Ford Expedition - 2013 Fuse Box Diagram

Ford Expedition - 2013 Fuse Box Diagram

PRINCIPLES OF OPERATION
WARNING:
Airbags DO NOT inflate slowly or gently, and the
risk of injury from a deploying airbag is the greatest close to the
trim covering the airbag module.
WARNING:
All occupants of your vehicle, including the driver,
should always properly wear their safety belts, even when an
airbag supplemental restraint system is provided.
WARNING:
Always transport children 12 years old and under in
the back seat and always properly use appropriate child
restraints.
WARNING:
Never place your arm over the airbag module as a
deploying airbag can result in serious arm fractures or other
injuries.
WARNING:
Airbags can kill or injure a child in a child seat.
NEVER place a rear-facing child seat in front of an active airbag.
If you must use a forward-facing child seat in the front seat, move the
seat all the way back.
WARNING:
Do not attempt to service, repair, or modify the
airbag supplemental restraint systems or its fuses. Contact your
authorized dealer as soon as possible.
WARNING:
Several airbag system components get hot after
inflation. Do not touch them after inflation.
WARNING:
If the airbag has deployed, the airbag will not
function again and must be replaced immediately. If the airbag is
not replaced, the unrepaired area will increase the risk of injury in a
collision.
Supplementary Restraints System
43
2013 Expedition
(exd)
Owners Guide gf, 1st Printing
USA
(fus)
Children and Airbags
WARNING:
Airbags can kill or injure a child in a child seat.
NEVER place a rear-facing child seat in front of an active airbag.
If you must use a forward-facing child seat in the front seat, move the
seat all the way back.
Children must always be properly
restrained. Accident statistics
suggest that children are safer when
properly restrained in the rear
seating positions than in the front
seating position. Failure to follow
these instructions may increase the
risk of injury in a collision.
SIDE AIRBAGS
WARNING:
Do not place objects or mount equipment on or near
the airbag cover, on the side of the seat backs (of the front
seats), or in front seat areas that may come into contact with a
deploying airbag. Failure to follow these instructions may increase the
risk of personal injury in the event of a collision.
WARNING:
Do not use accessory seat covers. The use of
accessory seat covers may prevent the deployment of the side
airbags and increase the risk of injury in an accident.
WARNING:
Do not lean your head on the door. The side airbag
could injure you as it deploys from the side of the seatback.
WARNING:
Do not attempt to service, repair, or modify the
airbag, its fuses or the seat cover on a seat containing an airbag.
Contact your authorized dealer as soon as possible.
Supplementary Restraints System
47
2013 Expedition
(exd)
Owners Guide gf, 1st Printing
USA
(fus)
WARNING:
Do not attempt to service, repair, or modify the
curtain airbags, its fuses, the A, B, or C pillar trim, or the
headliner on a vehicle containing curtain airbags. Contact your
authorized dealer as soon as possible.
WARNING:
All occupants of your vehicle including the driver
should always wear their safety belts even when an airbag SRS
and curtain airbag is provided.
WARNING:
To reduce risk of injury, do not obstruct or place
objects in the deployment path of the curtain airbag.
WARNING:
If the curtain airbags have deployed,
the curtain
airbags will not function again. The curtain airbags
(including the A, B and C pillar trim and headliner) must be
inspected and serviced by an authorized dealer.
If the curtain
airbag is not replaced, the unrepaired area will increase the risk of
injury in a collision.
The Safety Canopy will deploy during significant side collisions or when a
certain likelihood of a rollover event is detected by the rollover sensor.
The Safety Canopy is mounted to the roof side-rail sheet metal, behind
the headliner, above each row of seats. In certain lateral collisions or
rollover events, the Safety Canopy will be activated, regardless of which
seats are occupied. The Safety Canopy is designed to inflate between the
side window area and occupants to further enhance protection provided
in side impact collisions and rollover events.
The system consists of the
following:
Safety canopy curtain airbags
fitted above the trim panels over
the front and rear side windows
identified by wording on the
B-pillar trim.
Supplementary Restraints System
49
2013 Expedition
(exd)
Owners Guide gf, 1st Printing
USA
(fus)
AUXILIARY POWER POINTS
WARNING:
Do not plug optional electrical accessories into the
cigarette lighter socket (if equipped). Improper use of the lighter
can cause damage not covered by your warranty, and can result in fire
or serious injury.
Note:
If used when the engine is not running, the battery will discharge.
There may be insufficient power to restart your engine.
Note:
Do not insert objects other than an accessory plug into the power
point. This will damage the outlet and blow the fuse.
Note:
Do not hang any type of accessory or accessory bracket from the
plug.
Note:
Do not use the power point over the vehicle capacity of 12 volt
DC 180 watts or a fuse may blow.
Note:
Do not use the power point for operating a cigarette lighter
element.
Note:
Improper use of the power outlet can cause damage not covered
by your warranty.
Note:
Always keep the power point caps closed when not in use.
Run the engine for full capacity use of the power point. To prevent the
battery from being discharged:
Do not use the power point longer than necessary when the engine is
not running.
Do not leave devices plugged in overnight or when the vehicle is
parked for extended periods.
Locations
Power points may be found:
on the instrument panel
by the passenger’s ankle near the floor on the front console
on the rear of the center console
on the right rear quarter panel.
Auxiliary Power Points
189
2013 Expedition
(exd)
Owners Guide gf, 1st Printing
USA
(fus)
Brake-Shift Interlock – Floor-Shift Transmission
WARNING:
Do not drive your vehicle until you verify that the
brake lamps are working.
WARNING:
When doing this procedure, you will be taking the
vehicle out of park which means the vehicle can roll freely. To
avoid unwanted vehicle movement, always fully set the parking brake
prior to doing this procedure. Use wheel chocks if appropriate.
WARNING:
If the parking brake is fully released, but the brake
warning lamp remains illuminated, the brakes may not be
working properly. See your authorized dealer.
This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the on position unless the brake pedal is pressed.
If you cannot move the gearshift lever out of P (Park) with ignition in
the on position and the brake pedal pressed, it is possible that a fuse has
blown or the vehicle’s brake lamps are not operating properly. Refer to
Fuses
chapter for more information.
If the fuse is not blown and the brake lamps are working properly, the
following procedure will allow you to move the gearshift lever from P
(Park):
1. Apply the parking brake, turn the
ignition key to the off position, and
remove the key.
2. Using a screwdriver (or similar
tool), carefully pry off and remove
the chrome trim ring (1) from the
shifter bezel base.
3. Remove the console tray insert
and screw (2) from the trim panel.
4. Using a screwdriver (or similar tool), carefully pry the trim panel (3)
up and disconnect it from the console to expose the inside of the
gearshift.
3
1
2
Transmission
213
2013 Expedition
(exd)
Owners Guide gf, 1st Printing
USA
(fus)
5. Locate the brake shift interlock
lever on the passenger side of the
shifter assembly.
6. Apply the brake pedal and turn the
ignition key to the on position. Using
a screwdriver (or similar tool), press
and hold the brake shift interlock
lever while pulling the gearshift lever
out of the P (Park) position and into
the N (Neutral) position.
7. Install the trim panel (3), screw (2) and chrome trim ring (1) in
reverse order.
8. Apply brake pedal, start the vehicle, and release the parking brake.
Note:
See your authorized dealer as soon as possible if this procedure is
used.
Brake-Shift Interlock – Column-Shift Transmission
WARNING:
Do not drive your vehicle until you verify that the
brakelamps are working.
WARNING:
When doing this procedure you will be taking the
vehicle out of park which means the vehicle can roll freely. To
avoid unwanted vehicle movement always fully set parking brake prior
to doing this procedure. Use wheel chocks if appropriate.
WARNING:
If the parking brake is fully released, but the brake
warning lamp remains illuminated, the brakes may not be
working properly. See your authorized dealer.
This vehicle is equipped with a park/brake-shift interlock feature that
prevents the gearshift lever from being moved from P (Park) when the
ignition is in the on position unless brake pedal is pressed.
If you cannot move the gearshift lever out of P (Park) with ignition in
the on position and the brake pedal pressed, or when the ignition is in
the off position, it is possible that a fuse has blown or the vehicle’s brake
lamps are not operating properly. Refer to
Fuses
chapter for more
information.
214
Transmission
2013 Expedition
(exd)
Owners Guide gf, 1st Printing
USA
(fus)
If the fuse is not blown, perform the following procedure:
1. Apply the parking brake.
2. Turn the key to the off position.
3. Remove the access plug on top of
the steering column.
4. Using a flat-head screwdriver or
similar tool, move the brake-shift
interlock actuator spindle toward
the left, apply the brake, place the
key in the on position and shift the
transmission into N (Neutral).
5. Start the vehicle.
6. Reinstall the access plug.
If Your Vehicle Gets Stuck in Mud or Snow
Note:
Do not rock the vehicle if the engine is not at normal operating
temperature or damage to the transmission may occur.
Note:
Do not rock the vehicle for more than a minute or damage to the
transmission and tires may occur, or the engine may overheat.
If your vehicle gets stuck in mud or snow, it may be rocked out by
shifting between forward and reverse gears, stopping between shifts in a
steady pattern. Press lightly on the accelerator in each gear.
Transmission
215
2013 Expedition
(exd)
Owners Guide gf, 1st Printing
USA
(fus)
TOWING A TRAILER
WARNING:
Do not exceed the GVWR or the GAWR specified on
the certification label.
WARNING:
Towing trailers beyond the maximum recommended
gross trailer weight exceeds the limit of the vehicle and could
result in engine damage, transmission damage, structural damage, loss
of vehicle control, vehicle rollover and personal injury.
Note:
For information on electrical items such as fuses or relays, see the
Fuses
chapter.
Your vehicle’s load capacity is designated by weight, not by volume, so
you cannot necessarily use all available space when loading a vehicle.
Towing a trailer places an additional load on your vehicle’s engine,
transmission, axle, brakes, tires and suspension. Inspect these
components periodically during, and after, any towing operation.
When driving with a trailer or payload, a slight takeoff vibration or
shudder may be present due to the increased payload weight. Additional
information regarding proper trailer loading and setting your vehicle up
for towing is noted under
Load limit
in the
Load Carrying
chapter and
in the
RV & Trailer Towing Guide,
available at your authorized dealer.
Load Placement
To help minimize how trailer movement affects the vehicle when driving:
Load the heaviest items closest to the trailer floor.
Load the heaviest items so they are centered between the left and
right side trailer tires.
Load the heaviest items above the trailer axles or just slightly forward
toward the trailer tongue. Do not allow the final trailer tongue weight
to go above or below 10–15% of the loaded trailer weight.
Select a tow bar with the correct rise or drop. When both the loaded
vehicle and trailer are connected, the trailer frame should be level, or
slightly angled down, when viewed from the side.
TRAILER SWAY CONTROL
Note:
This feature does not prevent trailer sway, but reduces it once it
begins.
Note:
This feature cannot stop all trailers from swaying.
Note:
In some cases, if vehicle speed is too high, the system may
activate multiple times, gradually reducing vehicle speed.
Towing
251
2013 Expedition
(exd)
Owners Guide gf, 1st Printing
USA
(fus)
CHANGING A FUSE
Fuses
WARNING:
Always replace a fuse with one that has the
specified amperage rating. Using a fuse with a higher amperage
rating can cause severe wire damage and could start a fire.
If electrical components in the vehicle
are not working, a fuse may have
blown. Blown fuses are identified by a
broken wire within the fuse. Check
the appropriate fuses before replacing
any electrical components.
Standard Fuse Amperage Rating and Color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
Yellow
70A
Tan
Brown
80A
Natural
Black
Black
15
Fuses
281
2013 Expedition
(exd)
Owners Guide gf, 1st Printing
USA
(fus)
FUSE SPECIFICATION CHART
Power Distribution Box
WARNING:
Always disconnect the battery before servicing high
current fuses.
WARNING:
To reduce risk of electrical shock, always replace the
cover to the power distribution box before reconnecting the
battery or refilling fluid reservoirs.
The power distribution box is located in the engine compartment. It has
high-current fuses that protect your vehicle’s main electrical systems
from overloads.
If the battery has been disconnected and reconnected, see
Changing the
Vehicle Battery
in the
Maintenance
chapter.
The high-current fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
1
Powertrain control module relay
2
Starter relay
3
Blower motor relay
282
Fuses
2013 Expedition
(exd)
Owners Guide gf, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
4
Trailer tow battery charge relay
5
Fuel pump relay
6
Electronic fan 1 relay
7
Rear window defroster/heated
mirror relay
8
Electronic fan 3 relay
9
Run/start relay
10
Rear air suspension relay
11
40A**
Power running board
12
40A**
Run/start relay
13
30A **
Starter relay
14
40A**
Electronic fan
15
Not used
16
40A**
Electronic fan
17
Not used
18
30A**
Trailer brake
19
60A**
Rear air suspension relay feed
20
20A**
4x4 module
21
30A**
Trailer tow battery charge relay
22
30A**
Passenger power seat
23
A/C clutch relay
24
Trailer tow park lamp relay
25
Not used
26
Not used
27
20A*
4x4
28
25A*
Trailer tow park lamp relay
29
20A*
Backup lamps, Integrated wheel
end solenoid
30
10A*
A/C clutch relay
31
Not used
32
40A**
Blower motor relay
Fuses
283
2013 Expedition
(exd)
Owners Guide gf, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
33
40A**
110 volt AC power point
34
30A**
Auxiliary blower motor
35
30A**
Powertrain control module relay
36
30A**
Power liftgate
37
Trailer tow left hand stop/turn
relay
38
Trailer tow right hand stop/turn
relay
39
Backup lamps relay
40
Electronic fan 2 relay
41
10A*
Powertrain control module
keep-alive power
42
Not used
43
5A*
Brake on/off switch
44
20A*
Fuel pump relay
45
25A*
Trailer tow stop/turn lamps relay
46
Not used
47
Not used
48
30A**
Rear air suspension module
49
Not used
50
30A**
Front wiper motor relay
51
40A**
Rear window defroster/heated
mirror relay
52
10A*
Anti-lock brake system run/start
feed
53
10A*
Rear air suspension module
54
Not used
55
5A*
Fuel pump relay coil run/start
feed
56
30A*
Passenger compartment fuse
panel R/S feed
57
10A*
Blower motor relay coil
284
Fuses
2013 Expedition
(exd)
Owners Guide gf, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
58
15A*
Trailer tow backup lamps
59
15A*
Heated mirrors
60
Not used
61
Fuel pump diode
62
Not used
63
25A**
Electronic fan
64
30A**
Moon roof
65
20A**
Auxiliary power point
(instrument panel)
66
20A**
Auxiliary power point (rear of
center console)
67
40A**
Front row climate controlled
seats
68
60A**
Anti-lock brake system valves
69
60A**
Anti-lock brake system pump
70
30A**
Third row power fold seat
71
20A**
Auxiliary power point/cigar
lighter
72
20A**
Auxiliary power point (right rear
quarter panel)
73
Not used
74
30A**
Driver power seat
75
20A*
Vehicle power 1 – powertrain
control module
76
20A*
Vehicle power 2 – powertrain
control module
77
15A*
Vehicle power 4 – ignition coils
78
Not used
79
20A*
Vehicle power 3 – powertrain
control module
80
Not used
81
Not used
Fuses
285
2013 Expedition
(exd)
Owners Guide gf, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
82
Not used
83
Not used
84
Not used
85
Wiper motor relay
* Mini Fuses ** Cartridge Fuses
Passenger Compartment Fuse Panel
The fuse panel is located under the right-hand side of the instrument
panel.
To remove the trim panel for access
to the fuse box, pull the panel
toward you and swing it out away
from the side and remove it. To
reinstall it, line up the tabs with the
grooves on the panel, then push it
shut.
To remove the fuse box cover, press in the tabs on both sides of the
cover, then pull the cover off.
To reinstall the fuse box cover, place the top part of the cover on the
fuse panel, then push the bottom part of the cover until you hear it click
shut. Gently pull on the cover to make sure it is seated properly.
286
Fuses
2013 Expedition
(exd)
Owners Guide gf, 1st Printing
USA
(fus)
The fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
1
30A
Driver window
2
15A
Driver side memory module
3
15A
Audio rear seat controls, Satellite
radio, SYNC
±
4
30A
Not used (spare)
5
10A
Keypad illumination, 3rd row seat
enable, Brake shift interlock,
Smart fuse panel logic power
6
20A
Turn signals
7
10A
Low beam headlamps (left)
8
10A
Low beam headlamps (right)
9
15A
Interior lights
10
15A
Switch backlighting, Puddle lamps
Fuses
287
2013 Expedition
(exd)
Owners Guide gf, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
11
10A
Not used (spare)
12
7.5A
Power mirrors, Driver seat
memory switch
13
5A
Not used (spare)
14
10A
Power liftgate module – keep-alive
power
15
10A
Climate control, Global positioning
satellite module
16
15A
Not used (spare)
17
20A
Door locks, Liftgate release,
Liftglass release
18
20A
Second row heated seats
19
25A
Rear wiper
20
15A
Adjustable pedals, Datalink
21
15A
Fog lamps
22
15A
Park lamps
23
15A
High beam headlamps
24
20A
Horn
25
10A
Demand lamps, Glovebox, Visor
26
10A
Instrument panel cluster
27
20A
Ignition switch
28
5A
Radio
29
5A
Instrument panel cluster
30
5A
Not used (spare)
31
10A
Not used (spare)
32
10A
Airbag module
33
10A
Trailer brake logic
34
5A
Not used (spare)
35
10A
Rear park assist, 4x4, rear video
camera, 2nd row heated seats
36
5A
Passive anti-theft system
37
10A
Climate control
288
Fuses
2013 Expedition
(exd)
Owners Guide gf, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
38
20A
Subwoofer
39
20A
Radio
40
20A
Navigation amplifier
41
15A
Power windows, Power vents,
Power moonroof, Auto dimming
rear view mirror, 110 volt AC
power point
42
10A
Not used (spare)
43
10A
Rear wiper logic, Rain sensor
44
10A
Trailer tow battery charge relay
coil
45
5A
Front wiper logic
46
7.5A
Climate control, Auxiliary relay
control
47
30A Circuit
Breaker
Power windows, Moonroof
48
Delayed accessory relay
Fuses
289
2013 Expedition
(exd)
Owners Guide gf, 1st Printing
USA
(fus)
PRINCIPLES OF OPERATION
WARNING:
Airbags do not inflate slowly or gently, and the risk
of injury from a deploying airbag is the greatest close to the trim
covering the airbag module.
WARNING:
All occupants of your vehicle, including the driver,
should always properly wear their safety belts, even when an
airbag supplemental restraint system is provided.
WARNING:
Always transport children 12 years old and under in
the back seat and always properly use appropriate child
restraints.
WARNING:
Never place your arm over the airbag module as a
deploying airbag can result in serious arm fractures or other
injuries.
WARNING:
Airbags can kill or injure a child in a child seat.
NEVER place a rear-facing child seat in front of an active airbag.
If you must use a forward-facing child seat in the front seat, move the
seat all the way back.
WARNING:
Do not attempt to service, repair, or modify the
airbag supplemental restraint systems or its fuses. Contact your
authorized dealer as soon as possible.
WARNING:
Several airbag system components get hot after
inflation. Do not touch them after inflation.
WARNING:
If the airbag has deployed, the airbag will not
function again and must be replaced immediately. If the airbag is
not replaced, the unrepaired area will increase the risk of injury in a
crash.
46
Supplementary Restraints System
2013 Expedition
(exd)
Owners Guide gf, 2nd Printing, October 2012
USA
(fus)
Children and Airbags
WARNING:
Airbags can kill or injure a child in a child seat.
Never place a rear-facing child seat in front of an active airbag. If
you must use a forward-facing child seat in the front seat, move the
seat all the way back.
Children must always be properly
restrained. Accident statistics
suggest that children are safer when
properly restrained in the rear
seating positions than in the front
seating position. Failure to follow
these instructions may increase the
risk of injury in a crash.
SIDE AIRBAGS
WARNING:
Do not place objects or mount equipment on or near
the airbag cover, on the side of the seat backs (of the front
seats), or in front seat areas that may come into contact with a
deploying airbag. Failure to follow these instructions may increase the
risk of personal injury in the event of a crash.
WARNING:
Do not use accessory seat covers. The use of
accessory seat covers may prevent the deployment of the side
airbags and increase the risk of injury in an accident.
WARNING:
Do not lean your head on the door. The side airbag
could injure you as it deploys from the side of the seat back.
WARNING:
Do not attempt to service, repair, or modify the
airbag, its fuses or the seat cover on a seat containing an airbag,
as you could be seriously injured or killed. Contact your authorized
dealer as soon as possible.
50
Supplementary Restraints System
2013 Expedition
(exd)
Owners Guide gf, 2nd Printing, October 2012
USA
(fus)
WARNING:
Do not attempt to service, repair, or modify the
curtain airbags, its fuses, the A, B, or C pillar trim, or the headliner
on a vehicle containing curtain airbags, as you could be seriously injured
or killed. Contact your authorized dealer as soon as possible.
WARNING:
All occupants of your vehicle including the driver should
always wear their safety belts even when an airbag supplemental
restraint system and curtain airbag is provided. Failure to properly wear
your safety belt could seriously increase the risk of injury or death.
WARNING:
To reduce risk of injury, do not obstruct or place
objects in the deployment path of the curtain airbag.
WARNING:
If the curtain airbags have deployed, the curtain
airbags will not function again. The curtain airbags (including the
A, B and C pillar trim and headliner) must be inspected and serviced
by an authorized dealer. If the curtain airbag is not replaced, the
unrepaired area will increase the risk of injury in a collision.
The Safety Canopy will deploy during significant side collisions or when a
certain likelihood of a rollover event is detected by the rollover sensor.
The Safety Canopy is mounted to the roof side-rail sheet metal, behind
the headliner, above each row of seats. In certain lateral collisions or
rollover events, the Safety Canopy will be activated, regardless of which
seats are occupied. The Safety Canopy is designed to inflate between the
side window area and occupants to further enhance protection provided
in side impact collisions and rollover events.
The system consists of:
safety canopy curtain airbags
located above the trim panels
over the front and rear side
windows identified by wording on
the B-pillar trim.
52
Supplementary Restraints System
2013 Expedition
(exd)
Owners Guide gf, 2nd Printing, October 2012
USA
(fus)
AUXILIARY POWER POINTS
WARNING:
Do not plug optional electrical accessories into the
cigarette lighter socket (if equipped). Improper use of the lighter
can cause damage not covered by your warranty, and can result in fire
or serious injury.
Note:
If used when the engine is not running, the battery will discharge.
There may be insufficient power to restart your engine.
Note:
Do not insert objects other than an accessory plug into the power
point. This will damage the outlet and blow the fuse.
Note:
Do not hang any type of accessory or accessory bracket from the
plug.
Note:
Do not use the power point over the vehicle capacity of 12 volt
DC 180 watts or a fuse may blow.
Note:
Do not use the power point for operating a cigarette lighter
element.
Note:
Improper use of the power outlet can cause damage not covered
by your warranty.
Note:
Always keep the power point caps closed when not in use.
Run the engine for full capacity use of the power point. To prevent the
battery from being discharged:
Do not use the power point longer than necessary when the engine is
not running.
Do not leave devices plugged in overnight or when the vehicle is
parked for extended periods.
Locations
Power points may be found:
on the instrument panel
by the passenger’s ankle near the floor on the front console
on the rear of the center console
on the right rear quarter panel.
Auxiliary Power Points
193
2013 Expedition
(exd)
Owners Guide gf, 2nd Printing, October 2012
USA
(fus)
WARNING:
If the parking brake is fully released, but the brake
warning lamp remains illuminated, the brakes may not be
working properly. See your authorized dealer.
This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the on position unless the brake pedal is pressed.
If you cannot move the gearshift lever out of P (Park) with ignition in
the on position and the brake pedal pressed, it is possible that a fuse has
blown or the vehicle’s brake lamps are not operating properly. Refer to
Fuses
chapter for more information.
If the fuse is not blown and the brake lamps are working properly, the
following procedure will allow you to move the gearshift lever from P
(Park):
1. Apply the parking brake, turn the
ignition key to the off position, and
remove the key.
2. Using a screwdriver (or similar
tool), carefully pry off and remove
the chrome trim ring (1) from the
shifter bezel base.
3. Remove the console tray insert
and screw (2) from the trim panel.
4. Using a screwdriver (or similar
tool), carefully pry the trim panel (3) up and disconnect it from the
console to expose the inside of the gearshift.
5. Locate the brake shift interlock
lever on the passenger side of the
shifter assembly.
6. Apply the brake pedal and turn the
ignition key to the on position. Using
a screwdriver (or similar tool), press
and hold the brake shift interlock
lever while pulling the gearshift lever
out of the P (Park) position and into
the N (Neutral) position.
3
1
2
Transmission
217
2013 Expedition
(exd)
Owners Guide gf, 2nd Printing, October 2012
USA
(fus)
7. Install the trim panel (3), screw (2) and chrome trim ring (1) in
reverse order.
8. Apply brake pedal, start the vehicle, and release the parking brake.
Note:
See your authorized dealer as soon as possible if this procedure is
used.
Brake-Shift Interlock – Column-Shift Transmission
WARNING:
Do not drive your vehicle until you verify that the
brakelamps are working.
WARNING:
When doing this procedure you will be taking the
vehicle out of park which means the vehicle can roll freely. To
avoid unwanted vehicle movement always fully set parking brake prior
to doing this procedure. Use wheel chocks if appropriate.
WARNING:
If the parking brake is fully released, but the brake
warning lamp remains illuminated, the brakes may not be
working properly. See your authorized dealer.
This vehicle is equipped with a park/brake-shift interlock feature that
prevents the gearshift lever from being moved from P (Park) when the
ignition is in the on position unless brake pedal is pressed.
If you cannot move the gearshift lever out of P (Park) with ignition in
the on position and the brake pedal pressed, or when the ignition is in
the off position, it is possible that a fuse has blown or the vehicle’s brake
lamps are not operating properly. Refer to
Fuses
chapter for more
information.
If the fuse is not blown, perform the following procedure:
1. Apply the parking brake.
2. Turn the key to the off position.
218
Transmission
2013 Expedition
(exd)
Owners Guide gf, 2nd Printing, October 2012
USA
(fus)
TOWING A TRAILER
WARNING:
Do not exceed the GVWR or the GAWR specified on
the certification label.
WARNING:
Towing trailers beyond the maximum recommended
gross trailer weight exceeds the limit of your vehicle and could
result in engine damage, transmission damage, structural damage, loss
of vehicle control, vehicle rollover and personal injury.
Note:
For information on electrical items such as fuses or relays, see the
Fuses
chapter.
Your vehicle’s load capacity designation is by weight, not by volume, so
you cannot necessarily use all available space when loading a vehicle.
Towing a trailer places an extra load on your vehicle’s engine,
transmission, axle, brakes, tires and suspension. Inspect these
components periodically during, and after, any towing operation.
When driving with a trailer or payload, a slight takeoff vibration or
shudder may be present due to the increased payload weight. You can
find more information about proper trailer loading and setting your
vehicle up for towing under
Load limit
in the
Load Carrying
chapter
and in the
RV & Trailer Towing Guide,
available at an authorized
dealer.
Load Placement
To help minimize how trailer movement affects your vehicle when
driving:
Load the heaviest items closest to the trailer floor.
Load the heaviest items centered between the left and right side
trailer tires.
Load the heaviest items above the trailer axles or just slightly forward
toward the trailer tongue. Do not allow the final trailer tongue weight
to go above or below 10–15% of the loaded trailer weight.
Select a tow bar with the correct rise or drop. When both the loaded
vehicle and trailer are connected, the trailer frame should be level, or
slightly angled down, when viewed from the side.
Towing
255
2013 Expedition
(exd)
Owners Guide gf, 2nd Printing, October 2012
USA
(fus)
CHANGING A FUSE
Fuses
WARNING:
Always replace a fuse with one that has the
specified amperage rating. Using a fuse with a higher amperage
rating can cause severe wire damage and could start a fire.
If electrical components in the vehicle
are not working, a fuse may have
blown. Blown fuses are identified by a
broken wire within the fuse. Check
the appropriate fuses before replacing
any electrical components.
Standard Fuse Amperage Rating and Color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
Yellow
70A
Tan
Brown
80A
Natural
Black
Black
15
286
Fuses
2013 Expedition
(exd)
Owners Guide gf, 2nd Printing, October 2012
USA
(fus)
FUSE SPECIFICATION CHART
Power Distribution Box
WARNING:
Always disconnect the battery before servicing high
current fuses.
WARNING:
To reduce risk of electrical shock, always replace the
cover to the power distribution box before reconnecting the
battery or refilling fluid reservoirs.
The power distribution box is located in the engine compartment. It has
high-current fuses that protect your vehicle’s main electrical systems
from overloads.
If the battery has been disconnected and reconnected, see
Changing the
Vehicle Battery
in the
Maintenance
chapter.
The high-current fuses are coded as follows:
Fuse or relay
location
Fuse amp
rating
Protected circuits
1
Powertrain control module relay
2
Starter relay
3
Blower motor relay
Fuses
287
2013 Expedition
(exd)
Owners Guide gf, 2nd Printing, October 2012
USA
(fus)
Fuse or relay
location
Fuse amp
rating
Protected circuits
4
Trailer tow battery charge relay
5
Fuel pump relay
6
Electronic fan 1 relay
7
Rear window defroster/heated
mirror relay
8
Electronic fan 3 relay
9
Run/start relay
10
Rear air suspension relay
11
40A**
Power running board
12
40A**
Run/start relay
13
30A **
Starter relay
14
40A**
Electronic fan
15
Not used
16
40A**
Electronic fan
17
Not used
18
30A**
Trailer brake
19
60A**
Rear air suspension relay feed
20
20A**
4x4 module
21
30A**
Trailer tow battery charge relay
22
30A**
Passenger power seat
23
A/C clutch relay
24
Trailer tow park lamp relay
25
Not used
26
Not used
27
20A*
4x4
28
25A*
Trailer tow park lamp relay
29
20A*
Backup lamps, Integrated wheel
end solenoid
30
10A*
A/C clutch relay
31
Not used
32
40A**
Blower motor relay
288
Fuses
2013 Expedition
(exd)
Owners Guide gf, 2nd Printing, October 2012
USA
(fus)
Fuse or relay
location
Fuse amp
rating
Protected circuits
33
40A**
110 volt AC power point
34
30A**
Auxiliary blower motor
35
30A**
Powertrain control module relay
36
30A**
Power liftgate
37
Trailer tow left hand stop/turn
relay
38
Trailer tow right hand stop/turn
relay
39
Backup lamps relay
40
Electronic fan 2 relay
41
10A*
Powertrain control module
keep-alive power
42
Not used
43
5A*
Brake on/off switch
44
20A*
Fuel pump relay
45
25A*
Trailer tow stop/turn lamps relay
46
Not used
47
Not used
48
30A**
Rear air suspension module
49
Not used
50
30A**
Front wiper motor relay
51
40A**
Rear window defroster/heated
mirror relay
52
10A*
Anti-lock brake system run/start
feed
53
10A*
Rear air suspension module
54
Not used
55
5A*
Fuel pump relay coil run/start
feed
56
30A*
Passenger compartment fuse
panel R/S feed
57
10A*
Blower motor relay coil
Fuses
289
2013 Expedition
(exd)
Owners Guide gf, 2nd Printing, October 2012
USA
(fus)
Fuse or relay
location
Fuse amp
rating
Protected circuits
58
15A*
Trailer tow backup lamps
59
15A*
Heated mirrors
60
Not used
61
Fuel pump diode
62
Not used
63
25A**
Electronic fan
64
30A**
Moon roof
65
20A**
Auxiliary power point
(instrument panel)
66
20A**
Auxiliary power point (rear of
center console)
67
40A**
Front row climate controlled
seats
68
60A**
Anti-lock brake system valves
69
60A**
Anti-lock brake system pump
70
30A**
Third row power fold seat
71
20A**
Auxiliary power point/cigar
lighter
72
20A**
Auxiliary power point (right rear
quarter panel)
73
Not used
74
30A**
Driver power seat
75
20A*
Vehicle power 1 – powertrain
control module
76
20A*
Vehicle power 2 – powertrain
control module
77
15A*
Vehicle power 4 – ignition coils
78
Not used
79
20A*
Vehicle power 3 – powertrain
control module
80
Not used
81
Not used
290
Fuses
2013 Expedition
(exd)
Owners Guide gf, 2nd Printing, October 2012
USA
(fus)
Fuse or relay
location
Fuse amp
rating
Protected circuits
82
Not used
83
Not used
84
Not used
85
Wiper motor relay
* Mini Fuses ** Cartridge Fuses
Passenger Compartment Fuse Panel
The fuse panel is located under the right-hand side of the instrument
panel.
To remove the trim panel for access
to the fuse box, pull the panel
toward you and swing it out away
from the side and remove it. To
reinstall it, line up the tabs with the
grooves on the panel, then push it
shut.
To remove the fuse box cover, press in the tabs on both sides of the
cover, then pull the cover off.
To reinstall the fuse box cover, place the top part of the cover on the
fuse panel, then push the bottom part of the cover until you hear it click
shut. Gently pull on the cover to make sure it is seated properly.
Fuses
291
2013 Expedition
(exd)
Owners Guide gf, 2nd Printing, October 2012
USA
(fus)
The fuses are coded as follows:
Fuse or relay
location
Fuse amp
rating
Protected circuits
1
30A
Driver window
2
15A
Driver side memory module
3
15A
Audio rear seat controls, Satellite
radio, SYNC®
4
30A
Not used (spare)
5
10A
Keypad illumination, 3rd row seat
enable, Brake shift interlock,
Smart fuse panel logic power
6
20A
Turn signals
7
10A
Low beam headlamps (left)
8
10A
Low beam headlamps (right)
9
15A
Interior lights
10
15A
Switch backlighting, Puddle lamps
292
Fuses
2013 Expedition
(exd)
Owners Guide gf, 2nd Printing, October 2012
USA
(fus)
Fuse or relay
location
Fuse amp
rating
Protected circuits
11
10A
Not used (spare)
12
7.5A
Power mirrors, Driver seat
memory switch
13
5A
Not used (spare)
14
10A
Power liftgate module – keep-alive
power
15
10A
Climate control, Global positioning
satellite module
16
15A
Not used (spare)
17
20A
Door locks, Liftgate release,
Liftglass release
18
20A
Second row heated seats
19
25A
Rear wiper
20
15A
Adjustable pedals, Datalink
21
15A
Fog lamps
22
15A
Park lamps
23
15A
High beam headlamps
24
20A
Horn
25
10A
Demand lamps, Glovebox, Visor
26
10A
Instrument panel cluster
27
20A
Ignition switch
28
5A
Radio
29
5A
Instrument panel cluster
30
5A
Not used (spare)
31
10A
Not used (spare)
32
10A
Airbag module
33
10A
Trailer brake logic
34
5A
Not used (spare)
35
10A
Rear park assist, 4x4, rear video
camera, 2nd row heated seats
36
5A
Passive anti-theft system
37
10A
Climate control
Fuses
293
2013 Expedition
(exd)
Owners Guide gf, 2nd Printing, October 2012
USA
(fus)
Fuse or relay
location
Fuse amp
rating
Protected circuits
38
20A
Subwoofer
39
20A
Radio
40
20A
Navigation amplifier
41
15A
Power windows, Power vents,
Power moonroof, Auto dimming
rear view mirror, 110 volt AC
power point
42
10A
Not used (spare)
43
10A
Rear wiper logic, Rain sensor
44
10A
Trailer tow battery charge relay
coil
45
5A
Front wiper logic
46
7.5A
Climate control, Auxiliary relay
control
47
30A Circuit
Breaker
Power windows, Moonroof
48
Delayed accessory relay
294
Fuses
2013 Expedition
(exd)
Owners Guide gf, 2nd Printing, October 2012
USA
(fus)