Ford F-59 Commercial Stripped Chassis - 2014 Fuse Box Diagram

Ford F-59 Commercial Stripped Chassis - 2014 Fuse Box Diagram

1 (First)
Provides maximum engine braking
Allows upshifts by moving gearshift
lever
The transmission will not downshift
into 1 (First) at high speeds; it will
downshift to a lower gear and then
shift into 1 (First) when the vehicle
reaches slower speeds.
Forced downshifts
Allowed in D (Overdrive) with the
tow/haul feature on or off
Press the accelerator to the floor
Allows transmission to select an
appropriate gear
Brake-Shift Interlock
WARNINGS
Do not drive your vehicle until you
verify that the brake lamps are
working.
If your brake lamps are not working
properly or if you have disconnected
the vehicle battery cables, the
vehicle brake lamps and hazard flashers
may not properly warn traffic of a vehicle
breakdown or approaching danger, which
can increase the risk of serious injury or
death. To minimize the risk of serious injury
or death, be aware of your surroundings,
use other hazard signaling devices if
available, and move the vehicle to a safe
location away from traffic as soon as
possible.
When doing this procedure, you will
be taking the vehicle out of park
which means the vehicle can roll
freely. To avoid unwanted vehicle
movement, always fully set the parking
brake prior to doing this procedure. Use
wheel chocks if appropriate.
WARNINGS
If the parking brake is fully released,
but the brake warning lamp remains
illuminated, the brakes may not be
working properly. See your authorized
dealer.
Your vehicle is equipped with a brake-shift
interlock feature that prevents the
gearshift lever from being moved from P
(Park) unless the brake pedal is pressed.
If you cannot move the gearshift lever out
of P (Park) position with the ignition in the
4 (on) position and the brake pedal
pressed, a malfunction may have occurred.
It is possible that a fuse has blown or the
vehicle
s brake lamps are not operating
properly. Refer to Fuses and relays in the
Roadside Emergencies chapter. If the fuses
and brake lamps are working properly, and
the vehicle still will not shift out of (P)
Park, see your authorized dealer for service.
In an emergency, to disable the
malfunctioning brake-shift interlock
feature in order to shift the vehicle from P
(Park) follow these steps:
1.
Apply the parking brake. Turn key to
the lock position, and then remove the
key.
2.
Disconnect the negative (black)
battery cable from the battery.
3.
Insert the key and turn to the off
position. Shift to N (Neutral).
4.
Reconnect the negative (black) battery
cable to the battery.
5.
Start the vehicle.
Note:
See your authorized dealer as soon
as possible if this procedure is used.
31
Motorhome (TY3)
Transmission
TOWING A TRAILER
WARNINGS
Do not exceed the GVWR or
the GAWR specified on the
certification label.
Towing trailers beyond the
maximum recommended
gross trailer weight exceeds the
limit of the vehicle and could
result in engine damage,
transmission damage, structural
damage, loss of vehicle control,
vehicle rollover and personal
injury.
Your vehicle may have electrical
items, such as fuses or relays,
related to towing. See the Fuses
chapter.
Your vehicle's load capacity
designation is by weight, not by
volume, so you cannot necessarily
use all available space when
loading a vehicle.
Towing a trailer places an extra
load on your vehicle's engine,
transmission, axle, brakes, tires
and suspension. Inspect these
components periodically during,
and after, any towing operation.
Load Placement
To help minimize how trailer
movement affects your vehicle
when driving:
Load the heaviest items closest
to the trailer floor.
Load the heaviest items
centered between the left and
right side trailer tires.
Load the heaviest items above
the trailer axles or just slightly
forward toward the trailer
tongue. Do not allow the final
trailer tongue weight to go
above or below 10-15% of the
loaded trailer weight.
Select a tow bar with the
correct rise or drop. When both
the loaded vehicle and trailer
are connected, the trailer frame
should be level, or slightly
angled down toward your
vehicle, when viewed from the
side.
When driving with a trailer or
payload, a slight takeoff vibration
or shudder may be present due to
the increased payload weight.
Additional information regarding
proper trailer loading and setting
your vehicle up for towing is
located in another chapter of this
manual. See
Load Limit
(page
36). You can also find the
information in the
RV & Trailer
Towing Guide
, available at an
authorized dealer.
42
Motorhome (TY3)
Towing
CHANGING A FUSE
Fuses
WARNING
Always replace a fuse with one that
has the specified amperage rating.
Using a fuse with a higher amperage
rating can cause severe wire damage and
could start a fire.
E142430
If electrical components in the vehicle are
not working, a fuse may have blown. Blown
fuses are identified by a broken wire within
the fuse. Check the appropriate fuses
before replacing any electrical
components.
Standard Fuse Amperage Rating and Color
Color
Fuse link
cartridge
Cartridge
maxi fuses
Maxi fuses
Standard
fuses
Mini fuses
Fuse rating
-
-
-
Grey
Grey
2A
-
-
-
Violet
Violet
3A
-
-
-
Pink
Pink
4A
-
-
-
Tan
Tan
5A
-
-
-
Brown
Brown
7.5A
-
-
-
Red
Red
10A
-
-
-
Blue
Blue
15A
Blue
Blue
Yellow
Yellow
Yellow
20A
Natural
Natural
-
Natural
Natural
25A
Pink
Pink
Green
Green
Green
30A
Green
Green
Orange
-
-
40A
Red
Red
Red
-
-
50A
Yellow
Yellow
Blue
-
-
60A
Brown
-
Tan
-
-
70A
Black
Black
Natural
-
-
80A
60
Motorhome (TY3)
Fuses
FUSE SPECIFICATION CHART
Power Distribution Box
WARNINGS
Always disconnect the battery before
servicing high current fuses.
To reduce risk of electrical shock,
always replace the cover to the
power distribution box before
reconnecting the battery or refilling fluid
reservoirs.
The power distribution box is located in
the engine compartment. It has
high-current fuses that protect your
vehicle's main electrical systems from
overloads.
If the battery has been disconnected and
reconnected, you will need to reset some
features. See
Changing the 12V Battery
(page 80).
E161519
61
Motorhome (TY3)
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Power brake assist module
Hydromax
5A*
1
Air conditioning compressor clutch
10A*
2
Air conditioning clutch relay coil, Mass air
flow sensor with intake air temperature,
Vapor management valve, Engine heated
exhaust gas oxygen sensor #11 and #21,
Catalyst monitor sensor
20A*
3
Powertrain control module memory,
Powertrain control module relay coil
5A*
4
Powertrain control module power
20A*
5
Park lamp feeds, Instrument panel fuse
#41, Trailer tow running lamp relay coil,
Instrument panel dimmer module
20A*
6
Ignition coils, Radio capacitors
20A*
7
Hydromax
Anti-lock brake system
module
30A*
8
Starter main relay coil, Starter ground relay
coil, Powertrain control module
10A*
9
Daytime running lamps
20A*
10
Fuel pump relay coil, Powertrain control
module power
20A*
11
Trailer tow back-up lamps feed, Instrument
panel - backup lamp feed
25A*
12
Trailer tow electric brake controller feed
30A**
13
Instrument panel battery feed (fuse #9, 15,
21)
60A**
14
Trailer tow park lamps
20A**
15
Anti-lock brake system module
Hydromax
60A**
16
Anti-lock brake system module
Hydro-
boost
40A**
Horn feed
20A**
17
62
Motorhome (TY3)
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Transmission control indicator light, Tow/
haul switch, Backup lamp feed
20A**
18
Not used
19
Powertrain control module relay coil,
Powertrain control module relay (Power
distribution box fuses # 3, 5, 7, 18)
30A**
20
Fuel pump motor, Fuel injectors
20A**
21
Diagnostic tool connector, Cigar lighter
feed
20A**
22
Blower motor feed
40A**
23
Instrument panel battery feed (fuses #4,
10, 16, 22)
50A**
24
Ignition switch feed (Instrument panel
fuses #1, 5, 7, 11, 13, 14, 17, 19, 23; Power
distribution box fuses #9, 11)
40A**
25
Ignition switch feed (Instrument panel
fuses #5, 11, 17, 23, 26, 38)
40A**
26
Multi-function switch (headlamps)
30A**
27
Starter solenoid
30A**
28
Power brake assist motor
Hydromax
60A**
29
Anti-lock brake system module
Hydro-
boost
40A**
Air conditioning clutch relay
R1
Fuel pump relay
R2
Horn relay
R3
Starter relay
R4
Blower motor relay
R5
Powertrain control module relay
R6
63
Motorhome (TY3)
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Fuel pump diode
Diode 1
Air conditioning clutch diode
Diode 2
*Mini fuses
**Maxi fuses
Diode and Relay Module
The module box is located by the power
distribution box in front of the radiator.
E161520
Protected components
Relay location
One-touch integrated start (ATO diode)
1
Not used
2
Not used
3
Daytime running lamps power relay
4
Hydromax
brake on/off signal isolating relay
5
Reverse lamps relay
6
Starter ground relay
7
Trailer tow parking lamps relay
8
Fuse Holder Module
The fuse holder module is located next to
the diode/relay module.
64
Motorhome (TY3)
Fuses
Protected components
Fuse amp rating
Fuse number
Hydromax
brake on/off signal
10A
1
Passenger Compartment Fuse
Panel
The fuse panel is located below and to the
left of the steering wheel by the brake
pedal. Remove the panel cover to access
the fuses.
To remove a fuse use the fuse puller tool
provided on the fuse panel cover.
E161521
Protected components
Fuse amp rating
Fuse or relay number
Turn/stop lamps, Turn indicators, Body
builder rear turn/stop feeds
20A
1
Not used
2
Not used
3
65
Motorhome (TY3)
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Instrument panel cluster
10A
4
Body builder accessory feed (accessory
and run)
10A
5
Not used
6
Blower motor relay coil
15A
7
Brake lamps feed
10A
8
Stop lamps: Vehicle turn/stop lamps, Body
builder rear turn/stop feeds, Body builder
stop lamp feed
20A
9
Instrument cluster memory
10A
10
Wiper/washer module, Wiper feed
30A
11
Not used
12
Anti-lock brake system module
Hydromax
10A
13
Warning chime module, Instrument cluster
power, Instrument cluster warning lamps,
Anti-lock brake system module
Hydro-
boost
10A
14
Left turn signal feed
15A
15
Body builder battery (+12V) feed
20A
16
Body builder radio feed
5A
17
Not used
18
Daytime running lamps relays
5A
19
Not used
20
Right turn signal feed
15A
21
Trailer tow turn signals
20A
22
Cluster run/accessory
10A
23
Not used
24
Body builder right-hand low beam head-
lamp feed
10A
25
66
Motorhome (TY3)
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Brake shift interlock actuator
10A
26
Not used
27
Not used
28
Not used
29
Not used
30
Body builder left-hand low beam head-
lamp feed
10A
31
Not used
32
Reverse lamps
10A
33
Trailer tow reverse lamps, Body builder
reverse gear
10A
34
Body builder high beam feed, High beam
indicator
20A
35
Not used
36
Not used
37
Body builder run feed
10A
38
Not used
39
Not used
40
Instrument illumination
10A
41
Not used
42
Not used
43
Not used
44
Trailer tow right turn signal
Relay 1
Trailer tow left turn signal
Relay 2
Right turn signal
Relay 3
Left turn signal
Relay 4
Not used
Relay 5
Daytime running lamps, Parking brake
Relay 6
67
Motorhome (TY3)
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Daytime running lamps on/off
Relay 7
Brake transmission shift interlock
Diode 1
Brake transmission shift interlock
Diode 2
Not used
F1
Not used
F2
Not used
F3
Brake transmission shift interlock
10A
F4
Not used
F5
Not used
F6
Not used
F7
Not used
F8
Not used
F9
Not used
F10
Not used
F11
Not used
F12
68
Motorhome (TY3)
Fuses
1 (First)
Provides maximum engine braking
Allows upshifts by moving gearshift
lever
The transmission will not downshift
into 1 (First) at high speeds; it will
downshift to a lower gear and then
shift into 1 (First) when the vehicle
reaches slower speeds.
Forced downshifts
Allowed in D (Overdrive) with the
tow/haul feature on or off
Press the accelerator to the floor
Allows transmission to select an
appropriate gear
Brake-Shift Interlock
WARNINGS
Do not drive your vehicle until you
verify that the brake lamps are
working.
If your brake lamps are not working
properly or if you have disconnected
the vehicle battery cables, the
vehicle brake lamps and hazard flashers
may not properly warn traffic of a vehicle
breakdown or approaching danger, which
can increase the risk of serious injury or
death. To minimize the risk of serious injury
or death, be aware of your surroundings,
use other hazard signaling devices if
available, and move the vehicle to a safe
location away from traffic as soon as
possible.
When doing this procedure, you will
be taking the vehicle out of park
which means the vehicle can roll
freely. To avoid unwanted vehicle
movement, always fully set the parking
brake prior to doing this procedure. Use
wheel chocks if appropriate.
WARNINGS
If the parking brake is fully released,
but the brake warning lamp remains
illuminated, the brakes may not be
working properly. See your authorized
dealer.
Your vehicle is equipped with a brake-shift
interlock feature that prevents the
gearshift lever from being moved from P
(Park) unless the brake pedal is pressed.
If you cannot move the gearshift lever out
of P (Park) position with the ignition in the
4 (on) position and the brake pedal
pressed, a malfunction may have occurred.
It is possible that a fuse has blown or the
vehicle
s brake lamps are not operating
properly. Refer to Fuses and relays in the
Roadside Emergencies chapter. If the fuses
and brake lamps are working properly, and
the vehicle still will not shift out of (P)
Park, see your authorized dealer for service.
In an emergency, to disable the
malfunctioning brake-shift interlock
feature in order to shift the vehicle from P
(Park) follow these steps:
1.
Apply the parking brake. Turn key to
the lock position, and then remove the
key.
2.
Disconnect the negative (black)
battery cable from the battery.
3.
Insert the key and turn to the off
position. Shift to N (Neutral).
4.
Reconnect the negative (black) battery
cable to the battery.
5.
Start the vehicle.
Note:
See your authorized dealer as soon
as possible if this procedure is used.
31
Motorhome (TY3)
Transmission
TOWING A TRAILER
WARNINGS
Do not exceed the GVWR or
the GAWR specified on the
certification label.
Towing trailers beyond the
maximum recommended
gross trailer weight exceeds the
limit of the vehicle and could
result in engine damage,
transmission damage, structural
damage, loss of vehicle control,
vehicle rollover and personal
injury.
Your vehicle may have electrical
items, such as fuses or relays,
related to towing. See the
Fuses
chapter.
Your vehicle's load capacity
designation is by weight, not by
volume, so you cannot necessarily
use all available space when
loading a vehicle.
Towing a trailer places an extra
load on your vehicle's engine,
transmission, axle, brakes, tires
and suspension. Inspect these
components periodically during,
and after, any towing operation.
Load Placement
To help minimize how trailer
movement affects your vehicle
when driving:
Load the heaviest items closest
to the trailer floor.
Load the heaviest items
centered between the left and
right side trailer tires.
Load the heaviest items above
the trailer axles or just slightly
forward toward the trailer
tongue. Do not allow the final
trailer tongue weight to go
above or below 10-15% of the
loaded trailer weight.
Select a tow bar with the
correct rise or drop. When both
the loaded vehicle and trailer
are connected, the trailer frame
should be level, or slightly
angled down toward your
vehicle, when viewed from the
side.
When driving with a trailer or
payload, a slight takeoff vibration
or shudder may be present due to
the increased payload weight.
Additional information regarding
proper trailer loading and setting
your vehicle up for towing is
located in another chapter of this
manual. See
Load Limit
(page
36). You can also find the
information in the
RV & Trailer
Towing Guide
, available at an
authorized dealer.
42
Motorhome (TY3)
Towing
CHANGING A FUSE
Fuses
WARNING
Always replace a fuse with one that
has the specified amperage rating.
Using a fuse with a higher amperage
rating can cause severe wire damage and
could start a fire.
E142430
If electrical components in the vehicle are
not working, a fuse may have blown. Blown
fuses are identified by a broken wire within
the fuse. Check the appropriate fuses
before replacing any electrical
components.
Standard Fuse Amperage Rating and Color
Color
Fuse link
cartridge
Cartridge
maxi fuses
Maxi fuses
Standard
fuses
Mini fuses
Fuse rating
-
-
-
Grey
Grey
2A
-
-
-
Violet
Violet
3A
-
-
-
Pink
Pink
4A
-
-
-
Tan
Tan
5A
-
-
-
Brown
Brown
7.5A
-
-
-
Red
Red
10A
-
-
-
Blue
Blue
15A
Blue
Blue
Yellow
Yellow
Yellow
20A
Natural
Natural
-
Natural
Natural
25A
Pink
Pink
Green
Green
Green
30A
Green
Green
Orange
-
-
40A
Red
Red
Red
-
-
50A
Yellow
Yellow
Blue
-
-
60A
Brown
-
Tan
-
-
70A
Black
Black
Natural
-
-
80A
60
Motorhome (TY3)
Fuses
FUSE SPECIFICATION CHART
Power Distribution Box
WARNINGS
Always disconnect the battery before
servicing high current fuses.
To reduce risk of electrical shock,
always replace the cover to the
power distribution box before
reconnecting the battery or refilling fluid
reservoirs.
The power distribution box is located in
the engine compartment. It has
high-current fuses that protect your
vehicle's main electrical systems from
overloads.
If the battery has been disconnected and
reconnected, you will need to reset some
features. See
Changing the 12V Battery
(page 83).
E161519
Protected components
Fuse amp rating
Fuse or relay number
Power brake assist module
Hydromax
5A*
1
Air conditioning compressor clutch
10A*
2
Air conditioning clutch relay coil
20A*
3
Catalyst monitor sensor
61
Motorhome (TY3)
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Engine heated exhaust gas oxygen sensor
#11 and #21
Mass air flow sensor with intake air
temperature
Vapor management valve
Powertrain control module memory
5A*
4
Powertrain control module relay coil
Powertrain control module power
20A*
5
Instrument panel dimmer module
20A*
6
Instrument panel fuse #41
Park lamp feeds
Trailer tow running lamp relay coil
Ignition coils
20A*
7
Radio capacitors
Hydromax
Anti-lock brake system
module
30A*
8
Powertrain control module
10A*
9
Starter ground relay coil
Starter main relay coil
Daytime running lamps
20A*
10
Fuel pump relay coil
20A*
11
Powertrain control module power
Instrument panel - backup lamp feed
25A*
12
Trailer tow back-up lamps feed
Trailer tow electric brake controller feed
30A**
13
Instrument panel battery feed (fuse #9, 15,
21)
60A**
14
Trailer tow park lamps
20A**
15
Anti-lock brake system module
Hydromax
60A**
16
Anti-lock brake system module
Hydro-
boost
40A**
Horn feed
20A**
17
Backup lamp feed
20A**
18
62
Motorhome (TY3)
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Tow/haul switch
Transmission control indicator light
Not used
19
Powertrain control module relay coil
30A**
20
Powertrain control module relay (Power
distribution box fuses # 3, 5, 7, 18)
Fuel injectors
20A**
21
Fuel pump motor
Cigar lighter feed
20A**
22
Diagnostic tool connector
Blower motor feed
40A**
23
Instrument panel battery feed (fuses #4,
10, 16, 22)
50A**
24
Ignition switch feed (Instrument panel
fuses #1, 5, 7, 11, 13, 14, 17, 19, 23; Power
distribution box fuses #9, 11)
40A**
25
Ignition switch feed (Instrument panel
fuses #5, 11, 17, 23, 26, 38)
40A**
26
Multi-function switch (headlamps)
30A**
27
Starter solenoid
30A**
28
Power brake assist motor
Hydromax
60A**
29
Anti-lock brake system module
Hydro-
boost
40A**
Air conditioning clutch relay
R1
Fuel pump relay
R2
Horn relay
R3
Starter relay
R4
Blower motor relay
R5
Powertrain control module relay
R6
63
Motorhome (TY3)
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Fuel pump diode
Diode 1
Air conditioning clutch diode
Diode 2
*Mini fuses
**Maxi fuses
UPS Power Distribution Box 1
E172543
Protected components
Fuse amp rating
Fuse or relay number
Powertrain control module
Relay
R1
Daytime running lamps
Relay
R2
Starter motor
Relay
R3
Blower motor
Relay
R4
Horn
Relay
R5
Fuel pump
Relay
R6
Starter ground
Relay
R7
Trailer tow parking lamps
Relay
R8
Back-up lamps
Relay
R9
Not used
Relay
R10
Not used
Relay
R11
Air conditioning
Relay
R12
64
Motorhome (TY3)
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Hydromax brake on/off relay
10A
M1-1
Not used
M1-2
Not used
M1-3
Not used
M1-4
UPS Power Distribution Box 2
E172544
Protected components
Fuse amp rating
Fuse or relay number
Back-up lamps
25A*
M1
Daytime running lamps
20A*
M2
4
channel anti-lock brake system module
(Hydromax)
30A*
M3
Powertrain control module run/start relay
20A*
M4
Starter relay coil
10A*
M5
Vehicle power 4
20A*
M6
Hydromax motor monitor
5A*
M7
Vehicle power 2
20A*
M8
Vehicle power 1
20A*
M9
Air conditioning
10A*
M10
Powertrain control module relay keep alive
power
5A*
M11
65
Motorhome (TY3)
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Parking lamps
20A*
M12
One-touch start
Diode
D1
Fuel pump
Diode
D2
Air conditioning
Diode
D3
Not used
R2-1
Powertrain control module vehicle power
30A**
J1
Fuel pump
20A**
J2
Cigar lighter power point
20A**
J3
Diagnostic connector
Blower motor
40A**
J4
Headlamps
30A**
J5
Ignition switch feeds
40A**
J6
Ignition switch feeds
40A**
J7
Instrument panel fuse box
50A**
J8
Starter motor solenoid
30A**
J9
3
channel anti-lock brake system module
40A**
J10
4
channel anti-lock brake system module
(Hydromax)
60A**
Trailer tow electronic brake
30A**
J11
Lighting
60A**
J12
Vehicle power 3
20A**
J13
Horn
20A**
J14
3
channel anti-lock brake system module
40A**
J15
4
channel anti-lock brake system module
60A**
Trailer tow parking lamps
20A**
J16
*
Mini fuse
**
J-case fuse
66
Motorhome (TY3)
Fuses
Diode and Relay Module
The module box is located by the power
distribution box in front of the radiator.
E161520
Protected components
Relay location
One-touch integrated start (ATO diode)
1
Not used
2
Not used
3
Daytime running lamps power relay
4
Hydromax
brake on/off signal isolating relay
5
Reverse lamps relay
6
Starter ground relay
7
Trailer tow parking lamps relay
8
Fuse Holder Module
The fuse holder module is located next to
the diode and relay module.
Protected components
Fuse amp rating
Fuse number
Hydromax
brake on/off signal
10A
1
67
Motorhome (TY3)
Fuses
Passenger Compartment Fuse
Panel
The fuse panel is located below and to the
left of the steering wheel by the brake
pedal. Remove the panel cover to access
the fuses.
To remove a fuse use the fuse puller tool
provided on the fuse panel cover.
E161521
Protected components
Fuse amp rating
Fuse or relay number
Body builder rear direction indicator and
stop lamp feeds
20A
1
Direction indicators
Direction indicators and stop lamps
Not used
2
Not used
3
Instrument cluster
10A
4
Body builder accessory feed (accessory
and run)
10A
5
Not used
6
68
Motorhome (TY3)
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Blower motor relay coil
15A
7
Brake lamps feed
10A
8
Stop lamps: Vehicle direction indicators
and stop lamps, Body builder rear direction
indicators and stop feeds, Body builder
stop lamp feed
20A
9
Instrument cluster memory
10A
10
Wiper/washer module
30A
11
Wiper feed
Not used
12
Anti-lock brake system module
Hydromax
10A
13
Anti-lock brake system module
Hydro-
boost
10A
14
Instrument cluster power
Instrument cluster warning lamps
Warning indicator module
Left-hand direction indicator feed
15A
15
Body builder battery (+12V) feed
20A
16
Body builder radio feed
5A
17
Not used
18
Daytime running lamps relays
5A
19
Not used
20
Right-hand direction indicator feed
15A
21
Trailer tow direction indicators
20A
22
Cluster run/accessory
10A
23
Not used
24
Body builder right-hand low beam head-
lamp feed
10A
25
Brake shift interlock actuator
10A
26
Not used
27
69
Motorhome (TY3)
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Not used
28
Not used
29
Not used
30
Body builder left-hand low beam head-
lamp feed
10A
31
Not used
32
Reverse lamps
10A
33
Body builder reverse gear
10A
34
Trailer tow reverse lamps
Body builder high beam feed
20A
35
High beam indicator
Not used
36
Not used
37
Body builder run feed
10A
38
Not used
39
Not used
40
Instrument cluster lighting
10A
41
Not used
42
Not used
43
Not used
44
Trailer tow right-hand direction indicator
Relay 1
Trailer tow left-hand direction indicator
Relay 2
Right-hand direction indicator
Relay 3
Left-hand direction indicator
Relay 4
Not used
Relay 5
Daytime running lamps
Relay 6
Parking brake
Daytime running lamps on/off
Relay 7
70
Motorhome (TY3)
Fuses
Protected components
Fuse amp rating
Fuse or relay number
Brake transmission shift interlock
Diode 1
Brake transmission shift interlock
Diode 2
Not used
F1
Not used
F2
Not used
F3
Brake transmission shift interlock
10A
F4
Not used
F5
Not used
F6
Not used
F7
Not used
F8
Not used
F9
Not used
F10
Not used
F11
Not used
F12
71
Motorhome (TY3)
Fuses