Ford Escape - 2008 Fuse Box Diagram

Ford Escape - 2008 Fuse Box Diagram

Use only soft cups in the cupholders. Hard objects can injure
you in a collision.
The tray and inside bin can be
removed to open up space to fit a
laptop computer, MP3 players, CDs
or handbags. To remove, open the
console lid and pull the bin straight
up and out from the console
housing.
The sliding tray and inside bin can
be hooked on the side or rear of the
console for extra storage.
AUXILIARY POWER POINT (12VDC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
2008 Escape
(204)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
55
The auxiliary power point is located
in the instrument panel.
A second auxiliary power point is
located on the rear side of the
center console.
Do not use the power point for
operating the cigarette lighter
element (if equipped).
To prevent the fuse from being
blown, do not use the power
point(s) over the vehicle capacity of 12 VDC/180W. If the power point or
cigar lighter socket is not working, a fuse may have blown. Refer to
Fuses and Relays
in the
Roadside Emergencies
chapter for information
on checking and replacing fuses.
To prevent the battery from being discharged, do not use the power
point longer than necessary when the engine is not running.
Always keep the power point caps closed when not being used.
Cigar/Cigarette lighter (if equipped)
Do not plug optional electrical accessories into the cigarette lighter
socket.
Do not hold the lighter in with your hand while it is heating, this will
damage the lighter element and socket. The lighter will be released from
its heating position when it is ready to be used.
Improper use of the lighter can cause damage not covered by your
warranty.
POWER WINDOWS
Do not leave children unattended in the vehicle and do not let
children play with the power windows. They may seriously injure
themselves.
When closing the power windows, you should verify they are free
of obstructions and ensure that children and/or pets are not in
the proximity of the window openings.
2008 Escape
(204)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
56
Do not attempt to service, repair, or modify the airbag
supplemental restraint systems or its fuses. See your authorized
dealer.
Modifications to the front end of the vehicle, including frame,
bumper, front end body structure, tow hooks and B-pillar
surrounding parts may affect the performance of the airbag sensors
increasing the risk of injury. Do not modify the front end of the
vehicle.
Additional equipment may affect the performance of the airbag
sensors increasing the risk of injury. Please refer to the
Body
Builders Layout Book
for instructions about the appropriate
installation of additional equipment.
Children and airbags
Children must always be properly
restrained. Accident statistics
suggest that children are safer when
properly restrained in the rear
seating positions than in the front
seating position. Failure to follow
these instructions may increase the
risk of injury in a collision.
Airbags can kill or injure a
child in a child seat.
NEVER
place a rear-facing child
seat in front of an active airbag. If
you must use a forward-facing
child seat in the front seat, move
the seat all the way back.
2008 Escape
(204)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
118
Do not attempt to service, repair, or modify the airbag SRS, its
fuses or the seat cover on a seat containing an airbag. See an
authorized dealer.
All occupants of the vehicle should always wear their safety belts
even when an airbag SRS is provided.
How does the side airbag system work?
The design and development of the
side airbag system included
recommended testing procedures
that were developed by a group of
automotive safety experts known as
the Side Airbag Technical Working
Group. These recommended testing
procedures help reduce the risk of
injuries related to the deployment of
side airbags.
The side airbag system consists of
the following:
An inflatable nylon bag (airbag)
with a gas generator concealed
behind the outboard bolster of
the driver and front passenger
seatbacks.
A special seat cover designed to allow airbag deployment.
The same warning light, electronic control and diagnostic unit as used
for the front airbags.
Two crash sensors located on the lower portion of the b-pillar (one on
each side of the vehicle).
Side airbags, in combination with safety belts, can help reduce the risk of
severe injuries in the event of a significant side impact collision.
The side airbags are fitted on the outboard side of the seatbacks of the
front seats. In certain lateral collisions, the airbag on the side affected by
the collision will be inflated. If the front passenger sensing system
detects an empty seat, the front passenger seat-mounted side airbag will
be deactivated. The airbag was designed to inflate between the door
panel and occupant to further enhance the protection provided
occupants in side impact collisions.
2008 Escape
(204)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
126
Safety Canopy
´
system
Do not place objects or
mount equipment on or
near the headliner at the siderail
that may come into contact with a
deploying Safety Canopy
³
. Failure
to follow these instructions may
increase the risk of personal injury
in the event of a collision.
Do not lean your head on the door. The Safety Canopy
³
could
injure you as it deploys from the headliner.
Do not attempt to service, repair, or modify the Safety Canopy
³
system, its fuses, the A, B, or C pillar trim, or the headliner on a
vehicle containing a Safety Canopy
³
. See your authorized dealer.
All occupants of the vehicle including the driver should always
wear their safety belts even when an airbag SRS and Safety
Canopy
³
system is provided.
To reduce risk of injury, do not obstruct or place objects in the
deployment path of the inflatable Safety Canopy
³
.
2008 Escape
(204)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
128
AUTOMATIC TRANSMISSION OPERATION (IF EQUIPPED)
Brake-shift interlock
This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the RUN position unless brake pedal is depressed.
If you cannot move the gearshift lever out of P (Park) with ignition in
the RUN position and the brake pedal depressed, it is possible that a
fuse has blown or the vehicle’s brakelamps are not operating properly.
Refer to
Fuses and relays
in the
Roadside Emergencies
chapter.
If the fuse is not blown, perform the following procedure:
1. Apply the parking brake, turn the ignition to LOCK, then remove the
key.
2. Using a screwdriver or similar
tool, carefully pry out the small
Brake Transmission Shift Interlock
(BTSI) cover cap located to the
right of the gearshift lever.
3. Insert a screwdriver or similar
tool straight down into the access
hole and press downward while
pulling the gearshift lever out of the
P (Park) position and into the N
(Neutral) position.
4. Remove tool and reinstall the BTSI cover cap.
5. Start the vehicle and release the parking brake.
Do not drive your vehicle until you verify that the brakelamps
are working.
Always set the parking brake fully and make sure the gearshift is
latched in P (Park). Turn the ignition to the LOCK position and
remove the key whenever you leave your vehicle.
2008 Escape
(204)
Owners Guide (post-2002-fmt)
USA
(fus)
Driving
190
This switch is located in the front
passenger’s footwell, behind a
flip-up cover, by the kick panel
access cover.
To reset the switch:
1. Turn the ignition OFF.
2. Check the fuel system for leaks.
3. If no leaks are apparent, reset the
switch by pushing in on the reset
button.
4. Turn the ignition ON.
5. Wait a few seconds and return
the key to OFF.
6. Make another check for leaks.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
15
2008 Escape
(204)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
209
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
Yellow
70A
Tan
Brown
80A
Natural
Black
Black
Passenger compartment fuse panel
The fuse panel is located on the
right-hand side of the center
console, by the instrument panel.
Remove the panel cover to access
the fuse cover. Press the tabs on the
top and bottom of the fuse cover to
remove.
2008 Escape
(204)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
210
The fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
1
30A
Not used (spare)
2
15A
Brake On/Off switch
3
15A
Not used (spare)
4
30A
Not used (spare)
5
10A
Keypad illumination, Brake Shift
Interlock (BSI), SPDJB
6
20A
Turn signals, Stop lamps
7
10A
Low beam headlamps (left)
8
10A
Low beam headlamps (right)
9
15A
Interior lights
10
15A
Backlighting
11
10A
Four wheel drive
12
7.5A
Power mirror switch
13
7.5A
Canister vent
14
10A
FCIM (radio buttons), Satellite
radio, Front display module
15
10A
Climate control
2008 Escape
(204)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
211
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
16
15A
Not used (spare)
17
20A
All lock motor feeds, Liftgate
release, Liftglass release
18
20A
Heated seat
19
25A
Rear wiper
20
15A
Datalink
21
15A
Fog lamps
22
15A
Park lamps
23
15A
High beam headlamps
24
20A
Horn relay
25
10A
Demand lamps
26
10A
Instrument panel cluster
27
20A
Ignition switch
28
5A
Radio
29
5A
Instrument panel cluster
30
5A
Overdrive cancel
31
10A
Compass module
32
10A
Restraints control module
33
10A
Speed control switch
34
5A
Speed control deactivate switch,
ABS
35
10A
Four wheel drive, EPAS (steering)
36
5A
PATS transceiver
37
10A
Climate control
38
20A
Subwoofer/Amp (Audiophile radio)
39
20A
Radio
40
20A
Front power point
41
15A
Driver/passenger door lock
switches
42
10A
Not used (spare)
43
10A
Rear wiper logic, Heated seats
relay, Auto dimming mirror
2008 Escape
(204)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
212
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
44
10A
Not used (spare)
45
5A
Front wiper logic, Blower motor
relay
46
7.5A
OCS (restraints), PADI
(restraints)
47
30A Circuit
Breaker
Power windows, Moon roof
48
Delayed accessory relay
Power distribution box
The power distribution box is
located in the engine compartment.
The power distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
from overloads.
Always disconnect the battery before servicing high current
fuses.
To reduce risk of electrical shock, always replace the cover to
the Power Distribution Box before reconnecting the battery or
refilling fluid reservoirs.
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and Specifications
chapter.
2008 Escape
(204)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
213
The high-current fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
A
80A Midi
EPAS
B
125A Midi
SPDJB
1
15A*
Heated mirror
2
30A**
Rear defroster
3
20A**
Rear power point (center console)
4
20A**
Fuel pump
5
10A*
Powertrain Control Module (PCM)
Keep Alive power
6
15A*
Alternator
7
10A*
Reverse lamps
8
20A*
Trailer tow parking lamps
9
50A**
Anti-lock Brake System (ABS)
10
30A**
Front wipers
11
30A**
Starter
12
40A**
Blower motor
13
10A*
A/C clutch
14
15A*
Trailer tow turn lamps
15
Not used
16
40A**
Cooling fan 1
2008 Escape
(204)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
214
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
17
40A**
Cooling fan 2
18
20A**
ABS solenoid
19
30A**
Power seats
20
A/C clutch relay
21A
Rear defroster relay
21B
Not used
21C
Blower relay
21D
PCM relay
22
Not used
23
Not used
24
10A*
PCM transmission
25
Not used
26
10A*
PCM mil
27
10A*
PCM non-mil
28
15A*
PCM
29
15A*
Ignition coils
30A
Cooling fan 1 relay
30B
Starter relay
30C
Cooling fan main relay
30D
Cooling fan 2 relay
31A
Reverse lamp relay
31B
Fuel pump relay
31C
Trailer tow left turn relay
31D
Trailer tow right turn relay
31E
Trailer tow park relay
31F
Not used
32
A/C clutch diode
33
PCM diode
34
Start diode
35
10A*
Reverse lamp relay, Speed control
module, Rear defrost relay
2008 Escape
(204)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
215
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
36
Not used
37
Not used
* Mini fuse ** Cartridge fuse
CHANGING A FLAT TIRE
If you get a flat tire while driving:
do not brake heavily.
gradually decrease the vehicle’s speed.
hold the steering wheel firmly.
slowly move to a safe place on the side of the road.
Your vehicle may be equipped with a conventional spare tire that is
different in one or more of the following: type, brand, size, speed rating
and tread design. If this is the case, this dissimilar spare tire is still rated
for your vehicle loads (GAWR and GVWR). This temporary spare tire is
not equipped with a Tire Pressure Monitor System (TPMS) sensor.
Note:
The tire pressure monitoring system (TPMS) indicator light will
illuminate when the spare is in use. To restore the full functionality of
the TPMS system, all road wheels equipped with the tire pressure
monitoring sensors must be mounted on the vehicle.
Have a flat tire serviced by an authorized dealer in order to prevent
damage to the TPMS sensor, refer to
Tire Pressure Monitoring System
(TPMS)
in the
Tires, Wheels, and Loading
chapter. Replace the spare
tire with a road tire as soon as possible. During repairing or replacing of
the flat tire, have the authorized dealer inspect the TPMS sensor for
damage.
The use of tire sealants may damage your tires. The use of tire
sealants may also damage your Tire Pressure Monitoring System
and should not be used.
Refer to
Tire Pressure Monitoring System (TPMS)
in the
Tire,
Wheels and Loading
chapter for important information. If the
tire pressure monitor sensor becomes damaged, it will no longer
function.
2008 Escape
(204)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
216