Ford Escort - 2003 Fuse Box Diagram

Ford Escort - 2003 Fuse Box Diagram

Starting auto memory tuning
1. Select a frequency using the AM/FM control.
2. Press and momentarily hold the
AUTO M (auto memory) control.
3. The audio system will select the
five strongest stations on the frequency band. When the stations are
filled, the station stored in memory preset control 1 will start playing.
Press the AUTO M control to recall stations in the auto memory. One
station will be selected each time you press the AUTO M control and the
auto memory number will be displayed.
NOTE:
If the power supply is interrupted (the fuse blows or the battery
is disconnected), the preset channels will be canceled.
Random play
The random play feature works in
CD mode and plays the selections
on the current CD in random order.
Random play in CD mode
Press the RDM control during play. RDM will illuminate in the display.
The next selection will be randomly selected.
To disengage random play, press the RDM control again.
Repeat play
The repeat play feature works in CD
mode and repeats the current CD
selection.
Repeat play in CD mode
Press the RPT control during play. RPT will illuminate in the display.
The current selection will be repeated.
To disengage repeat play, press the RPT control again.
AUTO
M
RDM
2
RPT
3
Entertainment Systems
24
Eject function
Press the control to stop and eject a
CD.
Setting the clock
Ensure that the ignition is in the
ACC or ON position.
Press and momentarily hold the
CLOCK control until a beep is
heard. The current time will flash
in the display.
Press the
to increase the hours.
Press the
to increase the minutes.
Press the CLOCK control again when the desired time is set to
activate the clock.
NOTE:
If the power supply to the unit is interrupted (if the fuse blows
or the vehicle’s battery is disconnected), the clock will need to be reset.
NOTE:
If the time is not adjusted while the clock’s current time is
flashing (if neither
or
is pressed), and the CLOCK control is
pressed a second time, the minutes will be set to 00. If the current time
setting is within the first half of the hour (01–29), the hour setting will
automatically reverse one hour. For example, if the original setting is
3:24, the time will change to 3:00. If the clock’s current time setting is
within the latter part of the hour (from 30 to 59 minutes), the hour
setting will automatically advance one hour. For example, if the original
setting is 3:45, the time will change to 4:00.
Changing the display mode
Press the CLOCK control to
alternate the display between time
and audio.
NOTE:
If audio operation is selected while the time mode is on, the
selected audio mode will be displayed for 10 seconds, then the display
will revert to the time mode.
+
CLOCK
H
M
TUNE
SEEK
TRACK
CLOCK
Entertainment Systems
25
Never place your arm over the air bag module as a deploying air
bag can result in serious arm fractures or other injuries.
To properly position yourself away from the air bag:
Move your seat to the rear as far as you can while still reaching the
pedals comfortably.
Recline the seat slightly one or two degrees from the upright position.
Do not put anything on or over the air bag module. Placing
objects on or over the air bag inflation area may cause those
objects to be propelled by the air bag into your face and torso causing
serious injury.
Do not attempt to service, repair, or modify the air bag
supplemental restraint systems or its fuses. See your Ford or
Lincoln Mercury dealer.
Modifying or adding equipment to the front end of the vehicle
(including frame, bumper, front end body structure and tow
hooks) may affect the performance of the air bag system, increasing
the risk of injury. Do not modify the front end of the vehicle.
Seating and Safety Restraints
70
pedal is depressed. If you cannot move the gearshift lever out of P
(Park) with the brake pedal depressed:
1. Continue depressing the brake
pedal, and remove the shift-lock
override cap with a 2.5 cm (1 inch)
or longer screwdriver.
2. Insert the screwdriver into the
shift-lock override opening and push
down.
3. Push and hold the thumb button.
4. Move the gearshift lever.
If it is necessary to use the above
procedure to move the gearshift
lever, it is possible that a fuse has
blown and the vehicle’s brakelamps
may not be operating properly.
Refer to
Fuses and relays
in the
Roadside emergencies
chapter.
Do not drive your vehicle until you verify that the brakelamps
are working.
If your vehicle gets stuck in mud or snow it may be rocked out by
shifting from forward and reverse gears, stopping between shifts, in a
steady pattern. Press lightly on the accelerator in each gear.
Do not rock the vehicle for more than a few minutes. The
transaxle and tires may be damaged or the engine may overheat.
P
R
N
D
D
L
P
R
N
D
D
L
Driving
92
The fuel pump shut-off switch is
located in the driver’s foot well,
behind the kick panel.
Use the following procedure to reset the fuel pump shut-off switch.
1. Turn the ignition to the OFF position.
2. Check the fuel system for leaks.
3. If no fuel leak is apparent, reset the fuel pump shut-off switch by
pushing in on the reset button.
4. Turn the ignition to the ON position. Pause for a few seconds and
return the key to the OFF position.
5. Make a further check for leaks in the fuel system.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
15
Roadside Emergencies
105
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
70A
Tan
Brown
80A
Natural
Black
Roadside Emergencies
106
Passenger compartment fuse panel
The fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
DRL
10A
Daytime Running Lamps (DRL)
HAZARD
15A
Hazard flasher
ROOM
10A
Engine controls, RAP system,
Radio, Shift lock, Courtesy lamps,
Starting system, Warning chime,
Instrument cluster
ENGINE
15A
Electronic automatic transaxle,
Ignition system, Constant control
relay module (PCM relay)
RADIO
5A
Power mirrors, Radio, RAP system
DOOR LOCK
30A
Power door locks
HORN
15A
Horn, Shift lock
AIR COND
15A
A/C-heater, ABS
METER
10A
Backup lamps, Engine coolant
level switch, Instrument cluster,
Rear window defrost, Shift lock,
Warning chime, Turn signal switch
(DRL)
(DOOR LK)
STOP
HAZARD
HORN
TAIL
ROOM
(AIR COND)
(SUN ROOF)
ENGINE
METER
(ASC)
RADIO
WIPER
P. Window (C.B.)
(FOG)
CIGAR
(AUDIO)
AIR BAG
FUEL INJ
HEATER
Roadside Emergencies
107
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
WIPER
20A
Wiper/Washer, Blower motor relay
STOP
20A
Stop lamps, Brake pressure switch
TAIL
15A
Exterior lamps, Instrument
illumination
SUN ROOF
15A
Power moonroof
ASC
10A
Speed control
P. WINDOW
30A CB
Power windows
CIGAR
20A
Cigar lighter
AIR BAG
10A
Air bags
FOG
10A
Fog lamps, DRL
AUDIO
15A
Premium sound amplifier, CD
changer
FUEL INJ.
10A
H02S, Evaporative emission purge
flow sensor
BLOWER
30A CB
Blower motor relay
Power distribution box
The power distribution box is located in the engine compartment. The
power distribution box contains high-current fuses that protect your
vehicle’s main electrical systems from overloads.
Always disconnect the battery before servicing high current
fuses.
Always replace the cover to the power distribution box before
reconnecting the battery or refilling fluid reservoirs
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and specifications
chapter.
Roadside Emergencies
108
The high-current fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
FUEL INJ.
30A*
Air bags, Constant control relay
module (PCM relay), Generator
DEFOG
30A*
Rear window defrost
MAIN
100A*
Overall circuit protection
BTN
40A*
Hazard, Stop, Door lock, Tail,
Room and Horn fuses of the I/P
fuse panel
ABS
60A*
Anti-lock Brake System (ABS)
main relay
COOLING FAN
40A*
Constant control relay module
(cooling fan)
OBD-II
10A*
Data Link Connector (DLC),
Instrument cluster
FUEL PUMP
20A**
Constant control relay module
(fuel pump)
HEAD RH
10A**
Headlamps
HEAD LH
10A**
Headlamps
* Fuse Link Cartridge **Fuse
USE THE DESIGNATED FUSES ONLY
FUEL INJ
30A
DEFOG
30A
MAIN
100A
COOLING FAN
40A
(ABS)
60A
BTN
40A
HEADLAMP
RELAY
FUEL PUMP 20A
OBD-II 10A
HEAD RH 10A
HEAD LH 10A
Roadside Emergencies
109