Ford Escape Hybrid - 2009 Fuse Box Diagram

Ford Escape Hybrid - 2009 Fuse Box Diagram

The sliding tray and inside bin can
be hooked on the side or rear of the
console for extra storage.
AUXILIARY POWER POINT (12V)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
The auxiliary power point is located
in the instrument panel.
A second auxiliary power point is
located on the rear side of the
center console.
Do not use the power point for
operating the cigarette lighter
element (if equipped).
To prevent the fuse from being
blown, do not use the power
point(s) over the vehicle capacity of 12 VDC/180W. If the power point or
cigar lighter socket is not working, a fuse may have blown. Refer to
Fuses and relays
in the
Roadside Emergencies
chapter for information
on checking and replacing fuses.
To have full capacity usage of your power point, the engine is required to
be running to avoid unintentional discharge of the battery. To prevent
the battery from being discharged:
do not use the power point longer than necessary when the engine is
not running,
do not leave battery chargers, video game adapters, computers and
other devices plugged in overnight or when the vehicle is parked for
extended periods.
Always keep the power point caps closed when not being used.
2009 Escape Hybrid
(ehv)
Owners Guide, 1st Printing
USA
(fus)
Driver Controls
65
WARNING:
Never place your arm over the airbag module as a
deploying airbag can result in serious arm fractures or other
injuries.
To properly position yourself away from the airbag:
Move your seat to the rear as far as you can while still reaching the
pedals comfortably.
Recline the seat slightly one or two degrees from the upright position.
WARNING:
Do not put anything on or over the airbag module.
Placing objects on or over the airbag inflation area may cause
those objects to be propelled by the airbag into your face and torso
causing serious injury.
WARNING:
Do not attempt to service, repair, or modify the
airbag supplemental restraint systems or its fuses. See your
authorized dealer.
WARNING:
Modifications to the front end of the vehicle,
including frame, bumper, front end body structure, tow hooks
and B-pillar surrounding parts may affect the performance of the
airbag sensors increasing the risk of injury. Do not modify the front
end of the vehicle.
WARNING:
Additional equipment may affect the performance of
the airbag sensors increasing the risk of injury. Please refer to
the
Body Builders Layout Book
for instructions about the appropriate
installation of additional equipment.
2009 Escape Hybrid
(ehv)
Owners Guide, 1st Printing
USA
(fus)
Seating and Safety Restraints
133
WARNING:
Do not attempt to service, repair, or modify the
airbag SRS, its fuses or the seat cover on a seat containing an
airbag. See an authorized dealer.
WARNING:
All occupants of the vehicle should always wear
their safety belts even when an airbag SRS is provided.
How does the side airbag system work?
The design and development of the
side airbag system included
recommended testing procedures
that were developed by a group of
automotive safety experts known as
the Side Airbag Technical Working
Group. These recommended testing
procedures help reduce the risk of
injuries related to the deployment of
side airbags.
The side airbag system consists of
the following:
An inflatable nylon bag (airbag)
with a gas generator concealed
behind the outboard bolster of
the driver and front passenger
seatbacks.
A special seat cover designed to allow airbag deployment.
The same warning light, electronic control and diagnostic unit as used
for the front airbags.
Two crash sensors located on the lower portion of the b-pillar (one on
each side of the vehicle).
Side airbags, in combination with safety belts, can help reduce the risk of
severe injuries in the event of a significant side impact collision.
The side airbags are fitted on the outboard side of the seatbacks of the
front seats. In certain lateral collisions, the airbag on the side affected by
the collision will be inflated. If the front passenger sensing system
detects an empty seat, the front passenger seat-mounted side airbag will
be deactivated. The airbag was designed to inflate between the door
panel and occupant to further enhance the protection provided
occupants in side impact collisions.
2009 Escape Hybrid
(ehv)
Owners Guide, 1st Printing
USA
(fus)
Seating and Safety Restraints
142
Safety Canopy
³
system
WARNING:
Do not place
objects or mount equipment
on or near the headliner at the
siderail that may come into
contact with a deploying Safety
Canopy
±
. Failure to follow these
instructions may increase the risk
of personal injury in the event of a
collision.
WARNING:
Do not lean your head on the door. The Safety
Canopy
±
could injure you as it deploys from the headliner.
WARNING:
Do not attempt to service, repair, or modify the
Safety Canopy
±
system, its fuses, the A, B, or C pillar trim, or
the headliner on a vehicle containing a Safety Canopy
±
. See your
authorized dealer.
WARNING:
All occupants of the vehicle including the driver
should always wear their safety belts even when an airbag SRS
and Safety Canopy
±
system is provided.
WARNING:
To reduce risk of injury, do not obstruct or place
objects in the deployment path of the inflatable Safety Canopy
±
.
2009 Escape Hybrid
(ehv)
Owners Guide, 1st Printing
USA
(fus)
Seating and Safety Restraints
144
WARNING:
Loaded vehicles, with a higher center of gravity,
may handle differently than unloaded vehicles. Do not overload
your vehicle and use extra precautions, such as driving at slower
speeds, avoiding abrupt steering changes and allowing for increased
stopping distance, when driving a heavily loaded vehicle. Over-loading
or loading the vehicle improperly can deteriorate handling capability
and contribute to loss of vehicle control and vehicle rollover.
AUTOMATIC TRANSMISSION OPERATION
Brake-shift interlock
This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the on position unless brake pedal is depressed.
If you cannot move the gearshift lever out of P (Park) with ignition in
the on position and the brake pedal depressed, it is possible that a fuse
has blown or the vehicle’s brake lamps are not operating properly. Refer
to
Fuses and relays
in the
Roadside Emergencies
chapter.
If the fuse is not blown, perform the following procedure:
1. Apply the parking brake.
2. Using a screwdriver or similar
tool, carefully pry out the small
Brake Transmission Shift Interlock
(BTSI) cover cap located to the
right of the gearshift lever.
3. Depress the brake pedal and then
start the vehicle.
4. Insert a screwdriver or similar
tool straight down into the access
hole and press downward while
pulling the gearshift lever out of the
P (Park) position and into the N
(Neutral) position.
5. Remove tool and reinstall BTSI
cover cap.
6. Release the parking brake and
drive normally.
2009 Escape Hybrid
(ehv)
Owners Guide, 1st Printing
USA
(fus)
Driving
212
If you see or smell fuel, do not reset the fuel pump shut-off or try to start
your vehicle; you could injure yourself or others. Have all the passengers
get out of the vehicle and call the local fire department or a towing service.
FUSES AND RELAYS
Fuses
If electrical components in the vehicle
are not working, a fuse may have
blown. Blown fuses are identified by a
broken wire within the fuse. Check
the appropriate fuses before replacing
any electrical components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
Yellow
70A
Tan
Brown
80A
Natural
Black
Black
15
2009 Escape Hybrid
(ehv)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
228
Passenger compartment fuse panel
The fuse panel is located on the
right-hand side of the center
console, by the instrument panel.
Remove the panel cover to access
the fuse cover. Press the tabs on the
top and bottom of the fuse cover to
remove.
The fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
1
30A
110V inverter
2
15A
Brake On/Off switch
3
15A
Sync module
2009 Escape Hybrid
(ehv)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
229
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
4
30A
Moon roof
5
10A
Brake Shift Interlock (BSI),
SPDJB, Keypad illumination
6
20A
Turn signals, Stop lamps
7
10A
Low beam headlamps (left)
8
10A
Low beam headlamps (right)
9
15A
Interior lights
10
15A
Backlighting
11
10A
Four wheel drive
12
7.5A
Power mirror switch
13
5A
Not used (spare)
14
10A
FCIM (radio buttons), Satellite
radio, Front display module
15
10A
Climate control
16
15A
Not used (spare)
17
20A
All lock motor feeds, Liftgate
release, Liftglass release
18
20A
Heated seat
19
25A
Rear wiper
20
15A
Datalink
21
15A
Fog lamps
22
15A
Park lamps
23
15A
High beam headlamps
24
20A
Horn relay
25
10A
Demand lamps
26
10A
Instrument panel cluster
27
20A
Ignition switch
28
5A
Radio
29
5A
Instrument panel cluster
30
5A
Not used (spare)
31
10A
Restraints control module
2009 Escape Hybrid
(ehv)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
230
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
32
10A
Not used (spare)
33
10A
Not used (spare)
34
5A
Not used (spare)
35
10A
Four wheel drive, EPAS
(steering), 110V inverter module,
Park aid module
36
5A
PATS transceiver
37
10A
Climate control
38
20A
Subwoofer/Amp (Audiophile
radio)
39
20A
Radio, Radio amplifier
(navigation)
40
20A
Front power point
41
15A
Driver/passenger door lock
switches, Auto dimming mirror,
Compass, Ambient lighting, Moon
roof
42
10A
Not used (spare)
43
10A
Rear wiper logic, Heated seats
relay, Instrument cluster
44
10A
Not used (spare)
45
5A
Front wiper logic, Blower motor
relay
46
7.5A
OCS (restraints), PADI
(restraints)
47
30A Circuit
Breaker
Power windows
48
Delayed accessory relay
Power distribution box
The power distribution box is located in the engine compartment. The
power distribution box contains high-current fuses that protect your
vehicle’s main electrical systems from overloads.
2009 Escape Hybrid
(ehv)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
231
WARNING:
Always disconnect the low voltage (underhood)
battery before servicing high current fuses.
WARNING:
To reduce risk of electrical shock, always replace
the cover to the power distribution box before reconnecting the
low voltage (underhood) battery or refilling fluid reservoirs.
If the low voltage (underhood) battery has been disconnected and
reconnected, refer to the
Low voltage (underhood) battery
section of
the
Maintenance and Specifications
chapter.
The fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
A
80A Midi
Power steering control module
B
125A Midi
SPDJB
1
15A*
Heated mirror
2
30A**
Rear defroster
3
20A**
Rear power point
4
40A**
Electric vacuum pump
5
10A*
Powertrain Control Module (PCM)
Keep Alive power, PCM relay,
Transmission control module,
Canister vent
2009 Escape Hybrid
(ehv)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
232
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
6
Not used
7
15A*
Liftgate latch
8
5A*
Traction battery control module
9
50A**
Brake control module
10
30A**
Front wipers
11
Not used
12
40A**
Blower motor
13
10A*
A/C clutch
14
10A*
Heater/Coolant pump
15
50A**
Traction Battery Control Module
(TBCM)
16
40A**
Cooling fan 1
17
40A**
Cooling fan 2
18
50A**
Brake control module solenoid
19
30A**
Power seats
20
A/C clutch relay
21A
Rear defroster relay
21B
Ignition relay
21C
Blower relay
21D
PCM relay
22
15A*
Ignition coils
23
15A*
Fuel injectors
24
10A*
Transmission control module
25
5A*
Traction battery control module,
Thermal expansion valve
26
20A*
Fuel pump, Traction battery
control module
27
10A*
PCM (non-mil-malfunction
indicator lamp)
28
15A*
Heated Exhaust Gas Oxygen
(HEGO) sensor, PCM (mil-on —
malfunction indicator lamp)
2009 Escape Hybrid
(ehv)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
233
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
29
15A*
PCM power
30A
Cooling fan 1 relay
30B
Electric vacuum pump mechanical
relay
30C
Cooling fan main relay
30D
Cooling fan 2 relay
31A
Reverse lamp relay
31B
Not used
31C
Heater pump relay
31D
Coolant pump relay
31E
Not used
31F
Liftgate latch relay
32
A/C clutch diode
33
PCM diode
34
Not used
35
10A*
Run/start, Reverse lamps
36
Not used
37
Not used
* Mini fuse ** Cartridge fuse
2009 Escape Hybrid
(ehv)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
234
Auxiliary relay box
The relay box is located in the engine compartment on the radiator
support bracket.
Fuse/Relay
location
Fuse amp
rating
Description
Relay
Electric vacuum pump (solid state)
1
Not used
2
Not used
3
Not used
4
5A*
Vacuum pump monitor
6
Not used
* Mini fuses **Cartridge fuse
2009 Escape Hybrid
(ehv)
Owners Guide, 1st Printing
USA
(fus)
Roadside Emergencies
235