(If Equipped)
WARNING
Do not keep electrical devices
plugged in the power point whenever
the device is not in use. Do not use
any extension cord with the 110 volt AC
power point, since it will defeat the safety
protection design. Doing so my cause the
power point to overload due to powering
multiple devices that can reach beyond
the 150 watt load limit and could result in
fire or serious injury.
Note:
Keep the vehicle running to use the
power point.
E143941
You can use the power point for powering
electrical devices that require up to 150
watts. It is on the rear of the center
console.
When the indicator light, located on the
power point, is:
on
power point is ready to supply
power.
off
power point power supply is off;
ignition is not on.
flashing
power point is in fault mode.
141
Fusion/Mondeo (CC7), enUSA
Auxiliary Power Points
TOWING A TRAILER
WARNINGS
Do not exceed the GVWR or
the GAWR specified on the
certification label.
Towing trailers beyond the
maximum recommended
gross trailer weight exceeds the
limit of your vehicle and could
result in engine damage,
transmission damage, structural
damage, loss of vehicle control,
vehicle rollover and personal
injury.
The electrical system on your
vehicle may have fuses or relays
related to the towing equipment.
See
Fuses
(page 235).
The load capacity of your vehicle
is designated by weight not
volume. You will not necessarily
be able to use all available space
when loading your vehicle or
trailer.
Towing a trailer places extra load
on the engine, transmission, axle,
brakes, tires and suspension.
Inspect these components before,
during and after towing.
Load Placement
To help minimize how trailer
movement affects your vehicle
when driving:
Load the heaviest items closest
to the trailer floor.
Load the heaviest items
centered between the left and
right side trailer tires.
Load the heaviest items above
the trailer axles or just slightly
forward toward the trailer
tongue. Do not allow the final
trailer tongue weight to go
above 15% or below 10% of the
loaded trailer weight.
Select a tow bar with the
correct rise or drop. When both
the loaded vehicle and trailer
are connected, the trailer frame
should be level, or slightly
angled down toward your
vehicle, when viewed from the
side.
Note:
A slight vibration or shudder
may be present when you start to
drive away due to increased
payload weight.
Information on correct trailer
loading and preparing your vehicle
is available in the load carrying
section. See
Load Limit
(page
207). Further information is
available in the RV and Trailer
Towing Guide. See an authorized
dealer.
215
Fusion/Mondeo (CC7), enUSA
Towing
FUSE SPECIFICATION CHART
Power Distribution Box
WARNINGS
Always disconnect the battery before
servicing high-current fuses.
To reduce risk of electrical shock,
always replace the cover to the
power distribution box before
reconnecting the battery or refilling fluid
reservoirs.
The power distribution box is located in
the engine compartment. It has
high-current fuses that protect your
vehicle's main electrical systems from
overloads.
If the battery has been disconnected and
reconnected, some features will need to
be reset. See
Changing the 12V Battery
(page 255).
E144783
Protected components
Fuse amp rating
Fuse or relay number
Moonroof 1.
30A
3
1
Starter relay.
-
2
Autowipers.
15A
1
3
235
Fusion/Mondeo (CC7), enUSA
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Blower motor relay.
4
Power point 3 - Back of console.
20A
3
5
Not used.
6
Powertrain control module - vehicle power
1.
20A
1
7
Powertrain control module - vehicle power
2.
20A
1
8
Powertrain control module relay.
9
Power point 1 - driver front.
20A
3
10
Powertrain control module - vehicle power
4.
15A
2
11
Powertrain control module - vehicle power
3.
15A
2
12
Powertrain control module - vehicle power
5.
10A
2
13
Powertrain control module - vehicle power
6.
10A
2
14
Run-start relay.
15
Power point 2 - console.
20A
3
16
Not used (spare).
20A
3
17
Not used (spare).
20A
1
18
Run-start electronic power assist steering.
10A
1
19
Run/start lighting.
10A
1
20
Run/start transmission control.
15A
1
21
Transmission oil pump start/stop.
Air conditioner clutch solenoid.
10A
1
22
Run-start.
15A
1
23
Blind spot information system.
Rear view camera.
236
Fusion/Mondeo (CC7), enUSA
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Adaptive cruise control.
Heads-up display.
Voltage stability module.
Run-start 7.
10A
1
24
Run-start anti-lock brake system.
10A
2
25
Run-start powertrain control module.
10A
2
26
Not used (spare).
10A
1
27
Not used (spare).
10A
1
28
Mass air flow monitor.
5A
1
29
Not used.
30
Not used.
31
Electronic fan 1 relay.
32
A/C clutch relay.
33
Not used.
15A
1
34
Not used.
35
Not used.
36
Not used.
10A
1
37
Electronic fan 2 relay
38
Not used.
39
Electronic fan coil 2 and 3 relay.
40
Horn relay.
41
Fuel pump coil relay.
42
Not used.
10A
1
43
Not used (spare).
20A
1
44
Not used.
45
237
Fusion/Mondeo (CC7), enUSA
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Not used.
46
Not used.
47
Not used.
48
Keep alive power.
10A
1
49
Horn.
20A
1
50
Not used.
51
Not used.
52
Power seats.
10A
1
53
Brake on off switch.
10A
2
54
ALT sensor.
10A
2
55
1
Micro fuse.
2
Dual micro fuse.
3
M-type fuse.
Power Distribution Box - Bottom
There are fuses located on the bottom of
the fuse box. To access the bottom of the
fuse box, do the following:
238
Fusion/Mondeo (CC7), enUSA
Fuses
E145983
1.
Release the two latches, located on
both sides of the fuse box.
2.
Raise the inboard side of the fuse box
from the cradle.
3.
Move the fuse box toward the center
of the engine compartment.
4.
Pivot the outboard side of the fuse box
to access the bottom side.
239
Fusion/Mondeo (CC7), enUSA
Fuses
E144949
Protected components
Fuse amp rating
Fuse or relay number
Not used.
56
Diesel vaporizer or E100.
30A
1
57
Fuel pump feed.
30A
1
58
500W Electronic fan 3.
30A
2
59
500W Electronic fan 1.
30A
2
60
Not used.
61
Body control module 1.
50A
2
62
500W Electronic fan 2.
20A
1
63
Not used (spare).
30A
1
64
Front heated seat.
20A
1
65
240
Fusion/Mondeo (CC7), enUSA
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Not used.
66
Body control module 2.
50A
2
67
Heated rear window.
40A
1
68
Anti-lock brake system valves.
30A
1
69
Passenger seat.
30A
1
70
Active front steering.
50A
2
71
Trans oil pump.
20A
1
72
Rear heated seats.
20A
1
73
Driver seat module.
30A
1
74
Wiper motor 1.
25A
1
75
Power lift-gate module.
30A
1
76
Climate control seat module.
30A
1
77
Not used (spare).
40A
1
78
Blower motor.
40A
2
79
Wiper motor 2.
25A
1
80
110 volt inverter.
40A
1
81
Not used.
82
TRCM shifter.
25A
1
83
Starter solenoid.
30A
1
84
Moonroof 2.
30A
1
85
241
Fusion/Mondeo (CC7), enUSA
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Not used.
86
Anti-lock brake system pump.
60A
2
87
1
M-type fuse.
2
J-type fuse.
Passenger Compartment Fuse
Panel
The fuse panel is located under the
instrument panel to the left of the steering
column.
Note:
It may be easier to access the fuse
panel if you remove the finish trim piece.
E145984
242
Fusion/Mondeo (CC7), enUSA
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Lighting (ambient, glove box, vanity, dome,
trunk).
10A
1
1
Memory seats, lumbar, power mirror.
7.5A
1
2
Driver door unlock.
20A
1
3
Not used (spare).
5A
1
4
Subwoofer amplifier.
20A
1
5
Heated seat relay coil.
10A
2
6
Not used (spare).
10A
2
7
Not used (spare).
10A
2
8
Not used (spare).
10A
2
9
Keypad.
5A
2
10
Power decklid module.
Not used.
5A
2
11
Climate control.
7.5A
2
12
Steering wheel column lock.
7.5A
2
13
Cluster.
Datelink logic.
Not used.
10A
2
14
Datalink gateway module.
10A
2
15
Child lock.
15A
1
16
Decklid-liftglass release.
Not used (spare).
5A
2
17
Ignition.
5A
2
18
Push button stop start switch.
Passenger airbag disabled indicator.
5A
2
19
Transmission range
243
Fusion/Mondeo (CC7), enUSA
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Not used (spare).
5A
2
20
Humidity and in
car temperature sensor.
5A
2
21
Blind spot information system.
Rear video camera.
Adaptive cruise control.
Occupant classification sensor.
5A
2
22
Delayed accessory (power inverter logic,
moonroof logic).
10A
1
23
Central lock unlock.
20A
1
24
Driver door (window, mirror).
30A
1
25
Front passenger door (window, mirror).
30A
1
26
Moonroof.
30A
1
27
Amplifier.
20A
1
28
Rear driver side door (window).
30A
1
29
Rear passenger side door (window).
30A
1
30
Spare.
31
Global positioning system.
10A
1
32
Display.
Voice control.
Adaptive cruise control.
Radio frequency receiver.
Radio.
20A
1
33
Run-start bus (fuse 19, 20, 21, 22, 35, 36,
37, circuit breaker).
30A
1
34
Restraints control module.
5A
1
35
Auto-dimming rear view mirror.
15A
1
36
Heated seat.
All-wheel drive.
244
Fusion/Mondeo (CC7), enUSA
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Voltage stability module logic power.
15A
1
37
Not used (spare).
30A
38
1
Micro fuse.
2
Dual micro fuse.
CHANGING A FUSE
Fuses
WARNING
Always replace a fuse with one that
has the specified amperage rating.
Using a fuse with a higher amperage
rating can cause severe wire damage and
could start a fire.
E142430
If electrical components in the vehicle are
not working, a fuse may have blown. A
break in the fuse wire will indicate a blown
fuse. Check the appropriate fuses before
replacing any electrical components.
245
Fusion/Mondeo (CC7), enUSA
Fuses