Ford E-350 - 2008 Fuse Box Diagram

Ford E-350 - 2008 Fuse Box Diagram

3. Press and hold the SELECT
control until VAR appears in the
display, then release. The display
should show the current zone
number.
4. Press the SELECT control until
the desired zone number appears.
The display will flash and then
return to normal operation. The zone is now updated.
Compass calibration adjustment
Perform this adjustment in an open
area free from steel structures and
high voltage lines:
Press and hold the SELECT
control until CAL appears in the
display (approximately eight
seconds) and release.
Drive the vehicle slowly (less
than 5 km/h [3 mph]) in circles until CAL indicator turns off in about
2–3 complete circles.
The compass is now calibrated.
AUXILIARY POWER POINT (12VDC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
The auxiliary power point (equipped
with a cover or a cap plug) is
located on the instrument panel.
A second power point (if equipped)
is located behind the driver’s seat on
the upper trim panel.
Do not use the power point for
operating the cigarette lighter
element (if equipped).
9
VAR
CAL
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
50
To prevent the fuse from being blown, do not use the power point(s)
over the vehicle capacity of 12 VDC/180W. If the power point or cigar
lighter socket is not working, a fuse may have blown. Refer to
Fuses and
relays
in the
Roadside Emergencies
chapter for information on
checking and replacing fuses.
To have full capacity usage of your power point, the engine is required to
be running (in a safe manner) to avoid unintentional discharge of the
battery. To prevent the battery from being discharged:
do not use the power point longer than necessary when the engine is
not running,
do not leave battery chargers, video game adapters, computers and
other devices plugged in overnight or when the vehicle is parked for
extended periods.
Always keep the power point caps closed when not being used.
Cigar/Cigarette lighter (if equipped)
Do not plug optional electrical accessories into the cigarette lighter
socket.
Do not hold the lighter in with your hand while it is heating, this will
damage the lighter element and socket. The lighter will be released from
its heating position when it is ready to be used.
Improper use of the lighter can cause damage not covered by your
warranty.
POWER WINDOWS (IF EQUIPPED)
Do not leave children unattended in the vehicle and do not let
children play with the power windows. They may seriously injure
themselves.
When closing the power windows, you should verify they are free
of obstructions and ensure that children and/or pets are not in
the proximity of the window openings.
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
51
Always transport children 12 years old and under in the back
seat and always properly use appropriate child restraints. Never
place a rear-facing child seat in front of an active airbag. If you must
transport a forward-facing child in the front seat, move the seat all the
way back and use appropriate restraints.
The National Highway Traffic Safety Administration (NHTSA)
recommends a minimum distance of at least 25 cm (10 inches)
between an occupant’s chest and the driver airbag module.
Never place your arm over the air bag module as a deploying air
bag can result in serious arm fractures or other injuries.
To properly position yourself away from the airbag:
Move your seat to the rear as far as you can while still reaching the
pedals comfortably.
Recline the seat slightly one or two degrees from the upright position.
Do not put anything on or over the air bag module. Placing
objects on or over the air bag inflation area may cause those
objects to be propelled by the air bag into your face and torso causing
serious injury.
Do not attempt to service, repair, or modify the airbag
supplemental restraint systems or its fuses. See your authorized
dealer.
Modifying or adding equipment to the front end of the vehicle
(including frame, bumper, front end body structure and tow
hooks) may affect the performance of the airbag system, increasing the
risk of injury. Do not modify the front end of the vehicle.
Additional equipment may affect the performance of the airbag
sensors increasing the risk of injury. Please refer to the
Body
Builders Layout Book
for instructions about the appropriate
installation of additional equipment.
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
87
In the event of an emergency stop, avoid skidding the tires and do not
attempt any sharp steering wheel movements.
Vehicles with a higher center of gravity such as utility and
four-wheel drive vehicles handle differently than vehicles with a
lower center of gravity. Utility and four-wheel drive vehicles are
not
designed for cornering at speeds as high as passenger cars any more
than low-slung sports cars are designed to perform satisfactorily under
off-road conditions. Avoid sharp turns, excessive speed and abrupt
maneuvers in these vehicles. Failure to drive cautiously could result in
an increased risk of loss of vehicle control, vehicle rollover, personal
injury and death.
If the vehicle goes from one type of surface to another (i.e., from
concrete to gravel) there will be a change in the way the vehicle
responds to a maneuver (steering, acceleration or braking). Again,
avoid these abrupt inputs.
AUTOMATIC TRANSMISSION OPERATION
Brake-shift interlock
This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the ON position unless brake pedal is depressed.
If you cannot move the gearshift lever out of P (Park) with ignition in
the ON position and the brake pedal depressed:
1. Apply the parking brake, turn ignition key to LOCK, then remove the
key.
2. Insert the key and turn it to OFF.
Apply the brake pedal and shift
to N (Neutral)
.
3. Start the vehicle.
If it is necessary to use the above procedure to move the gearshift lever,
it is possible that a fuse has blown or the vehicle’s brakelamps are not
operating properly. Refer to
Fuses and relays
in the
Roadside
Emergencies
chapter.
Do not drive your vehicle until you verify that the brakelamps
are working.
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Driving
174
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
Yellow
70A
Tan
Brown
80A
Natural
Black
Black
Passenger compartment fuse panel
The fuse panel is located below and to the left of the steering wheel by
the brake pedal. Remove the panel cover to access the fuses.
15
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
190
To remove a fuse use the fuse puller tool provided on the fuse panel
cover.
The fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
1
Not used
2
10A
Remote Keyless Entry (RKE),
O/D cancel, IVD module, 4W ABS
3
15A
Delayed accessory overhead
console, Audio
4
15A
Courtesy lamps
5
30A
Power locks without RKE or
sliding door
6
10A
Daytime Running Lamps (DRL)
module
7
10A
Multi-function switch, Turn signals
1
2
3
4
5
7
6
8
9
10
11
42
43
44
13
12
14
15
16
17
19
18
20
21
22
23
25
24
26
27
28
29
31
30
32
33
34
35
37
36
38
39
40
41
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
191
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
8
15A
Radio capacitor(s), Ignition coils,
PCM (Powertrain Control Module)
relay
9
5A
Wiper control module
10
20A
Main light switch, Park lamps,
License lamp (external lamps),
Multi-function switch
(flash-to-pass), BSM
11
15A
Multi-function switch (hazards),
Brake lamps, IVD relay
12
15A
Back-up lamps, Auxiliary battery
relay (gasoline engine only)
13
15A
Blend door actuator, A/C mode
14
5A
Instrument cluster
15
5A
Trailer battery charge relay,
Cluster, BSM
16
30A
Power seats
17
5A
Power mirrors
18
Not used
19
Not used
20
10A
Restraints
21
Not used
22
15A
Audio, Instrument cluster,
Courtesy lamp relay, Accessory
delay relay
23
20A
Power locks w/RKE or sliding
door
24
Not used
25
10A
Left headlamp (low beam)
26
20A
Cigar lighter
27
5A
Audio
28
Not used
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
192
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
29
10A
Diagnostics
30
15A
Headlamps (high beam indicator),
DRL
31
10A
Right headlamp (low beam)
32
20A
Power point #1 (instrument
panel)
33
10A
Starter relay
34
Not used
35
Not used
36
5A
Instrument illumination
37
Not used
38
10A
Brake Shift Interlock
39
10A
Trailer tow electric brake, Center
High-Mounted Stop Lamp
(CHMSL)
40
20A
Power point (body B-pillar)
41
30A
Modified vehicle
42
20A circuit
breaker
Power windows
43
Not used
44
30A circuit
breaker
Wiper/washer
Power distribution box
The power distribution box is located in the engine compartment. The
power distribution box contains high-current fuses that protect your
vehicle’s main electrical systems from overloads.
Always disconnect the battery before servicing high current
fuses.
To reduce risk of electrical shock, always replace the cover to
the Power Distribution Box before reconnecting the battery or
refilling fluid reservoirs.
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
193
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and Specifications
chapter.
The high-current fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
1
Powertrain Control Module (PCM)
diode
2
Auxiliary battery diode
3
15A*
Daytime Running Lamps (DRL)
module, A/C clutch
4
5A*
Heated PCV (4.6L and 6.8L
engines)
5
15A*
Horn relay
6
20A
PCM —fuel injectors
7
60A**
Ignition switch, Delayed accessory
delay
8
40A**
Trailer tow battery charge relay
9
50A**
Modified vehicle power
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
194
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
10
30A**
Trailer tow electric brake
controller
11
60A**
4-Wheel Anti-lock Brake System
(4WABS)
40A**
AdvanceTrac
±
with RSC
12
60A**
I/P fuses 29, 34, 35, 40 and 41
13
20A**
Fuel pump relay
14
50A**
Auxiliary blower relay
15
30A**
Main light switch
16
40A**
ABS/IVD
17
50A**
Blower motor relay (blower
motor)
18
60A**
Engine compartment fuses 3, 5
and 26, 23 (diesel) Instrument
panel fuses 26 and 32, PCM start
relay
19
50A**
IDM relay (diesel engine only)
20
60A**
Auxiliary battery relay (gasoline
engine only), PDB fuses 8 and 24
21
30A**
PCM power relay, PDB fuse 27
22
60A**
I/P fuses 4, 5, 10, 11, 16, 17, 22
and 23, Circuit breaker 44
23
10A*
Alternator field (diesel engine
only)
20A*
PCM, VMV, HEGO, MAF, EGR,
(gasoline engine only)
24
20A*
Trailer tow running lamps and
back-up lamp relays
25
Not used
26
20A*
Trailer tow turn signals
27
10A*
PCM KAPWR, Canister vent
(gasoline engine only)
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
195
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
28
Not used
A
Fuel pump relay
B
Horn relay
C
Trailer back-up lamps relay
D
Trailer running lamps relay
E
Trailer battery charge relay
F
IDM relay (diesel only), IVD
(gasoline only)
G
PCM relay
H
Blower motor relay
J
Accessory delay relay
K
Start relay
* Mini fuses ** Maxi fuses
Relay modules
Instrument panel relay module
The instrument panel relay module is located behind the radio in the
center of the instrument panel. Have your authorized dealer service this
module, if required.
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
196
3. Press and hold the SELECT
control until VAR appears in the
display, then release. The display
should show the current zone
number.
4. Press the SELECT control until
the desired zone number appears.
The display will flash and then
return to normal operation. The zone is now updated.
Compass calibration adjustment
Perform this adjustment in an open
area free from steel structures and
high voltage lines:
Press and hold the SELECT
control until CAL appears in the
display (approximately eight
seconds) and release.
Drive the vehicle slowly (less
than 3 mph [5 km/h]) in circles until CAL indicator turns off in about
2–3 complete circles.
The compass is now calibrated.
AUXILIARY POWER POINT (12VDC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
The auxiliary power point (equipped
with a cover or a cap plug) is
located on the instrument panel.
A second power point (if equipped)
is located behind the driver’s seat on
the upper trim panel.
Do not use the power point for operating the cigarette lighter element (if
equipped).
9
VAR
CAL
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
51
To prevent the fuse from being blown, do not use the power point(s)
over the vehicle capacity of 12 VDC/180W. If the power point or cigar
lighter socket is not working, a fuse may have blown. Refer to
Fuses and
relays
in the
Roadside Emergencies
chapter for information on
checking and replacing fuses.
To have full capacity usage of your power point, the engine is required to
be running to avoid unintentional discharge of the battery. To prevent
the battery from being discharged:
do not use the power point longer than necessary when the engine is
not running,
do not leave battery chargers, video game adapters, computers and
other devices plugged in overnight or when the vehicle is parked for
extended periods.
Always keep the power point caps closed when not being used.
Cigar/Cigarette lighter (if equipped)
Do not plug optional electrical accessories into the cigarette lighter
socket.
Do not hold the lighter in with your hand while it is heating, this will
damage the lighter element and socket. The lighter will be released from
its heating position when it is ready to be used.
Improper use of the lighter can cause damage not covered by your warranty.
POWER WINDOWS (IF EQUIPPED)
WARNING:
Do not leave children unattended in the vehicle and
do not let children play with the power windows. They may
seriously injure themselves.
WARNING:
When closing the power windows, you should verify
they are free of obstructions and ensure that children and/or
pets are not in the proximity of the window openings.
Press and hold the bottom part of
the rocker switch to open the
window. Press and hold the top part
of the rocker switch to close the
window.
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
52
WARNING:
Always transport children 12 years old and under in
the back seat and always properly use appropriate child
restraints. Never place a rear-facing child seat in front of an active
airbag. If you must transport a forward-facing child in the front seat,
move the seat all the way back and use appropriate restraints.
WARNING:
National Highway Traffic Safety Administration
(NHTSA) recommends a minimum distance of at least 10 inches
(25 cm) between an occupant’s chest and the driver airbag module.
WARNING:
Never place your arm over the air bag module as a
deploying air bag can result in serious arm fractures or other
injuries.
To properly position yourself away from the airbag:
Move your seat to the rear as far as you can while still reaching the
pedals comfortably.
Recline the seat slightly one or two degrees from the upright position.
WARNING:
Do not put anything on or over the air bag module.
Placing objects on or over the air bag inflation area may cause
those objects to be propelled by the air bag into your face and torso
causing serious injury.
WARNING:
Do not attempt to service, repair, or modify the
airbag supplemental restraint systems or its fuses. See your
authorized dealer.
WARNING:
Modifying or adding equipment to the front end of
the vehicle (including frame, bumper, front end body structure
and tow hooks) may affect the performance of the airbag system,
increasing the risk of injury. Do not modify the front end of the
vehicle.
WARNING:
Additional equipment may affect the performance of
the airbag sensors increasing the risk of injury. Please refer to
the
Body Builders Layout Book
for instructions about the appropriate
installation of additional equipment.
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
88
WARNING:
Vehicles with a higher center of gravity such as
utility and four-wheel drive vehicles handle differently than
vehicles with a lower center of gravity. Utility and four-wheel drive
vehicles are
not
designed for cornering at speeds as high as passenger
cars any more than low-slung sports cars are designed to perform
satisfactorily under off-road conditions. Avoid sharp turns, excessive
speed and abrupt maneuvers in these vehicles. Failure to drive
cautiously could result in an increased risk of loss of vehicle control,
vehicle rollover, personal injury and death.
If the vehicle goes from one type of surface to another (i.e., from
concrete to gravel) there will be a change in the way the vehicle
responds to a maneuver (steering, acceleration or braking). Again,
avoid these abrupt inputs.
AUTOMATIC TRANSMISSION OPERATION
Brake-shift interlock
The vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) unless the brake
pedal is depressed.
If you cannot move the gearshift lever out of P (Park) position with the
ignition in the (4) ON position and the brake pedal depressed, a
malfunction may have occurred. It is possible that a fuse has blown or
the vehicle’s brakelamps are not operating properly. Refer to
Fuses and
relays
in the
Roadside Emergencies
chapter. If the fuses and
brakelamps are working properly, and the vehicle still will not shift out of
(P) Park, see your authorized dealer for service.
In an emergency, to disable the malfunctioning brake-shift interlock
feature in order to shift the vehicle from P(Park) follow these steps:
WARNING:
To prevent vehicle movement when following this
procedure, park on a level surface, ensure parking brake is set,
and block the rear wheels.
1. Apply the parking brake. Turn key to the 2 (lock), and then remove
the key.
2. Disconnect the negative (Black) battery cable from the battery.
3. Insert the key and turn to 3 (off). Shift to N (Neutral).
4. Reconnect the negative (Black) battery cable to the battery.
5. Start the vehicle.
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Driving
176
On commercial stripped chassis
vehicles, this switch is located on a
bracket above the brake pedal.
To reset the switch:
1. Turn the ignition OFF.
2. Check the fuel system for leaks.
3. If no leaks are apparent, reset the
switch by pushing in on the reset
button.
4. Turn the ignition ON.
5. Wait a few seconds and return
the key to OFF.
6. Make another check for leaks.
FUSES AND RELAYS
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.
Note:
Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
15
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
192
Standard fuse amperage rating and color
COLOR
Fuse
rating
Mini
fuses
Standard
fuses
Maxi
fuses
Cartridge
maxi
fuses
Fuse link
cartridge
2A
Grey
Grey
3A
Violet
Violet
4A
Pink
Pink
5A
Tan
Tan
7.5A
Brown
Brown
10A
Red
Red
15A
Blue
Blue
20A
Yellow
Yellow
Yellow
Blue
Blue
25A
Natural
Natural
30A
Green
Green
Green
Pink
Pink
40A
Orange
Green
Green
50A
Red
Red
Red
60A
Blue
Yellow
Yellow
70A
Tan
Brown
80A
Natural
Black
Black
Passenger compartment fuse panel
The fuse panel is located below and to the left of the steering wheel by
the brake pedal. Remove the panel cover to access the fuses.
To remove a fuse use the fuse puller tool provided on the fuse panel
cover.
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
193
The fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
1
Not used
2
10A
Remote Keyless Entry (RKE),
O/D cancel, IVD module, 4W ABS
3
15A
Delayed accessory overhead
console, Audio
4
15A
Courtesy lamps
5
30A
Power door locks without BSM
6
10A
Daytime Running Lamps (DRL)
module, Reverse Park Aid (RPA)
7
10A
Multi-function switch, Turn signals
8
15A
Radio capacitor(s), Ignition coils,
PCM (Powertrain Control Module)
relay
1
2
3
4
5
7
6
8
9
10
11
42
43
44
13
12
14
15
16
17
19
18
20
21
22
23
25
24
26
27
28
29
31
30
32
33
34
35
37
36
38
39
40
41
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
194
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
9
5A
Wiper control module
10
20A
Main light switch, Park lamps,
License lamp (external lamps),
Multi-function switch
(flash-to-pass), BSM
11
15A
Multi-function switch (hazards),
Brake lamps, IVD relay
12
15A
Back-up lamps, Auxiliary battery
relay (gasoline engine only)
13
15A
Blend door actuator, A/C mode
14
5A
Instrument cluster
15
5A
Trailer battery charge relay,
Cluster, BSM
16
30A
Power seats
17
5A
Power mirrors
18
Not used
19
Not used
20
10A
Restraints
21
Not used
22
15A
Audio, Instrument cluster,
Courtesy lamp relay, Accessory
delay relay
23
20A
Power locks w/RKE or sliding
door
24
Not used
25
10A
Left headlamp (low beam)
26
20A
Cigar lighter
27
5A
Audio
28
Not used
29
10A
Diagnostics
30
15A
Headlamps (high beam indicator),
DRL
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
195
Fuse/Relay
Location
Fuse Amp
Rating
Passenger Compartment Fuse
Panel Description
31
10A
Right headlamp (low beam)
32
20A
Power point #1 (instrument
panel)
33
10A
Starter relay
34
Not used
35
Not used
36
5A
Instrument illumination
37
15A
Ignition switch
38
10A
Brake Shift Interlock
39
10A
Trailer tow electric brake, Center
High-Mounted Stop Lamp
(CHMSL)
40
20A
Power point (body B-pillar)
41
30A
Modified vehicle
42
20A circuit
breaker
Power windows
43
Not used
44
30A circuit
breaker
Wiper/washer
Power distribution box
The power distribution box is located in the engine compartment. The
power distribution box contains high-current fuses that protect your
vehicle’s main electrical systems from overloads.
WARNING:
Always disconnect the battery before servicing high
current fuses.
WARNING:
To reduce risk of electrical shock, always replace
the cover to the Power Distribution Box before reconnecting the
battery or refilling fluid reservoirs.
If your vehicle is equipped with an auxiliary battery,
disconnecting the primary under-hood battery DOES NOT remove
power from all circuits.
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
196
If the battery has been disconnected and reconnected, refer to the
Battery
section of the
Maintenance and Specifications
chapter.
The high-current fuses are coded as follows.
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
1
Powertrain Control Module (PCM)
diode
2
Auxiliary battery diode
3
15A*
Daytime Running Lamps (DRL)
module, A/C clutch
4
5A*
Heated PCV (4.6L and 6.8L
engines)
5
15A*
Horn relay
6
20A
PCM —fuel injectors
7
60A**
Ignition switch, Delayed accessory
delay
8
40A**
Trailer tow battery charge relay
9
50A**
Modified vehicle power
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
197
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
10
30A**
Trailer tow electric brake
controller
11
40A**
4-Wheel Anti-lock Brake System
(4WABS) and Flex fuel (FF)
module (if equipped), or
AdvanceTrac
±
with RSC.
12
60A**
I/P fuses 29, 34, 35, 40 and 41
13
20A**
Fuel pump relay
14
50A**
Auxiliary blower relay
15
30A**
Main light switch
16
40A**
ABS/IVD
17
50A**
Blower motor relay (blower
motor)
18
60A**
Engine compartment fuses 3, 5
and 26, 23 (diesel) Instrument
panel fuses 26 and 32, PCM start
relay
19
50A**
IDM relay (diesel engine only)
20
60A**
Auxiliary battery relay (gasoline
engine only), PDB fuses 8 and 24
21
30A**
PCM power relay, PDB fuse 27
22
60A**
I/P fuses 4, 5, 10, 11, 16, 17, 22
and 23, Circuit breaker 44
23
10A*
Alternator field (diesel engine
only)
20A*
PCM, VMV, HEGO, MAF, EGR,
(gasoline engine only)
24
20A*
Trailer tow running lamps and
back-up lamp relays
25
Not used
26
20A*
Trailer tow turn signals
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
198
Fuse/Relay
Location
Fuse Amp
Rating
Power Distribution Box
Description
27
10A*
PCM KAPWR, Canister vent
(gasoline engine only)
28
Not used
A
Fuel pump relay
B
Horn relay
C
Trailer back-up lamps relay
D
Trailer running lamps relay
E
Trailer battery charge relay
F
IDM relay (diesel only), IVD
(gasoline only)
G
PCM relay
H
Blower motor relay
J
Accessory delay relay
K
Start relay
* Mini fuses ** Maxi fuses
Relay modules
Instrument panel relay module
The instrument panel relay module is located behind the radio in the
center of the instrument panel. Have your authorized dealer service this
module, if required.
2008 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Roadside Emergencies
199