Ford Explorer - 2000 Fuse Box Diagram

Ford Explorer - 2000 Fuse Box Diagram

Do not put anything on or over the air bag module. Placing
objects on or over the air bag inflation area may cause those
objects to be propelled by the air bag into your face and torso causing
serious injury.
Do not attempt to service, repair, or modify the Air Bag
Supplemental Restraint System or its fuses. See your Ford or
Lincoln Mercury dealer.
Children and air bags
For additional important safety
information, read all information on
safety restraints in this guide.
Children must always be properly
restrained. Accident statistics
suggest that children are safer when
properly restrained in the rear
seating positions than in the front
seating position. Failure to follow
these instructions may increase the
risk of injury in a collision.
Air bags can kill or injure a
child in a child seat.
NEVER
place a rear-facing child
seat in front of an active air bag. If
you must use a forward-facing
child seat in the front seat, move
the seat all the way back.
Seating and safety restraints
137
If any of these things happen, even intermittently, have the SRS serviced
at your dealership or by a qualified technician immediately. Unless
serviced, the system may not function properly in the event of a
collision.
Side air bag system (if equipped)
Do not place objects or mount equipment on or near the air bag
cover on the side of the seatbacks of the front seats or in front
seat areas that may come into contact with a deploying air bag. Failure
to follow these instructions may increase the risk of personal injury in
the event of a collision.
Do not use accessory seat covers. The use of accessory seat
covers may prevent the deployment of the side air bags and
increase the risk of injury in an accident.
Do not lean your head on the door. The side air bag could injure
you as it deploys from the side of the seatback.
Do not attempt to service, repair, or modify the air bag
Supplemental Restraint System, its fuses or the seat cover on a
seat containing an air bag. See your Ford or Lincoln Mercury dealer.
All occupants of the vehicle including the driver should always
wear their safety belts even when an air bag SRS is provided.
Seating and safety restraints
140
2. Insert the key and turn it to OFF. Apply the brake pedal and shift to N
(Neutral).
3. Start the vehicle.
If it is necessary to use the above procedure to move the gearshift lever,
it is possible that a fuse has blown or the vehicle’s brakelamps are not
operating properly. Refer to
Fuses and relays
in the
Roadside
emergencies
chapter.
Do not drive your vehicle until you verify that the brakelamps
are working.
If your vehicle gets stuck in mud or snow it may be rocked out by
shifting between forward and reverse gears, stopping between shifts, in a
steady pattern. Press lightly on the accelerator in each gear.
Do not rock the vehicle if the engine is not at normal operating
temperature or damage to the transmission may occur.
Do not rock the vehicle for more than a few minutes or damage
to the transmission and tires may occur or the engine may
overheat.
Always set the parking brake fully and make sure the gearshift is
latched in P (Park). Turn off the ignition whenever you leave
your vehicle.
If the parking brake is fully released, but the brake warning lamp
remains illuminated, the brakes may not be working properly.
See your dealer or a qualified service technician.
Driving with a 4–speed automatic transmission (if equipped)
To put your vehicle in gear, start the engine, depress the brake pedal,
then move gearshift lever out of P (Park).
Hold the brake pedal down while you move the gearshift lever
from P (Park) to another position. If you do not hold the brake
pedal down, your vehicle may move unexpectedly and injure someone.
Driving
160
The fuel pump shut-off switch is
located in the passenger’s foot well,
by the kick panel.
Use the following procedure to reset the fuel pump shut-off switch.
1. Turn the ignition to the OFF position.
2. Check the fuel system for leaks.
3. If no fuel leak is apparent, reset the fuel pump shut-off switch by
pushing in on the reset button.
4. Turn the ignition to the ON position. Pause for a few seconds and
return the key to the OFF position.
5. Make a further check for leaks in the fuel system.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
15
Roadside emergencies
191
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause
severe wire damage and could start a fire.
Standard fuse amperage rating and color
COLOR
Fuse
Rating
Mini
Fuses
Standard
Fuses
Maxi
Fuses
Cartridge
Maxi
Fuses
Fuse Link
Cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
70A
Tan
Brown
80A
Natural
Black
Roadside emergencies
192
Passenger compartment fuse panel
The fuse panel is located on the left
hand side of the instrument panel
facing the driver’s side door. Pull the
panel cover outward to access the
fuses.
To remove a fuse use the fuse puller tool provided on the fuse panel
cover.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
29
30
35
36
31
32
33
34
27
28
Roadside emergencies
193
The fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
1
7.5A
Power Mirror Switch, Power
Antenna, Memory Seat
2
7.5A
Blower Motor Relay, Air Bag
Diagnostic Monitor
3
7.5A
Left Stop/Turn Trailer Tow
Connector
4
10A
Left Headlamp
5
10A
Data Link Connector (DLC)
6
7.5A
Rear Blower Motor (Without
EATC)
7
7.5A
Right Stop/Turn Trailer Tow
Connector
8
10A
Right Headlamp, Foglamp Relay
9
7.5A
Brake Pedal Position Switch
10
7.5A
Speed Control/Amplifier Assembly,
Generic electronic Module (GEM),
Shift Lock Actuator, Blend Door
Actuator, A/C - Heater Assembly,
Flasher, Overhead Console, Load
Leveling Module
11
7.5A
Instrument Cluster
12
7.5A
Washer Pump Relay, Rear Washer
Pump Relay
13
20A
Brake Pedal Position Switch,
Brake Pressure Switch
14
10A
4 Wheel Anti-Lock Brake System
(4WABS) Module, 4WABS Main
Relay
15
7.5A
Instrument Cluster
Roadside emergencies
194
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
16
30A
Windshield Wiper Motor, Wiper
Hi-Lo Relay, Wiper Run/Park
Relay
17
25A
Cigar Lighter
18
25A
Drivers Unlock Relay, All Unlock
Relay, All Lock Relay, Power Seats
19
25A
PCM Power Diode
20
7.5A
RAP Module, Generic Electronic
Module (GEM), Radio
21
15A
Flasher (Hazard)
22
20A
Auxiliary Power Socket
23
Not Used
24
7.5A
Clutch Pedal Position (CPP)
Switch, Starter Interrupt Relay,
Anti-Theft
25
7.5A
Generic Electronic Module
(GEM), Instrument Cluster,
Securi-Lock
26
10A
Battery Saver Relay, Electronic
Shift Relay, Interior Lamp Relay,
Electronic Shift Control Module
27
15A
DRL, Backup Lamps Switch, DTR
Sensor, Electric Shift
28
7.5A
Generic Electronic Module
(GEM), Radio, Memory Seat
29
25A
Radio
30
15A
Park Lamp/Trailer Tow Relay
31
Not Used
32
10A
Heated Mirror
33
15A
Headlamps, Daytime Running
Lamps (DRL) Module, Instrument
Cluster
Roadside emergencies
195
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
34
7.5A
Rear Integrated Control Panel, CD
35
7.5A
Rear Blower Motor (w/EATC)
36
7.5A
EATC Memory, CD, Rear
Integrated Control Panel, Memory
Seat, Message Center
Power distribution box
The power distribution box is
located in the engine compartment.
The power distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
from overloads.
Always disconnect the battery before servicing high current
fuses.
Always replace the cover to the Power Distribution Box before
reconnecting the battery or refilling fluid reservoirs.
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and care
chapter.
Roadside emergencies
196
The high-current fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
1
60A**
I/P Fuse Panel
2
40A**
Blower Motor Relay
3
50A**
4 Wheel Anti-Lock Brake System
(4WABS) Module
4
30A**
Power Windows, Power Moon
Roof, Power Seat
5
50A**
Ignition Switch, Starter Relay
6
20A**
Transfer Case Relay
7
Not Used
8
20A**
Air Suspension
9
40A**
Air Suspension
10
30A**
PCM Power Relay
1
10A*
A/C Relay
2
30A*
Heated Seats
3
30A*
Heated Backlight
4
15A*
Fog Lamps and Daytime Running
Lamps
5
4
3
2
1
10
9
8
7
6
12
11
10
9
8
7
6
5
4
3
2
1
14
15
13
2
1
1
9
6
10
8
7
5
4
1
2
3
175
MEGAFUSE
Roadside emergencies
197
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
5
Not Used
6
10A*
Powertrain Control Module
7
30A*
4 Wheel Anti-Lock System
(4WABS) Module
8
15A*
Rear Wiper Motor
9
20A*
Fuel Pump Relay and RAP
Module
10
15A*
Horn Relay
11
15A*
Parklamps Relay and Mainlight
Switch
12
30A*
Mainlight Switch and
Multifunction Switch
13
15A*
Heated Oxygen Sensor, EGR
Vacuum Regulator, EVR Solenoid,
Camshaft Position (CMP) Sensor,
Canister Vent Solenoid
14
30A*
Generator/Voltage Regulator
15
Not Used
1
Wiper Park Relay
2
A/C Relay
3
Wiper High/Low Relay
4
PCM Power Relay
5
Fuel Pump Relay
6
Starter Relay
7
Horn Relay
8
Rear Wipe Down Relay
9
Blower Motor Relay
10
Rear Wipe Up Relay
1
Not Used
1
DRL Diode
2
Electronic Engine Controls Diode
* Mini Fuses ** Maxi Fuses
Roadside emergencies
198