Ford Explorer - 2007 Fuse Box Diagram

Ford Explorer - 2007 Fuse Box Diagram

Rear center console features (if equipped)
The rear center console incorporates the following features:
Utility compartment
Cupholders
Flip forward armrest to provide a
flat load floor
AUXILIARY POWER POINT (12VDC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
The auxiliary power point is located
in the floor console.
Do not use the power point for
operating the cigarette lighter
element (if equipped).
To prevent the fuse from being
blown, do not use the power
point(s) over the vehicle capacity of
12 VDC/180W.
To prevent the battery from being
discharged, do not use the power point longer than necessary when the
engine is not running.
Always keep the power point caps closed when not being used.
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
67
Do not attempt to service, repair, or modify the airbag
supplemental restraint systems or its fuses. See your authorized
dealer.
Modifications to the front end of the vehicle, including frame,
bumper, front end body structure and non-Ford tow hooks may
effect the performance of the airbag sensors increasing the risk of
injury. Do not modify the front end of the vehicle with anything other
than authorized Ford accessories for your vehicle.
Additional equipment may affect the performance of the airbag
sensors increasing the risk of injury. Please refer to the
Body
Builders Layout Book
for instructions about the appropriate
installation of additional equipment.
Children and airbags
Children must always be properly
restrained. Accident statistics
suggest that children are safer when
properly restrained in the rear
seating positions than in the front
seating position. Failure to follow
these instructions may increase the
risk of injury in a collision.
Airbags can kill or injure a
child in a child seat.
NEVER
place a rear-facing child
seat in front of an active airbag. If
you must use a forward-facing
child seat in the front seat, move
the seat all the way back.
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
156
Do not attempt to service, repair, or modify the airbag SRS, its
fuses or the seat cover on a seat containing an airbag. See your
authorized dealer.
All occupants of the vehicle should always wear their safety belts
even when an airbag SRS is provided.
How does the side airbag system work?
The design and development of the side airbag system included
recommended testing procedures that were developed by a group of
automotive safety experts known as the Side Airbag Technical Working
Group. These recommended testing procedures help reduce the risk of
injuries related to the deployment of side airbags.
The side airbag system consists of
the following:
An inflatable nylon bag (airbag)
with an inflator concealed behind
the outboard bolster of the driver
and front passenger seatbacks.
A special seat cover designed to
allow airbag deployment.
The same warning light,
electronic control and diagnostic
unit as used for the front airbags.
Crash sensors located on the
front doors and C pillars (one
sensor on each pillar on each side
of the vehicle).
Side airbags, in combination with
safety belts, can help reduce the risk of severe injuries in the event of a
significant side impact collision.
The side airbags are fitted on the outboard side of the seatbacks of the
front seats. In certain lateral collisions, the airbag on the side affected by
the collision will be inflated. If the front passenger sensing system
detects an empty seat, the front passenger seat-mounted side airbag will
be deactivated. The airbag was designed to inflate between the door
panel and occupant to further enhance the protection provided
occupants in side impact collisions.
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
164
Do not lean your head on the door. The Safety Canopy
´
could
injure you as it deploys from the headliner.
Do not attempt to service, repair, or modify the Safety Canopy
´
system, its fuses, the A, B, or C pillar trim, or the headliner on a
vehicle containing a Safety Canopy
´
. See your authorized dealer.
All occupants of the vehicle including the driver should always
wear their safety belts even when an airbag SRS and Safety
Canopy
´
system is provided.
To reduce risk of injury, do not obstruct or place objects in the
deployment path of the inflatable Safety Canopy
´
.
How does the Safety Canopy
µ
system work?
The design and development of the
Safety Canopy
´
system included
recommended testing procedures
that were developed by a group of
automotive safety experts known as
the Side Airbag Technical Working
Group. These recommended testing
procedures help reduce the risk of
injuries related to the deployment of
side airbags (including the Safety
Canopy
´
).
The Safety Canopy
´
system
consists of the following:
An inflatable nylon curtain with
an inflator concealed behind the
headliner and above the doors
(one on each side of the vehicle).
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
166
2. Remove the rubber pad at the
bottom of the cup holder to locate
the access cap of the floor shifter
assembly.
3. Using a screwdriver (or
equivalent), remove the access
panel and depress the shifter lever
on the shift mechanism.
4. Apply the brake and shift into N (Neutral).
5. Return the cover plug to the console access hole. Start the vehicle.
If it is necessary to use the above procedure to move the gearshift lever,
it is possible that a fuse has blown or the vehicle’s brakelamps are not
operating properly. Refer to
Fuses and relays
in the
Roadside
Emergencies
chapter.
Do not drive your vehicle until you verify that the brakelamps
are working.
Always set the parking brake fully and make sure the gearshift is
latched in P (Park). Turn the ignition to the LOCK position and
remove the key whenever you leave your vehicle.
If the parking brake is fully released, but the brake warning lamp
remains illuminated, the brakes may not be working properly.
See your authorized dealer.
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Driving
231
The fuel pump shut-off switch is
located in the passenger’s foot well,
by the kick panel.
Use the following procedure to reset the fuel pump shut-off switch.
1. Turn the ignition to the OFF position.
2. Check the fuel system for leaks.
3. If no fuel leak is apparent, reset the fuel pump shut-off switch by
pushing in on the reset button.
4. Turn the ignition to the ON position. Pause for a few seconds and
return the key to the OFF position.
5. Make a further check for leaks in the fuel system.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
15
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
253
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini fuses
Standard
fuses
Maxi fuses
Cartridge
maxi fuses
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
40A
Orange
Green
50A
Red
Red
60A
Blue
Yellow
70A
Tan
80A
Natural
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
254
Passenger compartment fuse panel
The fuse panel is located below the
instrument panel on the driver’s
side.
To remove a fuse use the fuse puller tool provided on the fuse panel box.
The fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
1
20A
Moonroof, Adjustable pedals,
DSM, Memory lumbar motor
2
5A
Microcontroller power (SJB)
3
20A
Radio
4
20A
OBD II connector
5
5A
Moonroof
CB1
4
3
2
1
8
7
6
5
12
11
10
9
16
15
14
13
20
19
18
17
24
23
22
21
28
27
26
25
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
255
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
6
20A
Liftglass release motor, Door
unlock/lock
7
15A
Trailer stop/turn
8
15A
Ignition switch power, PATS
9
2A
6R TCM/PCM (Ignition
RUN/START), Fuel pump relay
10
5A
Front wiper RUN/ACC relay in
PDB
11
5A
Radio start
12
5A
Rear wiper motor RUN/ACC,
Trailer battery charge relay in
PDB, Radio
13
15A
Heated mirror, Manual climate
rear defrost indicator
14
20A
Horn
15
10A
Reverse lamps
16
10A
Trailer reverse lamps
17
10A
RCM, PAD lamp, OCS module
18
10A
Reverse park aid, IVD switch,
IVD, 4x4 module, 4x4 switch,
Heated seat switches, Compass,
Electrochromatic mirror, AUX
climate control
19
Not used
20
10A
Manual climate, DEATC, Brake
shift
21
Not used
22
15A
Brake switch, Bi-color stop lamps,
CHMSL, All turn lamps
23
15A
Interior lamps, Puddle lamps,
Battery saver, Instrument
illumination, Homelink
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
256
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
24
10A
Cluster, Theft LED
25
15A
Trailer park, Trailer electronic
brake module
26
15A
License plate/rear park lamp,
Front park lamps, Manual climate
27
15A
Tri-color stop lamps
28
10A
Manual/DEATC
CB1
25A
Windows
The following relays are located on either side of the passenger
compartment fuse panel. See your authorized dealer for service of these
relays.
Fuse/Relay Location
Description
Relay 1
Delayed ACC
Relay 2
Rear defrost
Relay 3
Park lamps
Relay 4
RUN/START
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
257
Power distribution box
The power distribution box is
located in the engine compartment.
The power distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
from overloads.
Always disconnect the battery before servicing high current
fuses.
To reduce risk of electrical shock, always replace the cover to
the Power Distribution Box before reconnecting the battery or
refilling fluid reservoirs.
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and Specifications
chapter.
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
258
The high-current fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
1
50A**
BATT 2 (SJB)
2
50A**
BATT 3 (SJB)
3
50A**
BATT 1 (SJB)
4
30A**
Fuel pump, Injectors
5
30A**
Third row seat (left)
6
40A**
IVD module
7
40A**
Powertrain Control Module
(PCM)
8
40A**
Heated windshield (left)
9
40A**
Heated windshield (right)
10
30A**
Power seat (right)
11
30A**
Starter
12
30A**
Third row seat (right)
13
30A**
Trailer tow battery charger
21
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
25
29
33
37
41
22
51
55
56
54
49
48
47
46B
46A
45B
45A
50B
50A
52
53
26
30
34
38
42
23
27
31
35
39
43
24
28
32
36
40
44
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
259
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
14
30A**
Memory seats (DSM)
40A**
Non-memory seats
15
40A**
Rear defrost, Heated mirrors
16
40A**
Blower motor
17
30A**
Trailer electronic brakes
18
30A**
Auxiliary blower motor
19
30A**
Running boards
20
Not used
21
20A*
Rear power point
22
20A*
Subwoofer
23
20A*
4x4
24
10A*
Powertrain Control Module
(PCM) KAP, CAN vent
25
20A*
Front power point/Cigar lighter
26
20A*
4x4 module
27
20A*
6R Transmission module
28
20A*
Heated seats, Power mirrors
29
20A*
Headlamps (right)
30
25A*
Rear wiper
31
15A*
Fog lamps
32
5A*
Power mirrors
33
30A*
IVD module
34
20A*
Headlamps (left)
35
10A*
AC clutch
36
Not used
37
30A*
Front wiper
38
15A*
5R Transmission
39
15A*
PCM power
40
15A*
Fan clutch, PCV valve, AC clutch
relay, GCC fan
41
15A*
SDARS/DVD
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
260
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
42
15A*
Redundant brake switch, EVMV,
MAFS, HEGO, EVR, VCT1, VCT2,
CMCV, CMS
43
15A*
Coil on plug (4.6L engine only),
Coil tower (4.0L engine only)
44
15A*
Injectors
45A
Not used
45B
GCC fan relay
46A
Not used
46B
Not used
47
Front wiper relay
48
PCM relay
49
Fuel pump relay
50A
Fog lamps relay
50B
AC clutch relay
51
Not used
52
A/C clutch (diode)
53
Not used
54
Trailer battery charger relay
55
Starter relay
56
Blower relay
* Mini Fuses ** Cartridge Fuses
CHANGING THE TIRES
If you get a flat tire while driving:
do not brake heavily.
gradually decrease the vehicle’s speed.
hold the steering wheel firmly.
slowly move to a safe place on the side of the road.
Note:
The tire pressure monitoring system (TPMS) indicator light will
illuminate when the spare is in use. To restore the full functionality of
the monitoring system, all road wheels equipped with tire pressure
monitoring sensors must be mounted on the vehicle.
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
261
Use only soft cups in the cupholder. Hard objects can injure you
in a collision.
Rear center console features (if equipped)
The rear center console incorporates the following features:
Utility compartment
Cupholders
Flip forward armrest to provide a
flat load floor
AUXILIARY POWER POINT (12VDC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
The auxiliary power point is located
in the floor console.
Do not use the power point for
operating the cigarette lighter
element (if equipped).
To prevent the fuse from being
blown, do not use the power
point(s) over the vehicle capacity of
12 VDC/180W.
To prevent the battery from being
discharged, do not use the power point longer than necessary when the
engine is not running.
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
93
Always transport children 12 years old and under in the back
seat and always properly use appropriate child restraints.
The National Highway Traffic Safety Administration (NHTSA)
recommends a minimum distance of at least 10 inches (25 cm)
between an occupant’s chest and the driver airbag module.
Never place your arm over the airbag module as a deploying
airbag can result in serious arm fractures or other injuries.
To properly position yourself away from the airbag:
Move your seat to the rear as far as you can while still reaching the
pedals comfortably.
Recline the seat slightly one or two degrees from the upright position.
Do not put anything on or over the airbag module. Placing
objects on or over the airbag inflation area may cause those
objects to be propelled by the airbag into your face and torso causing
serious injury.
Do not attempt to service, repair, or modify the airbag
supplemental restraint systems or its fuses. See your authorized
dealer.
Modifications to the front end of the vehicle, including frame,
bumper, front end body structure and non-Ford tow hooks may
effect the performance of the airbag sensors increasing the risk of
injury. Do not modify the front end of the vehicle with anything other
than authorized Ford accessories for your vehicle.
Additional equipment may affect the performance of the airbag
sensors increasing the risk of injury. Please refer to the
Body
Builders Layout Book
for instructions about the appropriate
installation of additional equipment.
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
182
A difficulty with the system is indicated by one or more of the following:
The readiness light will either
flash or stay lit.
The readiness light will not
illuminate immediately after
ignition is turned on.
A series of five beeps will be heard. The tone pattern will repeat
periodically until the problem and/or light are repaired.
If any of these things happen, even intermittently, have the SRS serviced
at an authorized dealer immediately. Unless serviced, the system may not
function properly in the event of a collision.
Seat-mounted side airbag system
Do not place objects or mount equipment on or near the airbag
cover on the side of the seatbacks of the front seats or in front
seat areas that may come into contact with a deploying airbag. Failure
to follow these instructions may increase the risk of personal injury in
the event of a collision.
Do not use accessory seat covers. The use of accessory seat
covers may prevent the deployment of the side airbags and
increase the risk of injury in an accident.
Do not lean your head on the door. The side airbag could injure
you as it deploys from the side of the seatback.
Do not attempt to service, repair, or modify the airbag SRS, its
fuses or the seat cover on a seat containing an airbag. See your
authorized dealer.
All occupants of the vehicle should always wear their safety belts
even when an airbag SRS is provided.
How does the side airbag system work?
The design and development of the side airbag system included
recommended testing procedures that were developed by a group of
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
190
Several air bag system components get hot after inflation. Do not
touch them after inflation.
If the side airbag has
deployed,
the airbag will
not function again. The side
airbag system (including the
seat) must be inspected and
serviced by an authorized
dealer .
If the airbag is not
replaced, the unrepaired area will
increase the risk of injury in a
collision.
Safety Canopy
µ
system (if equipped)
Do not place objects or
mount equipment on or
near the headliner at the siderail
that may come into contact with a
deploying Safety Canopy
´
. Failure
to follow these instructions may
increase the risk of personal injury
in the event of a collision.
Do not lean your head on the door. The Safety Canopy
´
could
injure you as it deploys from the headliner.
Do not attempt to service, repair, or modify the Safety Canopy
´
system, its fuses, the A, B, or C pillar trim, or the headliner on a
vehicle containing a Safety Canopy
´
. See your authorized dealer.
All occupants of the vehicle including the driver should always
wear their safety belts even when an airbag SRS and Safety
Canopy
´
system is provided.
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
192
2. Remove the rubber pad at the
bottom of the cup holder to locate
the access cap of the floor shifter
assembly.
3. Using a screwdriver (or
equivalent), remove the access
panel and depress the shifter lever
on the shift mechanism.
4. Apply the brake and shift into N (Neutral).
5. Return the cover plug to the console access hole. Start the vehicle.
If it is necessary to use the above procedure to move the gearshift lever,
it is possible that a fuse has blown or the vehicle’s brakelamps are not
operating properly. Refer to
Fuses and relays
in the
Roadside
Emergencies
chapter.
Do not drive your vehicle until you verify that the brakelamps
are working.
Always set the parking brake fully and make sure the gearshift is
latched in P (Park). Turn the ignition to the LOCK position and
remove the key whenever you leave your vehicle.
If the parking brake is fully released, but the brake warning lamp
remains illuminated, the brakes may not be working properly.
See your authorized dealer.
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Driving
257
The fuel pump shut-off switch is
located in the passenger’s foot well,
by the kick panel.
Use the following procedure to reset the fuel pump shut-off switch.
1. Turn the ignition to the OFF position.
2. Check the fuel system for leaks.
3. If no fuel leak is apparent, reset the fuel pump shut-off switch by
pushing in on the reset button.
4. Turn the ignition to the ON position. Pause for a few seconds and
return the key to the OFF position.
5. Make a further check for leaks in the fuel system.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
15
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
279
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini fuses
Standard
fuses
Maxi fuses
Cartridge
maxi fuses
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
40A
Orange
Green
50A
Red
Red
60A
Blue
Yellow
70A
Tan
80A
Natural
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
280
Passenger compartment fuse panel
The fuse panel is located below the
instrument panel on the driver’s
side.
To remove a fuse use the fuse puller tool provided on the fuse panel box.
The fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
1
20A
Moonroof, Adjustable pedals,
DSM, Memory lumbar motor
2
5A
Microcontroller power (SJB)
3
20A
Radio
4
10A
OBD II connector
5
5A
Moonroof
CB1
4
3
2
1
8
7
6
5
12
11
10
9
16
15
14
13
20
19
18
17
24
23
22
21
28
27
26
25
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
281
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
6
20A
Liftglass release motor, Door
unlock/lock
7
15A
Trailer stop/turn
8
15A
Ignition switch power, PATS
9
2A
6R TCM/PCM (Ignition
RUN/START), Fuel pump relay
10
5A
Front wiper RUN/ACC relay in
PDB
11
5A
Radio start
12
5A
Rear wiper motor RUN/ACC,
Trailer battery charge relay in
PDB, Radio
13
15A
Heated mirror, Manual climate
rear defrost indicator
14
20A
Horn
15
10A
Reverse lamps
16
10A
Trailer reverse lamps
17
10A
RCM, PAD lamp, OCS module
18
10A
Reverse park aid, IVD switch,
IVD, 4x4 module, 4x4 switch,
Heated seat switches, Compass,
Electrochromatic mirror, AUX
climate control
19
Not used
20
10A
Manual climate, DEATC, Brake
shift
21
Not used
22
15A
Brake switch, Bi-color stop lamps,
CHMSL, All turn lamps
23
15A
Interior lamps, Puddle lamps,
Battery saver, Instrument
illumination, Homelink
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
282
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
24
10A
Cluster, Theft LED
25
15A
Trailer tow park lamps
26
15A
License plate/rear park lamp,
Front park lamps, Manual climate
27
15A
Tri-color stop lamps
28
10A
Manual/DEATC
CB1
25A
Windows
The following relays are located on either side of the passenger
compartment fuse panel. See your authorized dealer for service of these
relays.
Fuse/Relay Location
Description
Relay 1
Delayed ACC
Relay 2
Rear defrost, Heated mirrors
Relay 3
Park lamps
Relay 4
RUN/START
Power distribution box
The power distribution box is
located in the engine compartment.
The power distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
from overloads.
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
283
Always disconnect the battery before servicing high current
fuses.
To reduce risk of electrical shock, always replace the cover to
the Power Distribution Box before reconnecting the battery or
refilling fluid reservoirs.
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and Specifications
chapter.
The high-current fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
1
50A**
BATT 2 (SJB)
2
50A**
BATT 3 (SJB)
3
50A**
BATT 1 (SJB)
4
30A**
Fuel pump, Injectors
5
30A**
Third row seat (left)
6
40A**
ABS pump
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
284
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
7
40A**
Powertrain Control Module
(PCM)
8
40A**
Heated windshield (left)
9
40A**
Heated windshield (right)
10
30A**
Power seat (right)
11
30A**
Starter
12
30A**
Third row seat (right)
13
30A**
Trailer tow battery charger
14
30A**
Memory seats (DSM)
40A**
Non-memory seats
15
40A**
Rear defrost, Heated mirrors
16
40A**
Blower motor
17
30A**
Trailer electronic brakes
18
30A**
Auxiliary blower motor
19
30A**
Running boards
20
Not used
21
20A*
Rear power point
22
20A*
Subwoofer
23
20A*
4x4
24
10A*
Powertrain Control Module
(PCM) KAP, CAN vent
25
20A*
Front power point/Cigar lighter
26
20A*
4x4 module
27
20A*
6R Transmission module
28
20A*
Heated seats, Power mirrors
29
15A*
Headlamps (right)
30
25A*
Rear wiper
31
15A*
Fog lamps
32
5A*
Power mirrors
33
30A*
ABS valve
34
15A*
Headlamps (left)
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
285
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
35
10A*
AC clutch
36
Not used
37
30A*
Front wiper
38
15A*
5R Transmission
39
15A*
PCM power
40
15A*
Fan clutch, PCV valve, AC clutch
relay, GCC fan
41
15A*
SDARS/DVD
42
15A*
Redundant brake switch, EVMV,
MAFS, HEGO, EVR, VCT1, VCT2,
CMCV, CMS
43
15A*
Coil on plug (4.6L engine only),
Coil tower (4.0L engine only)
44
15A*
Injectors
45B
GCC fan relay
45A
Not used
46B
Not used
46A
Not used
49
Fuel pump relay
50B
A/C clutch relay
50A
Fog lamps relay
51
Not used
52
A/C clutch (diode)
53
Not used
54
Trailer battery charger relay
55B
Front wiper relay
55A
PCM relay
56B
Starter relay
56A
Blower relay
* Mini Fuses ** Cartridge Fuses
2007 Explorer
(exp)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
286