Ford Escape - 2010 Fuse Box Diagram

Ford Escape - 2010 Fuse Box Diagram

5. Small storage trays and (if equipped) an ambient light control switch.
WARNING:
Use only soft cups in the cupholders. Hard objects
can injure you in a collision.
The tray and inside bin can be
removed to open up space to fit a
laptop computer, MP3 players, CDs
or handbags. To remove, open the
console lid and pull the bin straight
up and out from the console
housing.
The sliding tray and inside bin can
be hooked on the side or rear of the
console for extra storage.
AUXILIARY POWER POINT (12VDC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
Auxiliary power points can be found in the following locations:
On the instrument panel
On the rear side of the center console
Do not use the power point for operating the cigarette lighter element (if
equipped).
Driver Controls
70
2010 Escape
(204)
Owners Guide, 1st Printing
USA
(fus)
To prevent the fuse from being blown, do not use the power point(s)
over the vehicle capacity of 12 VDC/180W. If the power point or cigar
lighter socket is not working, a fuse may have blown. Refer to
Fuses and
relays
in the
Roadside Emergencies
chapter for information on
checking and replacing fuses.
To have full capacity usage of your power point, the engine is required to
be running to avoid unintentional discharge of the battery. To prevent
the battery from being discharged:
do not use the power point longer than necessary when the engine is
not running,
do not leave battery chargers, video game adapters, computers and
other devices plugged in overnight or when the vehicle is parked for
extended periods.
Always keep the power point caps closed when not being used.
POWER WINDOWS (IF EQUIPPED)
WARNING:
Do not leave children unattended in the vehicle and
do not let children play with the power windows. They may
seriously injure themselves.
WARNING:
When closing the power windows, you should verify
they are free of obstructions and ensure that children and/or
pets are not in the proximity of the window openings.
Press and pull the window switches
to open and close windows.
Press down (to the first detent)
and hold the switch to open.
Pull up and hold the switch to
close.
Rear window buffeting:
When one or both of the rear windows are
open, the vehicle may demonstrate a wind throb or buffeting noise; this
noise can be alleviated by lowering a front window approximately two to
three inches.
Driver Controls
71
2010 Escape
(204)
Owners Guide, 1st Printing
USA
(fus)
WARNING:
Never place your arm over the airbag module as a
deploying airbag can result in serious arm fractures or other
injuries.
To properly position yourself away from the airbag:
Move your seat to the rear as far as you can while still reaching the
pedals comfortably.
Recline the seat slightly one or two degrees from the upright position.
WARNING:
Do not put anything on or over the airbag module.
Placing objects on or over the airbag inflation area may cause
those objects to be propelled by the airbag into your face and torso
causing serious injury.
WARNING:
Do not attempt to service, repair, or modify the
airbag supplemental restraint systems or its fuses. Contact your
authorized dealer as soon as possible.
WARNING:
Modifications to the front end of the vehicle,
including frame, bumper, front end body structure, tow hooks
and B-pillar surrounding parts may affect the performance of the
airbag sensors increasing the risk of injury. Do not modify the front
end of the vehicle.
WARNING:
Additional equipment may affect the performance of
the airbag sensors increasing the risk of injury.
Seating and Safety Restraints
138
2010 Escape
(204)
Owners Guide, 1st Printing
USA
(fus)
A difficulty with the system is indicated by one or more of the following:
The readiness light will either
flash or stay lit.
The readiness light will not
illuminate immediately after
ignition is turned on.
A series of five beeps will be heard. The tone pattern will repeat
periodically until the problem and/or light are repaired.
If any of these things happen, even intermittently, have the SRS serviced
at an authorized dealer immediately. Unless serviced, the system may not
function properly in the event of a collision.
Seat-mounted side airbag system
WARNING:
Do not place objects or mount equipment on or
near the airbag cover on the side of the seatbacks of the front
seats or in front seat areas that may come into contact with a
deploying airbag. Failure to follow these instructions may increase the
risk of personal injury in the event of a collision.
WARNING:
Do not use accessory seat covers. The use of
accessory seat covers may prevent the deployment of the side
airbags and increase the risk of injury in an accident.
WARNING:
Do not lean your head on the door. The side airbag
could injure you as it deploys from the side of the seatback.
WARNING:
Do not attempt to service, repair, or modify the
airbag SRS, its fuses or the seat cover on a seat containing an
airbag. See an authorized dealer.
WARNING:
All occupants of the vehicle should always wear
their safety belts even when an airbag SRS is provided.
Seating and Safety Restraints
146
2010 Escape
(204)
Owners Guide, 1st Printing
USA
(fus)
Safety Canopy
³
System
WARNING:
Do not place
objects or mount equipment
on or near the headliner at the
siderail that may come into
contact with a deploying Safety
Canopy
±
. Failure to follow these
instructions may increase the risk
of personal injury in the event of a
collision.
WARNING:
Do not lean your head on the door. The Safety
Canopy
±
could injure you as it deploys from the headliner.
WARNING:
Do not attempt to service, repair, or modify the
Safety Canopy
±
System, its fuses, the A, B, or C pillar trim, or
the headliner on a vehicle containing a Safety Canopy
±
. Contact your
authorized dealer as soon as possible.
WARNING:
All occupants of the vehicle including the driver
should always wear their safety belts even when an airbag SRS
and Safety Canopy
±
System is provided.
WARNING:
To reduce risk of injury, do not obstruct or place
objects in the deployment path of the inflatable Safety Canopy
±
.
Seating and Safety Restraints
149
2010 Escape
(204)
Owners Guide, 1st Printing
USA
(fus)
WARNING:
In a rollover crash, an unbelted person is
significantly more likely to die than a person wearing a seat belt.
Utility vehicles and trucks have larger tires and increased ground
clearance, giving the vehicle a higher center of gravity than a passenger
car.
WARNING:
Vehicles with a higher center of gravity such as
utility vehicles and trucks handle differently than vehicles with a
lower center of gravity. Utility vehicles and trucks are
not
designed for
cornering at speeds as high as passenger cars any more than low-slung
sports cars are designed to perform satisfactorily under off-road
conditions. Avoid sharp turns, excessive speed or abrupt maneuvers in
these vehicles. Failure to drive cautiously could result in an increased
risk of loss of vehicle control, vehicle rollover, personal injury and
death.
WARNING:
Loaded vehicles, with a higher center of gravity,
may handle differently than unloaded vehicles. Do not overload
your vehicle and use extra precautions, such as driving at slower
speeds, avoiding abrupt steering changes and allowing for increased
stopping distance, when driving a heavily loaded vehicle. Over-loading
or loading the vehicle improperly can deteriorate handling capability
and contribute to loss of vehicle control and vehicle rollover.
BRAKE-SHIFT INTERLOCK
This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the on position unless brake pedal is pressed.
If you cannot move the gearshift lever out of P (Park) with ignition in
the on position and the brake pedal pressed, it is possible that a fuse has
blown or the vehicle’s brake lamps are not operating properly. Refer to
Fuses and relays
in the
Roadside Emergencies
chapter.
If the fuse is not blown, perform the following procedure:
1. Apply the parking brake, turn the ignition to off, then remove the key.
Driving
223
2010 Escape
(204)
Owners Guide, 1st Printing
USA
(fus)
Note:
With extended use, the flasher may run down your battery.
FUEL PUMP SHUT-OFF SWITCH
This device stops the electric fuel pump from sending fuel to the engine
when your vehicle has had a substantial jolt.
After an accident, if the engine cranks but does not start, this switch
may have been activated.
This switch is located in the front
passenger’s footwell, behind a
flip-up cover, by the kick panel
access cover.
To reset the switch:
1. Turn the ignition to the off
position.
2. Check the fuel system for leaks.
3. If no leaks are apparent, reset the
switch by pushing in on the reset
button.
4. Turn the ignition to the on
position.
5. Wait a few seconds and return
the key to the off position.
6. Make another check for leaks.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
15
Roadside Emergencies
248
2010 Escape
(204)
Owners Guide, 1st Printing
USA
(fus)
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
Yellow
70A
Tan
Brown
80A
Natural
Black
Black
Passenger compartment fuse panel
The fuse panel is located on the
right-hand side of the center
console, by the instrument panel.
Remove the panel cover to access
the fuse cover. Press the tabs on the
top and bottom of the fuse cover to
remove.
Roadside Emergencies
249
2010 Escape
(204)
Owners Guide, 1st Printing
USA
(fus)
The fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
1
30A
Not used (spare)
2
15A
Brake on/off switch
3
15A
SYNC
±
module
4
30A
Moon roof
5
10A
Keypad illumination, Brake shift
interlock (BSI), Passenger
compartment fuse panel
6
20A
Turn signals, Stop lamps
7
10A
Low beam headlamps (left)
8
10A
Low beam headlamps (right)
9
15A
Interior lights
10
15A
Backlighting
11
10A
Four wheel drive
12
7.5A
Power mirror switch
13
5A
Not used (spare)
14
10A
FCIM (radio buttons), Front
display module, GPS module
Roadside Emergencies
250
2010 Escape
(204)
Owners Guide, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
15
10A
Climate control
16
15A
Not used (spare)
17
20A
All lock motor feeds, Liftgate
release, Liftglass release
18
20A
Heated seat
19
25A
Rear wiper
20
15A
Datalink
21
15A
Fog lamps
22
15A
Park lamps
23
15A
High beam headlamps
24
20A
Horn relay
25
10A
Demand lamps
26
10A
Instrument panel cluster
27
20A
Ignition switch
28
5A
Radio
29
5A
Instrument panel cluster
30
5A
Not used (spare)
31
10A
Restraints control module
32
10A
Rear video camera module
33
10A
Not used (spare)
34
5A
Not used (spare)
35
10A
Four wheel drive, Electric power
assist steering (EPAS), Park aid
module, Active park assist module
36
5A
Passive anti-theft system (PATS)
transceiver
37
10A
Climate control
38
20A
Subwoofer/Amp (premium radio)
39
20A
Radio, Radio amplifier (navigation
only)
40
20A
Front power point
Roadside Emergencies
251
2010 Escape
(204)
Owners Guide, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
41
15A
Driver/passenger door lock
switches, Automatic dimming
mirror, Compass, Ambient
lighting, Moon roof, Camera
display in mirror
42
10A
Not used (spare)
43
10A
Rear wiper logic, Heated seats
relay, Instrument cluster
44
10A
Not used (spare)
45
5A
Front wiper logic, Blower motor
relay
46
7.5A
Occupant classification system
(OCS), Passenger airbag
deactivation indicator (PADI)
47
30A Circuit
Breaker
Power windows
48
Delayed accessory relay
Power distribution box
The power distribution box is
located in the engine compartment.
The power distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
from overloads.
WARNING:
Always disconnect the battery before servicing high
current fuses.
Roadside Emergencies
252
2010 Escape
(204)
Owners Guide, 1st Printing
USA
(fus)
WARNING:
To reduce risk of electrical shock, always replace
the cover to the Power Distribution Box before reconnecting the
battery or refilling fluid reservoirs.
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and Specifications
chapter.
The high-current fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
A
80A Midi
Electronic power steering module
(EPAS)
B
125A Midi
Passenger compartment fuse
panel
1
15A*
Heated mirror
2
30A**
Rear defroster
3
20A**
Rear power point (center console)
4
Not used
5
10A*
Powertrain control module (PCM)
– keep alive power, PCM relay,
Canister vent
6
15A*
Alternator
7
15A*
Liftgate latch
Roadside Emergencies
253
2010 Escape
(204)
Owners Guide, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
8
20A*
Trailer tow parking lamps
9
50A**
Anti-lock brake system (ABS)
10
30A**
Front wipers
11
30A**
Starter
12
40A**
Blower motor
13
10A*
A/C clutch
14
15A*
Trailer tow turn lamps
15
Not used
16
40A**
Cooling fan 1
17
40A**
Cooling fan 2
18
20A**
ABS solenoid
19
30A**
Power seats
20
A/C clutch relay
21A
Rear defroster relay
21B
Fuel relay
21C
Blower relay
21D
PCM relay
22
20A*
Fuel pump
23
15A*
Fuel injectors
24
Not used
25
5A*
ABS
26
15A*
Ignition coils
27
10A*
PCM – general powertrain
components malfunction indicator
lamp
28
20A*
PCM – emission related
powertrain components
malfunction indicator lamp
29
15A*
PCM
30A
Cooling fan 1 relay
30B
Starter relay
30C
Cooling fan main relay
Roadside Emergencies
254
2010 Escape
(204)
Owners Guide, 1st Printing
USA
(fus)
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
30D
Cooling fan 2 relay
31A
Reverse lamp relay
31B
Not used
31C
Trailer tow left turn relay
31D
Trailer tow right turn relay
31E
Trailer tow park relay
31F
Liftgate latch relay
32
Not used
33
PCM diode
34
Start diode
35
10A*
Run/start, Reverse lamps, Rear
defrost relay
36
Not used
* Mini fuse ** Cartridge fuse
CHANGING A FLAT TIRE
If you get a flat tire while driving:
do not brake heavily.
gradually decrease the vehicle’s speed.
hold the steering wheel firmly.
slowly move to a safe place on the side of the road.
Your vehicle may be equipped with a conventional spare tire that is
different in one or more of the following: type, brand, size, speed rating
and tread design. If this is the case, this dissimilar spare tire is still rated
for your vehicle loads (GAWR and GVWR). This temporary spare tire is
not equipped with a tire pressure monitor system (TPMS) sensor.
Note:
The tire pressure monitoring system (TPMS) indicator light will
illuminate when the spare is in use. To restore the full functionality of
the TPMS system, all road wheels equipped with the tire pressure
monitoring sensors must be mounted on the vehicle.
Have a flat tire serviced by an authorized dealer in order to prevent
damage to the TPMS sensor, refer to
Tire pressure monitoring system
(TPMS)
in the
Tires, Wheels, and Loading
chapter. Replace the spare
tire with a road tire as soon as possible. During repairing or replacing of
the flat tire, have the authorized dealer inspect the TPMS sensor for
damage.
Roadside Emergencies
255
2010 Escape
(204)
Owners Guide, 1st Printing
USA
(fus)
5. Small storage trays and (if equipped) an ambient light control switch.
WARNING:
Use only soft cups in the cupholders. Hard objects
can injure you in a collision.
The tray and inside bin can be
removed to open up space to fit a
laptop computer, MP3 players, CDs
or handbags. To remove, open the
console lid and pull the bin straight
up and out from the console
housing.
The sliding tray and inside bin can
be hooked on the side or rear of the
console for extra storage.
AUXILIARY POWER POINT (12VDC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
Auxiliary power points can be found in the following locations:
On the instrument panel
On the rear side of the center console
Do not use the power point for operating the cigarette lighter element (if
equipped).
Driver Controls
70
To prevent the fuse from being blown, do not use the power point(s)
over the vehicle capacity of 12 VDC/180W. If the power point or cigar
lighter socket is not working, a fuse may have blown. Refer to
Fuses and
relays
in the
Roadside Emergencies
chapter for information on
checking and replacing fuses.
To have full capacity usage of your power point, the engine is required to
be running to avoid unintentional discharge of the battery. To prevent
the battery from being discharged:
do not use the power point longer than necessary when the engine is
not running,
do not leave battery chargers, video game adapters, computers and
other devices plugged in overnight or when the vehicle is parked for
extended periods.
Always keep the power point caps closed when not being used.
POWER WINDOWS (IF EQUIPPED)
WARNING:
Do not leave children unattended in the vehicle and
do not let children play with the power windows. They may
seriously injure themselves.
WARNING:
When closing the power windows, you should verify
they are free of obstructions and ensure that children and/or
pets are not in the proximity of the window openings.
Press and pull the window switches
to open and close windows.
Press down (to the first detent)
and hold the switch to open.
Pull up and hold the switch to
close.
Rear window buffeting:
When one or both of the rear windows are
open, the vehicle may demonstrate a wind throb or buffeting noise; this
noise can be alleviated by lowering a front window approximately two to
three inches.
Driver Controls
71
WARNING:
All occupants of the vehicle, including the driver,
should always properly wear their safety belts, even when an air
bag supplemental restraint system (SRS) is provided.
WARNING:
When possible, all children 12 years old and under
should be properly restrained in a rear seating position.
WARNING:
The National Highway Traffic Safety Administration
(NHTSA) recommends a minimum distance of at least 10 inches
(25 cm) between an occupant’s chest and the driver airbag module.
WARNING:
Never place your arm over the airbag module as a
deploying airbag can result in serious arm fractures or other
injuries.
To properly position yourself away from the airbag:
Move your seat to the rear as far as you can while still reaching the
pedals comfortably.
Recline the seat slightly one or two degrees from the upright position.
WARNING:
Do not put anything on or over the airbag module.
Placing objects on or over the airbag inflation area may cause
those objects to be propelled by the airbag into your face and torso
causing serious injury.
WARNING:
Do not attempt to service, repair, or modify the
airbag supplemental restraint systems or its fuses. Contact your
authorized dealer as soon as possible.
WARNING:
Modifications to the front end of the vehicle,
including frame, bumper, front end body structure, tow hooks
and B-pillar surrounding parts may affect the performance of the
airbag sensors increasing the risk of injury. Do not modify the front
end of the vehicle.
WARNING:
Additional equipment may affect the performance of
the airbag sensors increasing the risk of injury.
Seating and Safety Restraints
137
A difficulty with the system is indicated by one or more of the following:
The readiness light will either
flash or stay lit.
The readiness light will not
illuminate immediately after
ignition is turned on.
A series of five beeps will be heard. The tone pattern will repeat
periodically until the problem and/or light are repaired.
If any of these things happen, even intermittently, have the SRS serviced
at an authorized dealer immediately. Unless serviced, the system may not
function properly in the event of a collision.
Seat-mounted side airbag system
WARNING:
Do not place objects or mount equipment on or
near the airbag cover on the side of the seatbacks of the front
seats or in front seat areas that may come into contact with a
deploying airbag. Failure to follow these instructions may increase the
risk of personal injury in the event of a collision.
WARNING:
Do not use accessory seat covers. The use of
accessory seat covers may prevent the deployment of the side
airbags and increase the risk of injury in an accident.
WARNING:
Do not lean your head on the door. The side airbag
could injure you as it deploys from the side of the seatback.
WARNING:
Do not attempt to service, repair, or modify the
airbag SRS, its fuses or the seat cover on a seat containing an
airbag. See an authorized dealer.
WARNING:
All occupants of the vehicle should always wear
their safety belts even when an airbag SRS is provided.
Seating and Safety Restraints
145
Safety Canopy
²
System
WARNING:
Do not place
objects or mount equipment
on or near the headliner at the
siderail that may come into
contact with a deploying Safety
Canopy
±
. Failure to follow these
instructions may increase the risk
of personal injury in the event of a
collision.
WARNING:
Do not lean your head on the door. The Safety
Canopy
±
could injure you as it deploys from the headliner.
WARNING:
Do not attempt to service, repair, or modify the
Safety Canopy
±
System, its fuses, the A, B, or C pillar trim, or
the headliner on a vehicle containing a Safety Canopy
±
. Contact your
authorized dealer as soon as possible.
WARNING:
All occupants of the vehicle including the driver
should always wear their safety belts even when an airbag SRS
and Safety Canopy
±
System is provided.
WARNING:
To reduce risk of injury, do not obstruct or place
objects in the deployment path of the inflatable Safety Canopy
±
.
Seating and Safety Restraints
148
PREPARING TO DRIVE
WARNING:
Utility vehicles have a significantly higher rollover
rate than other types of vehicles.
WARNING:
In a rollover crash, an unbelted person is
significantly more likely to die than a person wearing a seat belt.
Utility vehicles and trucks have larger tires and increased ground
clearance, giving the vehicle a higher center of gravity than a passenger
car.
WARNING:
Vehicles with a higher center of gravity such as
utility vehicles and trucks handle differently than vehicles with a
lower center of gravity. Utility vehicles and trucks are
not
designed for
cornering at speeds as high as passenger cars any more than low-slung
sports cars are designed to perform satisfactorily under off-road
conditions. Avoid sharp turns, excessive speed or abrupt maneuvers in
these vehicles. Failure to drive cautiously could result in an increased
risk of loss of vehicle control, vehicle rollover, personal injury and
death.
WARNING:
Loaded vehicles, with a higher center of gravity,
may handle differently than unloaded vehicles. Do not overload
your vehicle and use extra precautions, such as driving at slower
speeds, avoiding abrupt steering changes and allowing for increased
stopping distance, when driving a heavily loaded vehicle. Over-loading
or loading the vehicle improperly can deteriorate handling capability
and contribute to loss of vehicle control and vehicle rollover.
BRAKE-SHIFT INTERLOCK
This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the on position unless brake pedal is pressed.
If you cannot move the gearshift lever out of P (Park) with ignition in
the on position and the brake pedal pressed, it is possible that a fuse has
blown or the vehicle’s brake lamps are not operating properly. Refer to
Fuses and relays
in the
Roadside Emergencies
chapter.
Driving
222
If the fuse is not blown, perform the following procedure:
1. Apply the parking brake, turn the ignition to off, then remove the key.
2. Using a screwdriver or similar
tool, carefully pry out the small
Brake Transmission Shift Interlock
(BTSI) cover cap located to the
right of the gearshift lever.
3. Insert a screwdriver or similar
tool straight down into the access
hole and press downward while
pulling the gearshift lever out of the
P (Park) position and into the N
(Neutral) position.
4. Remove tool and reinstall the
BTSI cover cap.
5. Start the vehicle and release the
parking brake.
WARNING:
Do not drive your vehicle until you verify that the
brakelamps are working.
WARNING:
Always set the parking brake fully and make sure
the gearshift is latched in P (Park). Turn the ignition to the off
position and remove the key whenever you leave your vehicle.
WARNING:
If the parking brake is fully released, but the brake
warning lamp remains illuminated, the brakes may not be
working properly. See your authorized dealer as soon as possible.
AUTOMATIC TRANSMISSION OPERATION (IF EQUIPPED)
Automatic Transmission Adaptive Learning
Your transmission is equipped with an adaptive learning strategy found in
the vehicle computer. This feature is designed to increase durability and
Driving
223
Note:
With extended use, the flasher may run down your battery.
FUEL PUMP SHUT-OFF SWITCH
This device stops the electric fuel pump from sending fuel to the engine
when your vehicle has had a substantial jolt.
After an accident, if the engine cranks but does not start, this switch
may have been activated.
This switch is located in the front
passenger’s footwell, behind a
flip-up cover, by the kick panel
access cover.
To reset the switch:
1. Turn the ignition to the off
position.
2. Check the fuel system for leaks.
3. If no leaks are apparent, reset the
switch by pushing in on the reset
button.
4. Turn the ignition to the on
position.
5. Wait a few seconds and return
the key to the off position.
6. Make another check for leaks.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
15
Roadside Emergencies
247
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
Yellow
70A
Tan
Brown
80A
Natural
Black
Black
Passenger compartment fuse panel
The fuse panel is located on the
right-hand side of the center
console, by the instrument panel.
Remove the panel cover to access
the fuse cover. Press the tabs on the
top and bottom of the fuse cover to
remove.
Roadside Emergencies
248
The fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
1
30A
Not used (spare)
2
15A
Brake on/off switch
3
15A
SYNC
±
module
4
30A
Moon roof
5
10A
Keypad illumination, Brake shift
interlock (BSI), Passenger
compartment fuse panel
6
20A
Turn signals, Stop lamps
7
10A
Low beam headlamps (left)
8
10A
Low beam headlamps (right)
9
15A
Interior lights
10
15A
Backlighting
11
10A
Four wheel drive
12
7.5A
Power mirror switch
13
5A
Not used (spare)
14
10A
FCIM (radio buttons), Front
display module, GPS module
Roadside Emergencies
249
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
15
10A
Climate control
16
15A
Not used (spare)
17
20A
All lock motor feeds, Liftgate
release, Liftglass release
18
20A
Heated seat
19
25A
Rear wiper
20
15A
Datalink
21
15A
Fog lamps
22
15A
Park lamps
23
15A
High beam headlamps
24
20A
Horn relay
25
10A
Demand lamps
26
10A
Instrument panel cluster
27
20A
Ignition switch
28
5A
Radio
29
5A
Instrument panel cluster
30
5A
Not used (spare)
31
10A
Restraints control module
32
10A
Rear video camera module
33
10A
Not used (spare)
34
5A
Not used (spare)
35
10A
Four wheel drive, Electric power
assist steering (EPAS), Park aid
module, Active park assist module
36
5A
Passive anti-theft system (PATS)
transceiver
37
10A
Climate control
38
20A
Subwoofer/Amp (premium radio)
39
20A
Radio, Radio amplifier (navigation
only)
40
20A
Front power point
Roadside Emergencies
250
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
41
15A
Driver/passenger door lock
switches, Automatic dimming
mirror, Compass, Ambient
lighting, Moon roof, Camera
display in mirror
42
10A
Not used (spare)
43
10A
Rear wiper logic, Heated seats
relay, Instrument cluster
44
10A
Not used (spare)
45
5A
Front wiper logic, Blower motor
relay
46
7.5A
Occupant classification system
(OCS), Passenger airbag
deactivation indicator (PADI)
47
30A Circuit
Breaker
Power windows
48
Delayed accessory relay
Power distribution box
The power distribution box is
located in the engine compartment.
The power distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
from overloads.
WARNING:
Always disconnect the battery before servicing high
current fuses.
Roadside Emergencies
251
WARNING:
To reduce risk of electrical shock, always replace
the cover to the Power Distribution Box before reconnecting the
battery or refilling fluid reservoirs.
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and Specifications
chapter.
The high-current fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
A
80A Midi
Electronic power steering module
(EPAS)
B
125A Midi
Passenger compartment fuse
panel
1
15A*
Heated mirror
2
30A**
Rear defroster
3
20A**
Rear power point (center console)
4
Not used
5
10A*
Powertrain control module (PCM)
– keep alive power, PCM relay,
Canister vent
6
15A*
Alternator
7
15A*
Liftgate latch
Roadside Emergencies
252
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
8
20A*
Trailer tow parking lamps
9
50A**
Anti-lock brake system (ABS)
10
30A**
Front wipers
11
30A**
Starter
12
40A**
Blower motor
13
10A*
A/C clutch
14
15A*
Trailer tow turn lamps
15
Not used
16
40A**
Cooling fan 1
17
40A**
Cooling fan 2
18
20A**
ABS solenoid
19
30A**
Power seats
20
A/C clutch relay
21A
Rear defroster relay
21B
Fuel relay
21C
Blower relay
21D
PCM relay
22
20A*
Fuel pump
23
15A*
Fuel injectors
24
Not used
25
5A*
ABS
26
15A*
Ignition coils
27
10A*
PCM – general powertrain
components malfunction indicator
lamp
28
20A*
PCM – emission related
powertrain components
malfunction indicator lamp
29
15A*
PCM
30A
Cooling fan 1 relay
30B
Starter relay
30C
Cooling fan main relay
Roadside Emergencies
253
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
30D
Cooling fan 2 relay
31A
Reverse lamp relay
31B
Not used
31C
Trailer tow left turn relay
31D
Trailer tow right turn relay
31E
Trailer tow park relay
31F
Liftgate latch relay
32
Not used
33
PCM diode
34
Start diode
35
10A*
Run/start, Reverse lamps, Rear
defrost relay
36
Not used
* Mini fuse ** Cartridge fuse
CHANGING A FLAT TIRE
If you get a flat tire while driving:
do not brake heavily.
gradually decrease the vehicle’s speed.
hold the steering wheel firmly.
slowly move to a safe place on the side of the road.
Your vehicle may be equipped with a conventional spare tire that is
different in one or more of the following: type, brand, size, speed rating
and tread design. If this is the case, this dissimilar spare tire is still rated
for your vehicle loads (GAWR and GVWR). This temporary spare tire is
not equipped with a tire pressure monitor system (TPMS) sensor.
Note:
The tire pressure monitoring system (TPMS) indicator light will
illuminate when the spare is in use. To restore the full functionality of
the TPMS system, all road wheels equipped with the tire pressure
monitoring sensors must be mounted on the vehicle.
Have a flat tire serviced by an authorized dealer in order to prevent
damage to the TPMS sensor, refer to
Tire pressure monitoring system
(TPMS)
in the
Tires, Wheels, and Loading
chapter. Replace the spare
tire with a road tire as soon as possible. During repairing or replacing of
the flat tire, have the authorized dealer inspect the TPMS sensor for
damage.
Roadside Emergencies
254