Ford Edge - 2010 Fuse Box Diagram

Ford Edge - 2010 Fuse Box Diagram

CENTER CONSOLE (IF EQUIPPED)
Your vehicle may be equipped with a variety of console features. These
include:
1. Cupholders
2. Tissue box holder (located on
underside of console lid)
3. Rear power point
4. Utility compartment with a
clamshell tray with coin holder and
a removable divider for organizing
and storing personal items including
a laptop computer, MP3 players,
CDs or handbags and, (if equipped)
an ambient light control switch located on the front of the compartment.
WARNING:
Use only soft cups in the cupholder. Hard objects
can injure you in a collision.
AUXILIARY POWER POINT (12VDC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
Auxiliary power points can be found in the following locations:
In the instrument panel
In the center console utility compartment
On the rear side of the center console, accessible from the rear seats
On the left rear quarter panel, accessible from the liftgate or behind
the rear seat
Do not use the power point for operating the cigarette lighter element (if
equipped).
To prevent the fuse from being blown, do not use the power point(s)
over the vehicle capacity of 12 VDC/180W. If the power point or cigar
lighter socket is not working, a fuse may have blown. Refer to
Fuses and
relays
in the
Roadside Emergencies
chapter for information on
checking and replacing fuses.
Driver Controls
75
WARNING:
Never place your arm over the airbag module as a
deploying airbag can result in serious arm fractures or other
injuries.
Steps you can take to properly position yourself away from the airbag:
Move your seat to the rear as far as you can while still reaching the
pedals comfortably.
Recline the seat slightly (one or two degrees) from the upright
position.
WARNING:
Do not put anything on or over the airbag module.
Placing objects on or over the airbag inflation area may cause
those objects to be propelled by the airbag into your face and torso
causing serious injury.
WARNING:
Do not attempt to service, repair, or modify the
airbag supplemental restraint system (SRS) or its fuses. See your
authorized dealer.
WARNING:
Modifying or adding equipment to the front end of
the vehicle (including frame, bumper, front end body structure
and tow hooks) may affect the performance of the airbag system,
increasing the risk of injury. Do not modify the front end of the
vehicle.
Seating and Safety Restraints
148
WARNING:
Do not attempt to service, repair, or modify the
airbag SRS, its fuses or the seat cover on a seat containing an
airbag. Contact your authorized dealer as soon as possible.
WARNING:
All occupants of the vehicle should always wear
their safety belts even when an airbag SRS is provided.
How does the side airbag system work?
The design and development of the side airbag system included
recommended testing procedures that were developed by a group of
automotive safety experts known as the Side Airbag Technical Working
Group. These recommended testing procedures help reduce the risk of
injuries related to the deployment of side airbags.
The side airbag system consists of
the following:
An inflatable nylon bag (airbag)
with a gas generator concealed
behind the outboard bolster of
the driver and front passenger
seatbacks.
The same warning light,
electronic control and diagnostic
unit as used for the front airbags.
Two crash sensors mounted on the B pillar (one on each side of the
vehicle).
Two crash sensors located at the C pillar behind the rear doors (one
on each side of the vehicle).
Side airbags, in combination with safety belts, can help reduce the risk of
severe injuries in the event of a significant side impact collision.
The side airbags are fitted on the outboard side of the seatbacks of the
front seats. In certain lateral collisions, the airbag on the side affected by
the collision will be inflated. If the front passenger sensing system
detects an empty seat, the front passenger seat-mounted side airbag will
be deactivated. The airbag was designed to inflate between the door
panel and occupant to further enhance the protection provided
occupants in side impact collisions.
The airbag SRS is designed to activate when the vehicle sustains lateral
deceleration sufficient to cause the sensors to close an electrical circuit
that initiates airbag inflation.
Seating and Safety Restraints
157
Safety Canopy
²
system
WARNING:
Do not place
objects or mount equipment
on or near the headliner at the
siderail that may come into
contact with a deploying Safety
Canopy
±
. Failure to follow these
instructions may increase the risk
of personal injury in the event of a
collision.
WARNING:
Do not lean your head on the door. The Safety
Canopy
±
could injure you as it deploys from the headliner.
WARNING:
Do not attempt to service, repair, or modify the
Safety Canopy
±
system, its fuses, the A, B, C or D pillar trim, or
the headliner on a vehicle containing a Safety Canopy
±
. See your
authorized dealer.
WARNING:
All occupants of the vehicle including the driver
should always wear their safety belts even when an airbag SRS
and Safety Canopy
±
system is provided.
WARNING:
To reduce risk of injury, do not obstruct or place
objects in the deployment path of the inflatable Safety Canopy
±
.
Seating and Safety Restraints
159
STEERING
To help prevent damage to the power steering system:
Never hold the steering wheel at its furthest turning points (until it
stops) for more than a few seconds when the engine is running.
Do not operate the vehicle with a low power steering fluid level
(below the MIN mark on the reservoir).
Some noise is normal during operation. If the noise is excessive, check
for a low power steering fluid level before seeking service by your
authorized dealer.
Heavy or uneven steering efforts may be caused by a low power
steering fluid level. Check for a low power steering fluid level before
seeking service by your authorized dealer.
Do not fill the power steering fluid reservoir above the MAX mark on
the reservoir.
If the power steering system breaks down (or if the engine is turned
off), you can steer the vehicle manually, but it takes more effort.
If the steering wanders or pulls, check for:
an improperly inflated tire
uneven tire wear
loose or worn suspension components
loose or worn steering components
improper steering alignment
A high crown in the road or high crosswinds may also make the steering
seem to wander/pull.
BRAKE-SHIFT INTERLOCK
This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the on position unless the brake pedal is pressed.
If you cannot move the gearshift lever out of P (Park) with ignition in
the on position and the brake pedal pressed, it is possible that a fuse has
blown or the vehicle’s brakelamps are not operating properly. Refer to
Fuses and relays
in the
Roadside Emergencies
chapter.
Driving
227
If the fuse is not blown and the brakelamps are working properly, the
following procedure will allow you to move the gearshift lever from P
(Park):
1. Apply the parking brake, turn the
ignition key to the off position, and
remove the key.
2. Using a screwdriver (or similar
tool), carefully pry off and remove
the chrome trim ring (1) from the
shifter base.
3. Open the storage compartment
lid and carefully pry the trim panel
(2) up from rear attachments on the
storage compartment and disconnect it from the console.
4. Locate the brake shift interlock
lever on the passenger side of the
shifter assembly.
5. Apply the brake pedal. Using a
screwdriver (or similar tool), press
and hold the brake shift interlock
lever while pulling the gearshift
lever out of the P (Park) position
and into the N (Neutral) position.
6. Install the trim panel (2) and
chrome ring (1) in reverse order.
7. Apply brake pedal, start the vehicle, and release the parking brake.
See your authorized dealer as soon as possible if this procedure
is used.
WARNING:
Do not drive your vehicle until you verify that the
brakelamps are working.
WARNING:
Always set the parking brake fully and make sure
the gearshift is latched in P (Park). Turn the ignition to the off
position and remove the key whenever you leave your vehicle.
1
2
Driving
228
FUEL PUMP SHUT-OFF SWITCH
This device stops the electric fuel pump from sending fuel to the engine
when your vehicle has had a substantial jolt.
After an accident, if the engine cranks but does not start, this switch
may have been activated.
This switch is located behind a
panel on the left side of the cargo
area.
To reset the switch:
1. Turn the ignition to off.
2. Check the fuel system for leaks.
3. If no leaks are apparent, reset the
switch by pressing in on the reset
button.
4. Turn the ignition to on.
5. Wait a few seconds and return
the key to off.
6. Make another check for leaks.
7. If no leaks are apparent, restart
the vehicle.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
15
Roadside Emergencies
244
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
Yellow
70A
Tan
Brown
80A
Natural
Black
Black
Passenger compartment fuse panel
The fuse panel is located behind a trim panel on the left side of the
driver’s footwell near the parking brake. To remove the trim panel, slide
the release lever to the right then pull the trim panel out.
To remove the fuse panel cover, press in the tabs on both sides of the
cover, then pull the cover off.
To reinstall the fuse panel cover, place the top part of the cover on the
fuse panel, then push the bottom part of the cover until it clicks into
place. Gently pull on the cover to make sure it is secure.
To reinstall the trim panel, align the tabs on the bottom of the panel with
the grooves, push the panel shut and slide the release lever to the left to
secure the panel.
To remove a fuse, use the fuse puller tool provided on the fuse panel
cover.
Roadside Emergencies
245
The fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
1
30A
Not used (Spare)
2
15A
High-mount brake lamp (brake
on/off)
3
15A
SYNC
±
module
4
30A
Driver front smart window
5
10A
Keypad illumination (2nd row
seat), Brake shift interlock (BSI)
6
20A
Turn signals
7
10A
Low beam headlamps (left)
8
10A
Low beam headlamps (right)
9
15A
Interior lights, Cargo lamps
10
15A
Backlighting, Puddle lamps
Roadside Emergencies
246
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
11
10A
All wheel drive (AWD)
12
7.5A
Power mirror switch, Driver side
power seat memory, Driver seat
module – keep alive power
13
5A
Satellite radio
14
10A
Power liftgate – keep alive power
15
10A
Climate control, GPS module
16
15A
Not used (spare)
17
20A
All power lock motor feeds,
Liftgate release
18
20A
Amplifier
19
25A
Rear wiper
20
15A
Datalink
21
15A
Fog lamps
22
15A
Park lamps
23
15A
High beam headlamps
24
20A
Horn relay
25
10A
Demand lamps
26
10A
Instrument panel cluster
27
20A
Ignition switch
28
5A
Radio
29
5A
Instrument panel cluster
30
5A
Override cancel
31
10A
Not used (spare)
32
10A
Restraint control module
33
10A
Not used (spare)
34
5A
Steering angle sensor
35
10A
Rear park assist, Yaw rate sensor,
Heated seats
36
5A
Passive anti-theft system
transceiver
37
10A
Climate control
Roadside Emergencies
247
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
38
20A
Subwoofer/amplifier
39
20A
Radio
40
20A
Not used (spare)
41
15A
Automatic dimming rear view
mirror
42
10A
Not used (spare)
43
10A
Rear wiper logic
44
10A
Customer accessory feed
45
5A
Front wiper logic
46
7.5A
Occupant classification sensor
(OCS), Passenger airbag
deactivation indicator (PADI) light
47
30A Circuit
Breaker
Power windows
48
Delayed accessory relay
Power distribution box
The power distribution box is located in the engine compartment. The
power distribution box contains high-current fuses that protect your
vehicle’s main electrical systems from overloads.
WARNING:
Always disconnect the battery before servicing high
current fuses.
WARNING:
To reduce risk of electrical shock, always replace
the cover to the Power Distribution Box before reconnecting the
battery or refilling fluid reservoirs.
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and Specifications
chapter.
Roadside Emergencies
248
The high-current fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
1
Not used
2
Blower motor relay
3
Not used
4
Not used
5
40A**
Cooling fan (vehicles with trailer tow)
60A**
Cooling fan (vehicles without trailer
tow)
6
40A**
Cooling fan (trailer tow only)
7
Not used
8
10A*
Alternator
9
20A*
Trailer tow parking lamps
10
Not used
11
Trailer tow parking lamp relay
12
Not used
13
Not used
14
Not used
15
40A**
ABS pump motor
Roadside Emergencies
249
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
16
30A**
Front heated seats
17
20A**
Cigar lighter/Power point
18
20A**
Panoramic moon roof
19
Fuel pump diode
20
Powertrain control module (PCM)
relay
21
7.5A*
PCM – keep alive power
22
Trailer tow left stop/turn lamp relay
23
One-touch integrated start diode
24
10A*
Trailer tow left stop/turn lamp
25
Rear seat release relay
26
Fuel pump relay
27
10A*
Rear seat release
28
15A*
Heated mirror
29
Heated mirror relay
30
15A*
Vehicle power 1
31
10A*
Vehicle power 3
32
10A*
Vehicle power 2
33
15A*
Vehicle power 4
34
Not used
35
10A*
A/C clutch
36
Not used
37
A/C clutch relay
38
Rear window defroster relay
39
40A**
Rear window defroster
40
Not used
41
30A**
Starter
42
Starter relay
43
Backup lamp relay
44
10A*
Backup lamps
45
Not used
Roadside Emergencies
250
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
46
10A*
Trailer tow right stop/turn lamp
47
Trailer tow right stop/turn lamp relay
48
Run/start relay
49
10A*
PCM ISPR
50
10A*
ABS Run/start
51
Not used
52
5A*
Fuel pump diode feed
53
30A**
Passenger compartment fuse panel
run/start
54
Not used
55
Not used
56
A/C clutch diode
57
40A**
Anti-lock brake system valves
58
30A**
Front wipers
59
30A**
Power liftgate
60
30A**
Driver power seat/memory module
61
30A**
Passenger power seat
62
Not used
63
40A**
Blower motor
64
20A**
Cigar lighter/Power point
65
20A**
Cigar lighter/Power point
66
20A**
Cigar lighter/Power point
67
Not used
68
15A*
Fuel pump
69
Not used
70
Not used
71
10A*
Brake on/off switch (brake lights)
72
Not used
* Mini Fuses ** Cartridge Fuses
Roadside Emergencies
251
CENTER CONSOLE (IF EQUIPPED)
Your vehicle may be equipped with a variety of console features. These
include:
1. Cupholders
2. Tissue box holder (located on
underside of console lid)
3. Rear power point
4. Utility compartment with a
clamshell tray with coin holder and
a removable divider for organizing
and storing personal items including
a laptop computer, MP3 players,
CDs or handbags and, (if equipped)
an ambient light control switch located on the front of the compartment.
WARNING:
Use only soft cups in the cupholder. Hard objects
can injure you in a collision.
AUXILIARY POWER POINT (12VDC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
Auxiliary power points can be found in the following locations:
In the instrument panel
In the center console utility compartment
On the rear side of the center console, accessible from the rear seats
On the left rear quarter panel, accessible from the liftgate or behind
the rear seat
Do not use the power point for operating the cigarette lighter element (if
equipped).
To prevent the fuse from being blown, do not use the power point(s)
over the vehicle capacity of 12 VDC/180W. If the power point or cigar
lighter socket is not working, a fuse may have blown. Refer to
Fuses and
relays
in the
Roadside Emergencies
chapter for information on
checking and replacing fuses.
Driver Controls
77
WARNING:
Never place your arm over the airbag module as a
deploying airbag can result in serious arm fractures or other
injuries.
Steps you can take to properly position yourself away from the airbag:
Move your seat to the rear as far as you can while still reaching the
pedals comfortably.
Recline the seat slightly (one or two degrees) from the upright
position.
WARNING:
Do not put anything on or over the airbag module.
Placing objects on or over the airbag inflation area may cause
those objects to be propelled by the airbag into your face and torso
causing serious injury.
WARNING:
Do not attempt to service, repair, or modify the
airbag supplemental restraint system (SRS) or its fuses. See your
authorized dealer.
WARNING:
Modifying or adding equipment to the front end of
the vehicle (including frame, bumper, front end body structure
and tow hooks) may affect the performance of the airbag system,
increasing the risk of injury. Do not modify the front end of the
vehicle.
Seating and Safety Restraints
148
A difficulty with the system is indicated by one or more of the following:
The readiness light (same light
for front and side airbag system)
will either flash or stay lit.
The readiness light will not
illuminate immediately after ignition is turned on.
A series of five beeps will be heard. The tone pattern will repeat
periodically until the problem and/or light are repaired.
If any of these things happen, even intermittently, have the supplemental
restraint system serviced at an authorized dealer immediately. Unless
serviced, the system may not function properly in the event of a
collision.
Seat-mounted side airbag system
WARNING:
Do not place objects or mount equipment on or
near the airbag cover on the side of the seatbacks of the front
seats or in front seat areas that may come into contact with a
deploying airbag. Failure to follow these instructions may increase the
risk of personal injury in the event of a collision.
WARNING:
Do not use accessory seat covers. The use of
accessory seat covers may prevent the deployment of the side
airbags and increase the risk of injury in an accident.
WARNING:
Do not lean your head on the door. The side airbag
could injure you as it deploys from the side of the seatback.
WARNING:
Do not attempt to service, repair, or modify the
airbag SRS, its fuses or the seat cover on a seat containing an
airbag. Contact your authorized dealer as soon as possible.
WARNING:
All occupants of the vehicle should always wear
their safety belts even when an airbag SRS is provided.
Seating and Safety Restraints
156
Safety Canopy
²
System
WARNING:
Do not place
objects or mount equipment
on or near the headliner at the
siderail that may come into
contact with a deploying Safety
Canopy
±
. Failure to follow these
instructions may increase the risk
of personal injury in the event of a
collision.
WARNING:
Do not lean your head on the door. The Safety
Canopy
±
could injure you as it deploys from the headliner.
WARNING:
Do not attempt to service, repair, or modify the
Safety Canopy
±
System, its fuses, the A, B, C or D pillar trim, or
the headliner on a vehicle containing a Safety Canopy
±
. See your
authorized dealer.
WARNING:
All occupants of the vehicle including the driver
should always wear their safety belts even when an airbag SRS
and Safety Canopy
±
System is provided.
WARNING:
To reduce risk of injury, do not obstruct or place
objects in the deployment path of the inflatable Safety Canopy
±
.
Seating and Safety Restraints
159
Some noise is normal during operation. If the noise is excessive, check
for a low power steering fluid level before seeking service by your
authorized dealer.
Heavy or uneven steering efforts may be caused by a low power
steering fluid level. Check for a low power steering fluid level before
seeking service by your authorized dealer.
Do not fill the power steering fluid reservoir above the MAX mark on
the reservoir.
If the power steering system breaks down (or if the engine is turned
off), you can steer the vehicle manually, but it takes more effort.
If the steering wanders or pulls, check for:
An improperly inflated tire
Uneven tire wear
Loose or worn suspension components
Loose or worn steering components
Improper steering alignment
A high crown in the road or high crosswinds may also make the steering
seem to wander/pull.
BRAKE-SHIFT INTERLOCK
This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the on position unless the brake pedal is pressed.
If you cannot move the gearshift lever out of P (Park) with ignition in
the on position and the brake pedal pressed, it is possible that a fuse has
blown or the vehicle’s brake lamps are not operating properly. Refer to
Fuses and relays
in the
Roadside Emergencies
chapter.
If the fuse is not blown and the brake lamps are working properly, the
following procedure will allow you to move the gearshift lever from P
(Park):
Driving
227
FUEL PUMP SHUT-OFF SWITCH
This device stops the electric fuel pump from sending fuel to the engine
when your vehicle has had a substantial jolt.
After an accident, if the engine cranks but does not start, this switch
may have been activated.
This switch is located behind a
panel on the left side of the cargo
area.
To reset the switch:
1. Turn the ignition to off.
2. Check the fuel system for leaks.
3. If no leaks are apparent, reset the
switch by pressing in on the reset
button.
4. Turn the ignition to on.
5. Wait a few seconds and return
the key to off.
6. Make another check for leaks.
7. If no leaks are apparent, restart
the vehicle.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
15
Roadside Emergencies
243
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
Yellow
70A
Tan
Brown
80A
Natural
Black
Black
Passenger compartment fuse panel
The fuse panel is located behind a trim panel on the left side of the
driver’s footwell near the parking brake. To remove the trim panel, slide
the release lever to the right then pull the trim panel out.
To remove the fuse panel cover, press in the tabs on both sides of the
cover, then pull the cover off.
To reinstall the fuse panel cover, place the top part of the cover on the
fuse panel, then push the bottom part of the cover until it clicks into
place. Gently pull on the cover to make sure it is secure.
To reinstall the trim panel, align the tabs on the bottom of the panel with
the grooves, push the panel shut and slide the release lever to the left to
secure the panel.
To remove a fuse, use the fuse puller tool provided on the fuse panel
cover.
Roadside Emergencies
244
The fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
1
30A
Not used (Spare)
2
15A
High-mount brake lamp (brake
on/off)
3
15A
SYNC
±
module
4
30A
Driver front smart window
5
10A
Keypad illumination (2nd row
seat), Brake shift interlock (BSI)
6
20A
Turn signals
7
10A
Low beam headlamps (left)
8
10A
Low beam headlamps (right)
9
15A
Interior lights, Cargo lamps
10
15A
Backlighting, Puddle lamps
Roadside Emergencies
245
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
11
10A
All-wheel drive (AWD)
12
7.5A
Power mirror switch, Driver side
power seat memory, Driver seat
module – keep alive power
13
5A
Satellite radio
14
10A
Power liftgate – keep alive power
15
10A
Climate control, GPS module
16
15A
Not used (spare)
17
20A
All power lock motor feeds,
Liftgate release
18
20A
Amplifier
19
25A
Rear wiper
20
15A
Datalink
21
15A
Fog lamps
22
15A
Park lamps
23
15A
High beam headlamps
24
20A
Horn relay
25
10A
Demand lamps
26
10A
Instrument panel cluster
27
20A
Ignition switch
28
5A
Radio
29
5A
Instrument panel cluster
30
5A
Override cancel
31
10A
Not used (spare)
32
10A
Restraint control module
33
10A
Not used (spare)
34
5A
Steering angle sensor
35
10A
Rear park assist, Yaw rate sensor,
Heated seats
36
5A
Passive anti-theft system
transceiver
37
10A
Climate control
Roadside Emergencies
246
Fuse/Relay
Location
Fuse Amp
Rating
Protected Circuits
38
20A
Subwoofer/amplifier
39
20A
Radio
40
20A
Not used (spare)
41
15A
Automatic dimming rear view
mirror
42
10A
Not used (spare)
43
10A
Rear wiper logic
44
10A
Customer accessory feed
45
5A
Front wiper logic
46
7.5A
Occupant classification sensor
(OCS), Passenger airbag
deactivation indicator (PADI) light
47
30A Circuit
Breaker
Power windows
48
Delayed accessory relay
Power distribution box
The power distribution box is located in the engine compartment. The
power distribution box contains high-current fuses that protect your
vehicle’s main electrical systems from overloads.
WARNING:
Always disconnect the battery before servicing high
current fuses.
WARNING:
To reduce risk of electrical shock, always replace
the cover to the power distribution box before reconnecting the
battery or refilling fluid reservoirs.
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and Specifications
chapter.
Roadside Emergencies
247
The high-current fuses are coded as follows:
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
1
Not used
2
Blower motor relay
3
Not used
4
Not used
5
40A**
Cooling fan (vehicles with trailer tow)
60A**
Cooling fan (vehicles without trailer
tow)
6
40A**
Cooling fan (trailer tow only)
7
Not used
8
10A*
Alternator
9
20A*
Trailer tow parking lamps
10
Not used
11
Trailer tow parking lamp relay
12
Not used
13
Not used
14
Not used
15
40A**
ABS pump motor
Roadside Emergencies
248
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
16
30A**
Front heated seats
17
20A**
Cigar lighter/Power point
18
20A**
Panoramic moon roof
19
Fuel pump diode
20
Powertrain control module (PCM)
relay
21
7.5A*
PCM – keep alive power
22
Trailer tow left stop/turn lamp relay
23
One-touch integrated start diode
24
10A*
Trailer tow left stop/turn lamp
25
Rear seat release relay
26
Fuel pump relay
27
10A*
Rear seat release
28
15A*
Heated mirror
29
Heated mirror relay
30
15A*
Vehicle power 1
31
10A*
Vehicle power 3
32
10A*
Vehicle power 2
33
15A*
Vehicle power 4
34
Not used
35
10A*
A/C clutch
36
Not used
37
A/C clutch relay
38
Rear window defroster relay
39
40A**
Rear window defroster
40
Not used
41
30A**
Starter
42
Starter relay
43
Backup lamp relay
44
10A*
Backup lamps
45
Not used
46
10A*
Trailer tow right stop/turn lamp
Roadside Emergencies
249
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
47
Trailer tow right stop/turn lamp relay
48
Run/start relay
49
10A*
PCM ISPR
50
10A*
ABS Run/start
51
Not used
52
5A*
Fuel pump diode feed
53
30A**
Passenger compartment fuse panel
run/start
54
Not used
55
Not used
56
A/C clutch diode
57
40A**
Anti-lock brake system valves
58
30A**
Front wipers
59
30A**
Power liftgate
60
30A**
Driver power seat/memory module
61
30A**
Passenger power seat
62
Not used
63
40A**
Blower motor
64
20A**
Cigar lighter/Power point
65
20A**
Cigar lighter/Power point
66
20A**
Cigar lighter/Power point
67
Not used
68
15A*
Fuel pump
69
Not used
70
Not used
71
10A*
Brake on/off switch (brake lights)
72
Not used
* Mini Fuses ** Cartridge Fuses
Roadside Emergencies
250